We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Clamping box, clamping cube, clamping angle, box angle PAGUS 1745 x 550 x 400 mm two clamping surfaces 1745 x 550 mm with two openings each 650 x 240 mm all threads M20 x 3.0 two clamping surfaces 1745 x 400 mm with two openings each 650 x 200 mm two side faces 550 x 400 mm with two openings each 240 x 200 mm Material: cast iron used, tested ! Dimensions: 1745 x 550 x 400 mm
used
The equipment presented is a weighing line equipped with a weighing machine type VPV45 Duo, it is composed of the following elements: - An elevator belt type goose neck type - An oscillating feed belt - One WEIGMA multihead weigher with double head vibrating lane 2 VPV45 (two channels) - A screened enclosure, with a wicket door access - A touch keyboard to program the weigher - A remote control panel - A remote emergency stop box - A double chute goes up and down - A supply item such as tray - A step-by-step conveyor belt - An electrical cabinet - A checkout support trolley The machine was used very little. Documentation, certificate of conformity, food certification available. The weight range of the weigher is from 10 gr. to 2000 g. The scale is designed for homogeneous size products with a maximum length of 55 mm. The weigher can reach approx 25 weights per minut ...
used
Used APV Evaporation Plant Manufacturer: APV Model: Evaporation Plant The Plant that follows was previously used for Cider Evaporation. It is however possible that this standard plate evaporation system which was manufactured by APV could be converted for other evaporation The information to follow is the description of the Plant including an itemised listing of equipment which is currently located at our works in Rossington, Doncaster. The Evaporator is a specially designed plate heat exchanger. It comprises a number of pressed stainless steel plates separated by rubber gaskets and clamped between a fixed steel had and a movable steel head. The plates are made with connection ports so that on one side of each plate is vacuum steam condensing at approximately 70°C. On the other side is cider under vacuum and boiling at approximately 50°C as it runs in a thin film down the plat ...
used
Used APV Evaporation Plant Manufacturer: APV Model: Evaporation Plant The Plant that follows was previously used for Cider Evaporation. It is however possible that this standard plate evaporation system which was manufactured by APV could be converted for other evaporation The information to follow is the description of the Plant including an itemised listing of equipment which is currently located at our works in Rossington, Doncaster. The Evaporator is a specially designed plate heat exchanger. It comprises a number of pressed stainless steel plates separated by rubber gaskets and clamped between a fixed steel had and a movable steel head. The plates are made with connection ports so that on one side of each plate is vacuum steam condensing at approximately 70°C. On the other side is cider under vacuum and boiling at approximately 50°C as it runs in a thin film down the plat ...
used
Used machine for production of shortbread cookies with filling model MAX DROP CNC DUO Manufacturer HASBORG Rakszawa Poland Year of production 2009 CE mark Installed power: 2 kW power supply: 3 x 400V two-head - head 1 = two rollers, shortcrust / gingerbread / sponge-fatty pastry - head 2 = two rollers, mobile station attached optionally, fruit fillings, cream fillings, sprinkles 9 nozzles for exchange of dozens of tips squeeze cakes (plus with lowering) curly extruded cookies (plus with lowering) curly cookies curly cookies with lowering, filled cookies long cookies continuous pouring optional: string cut cookies With this compact machine, a very wide range of different pastries can be produced, including filled pastries in the center. The MAX DROP CNC DUO is equipped with two tanks for dough (e.g., two colors) or dough and filling. It includes a bar with ...
used
GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...
used
GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...
used
GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...
used
SOLO 202 30/30/60 quenching machine built in 2001 in Switzerland, is a multifunctional machine used in the process of workpiece quenching. The quenching process improves the mechanical properties of the workpiece by increasing its strength and wear resistance. The machine’s extensive machining capabilities and high performance allow the following types of metal heat treatment to be performed: – austenitizing (in atmosphere, protective gas or nitrogen) – carburizing – carbonitriding – water quenching – tempering (without protective gas) – alkaline spray washing – annealing The SOLO quenching machine of multi-module construction is equipped with two quenching furnaces (a bell furnace and a tempering furnace), two tanks (an oil bath and a water tank) and a spray washing machine with a two-section oil separator for load washing. The furnaces, made of top-quality she ...
used
Multisaw Edger FOD DPPA-II-50-E with lasers – production in Poland – DTR – fixed sleeve - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speed - power of the feed motor 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electric disc spacing adjustment - fixed edging sleeve 60 mm - one movable shield - two rows of anti-recoil pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 250x165x220 cm weight ~ 2000 kg Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in the central point, in the horizontal axis, on which tools in t ...
used
1 post PILZ safety relays, a total of 46 units, consisting of: 1.Pilz PNOZ1 (for emergency stop and protection doors), ID 475695: 5 piece 2.Pilz PNOZ (for emergency stop and protection doors), tag 474695: 5 piece 3.Pilz PNOZ 5(NOT-AUS-Schaltgerät), tag 474590: 1 piece 4.Pilz PNOZ 8 (for emergency stop and protection doors), tag 474760: 1 piece 5.Pilz PNOZ X 2.1 (for emergency stop and protection doors), tag 774306: 1 piece 6.PILZ PNOZ X 2 (for emergency stop and protection doors), tag 774303: 1 piece 7.Pilz PZE 9 (contact expander module), tag 774150: 5 piece 8.Pilz PZE X4P (contact expander module), ID 777585: 1 piece 9.Pilz t & a 5V (guard door monitoring), tag 474965: 1 piece 10.Pilz PNOZ X 7 (for emergency stop), tag 774059: 1 piece 11.PILZ PNOZ X8P, tag 777760: 5 pieces, (for emergency stop, safety doors and light barriers) 12.Pilz PNOZ X3P, ident 777310: ...
used
The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the roll ...
used
Key data: 1435
Turning diameter: 1435 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW Fields of application machining of two wheel sets at the same time turning of wheel tyre profiles on wheel sets in situ machining of brake discs on wheel sets in situ machining of single wheel sets machining of coupled wheel sets machining of wheel sets of different gauges on all mainline railway, metro and tram vehicles Rail track gauge: 1.435mm Max. wheel tread Ø:1.400mm Min. wheel tread Ø:500mm Number of slides: 2 + 2 Power: 2 x 30 kW Length: 7.000 mm Width: 8.000 mm Height: 2.600 mm Weight: 32.000 kg The tandem a ...
used
Stock# U2333-10 Used stainless steel vertical lifting device for rising and tilting pans. Working height of rising up to 320 cm. Total height of the tower 396 cm. Machine is equipped with stainless steel cart for mounting pans with distance between holders 1115 mm. Pan is tilted manually through gearbox. Machine is equipped with electrically driven hoist with working capacity up to 500 kg. Together with machine are included two stainless steel pans: First with volume 350 l - made by Kates (PL). Tank has internal dimensions: diameter 770 mm x length of straight side of wall 760 mm. Flat bottom, no discharge outlet. Top open, with stainless steel cover mounted on eigth clamps. Tank has two side wall shafts/supports for tilt discharge. Pan is mounted on mobile stainless steel platform. Second with volume 250 l - made by Kates (PL). Tank has internal dimensions: diameter 630 mm x len ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-63A DIN 69893 ...
new
CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end produc ...
used
VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...
new
Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display planing thickness: mech. Counter; Feed speed: 5 / 8 / 12 / 18; Feed roller: steel; Pressure beams: articulated; Pull-out roller: rubber; Table rollers: no; Motor power: 9 kW; Suction port: 150mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 810 kg; Motorized thicknessing table stroke with two speeds Numerical display for working height Thickness table made of cast iron The thicknessing table is mounted on four large trapezoidal threaded spindles for maximum stability and precision Four feed speeds Optionally with two rollers in the thickness table Standard with noise protection and chip protection curtain on the workpiece inlet and outlet roller contact pressure adjustable Front feed roller with helical gear Pull-out roller with rubber ...
used
Main Parameter Remark: Print material thickness, width should match with setting tension. ors: 6 colors Register precision: ±0.10mm Printing repeat length: 400-800mm Dycril plate and double faced Max. mechanical speed: 250m/min Running speed: 15-200 m/min, Actual speed influenced by below factors: Printing plate perimeter Printing material Max. Substrate width: 1270mm Printing width: 1250mm Printing col Substrate: Paper: 30---300 gsm adhesive tape option together: 1.14+0.55mm Remark: Sleeve system 3 Ink and solvent Printing typography and quality Web direction: Print unit on the right side of rewind unit (stand in operation side to observe web direction) Ink type: Water based ink, alcohols based ink and solvent based ink. Driven method: Gear drive Register control: Manually operation ...
used
Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...
used
roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...
used
Genie GS-2046 Self-Propelled Scissor Lift The quiet, emission-free Genie GS-2046 scissor lift is the ideal machine for construction site, maintenance and installation applications on solid surfaces, indoors and outdoors. With an impressive working height of 8.10 m, it offers sufficient space and stability for workers and equipment Manufacturer: Genie Model No.: GS-2046 Year of construction: 2005 Equipment • Folding railing with full-height platform swinging door • Joystick control: two lifting and travel speeds & two pre-selectable speed levels • User-friendly diagnostic system • Platform control panel with battery charge indicator • Fully integrated diagnostic system • Power cable to platform • Attachment points for harnesses • Emergency release valve for manual lowering of the platform • Emergency stop switch on platform and floor control pane ...
used
The CEA ATM 18/18 was conceived to be introduced in the modern Pharmaceutical production line. It is placed after the filling and sterilization line, before the labeling and packaging line. The ampoules and/or vials are loaded manually on the loading plane of the ATM machine 18/18 by trays. The output of the rejected and approved ampoules and/or vials are respectively collected in separate trays. Formats: 1-2-5 ml Technical characteristics: • Dimension ampoules and bottles: Diameter Ø from 9 to 18 mm total height up to 100 mm • Mechanical speed: 18,000 vials/hour max. for 1 – 2 ml ampoule • Rotation speed: continuously adjustable from 500 to 3000 rpm • Power supply: 230V ± 10% 50/60 Hz 1Ph • The Client must guarantee a voltage fluctuation of no more than 10% • Absorbed power: 5 Kw • Loading/unloading plane height: 900 mm (adjustable ± 25 mm) • Dimens ...
used
Fully automatic system with 1 vibrating press locksmith BH 30 For production e.g. : - Concrete blocks, bricks, partition bricks - Soundstones -Curbs - Fireplace stones -Gutter - Ceiling stones, etc. - Stationary vibropress BH 30 with two filling parts for two-layer products - Chain conveyors for fresh side - Sliding tracks for dry side - 1x mast and 1x lowering scaffold - Kuboter for the removal of hardened stones from the return transport on the parcel transport - Production pallets 1400x800mm – 0 pcs Product height : from 55 to 550 mm The new automation : Siemens S7 The control of the vibrator with frequency converter Incl. approx. 5 pcs, different shapes Fully automatic system with 1 vibropress locksmith BH 30 for production of for example concrete blocks, wall stones, partition stoner -Sonic Stones -curbs -fireplace stones -Gutter -ceiling stones -stationa ...
used
Busch BLS Die-Cutting machine for labels Age: 2017 Max. die cut size: 230 x 320 mm Min. cut size: 20 x 20 mm Max. stack height: 190 mm Die-Cutting pressure: 5700 kg Max. -Cutting strokes: 16 p/min Max. Performance: 960,000 sheets/hour With trolley and delivery tray With control panel With light barrier With waste conveyor With different die tools The die-cutter is most commonly used for cutting contours of large-sized labels, brochures, children's booklets, credit and loyalty cards, for die-cutting in a two-up system and for counter-pressure cutting with special material for inmould labels. The machines process high volumes of all types of products. These are just some of the wide range of items produced. Labels are, of course, the most important: -Labels of all sorts -Large-sized labels for tins and jars -Inmould labels -Stitched, folded and glued brochures ...
used
CNC Universal Bed Type Milling Machine Condition very good –11000 operating hours only Inspect under power IS POSSIBLLE Manufacturer Soraluce Model TA-A 25 Year 2018 Control Heidenhain TNC 640 Table size 2700 x 1000 mm Table load max. 6700 kg T-Slots 6 x 22 H12 Reference slot 1 x 22 H8 Distance between T-Slots 140 mm Travels Longitudinal travel X 2500 mm Vertical travel Z 1250 mm Cross travel Y 1200 mm Through the two horizontal positions forward of the automatically swiveling milling head the vertical machining can be extended by 500 mm (up to 1750 mm). Feed thrust X/Y/Z 10000 N Rapids X/Y/Z 25000 mm/min. Average Acceleration 2 m/s2 Automatic indexing milling head Number of swivelling positions 0.001° x 0.001° Positions in ...
used
Number of motors: 2 Stück 0: 2380 mm Control: , 0 RUCHSER RU-GL-45° ----------------------------------------------------- Glazing bead saw at the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck right saw on carriage mounted to be moved manually. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000 ----------------------------------------------------- for glazing beads up to 30 ...
used
The grinding block machine from Oskar Pensel & Sohn Jserlohn is a powerful tool for professional use in workshops and industrial companies. With a robust construction and high-quality components, it offers a reliable and precise grinding solution. This grinder machine is equipped with two grinding wheels that offer speeds of 1700 and 2200 revolutions per minute (rpm). Thanks to the two independent motors, each with 2.2 hp power, you can adjust the speed to your requirements and efficiently process a wide range of materials. The machine type 764M15B is characterized by its high stability and durability. It provides a solid base for precise grinding and allows you to have precise control over the grinding process. The grinding block machine is ideal for deburring, sharpening, polishing and forming various workpieces. For further details about the grinder block machine, please do n ...
used
Documents drawings_information_parr_5410.pdf equilabo_offer_details.pdf Technical details The distinguishing feature of a fluidised bed reactor is that the bed of solid particles or catalyst is supported by a rising gas stream. This reactor allows the catalyst to be easily loaded and removed. This is advantageous when the solids bed has to be removed and replaced frequently. High conversion at high throughput is possible with this style of reactor. These reactors inherently have excellent heat transfer and mixing characteristics. GAS FEED: Two reactant gas feed lines, each with normally-closed automated pneumatic shut-off valve, filter, bypass valve, and reverse-flow check valve. One gas feed line has a mass flow controller sized for up to 0.5-25 SLPM of nitrogen with up to 2 bar delivery pressure. The other gas feed line has a mass flow controller rated for up to 50 ...
used
Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment and speed control Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Inclined doweling and stake drilling are easy to implement thanks to the rotatable drilling unit. Frequency-controlled motor with frequency converter, speed adjustment via potentiometer Motor power 1.5 kW Start of the engine with practical handle switch Precision chuck with two inserts 13 + 16mm Additional Röhm two-jaw chuck up to 20mm intake Preparation for drill heads Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated by 65 degrees to the left and right Pneumatic adjustment of the machining height, dowels on two levels without repositioning The desired drilling heights can be set fo ...
used
Bottle Crate Vertical Storage System SIMONAZZI EX 4532017 An automatic crate magazine storage system made by SASIB in 1998. The system consists of two magazine storages, one for 792 crates and another for 264 crates. The larger magazine stacks crates in two parallel rows, it has two infeed and two outfeed conveyors, and the storage capacity is up to 792 crates. The other magazine has one infeed and one outfeed conveyors the capacity is up to 264 crates The storage magazines have been used as buffers between crate washer and packer and before palletizer. The capacity of the original line was 80.000 bph. Technical data Manufacturer: SASIB Beverages S.p.A., Italy / ABB Manufacturing year: 1998 Model: SIMONAZZI Magazzino Casse Vertical Capacity storage 1: 792 crates Capacity storage 2: 264 crates Control PLC Siemens S7 series
used
Labeling Machine Krones Contiroll WrapAround 36000 bph Fully operational WrapAround OPP labeler Krones Contiroll Solomatic for plastic and paper labels feed from two rotating reels and glued with hot melt glue. Labeler was manufactured in 2007 and it has two label applicators, both with two label reels with automatic splicing from one reel to another. It is suitable for labelling glass, plastic and metal containers with wrap-around labels. Two narrow strips of hotmelt, which are applied by a heated glue roller to the leading and trailing label edges, glue the labels together. Container plates are driven by a toothed belt and servomotor. This machine has been used for 500ml PET bottles only but it can be adjusted for 500ml to 2000ml bottles as well, max diameter being 105mm. Control PLS are Siemens Simatic S7 series with color touch screens. Technical characteristics Manufactur ...
used
Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...
used
Spiral mixer Memak Otto 100 Robust, powerful and quiet dough mixer. Made of steel. The precise and simple mechanical construction ensures maximum durability and minimum maintenance of this spiral dough mixer. The power transmission system with BELT makes this device the quietest of its type. The special shape of the spiral and the rotation speed of the spiral synchronized with the rotation speed of the bowl brings the dough together in a few minutes and gives a larger volume and an airy structure to the dough. Thanks to the solid body, these spiral mixers are suitable for use in small bakeries and for well-hydrated dough mixtures. These machines provide an excellent test result and practically do not require maintenance. Standard features: • Spiral mixer with fixed bowl with two motors, one for the bowl and one for the spiral hook • Two speeds, two electronics • Two-way ...
used
Used Syrup Room A DUE SYRUP ROOM 1999 The syrup room is in excellent condition almost new barely used Components One Sugar dissolving tank with pasteurizer and filtration One Sugar loading screw conveyor Two 10 000 L tanks Two 20 000 L tanks One Tray One walkway connecting silos One Pasteurizer 2500 l h ONE DISSOLUTION TANK 10 000 L capacity the tank is composed of the following components 1 Conical manhole top cover 2 Pasteurization and filtration system for sugar solution 3 Central cylindrical plating 4 Cone shaped bottom 5 Square support feet 6 Vertical agitator group 7 Supply pumps ONE LOADING SCREW ELEVATOR 12 000 kg h flow loading screw to be used to load crystalline sugar It is composed of Hopper Easel Loading screw Motor gearmotor group Protective grid ONE PASTEURIZER 2500L h Pasteurizer made of AISI 316 and 304 steel components 1 Plate heat exchangers 2 Thermoregulator tool 3 Fl ...
used
Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...
used
Used in Oil and gas exploration and Petroleum Refinery. The liquid flows through the bundle of tubes in a chamber where the exchange of heat occurs. It is mostly suited for high pressure applications. Two fluids flow through the chamber with different temperatures one through the tubes and other flows inside the chamber. A heat exchanger is a device used to transfer heat between two or more fluids. There are different categories of tubular heat exchangers; one of the most common is the shell and tube exchanger. A shell and tube exchanger consists of a number of tubes mounted inside a cylindrical shell. Two fluids can exchange heat: one fluid flows over the outside of the tubes while the second fluid flows through the tubes. The fluids can be single or two phases and can flow in a parallel or a cross/counter flow arrangement. The shell and tube exchanger consists of four major ...
used
STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...
used
Stainless steel chimney Dimensions: Height: 23.5 m Diameter: approx. 1 m Material: 1.4301 (V2A) Chimney consists of two parts each 12 meters, which are screwed! Frames run to top thin-walled. Construction: Frames length: 2 meters Material thickness of frame: Skirt: 8 mm (steel) Following two frames: 6 mm (1.4301) Following two frames: 4 mm (1.4301) Remaining frames: 3 mm (1.4301) In very good condition!
used
Two hydraulic valves from Rexroth, two hydraulic pumps and 5 hydraulic cylinders are offered, all new and indispensable as spare parts 1. 2 Stueck Rexroth Valves MNR: R900912485 DBW 10 B2-52/315-6EW230N9K4 FD: 48121 2. Voac Parker Hydraulics made in Sweden Part No. 3708719 Type F11-058-M8-CF-K-000 Ser No. 2000180541 3. Brueninghaus Hydromatik D-72160 Horb A10VSO 71 DR / 31R PPA12N00 FabrNr: 1117486 Bauj. 04/96 DR = 280 bar Vo =71 cm3 n=1500 min 4. 5 unused, two-sided hydraulic cylinders with bearings Type 70/50-280-625 Length from middle hole to middle hole approx. 625mm Total length approx. 750mm Piston diameter 70mm Rod diameter 50mm Piston path 280mm Special price
used
Diosna spiral mixer SPV 160 AD with 2 telescopic boiler For up to 160kg dough per Pan Kneading tool made of stainless steel Includes two stainless steel bowls Timer with two watches Two speeds Friction wheel drive Condition: reconditioned; checked and cleaned
used
Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blaw-Knox in 1923. • Ma ...
new
Compact 50l compressor with two very powerful, silent direct drive motors. Designed for workshops, dental offices and other places where regular compressors are too loud. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek SilentPro50-2 2.2kW: -Two powerful 1100W electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 2x1100(2200) Motor speed, Rpm: 1440 Air supply, L/min: 420 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 80 Air tank, L: 50 Dimensions(length x width x height), mm: 700x340x600 Weight, kg: 38 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 715x365x650 Weight, kg: 43 Tracking: ...
used
Used Heuft Glass Empty Bottle Inspector InLine reflexx Device No. 2ZG042943 Condition: very good, ready for use at short notice · Original delivery date 12.2011 · Power max. 46,000 fl./h · Pass direction from left to right · Two triggers · Secomak blower instead of compressed air · Transponder detection for RFID test bottles · Discharge monitoring · Network Heuft Hlan (Upgrade Optional) · Hayt two ways discharge Delta K to the right · 4 Variety Licenses · Tripartite Delta K for band height of 1130 · Two fluids for lye detection Not available! · inlet control, must be supplemented if necessary · Thread edging, must be supplemented if required · The documentation is complet ...
used
Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...
used
This production cell makes it possible to dose rillette in bowls. It consists of seven parts: 1. A protective enclosure for the safety of personnel. 2. A rotating tray with 8 stations, each equipped with two cells. At each station, two bowls are processed simultaneously. 3. A depilation station at the head of production that allows two bowls to be depilated jointly. 4. A 2-head dosing station. 5. A sealing set. 6. An ejection station for the bowls produced. 7. A conveyor belt to evacuate the bowls to the customer's equipment. Technical characteristics of the machine: – Construction date: 2017 – Power: 4.5 kW. – Voltage: 400 V. – Phases: 3PH + T – Pressure: 6 bar. – Air flow: 10 m³/h.
new
Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5 ...
used
pressure: 85 t chamfer lenght: 2000 mm distance between columns: 1750 mm Control: TRUMPF Delem DA 65T total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m T R U M P F (Germany) CNC - Controlled Hydraulic Press Brake Model TRUMABEND V 85, year 1996 Serial No. 88 31 52 ______________________________________________________________________ ____________ Pressure, max. 85 to Working width, max. 2.050 mm Working width between columns 1,750 mm Side daylight of each column 410 mm Max. distance between upper and lower tool holder w/o tools 350 mm Adjustment of upper tool holder approx. 300 mm Table width approx 105 mm Height of Table from floor approx. 1.050 mm Max. stroke 215 mm ...