two for one used for sale

Two-point measuring head, measuring head, measuring device OFD, FEINMESS DRESDEN ZP2 I3.1 Z-Nr.: 78 21 02 : 025.26 ca. 5,0 m Connection cable with shipping container: Z-Nr.: 78 21 01 : 024.25 and accessories New ! Dimensions ( without cable ): 170 x 130 x 55 mm Dimensions ( shipping container ): 500 x 380 x 210 mm

pneumatic foot switch, foot switch, foot switch PAGUS function button RAISE & LOWER button operation generates an air blast Operating area: 165 x 95 mm, Material: stainless steel New ! Dimensions: 165 x 95 x 25 mm

Impeller, two blades, for food pump NAGEMA Ø 125 mm width: 35 mm for shaft diameter: 18 mm spare part for NAGEMA centrifugal pump KRP... ! New ! Stainless steel ! Dimension 130 x 130 x 40 mm

Pump wheel, two blades, for food pump NAGEMA Ø 160 mm width: 37 mm for shaft diameter: 18 mm spare part for NAGEMA centrifugal pump KRP... ! New , stainless steel ! Dimensions 160 x 160 x 40 mm

Two-piece pipe clamp with 2-threaded nut, different sizes, 149 pieces SIKLA 2x Stable D-3G 196 - 203 mm 56x Ratio LS 157445 38 - 45 mm 68x Ratio LS 157436 28 - 35 mm 4x Ratio LS 157427 21 - 27 mm 19x FISCHER 1/2 20 - 24 mm Material: Steel, galvanized, silicone New ! Dimensions ( packaging ): 410 x 310 x 230 mm

KS connector, KS connector, clamping screw connector, 23 pieces DEHN + SÖHNE Two-piece, spacing: 20 mm screw and nut: M10 x 1,1,5 Round conductor diameter: Ø 8 - 10.5 mm Rope cross-section: 50 - 86 mm² Material: galvanized steel New ! Dimensions (KS connector): 46 x 25 x 40 mm Dimensions ( packaging ): 200 x 120 x 80 mm

Two-piece pipe clamp with nut, stainless steel pipe clamp, 21 pieces FALU 4x 3/4 ( inch ) 17x 1 ( inch ) Clamp width: 30 mm Thread: M8 x 1.25, Depth: 10 mm Material: Stainless steel Other quantities on request ! New ! Dimensions ( packaging ): 200 x 140 x 60 mm

Two-hand machine control, safety two-hand control switch SQUARE D, HIGH-VOLTAGE CURRENT GUMMERSBACH ZHB Accident protection system PREVENTA with emergency off ! used. tested ! Dimensions: 460 x 165 x 145 mm

Filling valve with two level sensors PAGUS DN 15 Immersion depth: 870 mm switching point level sensor : 840 / 800 mm ( not changeable ) Thread: 2 ( inches ) male thread pipe connection: 1 1/4 ( inches ) inner diameter pipe connection: Ø 17 mm Material: Plastic New ! Dimensions ( valve ): 970 x 115 x 115 mm Dimensions ( packaging ): 1180 x 200 x 200 mm

Sr. No.: 70218 Equipment / Additional information: Various tools

Unused and not yet fully assembled two-chamber industrial washing machine, is offered very far below original price! Technical data according to manufacturer's specifications: Dimensions Width = 3278 mm Height = 3350 mm Depth = 3924 mm Weights Total weight = 6500 kg Ab. Gross batch mass = 500 kg Required floor load capacity = 1500 kg/m² Washing medium Operating medium = demineralized water Water connection = 4 bar, 3/4", cold Working temperature range = 10 -70°C, adjustable Flood pumps = 2 centrifugal pumps, flow rate per pump approx. 2 mn³/min, connected load per 4 kW Water Quantity Washing Process Chamber 1 = 3.9 m³ Water level measured from above Water level chamber 1 = max. 250mm, nominal 100-200 mm, min. 50 mm Heating Heating basin = 10 cartridge heaters, electric Total connected load = 85 kW Nominal voltage = 3 x 400 V AC~ PEN Control volta ...

Safety relay, safety control, emergency stop switchgear -Manufacturer: pilz -Type: P2HZ -Number: 1x relays available -Price: per piece -Dimensions: 90/80/H110 mm -Weight: 0.59 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 105 mm -Hole circle: Ø 135 mm -Weight: 18 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -exciting: centric -Interchangeable jaws: soft -Weight: 22 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 82 mm -Hole circle: Ø 105 mm -Weight: 14 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Weight: 6 kg

two-armed drill, rotary drill, magnetic drill, impact drill -Assembly: drill chuck -Nominal consumption: 500 W -Connection: 230 volts -Max. Drill diameter: 16 mm -Transport case -Dimensions: 500/200/H110 mm -Weight: 9 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK2 -Nominal consumption: 1150 W -Connection: 230 volts -Max. Drill diameter: 23 mm -Dimensions: 460/320/H100 mm -Weight: 6 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK1 -Nominal consumption: 400 W -Connection: 230 volts -Max. Drill diameter: 15 mm -Weight: 7 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Clamping angle: 200 x 200 mm -centric exciting -Chuck size: Ø 200 mm -Weight: 30 kg

Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

Two-arm drill, rotary drill, magnetic drill, impact drill, two-hand drill, core drill -Manufacturer: Fein, two-arm drill type DSk 658 -Intake: MK2 -Nominal consumption: 540 W -Speed: 420/200 rpm -Max. Drill: Ø 19mm -Dimensions: 330/415/H110 mm -Weight: 5.9kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Manufacturer: Starkstrom Gummesbach, two-hand control panel -Dimensions: 400/400 / H915 mm -Weight: 18 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Manufacturer: Unseld, two-hand control panel from Dorstener APE80-3050 press brake -Type: SEP03.0.L1/stand STP 01.4.1 -Accessories: including foot switch -Dimensions: Ø 500 x 1000 mm -Weight: 23 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -For machining: of aluminum and steel profiles -with 1 vertical and 1 horizontal milling motor -per motor: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -ransport dimensions 800/1200/H1630 mm -Weight: 270 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Two-hand control panel: from a press brake Atlantic HPT 13536 -Foot switch: Bernstein Classic -Dimensions: 920/1010/H1100 mm -Weight: 25 kg

two-armed drill, rotary drill, magnetic drill, impact drill, two-hand drill -Taper: MK with drill chuck -Nominal consumption: 250 W -Connection: 220 volts -Max. Drill: Ø 15 mm -Dimensions: 420/420/H120 mm -Weight: 7.1 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 455/400/H880 mm -Weight: 23 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 209 mm -Weight: 21 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -centrically exciting: -Passage: Ø 54 mm -Weight: 15 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 460/370/H920 mm -Weight: 18 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK3 -Nominal consumption: 1100 W -Connection: 380 volts -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm -Weight: 17 kg

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -centric: exciting -Chuck size: Ø 242 mm -Rezess: Ø 190 mm -Hole circle: Ø 215 mm -Weight: 26.4 kg

Packinov Rd2 two-layer yoghurt portioner/packer Automatic filling, sealing and dating of yoghurt pots (with two layers, jam if desired and yoghurt)

Zweiwalzenanleimmaschinen / Two Roller Gluing Machine Traenklein ZW 400 Year 2007 - Serial-No. 8383 Arbeitsbreite / Working width max. 400mm Kaltleim / Cold Glue Messing-Walzen / Brass-Rollers  Ø 80 mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 0,25KW -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test -Je nach Einsatzzweck koennen die Maschinen mit entsprechenden Sondereinrichtungen ergaenzt werden.

Trennsaege - Splitting Saw Metris MT 817 Year 2003 - Serial-No. 020520P Complete clean and Check -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Zweiwalzenanleimmaschinen / Two Roller Gluing Machine Prakma AM400 Arbeitsbreite / Working width max. 400mm Kaltleim / Cold Glue Messing-Walzen / Brass-Rollers  Ø 80 mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 0,25KW -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Condition: Very good condition

two-channel multifunction meter HENGSTLER Tico 732 0 732 002 ( 0732002 ) display: 6-digit operating voltage: 12 - 24 V DC, 100 mA ( 0.0.) 1 A ) output voltage: 12 - 24 V DC, 30 mA ( 0.03 A ) switching capacity: 30 V DC, 5A / 250 V AC, 5 A for panel mounting 45 x 45 mm New, with supports ! Dimensions ( counter, without frame ): 103 x 48 x 48 mm Dimensions ( packaging ): 155 x 120 x 80 mm

x-travel: 11000 mm y-travel: 2.500 mm workpiece height: mm table width: mm table length: mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2.500 mm workpiece height: 2.360 mm table width: 2.240 mm table length: 10.100 mm weight of the machine ca.: t dimensions of the machine ca.: 20,0 x 8,5 x 5,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BWU 1100 (2015) BWU 1100(2017) Max air pressure: 600 kPa Euroline – optimized for in- or off-line garbage bag production • Basic converting line for garbage bag production including a non driven C-folder • In- or Offline configuration – with or without surface unwind • Flexible unit, easy to operate and maintain • Servo driven • A combination of well proven FAS Converting units • Sealing from two sides with single sealing bars • Unique tensionless sealing system • Optional equipped with – PP-insert and TU220 tape unit Information taken from the documentation online (also attached to this listing) Master roll max diameter, mm [in]: 800 [31.5] Web width sealing max, mm [in]: 1060 [41.7] Bag length, min-max, mm [in]: 600-3000 [23.6-118] Machine speed, m/min [fpm]]: 20-100 [65.6-328] C-folding, mm [in]: 220-620 [8.7-24.4] Cycles/min, max : 160 W ...

Two-head cut-off saw EMMEGI year 2014 matr. C115528.

SECOND-HAND OSCILLATING TWO BENCHES MORTISER MOD. BALESTRINI MICRON - CE RULES - volt. 380/50 - sn AF657 Y11 - year 1998

SECOND-HAND TWO BENCHES OSCILLATING MORTISER PADE MOD. MO - CE RULES - kw 3 - volt 400/50 - year 2007