two component used for sale

Key data: 250 mm, 600 mm

24” wide x 10” diam. Two Roll Mill Emergency stop button at the front of the machine & a guard above the roller

2PCS x KOHLER ALTERNATOR 7M4054 NEMA CLASS H S/N 2286907 S/N 2287341 230/400 PHASE: 3 KW: 1416 KVA: 1770 AMP: 2555

Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min  ...

FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Two-hand control panel: from a press brake Atlantic HPT 13536 -Foot switch: Bernstein Classic -Dimensions: 920/1010/H1100 mm -Weight: 25 kg

two-armed drill, rotary drill, magnetic drill, impact drill, two-hand drill -Taper: MK with drill chuck -Nominal consumption: 250 W -Connection: 220 volts -Max. Drill: Ø 15 mm -Dimensions: 420/420/H120 mm -Weight: 7.1 kg

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Starkstrom Gummesbach, two-hand control panel -Dimensions: 400/400/H915 mm -Weight: 18 kg

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Elan, two-hand control panel with counter -Type: SEP 03.0.2.1.22 -Connector: 10-pin -Dimensions: 460/440/H140 mm -Weight: 6.4 kg

Two-hand machine control, safety two-hand control switch SQUARE D, HIGH-VOLTAGE CURRENT GUMMERSBACH ZHB accident protection system PREVENTA with emergency out ! used. tested ! Dimensions: 460 x 165 x 145 mm

Bundle offer Markforged 3D printer, consisting of 1 Onyx One 3D printer and 1 Mark Two 3D printer from Markforged in good condition considering its age, with the following accessories:, Equipment:, - 2 pieces of onyx material (2024), unopened, - 5 pcs. glass fiber endless material, (2017), unopened, - 2 dry boxes for material storage, Runtimes/number of print jobs:, - Onyx One: 4980h / 779 print jobs, - Mark Two: 6640h / 750 print jobs, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: CE,  ...

Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Manufacturer: Unseld, two-hand control panel from Dorstener APE80-3050 press brake -Type: SEP03.0.L1/stand STP 01.4.1 -Accessories: including foot switch -Dimensions: Ø 500 x 1000 mm -Weight: 23 kg

Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg

R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Bridge 84in x 26in/22in dia two roll mill, manual nip adjustment, Cored rolls with rotary joints fitted, Bronze bush type sleeve bearings, with Hagglunds hydraulic drives fitted to each roll, 160kW motor with pump to each roll for variable roll speed/friction. Drives fitted in 1988 (Marathon type). Complete with controls etc and in good working condition. Fabricated bedplate.

1 x Meccaniche Moderne 1500mm x 560mm dia two roll mill, Type: DUPLOCOM, Year 1984 but refurbished in 2001 to CE regulations. Peripherally drilled rolls, motorised nip adjustment (2.2kW to each roll), with 37kW, 1450rpm motor fitted to each roll, Friction ratio 1:1.24, Back roll speed 16.1rpm, front roll speed 12.9rpm, 3ph, 380V, 50Hz.

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

mounted on a stainless steel base frame due to the completely pneumatic control (without electrics) suitable for filling disinfectant, Piston stroke: 5 ltr. - that means two filling operations for one 10 litre canister capacity: approx. 150 - 10 ltr. canister / h

Two-hand control console + tripod, 3SU1853-3AA00-0AA1+ 3SU1950…, Siemens, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. Scope of delivery - Control panel 3SU1853-3AA00-0AA1 with 4 built-in switches or displays - Stand 3SU1950-0HN10-0AA0 - Incl. connection cable, 18x1mm² + industrial plug Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or  ...

Available in stock 1 x Used Rehobot Hydraulics 1000 bar Two stage Hand Pump Type PHS-374.36. The equipment is used but in good working conditions.

DALEX two-hand safety relay ZS 2-1 --- 24VDC for legacy Dalex PMS systems

Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 455/400/H880 mm -Weight: 23 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 460/370/H920 mm -Weight: 18 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -centric: exciting -Chuck size: Ø 242 mm -Rezess: Ø 190 mm -Hole circle: Ø 215 mm -Weight: 26.4 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 1150 W -Connection: 230 volts -Max. drill diameter: 23 mm -Dimensions: 460/320/H100 mm -Weight: 6 kg

two-arm drill, rotary drill, magnetic drill -Recording: MK1 -Nominal power input: 400 W -Connection: 230 volts -Max. drill bit diameter: 15 mm -Weight: 7 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Weight: 6 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -exciting: centric -Replaceable jaws: soft -Weight: 22 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK3 -Nominal consumption: 1100 W -Connection: 380 volts -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm -Weight: 17 kg

Zweiwalzen Anleimmaschine / Two-roller Gluing Machine Sumbel Herold Serial-No. 110 Walzenbreite 500mm / Roller width 500mm Arbeitsgeschwindigkeit / Working Speed 4 - 20m/min für Kaltleim / for cold glue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Technical details Manufacturer: SINAJET TECH Model: POPJET1811C TWO HEADS Type: Wide-format inkjet plotter / pattern plotter Serial number: L181CF05002 Power supply: AC 100–240 V Frequency: 50/60 Hz Maximum current: 2.33 A Configuration: - Dual print-head system - Wide-format printing platform - Roll-feed media handling system - Motorized paper transport - Take-up system - Integrated control panel - Floor-mounted industrial frame Printing width: Approx. 1800 mm Application: - Apparel pattern printing - Textile CAD output - Marker making - Upholstery pattern production - Leather cutting-room workflows - Full-scale template printing - CAD drawing and layout printing Construction: - Industrial steel frame - Continuous roll-fed operation - Computer-controlled printing system Condition: Used, untested Observed condition: - Frame appears structurally straight  ...

Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2

A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.

Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible.

Belt Conveyor/Conveyor Belt/Webbing Manufacturer: Deussen Fördertechnik Year of Make: 2008 Condition: used Type: DFZ000270810.075.0 Total length: approx. 3130 mm Total width including motor incl. feet: approx. 580 mm Total width without motor: approx. 80mm Two-belt conveyor Strap width: 20 mm Conveying height: 970 mm/height-adjustable Material: Steel/Aluminum Included: 2 feet Engine included: 0.18 KW Speed control included Internal Article Number: 2026032302 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intral ...

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Compressor system consisting of 2 compressors + 2 air dryers professionally installed in two adjacent containers. 2 x Manufacturer: Kaeser Type BSD 83 Year of construction 2016 Operating hours approx. 14,950 hours Rated power 45 kW Operating overpressure 12.0 bar 2x air dryer Manufacturer: Mark Type MDX 15000 Conatiner Overseas 2 pieces standing next to each other Total dimensions approx.: Width 5m, Height 2.8m, Length 6m Weight estimated (total weight) 10to