two component used for sale

No registration, pendulum axle front, 2x DW valve rear, adjustable tow bar, PTO 540/1000 RPM, 3-point lift, radio, Auction-ID: A1-43902-7

Fendt 305 35kmp roof hatch; adjustable tow bar; Auction-ID: A1-40142-165

Equipped with 5-Cil. \"Deutz\" air-cooled diesel engine; lower drawbar; 1 single-acting hydraulic valve; 1 double-acting hydraulic valve; depressurized return; Auction-ID: A1-40142-195

pressure: 200 t stroke: 500 mm table:: 1000 - 800 feed down: 150 -280 mm/sec feed under pressure: 10 - 26 mm/sec feed up: 180 - 300 mm/sec table height over floor: 750 mm total power requirement: 22 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-47842-569

We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

various components, pressure vessel (3 pcs.) a' 720 l

4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Incremental module FESTO TAB-2N-PK-3-01-B series: N401 10536 2 - 8 bar New ! Dimensions: 90 x 80 x 40 mm

Auction-ID: A1-47762-173

Pneumatic component FIBRO GSA 23679AA70 Stop. pneum. D50x10 New ! Dimensions: 160 x 80 x 60 mm

description: Here we offer a whole range of different Siemens Simatic S7 components. It is possible to buy the entire range, but it is also possible to buy parts from the pallets. After delivery / pickup, you have the right to return the purchase without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in serv ...

Spreader Component ENERPAC A-92 Tip Height: 35 mm Max Reach: 158 mm Threaded Attachment of RC Series 10 Ton DUO Cylinders (except RC-101) New ! Dimensions: 245 x 95 x 85 mm

Key data: 3200 kN, 359 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.

Ref. no.: 18092 Manufacturer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil fe ...

Introducing the TRUMPF TruFiber 1000, a high-quality single-mode fiber laser designed for precise welding, cutting, and metal processing applications. This 1,000 W laser system features an integrated cooling system, advanced safety control panel, and active power control for stable operation. Equipped with a TRUMPF PFO 33-2 TF HAL high-speed scanning head, it enables beam movement without physical motion, significantly reducing cycle times. The system includes CPX and intelligent optics, VisionLine Basic joint detection, and CalibrationLine Power auto beam power calibration. Also included is the Precitec LWM 4.0 weld monitoring system, complete with an IR sensor unit and modular laser safety cabin. Manufactured in July 2022, this equipment ensures high efficiency and reliability, ready for immediate deployment.

Introducing the DOS SCP210 Dispensing Controller, a high-precision electronic control unit by Loctite designed for dosing 1K adhesives. Featuring Profinet and Digital I/O interfaces, it supports up to 100 dosing programs, with control via foot pedal or PLC. The intuitive LCD menu optimizes user interaction, while the 230V AC power supply ensures efficient performance. Integrated with the A220 1C Material Feeding Unit, this system includes a pneumatic piston pump and patented vacuum follower plate, ensuring bubble-free dispensing from 20 L barrels at up to 10 bar. It accommodates media up to 1,000,000 mPa·s viscosity and operates with 6-bar compressed air. Complemented by the DOS GP-1C Dispensing Head, it guarantees precise, repeatable outputs. Currently available for order, this dispensing solution is ideal for industries demanding reliability and efficiency.

KRUPS Modular Conveyor System – Unmatched Efficiency for Industrial Automation The KRUPS Modular Conveyor System, part of the KRUPS LOGO!MAT L series, is expertly crafted for industrial automation, seamlessly connecting workstations with standardized pallets. This robust friction roller conveyor boasts a nominal width of 514 mm, specifically engineered for loads up to 250 kg per pallet, optimizing both precision and efficiency in handling heavy components. With integrated automation modules, this system offers lift units, rotation modules, diverters, and stop positions for advanced routing and orientation. Designed for straightforward control integration, it includes mounts for RFID and photoelectric sensors, ensuring precise tracking and coordination with standard PLC or fieldbus I/O. Made in Germany, the systems high-quality components and modular design offer superior longevity and ...

The LiquiPrep LP804 50/20 by Material Preparation and Feeding Unit is a state-of-the-art automated system designed for the continuous, bubble-free supply of high-viscosity media, including gap fillers, thermally conductive pastes, and adhesives. It boasts a tank capacity of 53.5/24.6 L (gross) with an agitator speed of 39 rpm and a maximum feed pressure of 12 bar. This machine includes a diaphragm pump with a volume of 100 ml per stroke and a vacuum pump rate of 267 l/min. The package comes with the DOS P300-2C01 dispensing head and the flexible DOS-GP-1C01 Logic control unit. The unit is suitable for electronic control systems and offers modular, low-maintenance integration for seamless automation. Available for immediate purchase in [Location TBA].

Some Siemens and Vacon automation components are available. 1) Frequency inverter Vacon NXS00225. 2) Power module Siemens Simodrive 611 50A. 3) 2x power module Siemens Simodrive 611 25A. 4) 5x infeed module Siemens Simodrive 611 10kW/25kW. 5) 3x infeed module Siemens Simodrive 611 5kW/10kW. Documentation available. On-site inspection is possible. All articles are new.

Key data: 2000 kN, 352 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

An automatic Gise inspection machine for nails is available. Inspection method: image processing system, camera system: Keyence CV-X300F, throughput: approx. 60nails/min, detection accuracy: 98%, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1100mm, weight: approx. 150kg, control system: Siemens S7-1500. Including segmented conveyor. Documentation available. An on-site inspection is possible.

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

Key data: 1300 kN, 127 g/PS, 35 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ARBURG Type: 420C1300-350-60 Year of Make: 2003 Clamping force: 130 tons Spar spacing 420 x 420 mm Screws DN 1: 35 mm Moulded part weight in hp: 127 g Screw DN 2: 25 mm Moulded part weight in hp: 45 g Control: Selogica Equipment: . Core train -Robots

Lengths up to 4500 mm Auction-ID: A1-44305-63

Auction-ID: A1-47477-46

Exhibition stand (part of the elements) 1. 3 m double-sided straight textile wall 2. Solaris roll-up banners 100 cm x 2 pcs. 3. EASY leaflet stand 4. TV stand Auction-ID: A7-40834-10

- Replacement engines from an edging machine of the EGURKO ORTZA brand. - Includes: - Power advance motor 4 KW-1425 rpm. - Motor and geared motor for drag chain. - 2 x motors in the cleaning disc group. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-72

- Included: control, electrical panel and various electrical components. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-81

Machine Type: Hot Runner Components and Heated Nozzles Set Manufacturer: HASCO and various manufacturers Component Type: Hot runner nozzles, heated nozzles, temperature sensors, heating elements and connection cables Quantity: 33 pieces Material: Steel and stainless steel components Electrical Equipment: Integrated heating cartridges, thermocouples and connection cables Application: Injection moulding and hot runner systems for plastic processing Condition: Used Included Accessories: Braided cables, blue connection cables, sensor leads, heating elements and various mounting components Visible Markings: HASCO, various identification numbers and handwritten references Remarks: Mixed lot consisting of 33 hot runner technology components removed from industrial moulding systems. Includes heated nozzles, hot runner inserts, sensors and wiring harnesses. Functional test no ...

Laser marking machine BLMF-ED, 20W - LMM0003 - Q.ty 5 Laser marking machine BLMF-EE, 50W - LMM0008 - Q.ty 1 Laser marking machine BLMF-EB, 20W - LMM0021 - Q.ty 3 Laser combination machine, 1500W - LMM0023 - Q.ty 1 Sealing gaskets for collimation lens LMM0017 - Q.ty 17 Spare parts for laser marking machines: buttons, selectors and power supplies - Q.ty 22 Cutting machine head for laser cutting machine LMM0010 - Q.ty 1 Chiller for laser cutting machine LMM0010 - Q.ty 1 Transformer for laser cutting machine LMM0010 - Q.ty 1 Auction-ID: A7-47751-2

Type: EDM / precision clamping and fixture components set Manufacturer: EROWA / System 3R Configuration: Mixed precision fixture plates and clamping modules marked 7.1 – 7.5 Application: Workholding and positioning for EDM and precision machining operations Construction: Hardened and precision ground steel assemblies Included components: Large fixture base, rack-type clamping element, modular clamp blocks and positioning rail System compatibility: EROWA tooling interface and System 3R fixture components Condition: Used, with visible wear marks, scratches and workshop traces Remarks: Suitable for integration into EDM fixture systems and custom machining setups Auction-ID: A7-45993-171

Ventilated Suit Component Pack Auction-ID: A1-47210-3612

Machine Type: Hot Runner Components and Heated Nozzles Set Manufacturer: HASCO and various manufacturers Component Type: Hot runner nozzles, valve gate nozzles, heated nozzles, sensors and connection cables Quantity: 41 pieces Material: Steel and stainless steel components Electrical Equipment: Integrated heating elements, thermocouples, sensor cables and connection leads Application: Injection moulding hot runner systems and valve gate technology Condition: Used Included Accessories: Braided protection cables, blue connection cables, thermocouple leads and mounting components Visible Markings: HASCO and various handwritten identification numbers Remarks: Mixed lot of 41 hot runner and valve gate components from injection moulding equipment. Includes heated nozzles, valve gate assemblies, sensors and associated wiring. Untested. Signs of wear, oxidation, storage mark ...

Machine Type: Workshop Tool Cabinet with Precision Components and Tooling Design: Steel multi-drawer storage cabinet Number of Drawers: approx. 10 drawers Contents: Mixed lot of precision machined parts, tooling accessories and workshop consumables Included Items: Ground shafts, guide pins, bushings, sleeves, springs, spacers, bearings, fasteners, abrasive materials and miscellaneous machine components Material: Steel cabinet with metal drawer runners Colour: Grey Condition: Used Remarks: Sold complete with all visible contents. Includes assorted precision machine elements and workshop stock. Contents not individually inventoried. Signs of workshop use, oxidation, dirt and storage wear. Functional condition of individual components not tested. Auction-ID: A7-45993-198

Machine Type: Industrial Automation Modules / PLC Components Lot Manufacturer: Sigmatek Series: DIAS Included Components: Various PLC modules, communication modules, terminal modules and I/O modules Visible Models: DCP843, DT0163, DEZ161, DP5001, DKL013, DKL025, DKL002, DKL003 Communication Interfaces: RS232, CAN interfaces and terminal connections (according to visible modules) Application: Industrial automation and machine control systems Configuration: Mixed lot consisting of controllers, digital I/O modules, terminal modules and interface boards Quantity: Approx. 15–20 modules and assemblies Condition: Used Scope of Delivery: Only components visible in the photographs Remarks: Sold as one lot. Functional condition not tested. Various modules supplied partly in original packaging. Auction-ID: A7-45993-195

Various switching valves and much more, see pictures Auction-ID: A1-47842-636

Technical data Mixed Lot of Pneumatic and Drive Components Consisting of various pneumatic valves, geared motors, electronic components, rollers and machine assemblies. Some of the brands Festo, Bosch Rexroth and Harmonic Drive AG are recognizable. Harmonic Drive gearbox type HFUC-25-2UH-SP available. Bosch electric motors with IP55 protection and outputs up to 0.44 kW. Configuration Scope of delivery according to the picture: Several Festo pneumatic valves and valve blocks, geared motors, castors/swivel castors, electronic modules, drive components and various accessories in plastic boxes on wooden pallets. Used condition, unchecked. Auction-ID: A7-47277-3048

Technical data Mixed Lot of Pneumatic and Drive Components Consisting of various pneumatic valves, geared motors, electronic components, rollers and machine assemblies. Some of the brands Festo, Bosch Rexroth and Harmonic Drive AG are recognizable. Harmonic Drive gearbox type HFUC-25-2UH-SP available. Bosch electric motors with IP55 protection and outputs up to 0.44 kW. Configuration Scope of delivery according to the picture: Several Festo pneumatic valves and valve blocks, geared motors, castors/swivel castors, electronic modules, drive components and various accessories in plastic boxes on wooden pallets. Used condition, unchecked.