two component used for sale

Sold without content Auction-ID: A1-47151-79

SECOND-HAND OSCILLATING TWO BENCHES MORTISER MOD. BALESTRINI MICRON - CE RULES - volt. 380/50 - sn AF657 Y11 - year 1998

Sr. No.: 111000253 // p/n: 1364000

Condition: Very good condition

Auction-ID: A1-40140-180

Auction-ID: A1-47151-19

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Trennsäge - Splitting Saw Metris MT 817 Year 2003 - Serial-No. 020520P Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zweiwalzen Anleimmaschine / Two-roller Gluing Machine Sumbel Herold Serial-No. 110 Walzenbreite 500mm / Roller width 500mm Arbeitsgeschwindigkeit / Working Speed 4 - 20m/min für Kaltleim / for cold glue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Two-hand machine control, safety two-hand control switch SQUARE D, HIGH-VOLTAGE CURRENT GUMMERSBACH ZHB accident protection system PREVENTA with emergency out ! used. tested ! Dimensions: 460 x 165 x 145 mm

pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm | label width: 10-150mm | bottle diameter: customized | label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ? 1mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V/380V, 50Hz/60Hz, 750W | machine dimensions: L2400mm?W1500mm?H1400mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are po ...

Sr. No.: 802245

Bundle offer Markforged 3D printer, consisting of 1 Onyx One 3D printer and 1 Mark Two 3D printer from Markforged in good condition considering its age, with the following accessories:, Equipment:, - 2 pieces of onyx material (2024), unopened, - 5 pcs. glass fiber endless material, (2017), unopened, - 2 dry boxes for material storage, Runtimes/number of print jobs:, - Onyx One: 4980h / 779 print jobs, - Mark Two: 6640h / 750 print jobs, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification:  ...

Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2

Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm

Two-ply gluing machine for making large-format boxes

Belt Conveyor/Conveyor Belt/Webbing Manufacturer: Deussen Fördertechnik Year of Make: 2008 Condition: used Type: DFZ000270810.075.0 Total length: approx. 3130 mm Total width including motor incl. feet: approx. 580 mm Total width without motor: approx. 80mm Two-belt conveyor Strap width: 20 mm Conveying height: 970 mm/height-adjustable Material: Steel/Aluminum Included: 2 feet Engine included: 0.18 KW Speed control included Internal Article Number: 2026032302 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intral ...

Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Manufacturer: Unseld, two-hand control panel from Dorstener APE80-3050 press brake -Type: SEP03.0.L1/stand STP 01.4.1 -Accessories: including foot switch -Dimensions: Ø 500 x 1000 mm -Weight: 23 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg

At present, for office use (cadastral category A/10), the entrance is \"open space\", ideal for welcoming customers or for organizing different workstations in a flexible way. The main work area is completed at the rear by a second reserved compartment — perfect as a private office or archive — and a dedicated toilet. The property is in good general condition, proti with electrical system and heating by convectors. The transformation into a two-room residential apartment can be achieved thanks to the distribution of the spaces. CADASTRAL DATA: - Province of Pesaro/Urbino - Municipality of Macerata Feltria - Land Registry of Buildings, sheet 41 parcel 342, sub. 2, cat. A/10, class U, 3-room consistency, income € 402,84 URBAN PLANNING AND CADASTRAL COMPLIANCE: No urban planning checks were carried out, as the unit is located within a larger building built in the pre-1967 era a ...

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Auction-ID: A1-46666-569

Information and sales counter in two parts with passage approx. 4x3m on the left side and 3x1.5m on the right side, wooden body white, worktop Sonoma oak, base with various shelves and lockable drawer block with 11 drawers, rubbing rail and foot protection, contents of small quantities of office equipment, without sales goods

Starting with a cable, checking electronics Auction-ID: A1-40139-247

Consists of: Hanomag R40 1954, engine D57, 4 cylinder, 40hp, restoration object, registration present, in original condition, 2 spare front tyres with rims, no frost damage, engine runs, ran a few years ago, always stood still afterwards. Auction-ID: A1-40139-76

Fendt 305 35kmp roof hatch; adjustable tow bar; Auction-ID: A1-40139-165

International 845XL; power steering; top pull bar; lower drawbar; kipperknobel; top link; Hydro brake valve! Auction-ID: A1-40139-235

Technical details Manufacturer: Walter Model: TD 630 KBA Type: Two-faced multitasker / multilama saw machine Year: 2022 Motor power: - 1 × 22 kW - 1 × 30 kW Main engines: - 35 kW - 23.8 kW Max log diameter: 450 mm Saw blade set: 8 pcs Infeed table length: 6 m Dimensions: - Width: 1300 mm - Length: 3400 mm - Height: 1900 mm Application: Multi-blade wood cutting and log processing operations Condition: Used Auction-ID: A7-40554-6

This concerns an unused product, including grease, consisting of article number: 108001GP, Engine 2-stroke oil, 1l, semi-synthetic, by gopart, quantity: 247, article number: 81011400WEKR, Chisel paste 400 g, quantity: 12 Auction-ID: A1-45624-28

Equipped with: PTO, lighting, rear front linkage, sirocco cover, windshield, hour reading not controllable Auction-ID: A1-40140-188

Equipped with: towbar coupling, jockey wheel, handbrake, lights, spare tire Auction-ID: A1-42019-55

Year of manufacture estimated 1992 equipped with Lombardini 2 cylinder diesel engine with approximately 18 hp equipped with. New linkage recently replaced flexible coupling weight approximately 505 kilos Auction-ID: A1-40140-184

Equipped with 4-Cil. Diesel engine; 2 double-acting hydraulic valves; power steering; PTO: 540 rpm; Auction-ID: A1-40140-193

Two black shelves with integrated tray supports As good as new/new black painted Auction-ID: A1-47205-2558

We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

various components, pressure vessel (3 pcs.) a' 720 l

4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S

- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Incremental module FESTO TAB-2N-PK-3-01-B series: N401 10536 2 - 8 bar New ! Dimensions: 90 x 80 x 40 mm