129,270 used machines on RESALE, but how to find them? Machine Search
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Trennsäge - Splitting Saw Metris MT 817 Year 2003 - Serial-No. 020520P Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Zweiwalzen Anleimmaschine / Two-roller Gluing Machine Sumbel Herold Serial-No. 110 Walzenbreite 500mm / Roller width 500mm Arbeitsgeschwindigkeit / Working Speed 4 - 20m/min für Kaltleim / for cold glue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Two-hand machine control, safety two-hand control switch SQUARE D, HIGH-VOLTAGE CURRENT GUMMERSBACH ZHB accident protection system PREVENTA with emergency out ! used. tested ! Dimensions: 460 x 165 x 145 mm
pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm | label width: 10-150mm | bottle diameter: customized | label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ? 1mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V/380V, 50Hz/60Hz, 750W | machine dimensions: L2400mm?W1500mm?H1400mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are po ...
Bundle offer Markforged 3D printer, consisting of 1 Onyx One 3D printer and 1 Mark Two 3D printer from Markforged in good condition considering its age, with the following accessories:, Equipment:, - 2 pieces of onyx material (2024), unopened, - 5 pcs. glass fiber endless material, (2017), unopened, - 2 dry boxes for material storage, Runtimes/number of print jobs:, - Onyx One: 4980h / 779 print jobs, - Mark Two: 6640h / 750 print jobs, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: ...
Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2
Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm
Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.
A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.
Two-ply gluing machine for making large-format boxes
Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.
Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work
An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.
Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible.
GT-5374 Two Stainless Steel Bathtubs - Stainless steel - For 2.85 meter pipe each tub
GT-5392 Two Bathtubs for Cooling and Vacuum - Brand: VIRGINIO MAI - Model: VCT 63/125 - With 3m vacuum aluminum tub and 2.5m cooling stainless steel tub
Belt Conveyor/Conveyor Belt/Webbing Manufacturer: Deussen Fördertechnik Year of Make: 2008 Condition: used Type: DFZ000270810.075.0 Total length: approx. 3130 mm Total width including motor incl. feet: approx. 580 mm Total width without motor: approx. 80mm Two-belt conveyor Strap width: 20 mm Conveying height: 970 mm/height-adjustable Material: Steel/Aluminum Included: 2 feet Engine included: 0.18 KW Speed control included Internal Article Number: 2026032302 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intral ...
At present, for office use (cadastral category A/10), the entrance is \"open space\", ideal for welcoming customers or for organizing different workstations in a flexible way. The main work area is completed at the rear by a second reserved compartment — perfect as a private office or archive — and a dedicated toilet. The property is in good general condition, proti with electrical system and heating by convectors. The transformation into a two-room residential apartment can be achieved thanks to the distribution of the spaces. CADASTRAL DATA: - Province of Pesaro/Urbino - Municipality of Macerata Feltria - Land Registry of Buildings, sheet 41 parcel 342, sub. 2, cat. A/10, class U, 3-room consistency, income € 402,84 URBAN PLANNING AND CADASTRAL COMPLIANCE: No urban planning checks were carried out, as the unit is located within a larger building built in the pre-1967 era a ...
Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Manufacturer: Unseld, two-hand control panel from Dorstener APE80-3050 press brake -Type: SEP03.0.L1/stand STP 01.4.1 -Accessories: including foot switch -Dimensions: Ø 500 x 1000 mm -Weight: 23 kg
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg
Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg
4 cylinder, engine runs but not with starter motor Auction-ID: A3-43507-17014
Case 745 xl ; adjustable tow bar! ; gearbox good no scratching; 540/1000 PTO; Auction-ID: A1-40133-96
International 845XL; power steering; top pull bar; lower drawbar; kipperknobel; top link; Hydro brake valve! Auction-ID: A1-40133-231
International 743xl start running drive brakes lift/PTO working Auction-ID: A1-40133-229
Deutz Dx 3.60 starcab ; farmer; Auction-ID: A1-40133-230
Lot: Set of two LOHMEYER NDC642A & NDC602A CNC drills – sold only as a set Type: Continuous flow automatic multi-spindle drills Function: Vertical and horizontal panel drilling with automatic feeding and unloading Construction: High-strength steel frame, cast components for precision and durability Drill heads: 12 multi-spindle rows with servo motors and digital positioning Order: PLC/PC with touch screen and machine learning for new drilling patterns Total power: approx. 95 kW (38 kW + 57 kW) Dimensions (mm): approx. 11,000 × 3,650 × 2,800 Weight (kg): approx. 14,000 Power supply: 400 V – 3 phases – 50 Hz Year: 2022 Manufacturer: LOHMEYER Notes: Machines sold together and inseparable – same principles as KUPER machines. Equipped with chip conveyors, pneumatic clamping, servo motor control and user-friendly PLC interfaces. Serial number included in ...
Equipped with: PTO, lighting, rear front linkage, sirocco cover, windshield, hour reading not controllable Auction-ID: A1-40134-99
Featured; PTO; Hef; (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Please note; Roof leaks Auction-ID: A1-40134-374
Mercedes-Benz LK 1320 Two-way tipper with Hiab 071 – H-registration – Year of construction 1993 • Manufacturer: Mercedes-Benz • Model: LK 1320 • Year of construction: 1993 • Engine: OM 366 LA, 6-cylinder turbodiesel • Power: 210 hp (154 kW) • Displacement: 5,958 cc • Mileage: 544,400 km • Transmission: Manual • Axle configuration: 4x2 • Construction: Two-way tipper • Loading crane: Hiab 071 • Fuel: Diesel • H approval available Equipment & work carried out: • New all 6 tires • Frame and subframe derusted, treated and painted • Skip completely reworked (sheet metal re-welded) • Girder of the body renewed • Well primed and painted in original colour • Cavities preserved • Crane primed and painted • Approx. 57 hydraulic hoses renewed • Hydraulic oil new • Hydraulic cylinder of the body resealed ...
Equipped with: drawbar, linkage, PTO does not work! , 2x double-acting hydraulic valves, top link, power connection Auction-ID: A1-40134-168
Equipped with: sprayer, front weight, PTO, linkage Auction-ID: A1-40134-167
Year of manufacture estimated 1992 equipped with Lombardini 2 cylinder diesel engine with approximately 18 hp equipped with. New linkage recently replaced flexible coupling weight approximately 505 kilos Auction-ID: A1-40134-364
Plasma generator with trolley 2 swivel castors Support surface: 130 x 116 cm Hall Auction-ID: A1-45762-25
maximum number of results exceeded
please refine your search
60.000 € 
