134,602 used machines on RESALE, but how to find them? Machine Search
turning diameter over bed: 330 mm turning dia. in gap: 400 mm turning length: 600 mm centre distance: 750 mm spindle turning speed range: 20 - 1000 U/min spindle bore: 25 mm 3-jaw chuck: Röhm, Ø 200 mm dimensions of the machine ca.: 2000 x 800 x 1500 mm weight of the machine ca.: 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: PM2079, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SMH60 D8
Stock number: PM2078, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: MH60 D8/B
Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG
Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082
Screw Diameter: 35 mm // Output Capacity: 25 kg/h
Screw Diameter: 160 mm // Output Capacity: 1400 kg/h
Screw Diameter: 100 mm // Output Capacity: 600 kg/h
Screw Diameter: 65 mm // Output Capacity: 170 kg/h
Merk: Leistritz AG Model: Micro 27/40 D Type schroef: Dubbele schroef Bouwjaar: 1993 Schroef Ø: 27 mm L/D-verhouding: 40 Werkuren: 2.466 Bws Ud Dvyju Aqdkocjw
• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour
turning diameter over bed: 360 mm turning diameter over slide rest: 180 mm turning length: 900 mm turning speed range: 25 - 1600 U/min total power requirement: ca. 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brand: Atlas Compo Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198kg. Assets: 5.5 kW Sound level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0- 10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm State machine: Very good Electrical connection: 3 phase Missing parts: No Photos/film available: Photos available 10.2.192
Brand: Boge Type: C3LR Kind: Screw compressor, air-cooled Max. final pressure: 10 bar Chassis number: 5063340 Year of construction: 2013 Capacity: 0.24 m3/min. = 8.3 CFM Engine speed: 1,500/ min. Drive power: 2.2 kW (3 hp) Pressure vessel: 90 liter Voltage: 400V / 50Hz (3-phase) L x W x H: 1185 x 550 x 1010 Noise level: 61 dB (A) Weight: Approx. 130 kg Residual oil content: < 3 mg/m³ Connection: G ½” (ball valve) Cooling air volume: 600 m³/h Ambient temperature range: +5 to +40 °C Photos/film available: Photos available 10.2.195
turning diameter over bed: 800 mm turning diameter over slide rest: 540 mm turning length: 4000 mm centre height: 400 mm centre distance: 4000 mm spindle turning speed range: 9 - 1140 U/min weight of the machine ca.: 8,0 t - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 72 mm
We can offer a W&P extruder. 75/36, year 2004, stopped, working condition.
Key data: 58 mm
We can offer a Toshiba extruder. 58/40, year 2010, stopped, working condition.
: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 460 mm turning length: 1250 mm centre height: 230 mm centre distance: 1250 mm spindle turning speed range: 35 - 1800 U/min weight of the machine ca.: 2,7 t Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New) ...
turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 2100 mm centre height: 250 mm : mm spindle bore: 60 mm spindle turning speed range: 11 - 2000 U/min total power requirement: 7,0 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 4,3 x 1,2 x 1,3 mm Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 370 mm turning diameter over slide rest: 200 mm turning length: 1000 mm centre height: 185 mm spindle bore: 56 mm tailstock quill taper MT: 4 turning speeds: 50 - 2000 U/min power capacity: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 460 mm turning diameter over slide rest: 280 mm turning length: 1000 mm centre height: 230 mm : 720 mm spindle bore: 53 mm spindle turning speed range: 28 - 1250 U/min total power requirement: 4,0 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,4 x 1,4 x 1,75 mm Lathes with: - Digital display - Quick-release tool post - 3-jaw chucks (200 mm and 160 mm) - Chip tray - Centering center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg
feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ALMIG Combi 15-10 rotary screw air compressor YOM 2012. Never used. Motor speed 3000 rpm Motor power 15 kW Volume flow m3/min- 1.84 Volume m3/hour- 110 Max. pressure 10 Bar. Air Receiver Capacity 500L
turning diameter over bed: 400 - 900 mm turning diameter over slide rest: ? mm turning length: 1000 - 1500 mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m Free at short notice due to current company resolution In use until the end Untested, wear and tear due to age and use Machine package 5 x lathe 2 x CAZENEUVE HB 500 1 x WEISSER Junior 1 x SCHAERER UD 630 x 1500 1 x ERNAULT SOMUA HN 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray
Dimensions (L/W/H): 1950x690x1700 mm Weight: 431 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1950x690x1700 mm Weight: 426 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A screw compressor is offered. Maximum pressure 10bar, volume flow approx. 2020l/min (2.02m3/min) with separate compressed air tank, galvanized. Viewing possible by appointment.
greates pass round over bed: 540 mm swing diameter over face slide: 370 mm centre distance: 3000 mm centre height: 270 mm turning dia. in gap: 815 mm bed width: 344 mm spindle bore: 88 mm spindle diameter in front bearing: 133 mm spindle taper: 11 D1 Camlock turning speed range: 18-1400 U/min turning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mm face feeds: 0,03-0,5 mm metric threading: 0,4-14 mm inch threading: 2-72 G/1 thread - module: 0,3-3,5 mm thread - DP: 8-60 Pitch tailstock quill diameter: 75 mm quill stroke: 230 mm taper of tail spindle: MK 5 slide valve travel: 280 mm upper head travel: 150 mm Overall size: ca. 4700 x 1100 x 1400 mm weight: ca. 3200 kg power capacity: 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rea ...
Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement.
Vacuum extrusion press 'UNIVERSA' PZG 40-40a with 400 mm Ø and 18.5 kW drive (expandable up to 55 kW). Maximum pressing pressure: 30 bar. Extruder incl. PZSVG 35a pre-press with 15 kW drive. Includes base frame with motor clamping device. In regularly serviced condition; last revision in 2022. Previous use: Production of ceramic roof tiles. Available for an extra charge: vacuum generator and various mouthpieces.
We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.
We can offer Krauss maffei extruder,moder ZE90A, manufactured in 2013, main motor power 884kw, large output, installed and used, auxiliary equipments available, serious buyer contact us.
L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle ...
Fully automatic capping machine PMFS100. High-precision mechanical design for seamless bottle positioning. Sliding cylinder modules for cap tightening. Intelligent control system with touchscreen. Electrically and pneumatically driven. Surfaces made of stainless steel or food-grade plastics (GMP-compliant). Suitable for mass production. Production capacity: 120 bottles/min, compressed air: 0.6kg/cm², air consumption: 20m³/h. Inspection possible by prior arrangement.
Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg
Key data: 230 mm, 460 mm, 25 U/min
Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...
Technical data: - Operating hours 4248 h - Load hours 1978 h - Operating pressure 10 bar - Delivery rate 3.34 m³/min - Drive 400 V / 22 kW - Motor speed 3000 rpm - Space requirement approx. W 1300 x H 1250 x D 800 mm - Weight approx. 490 kg
Technical data: - Operating hours 20256 h - Operating pressure 13 bar - Delivery rate 4.09 m³/min - Drive 400 V / 26 kW - Motor speed 3000 rpm - Space requirement approx. W 900 x H 1750 x D 900 mm - Weight approx. 490 kg
Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray
1.0 PCS screw compressor system consisting of the The following components: 1.0 pcs Screw Compressor, Manufacturer: Almig, Type: Belt Drive 15 , Year of manufacture: 2013, Operating pressure: 10 bar, power 15 KW 1.0 pcs. Compressed air dryer Manufacturer: Prematic 1.0 pcs pressure vessel 1.0 Sr. Oil Separator
Manufacturer: KAESER Model: BSD 72 SFC Year of Manufacture: 2012 Machine type: Screw Compressor Rated Power: 37.0 kW Motor Speed: 2960 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 degrees C / 45 degrees C Until February 2020, this compressor was our main supplier for the system, i.e., between 500 and 700 hours per month. Since February 2020, this compressor has only been used as a backup and during maintenance of the second compressor. The compressor currently has 51,532 operating hours.
Key data: 2 , 10
New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...
Key data: 5 , 10
Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 " ...
Key data: 7 , 10 , 1
Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...
Extrudeuse CM EVOLUTION PLAST type CM-EVO 230 Année. : 2019 Puissance : 50 KW Tension : 400 VOLTS Poids : 4000 KG
maximum number of results exceeded
please refine your search
