twin screw extruder used for sale

Atlas Copco used machine power:45 KW volume flow: 7,26m3/min pressure:7,8 bar year:2008

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

Key data: 75 , 10 , 11

BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...

Kaeser used machine power:37KW volume flow: 7 m3/min. pressure: 8,5 bar

Boge used machine power:55KW wolume flow:7,3m3/min. pressure:10 bar

Kaeser user machine power200KW volume flow:36,52m3/min. pressure:7,5 bar

Kaeser used machine power:90 KW volume flow:16m3/min pressure:8,5 bar

New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand

Excenter screw pump Make: Netzsch Type: NE 20A Speed-controlled gearbox (manufacturer: Stöber) Speed: 64-320 rpm Power: 0.55 kW at 1380 rpm Dimensions LWH: 1200 x 300 x 350 mm Weight: approx. 80 kg

Stainless steel material feed station, material acceptance station bulk hopper acceptance bunker used Material collection station for plastics, grain, waste and other free-flowing products for further conveyment to the cup plant. Bulk opening approx. 4980 x 1600 mm Filling volume max approx. 7 m3 Screw length approx. 4000 mm Screw diameter: approx. 750 mm Slope: approx. 500 mm Drive: 5.5 kW at least the parts in contact with the material are made of stainless steel The complex is dismantled and can be visited in Riesa. Thanks to our own special machine construction, changes are also possible according to your wishes.

Pipe screw conveyor screw used inclined conveyors Changes can be made by our own special machine construction according to your wishes. Pipe diameter approx. 380 mm Pipe length approx. 6000 mm Inlet/outlet-diameter approx. 350 mm Screw and tube made of stainless steel Gearmotor Sew 1.1kW 10 rpm 380 V Total dimensions approx. 8000 x 600 x 1300 mm

Pipe screw conveyor screw inclined conveyor without motor used Our own special machine construction can also be made. Pipe diameter approx. 260 mm Pipe length approx. 4780 mm Screw coil length approx. 4200 mm Inlet/outlet-diameter approx. 250 mm Screw tube top open with lid Price without engine We adapt the engine to their use at an additional cost. Ideal snail for wood chips or similar wood chips. Total approx. 5050 x 1000 x 600 mm 2 pieces available

Compair used machine power:37 KW volume flow: 6,17 m3/min pressure::10 bar

Atlas Copco used machine power : 55KW volume flow: 10,3 m3/min pressure: 13 bar

Precision ball screw drive, KGT 40mm, Gewindelg 1735mm, Steinmeyer, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw / ball roller spindle with nut - Nominal thread diameter 40mm, pitch 10mm, - total length: 1920mm, 17kg, - ball screw length: 1735mm shaft end 1: 115mm lg - D22 x 40mm lg, thread M30 x 1,5 x 21mm lg, D30 x 54mm lg shaft end 2: 70mm lg - thread M25 x 1,5 x 20mm lg - D25 x 50mm lg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device  ...

TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 8.49 Working pressure max bar: 10 Total power installed kW: 55 Rotation speed max rpm: 2182 Weight Kg: 1531

MIXER, SCREW FEEDER, MILL, #3747

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. GA 55 AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9,1 bar. - 131psi VOLTAGE 440V 60Hz P motor 55kW 75hp YOB 2010 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO MAS GA 37 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. MAS GA 37. AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9.1 bar. - 131psi VOLTAGE 440V 60Hz P motor 37kW 50hp 2010 YOB MADE IN. BELGIUM IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO GA 55 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

1 used and professionally dismantled cement conveyor screw type ELBA BZL 80/100 , built 1995, engine and gearbox New 2020, AA approx. 8.50 m, 1 spare piece 3.0 m, disassembled and cleaned Errors and intermediate sale reserved, sale from stock

Width of jaws: 160 mm Price on request.

No. 4620: 1 gebr. Guide and pull spindle lathe Fabr. BOLEY, Type 5 LZ, Arb.-Ber.: SpH 130 x 500 mm, Other: Spindle speeds: in 22 stages 28 - 2550 min-1 Space requirement: 1.5 x 0.9 x 1.25 m Weight ca 800 kg

see pdf attached

Complete precision ball screw drive with bearings, stroke 308mm, 25x5/25, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Complete precision ball screw with pillow block and floating bearing, thread diameter 25mm x 5mm ball screw Plummer block Rexroth: R159161720 Plummer block Rexroth: R159111720 Ball screw nut with part holder: R150321085 Total 496 x 110 x 72mm Maximum stroke: 308mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 3 months after purchase you can return the goods and we wi ...

15,000 Fl/h running direction r-l.

Pressure: 8 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 722 x 1555 x 1080 Weight: 424 kg Compressed air connection: 1

Power: 109 kW Capacity:11,76 m3 / min Pressure: 20 bar Year of manufacture: 1995

Pressure: 8 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 1072 x 1555 x 1080 Weight: 524 kg Compressed air connection: 1

Pressure: 10 bar Motor: 11 kW Free air delivery: 1,76 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 505 kg Compressed air connection: 1

Pressure: 10 bar Motor: 22 kW Free air delivery: 3,21 m³/min Measurement (WxHxD): 1072 x 1735 x 1056 Weight: 561 kg Compressed air connection: 1

Package 21 pcs,. quantity, model and price - photo attached

Package 5 pcs - great price to be negotiated

Pressure: 13 bar Motor: 18,5 kW Free air delivery: 2,32 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1

Pressure: 10 bar Motor: 30 kW Voltage: 400 Volt / 50 Hz Free air delivery: 4,1 m³/min Measurement (WxHxD): 1350 x 1585 x 900 Weight: 590 kg Compressed air connection: 1 1/4

Pressure: 13 bar Motor: 11 kW Free air delivery: 1,31 m³/min Measurement (WxHxD): 2036 x 1915 x 915 Weight: 740 kg Compressed air connection: 1

Pressure: 10 bar Motor: 37 kW Free air delivery: 5,78 m³/min Measurement (WxHxD): 1620 x 1450 x 960 Weight: 760 kg Compressed air connection: G 1 1/4

Description Universal lathe suitable for tooling, fixture construction, training and mould making Peak height: 180mm Speed:25-2000 rpm Technical data Built in 2015 Speed 25-2000 rpm Peak height 180mm (360mm) Peak width 1000mm Spindle passage 38mm Reitstock MK 3 Total power requirement 4 KW Weight 880kg Connection 50 Hz 3x 380V

Pressure: 7,5 bar Motor: 18,5 kW Free air delivery: 3 m³/min Measurement (WxHxD): 1250 x 1335 x 850 Weight: 400 kg Compressed air connection: 1

Pressure: 13 bar Motor: 22 kW Free air delivery: 2,74 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 635 kg Compressed air connection: 1

Pressure: 13 bar Motor: 22 kW Free air delivery: 2,58 m³/min Measurement (WxHxD): 1620 x 1450 x 960 Weight: 620 kg Compressed air connection: 1 1/4

Pressure: 10 bar Motor: 22 kW Free air delivery: 3,1 m³/min Measurement (WxHxD): 1250 x 1335 x 850 Weight: 440 kg Compressed air connection: 1

Pressure: 10 bar Motor: 11 kW Free air delivery: 1,5 m³/min Measurement (WxHxD): 1113 x 854 x 626 Weight: 220 kg Compressed air connection: 3/4

Pressure: 10 bar Motor: 90 kW Free air delivery: 13,01 m³/min Measurement (WxHxD): 2880 x 1959 x 1295 Weight: 3336 kg Compressed air connection: DN 65

Pressure: 10 bar Motor: 15 kW Free air delivery: 2,22 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 380 kg Compressed air connection: 1

Kaeser CSDX 165 SFC T used machine power: 90 kW volume flow: 3,84 - 15,84 m3/min pressure: 8,5 bar 2012 year

Pressure: 10 bar Motor: 18,5 kW Free air delivery: 2,71 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1

Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,06 m³/min Measurement (WxHxD): 480 x 1234 x 987 Weight: 235 kg Compressed air connection: 1/2

Pressure: 8 bar Motor: 37 kW Free air delivery: 6,32 m³/min Measurement (WxHxD): 1615 x 1448 x 965 Weight: 843 kg Compressed air connection: 1 1/4

Pressure: 8 bar Motor: 37 kW Free air delivery: 6,32 m³/min Measurement (WxHxD): 1615 x 1448 x 965 Weight: 843 kg Compressed air connection: 1 1/4

Boge used machine power:30 KW wolume flow:4,75m3/min. pressure:10 bar