twin screw extruder used for sale

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm Isbmrc Iporp D Uxenjtf width: 1600mm height: 2000mm weight: 4400 kg

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

various screws up to diameter 150 mm available

Key data: 130

Extruder 1 spindle : 130 mm Ø, 35 L / D, for grancear plastics, brand: Plasco, with forced feeding. Degasser, with vacuum pump: 15 hp. Filter changer: 260 mm, overhead cut to water. Vibrating screen and motor: 238 KW with variable speed drive and electrical panel. GT-2982

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Key data: 120

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.

Key data: 50

Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.

Approx. 600 pcs., in stock on pallet Auction-ID: A1-45790-525

Approx. 800 pcs., in stock on pallet Auction-ID: A1-45790-526

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.

Approx. 600 pcs., in stock on pallet Auction-ID: A1-45790-524

nominal force:100 t stroke:320 mm no. of strokes:35 /min distance between columns:360 / 250 mm Distance table/ram, max. stroke up, adjustment up:500 mm table surface area:320 x 450 mm table height over floor:660 mm ram surface:250 x 280 mm spindle diameter:125 mm power capacity:3,0 kW weight:4,5 t Dimensions (WxDxH):2,0 x 1,6 x 3,1 m

Key data: 120

Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.

Key data: 60

Extruder 1 spindle: 60 mm Ø 32 L/D, Amut brand, variable speed motor Elektra Faurndau: 7 to 24 KW, with electrical panel and wire head for pellets: 23 holes and electrical panel.

nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m

Key data: 90

Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.

Key data: 120

Extruder 1 spindle: 120 mm Ø, 35L/D, brand: Union, with degasser, hydraulic filter changer: 150. Year: 1987.

DuoPower Plug 12x60 with lag bolt 8x80

Screw eye with wood thread, thickness 8 mm, total length 130 mm, galvanized

Key data: 65

Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.

Key data: 60

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Safinio, motor: 20 hp, variable speed drive, brand: Omron, model: F7, alternating current: 30 kw and electrical panel.

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

in very good working condition

Single screw Extruder Theysohn 63mm

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

Specifications H&G HG/SV 11, Presto SP screw compactor 15 pieces available, made between 2004-2014 Weight: 1 800 kg Year of construction: 2004-2014 Tank volume: 25 m3 Power supply: 400V/50Hz 11 kW New containers available for the presented screw press

Screw compressor C9 Flow rate 1.1 m3/min 10 bar 7.5KW Hours 9000 Schematic E-Parts Compressor is unchecked.

Screw compressor Boge 400 V 11 KW 1.45 m3/min 10 bar Accessories : belts, filters, small parts The compressor goes to fault after switching on:

Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition

Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.

Dosing screw INOX Length: 200 cm Diameter: 150 cm Motor: 1.1 kW Revolutions: 25

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Recycling machine trade AGICOM- Pedergnana OG: Screw conveyor demonstration device - for the transport of granules. Construction: Metal construction with drive and transmission gear. The discharge height can be adjusted by adjusting the legs. electric motor 1.1 kW; Length 2.5 m

Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer

Ref. -No.: 10258 Manufacturer: SCHAERER Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Lining: Forkardt F315 Brand Machine length: 3.800 mm Machine width: 1.300 mm Machine Height: 1.500 mm Weight Of The Machine Ca.: 4 t Tool holder type: Multifix Typ C Turning Length: 1.800 mm Turning Diameter Over Bed: 520 mm Turning Diameter Over Slide Rest: 320 mm Spindle Bore: 62 mm Bezel diameter (inside): 270 mm Hole in the jaw chuck: 84 x 120 mm

Ref. -No.: 10257 Manufacturer: HEIDENREICH & HARBECK Year of construction: 1981 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPM Machine length: 2.900 mm Machine width: 1.200 mm Machine Height: 1.800 mm Weight Of The Machine Ca.: 3,5 t Tool holder type: Multifix Typ B Turning Length: 1.000 mm Turning Diameter Over Bed: 480 mm Turning Diameter Over Slide Rest: 295 mm Bezel diameter (inside): 1 x 145, 1 x 255 mm

centre height: ca. 150 mm centre distance: 1300 mm : vorhanden diameter: ca 250 mm digital readout: 1x make: Heidenhain u. Werkzeug-Sc serial number: 63-06 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204

5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204

Key data: 40 mm, 40 , 600 U/min

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

Key data: 65

Extruder 1 Screw 65 Ø diam, 30 L/D Brand: Flag engine: 30 KW (40 hp). With electrical panel. Reference: GT-4706

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

Key data: 60

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.