twin extruders used for sale

Used 903Kw POWER-CIAT LXH.M 3750 HPS aircooled chiller with integrated hydraulic module. Complete with 3x Bitzer CSH8561-125Y-40P hermetic screw compressor with economizers. Direct expansion shell and tube evaporator with a water capacity of 219 ltr. Aircooled condenser with 12 fans diameter 800 mm and airflow of 264.000 m3/h. Electric control with microprocessor Xtra connect. Capacity control from 17 to 100%. Hydraulic module with buffer tank 950 ltr, expansion vessel 80 ltr and twin centrifugal pump. Specifications: Our inventory stock No. 12831 Brand CIAT Type LXH.M 3750 HPS Product type Air Cooled Chiller Capacity kW 903 Capacity Tons 256,8 Refrigerant Freon Refrigerant Type R 407C Liquid buffer tank Pump Hydronic Module Weight in kg. 8.576 kg Sizes 9400x2500x2200 mm (LxWxH) Compressor(s) type & model 3x Bitzer CSH8561-125Y-40P Display Ciat xtraconnect cont ...

Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h

Mantle Packaging Stainless manual tray sealer, twin tray operation, temperature and timer controls, tray dimensions 270mm x 280mm, 1Ph

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Falcon fryer Model: G1860 Serial: F211990 Stainless, single tank with twin basket, 24L oil capacity, 32.2Kw, natural gas

Manesty Drycota 900 23 Station Double Headed Tablet Press with Type D Tooling • This Double Headed Tablet Press is Mounted on a Common Chassis Plate and Driven via Line Shaft by a Common Drive • Twin Single Compression • Turrets Are Each Fitted With 23 Type D Stations • Upper Keyed Tooling • Removed Side Attached Operation Control Panel N°. of Stations: 23 Voltage: 400 VOLTS Frequency: 50 HERTZ Phase: 3

Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

CNC lathe BOLEY type BE 42 - Bi-spindle / twin-turret TECHNICAL SPECIFICATIONS: CN Type: MITSUBISHI Meldas 635LCC X1 axis stroke: 170 [mm] Z1 axis stroke: 200 [mm] X2 axis stroke: 110 [mm] Z2 axis stroke: 395 [mm] X3 axis stroke: 110 [mm] Z3 axis stroke: 170 [mm] Y-axis stroke: -/+ 40 [mm] Tool holder type: VDI 20 Spindle for clamping clamps: Size 48 DIN 6343 Spindle passage diameter: 42 [mm] Mini speed. Pin: 80 [rpm] Maximum speed. Pin: 8000 [rpm] C-axis indexing accuracy: 0.001 [°] Pin power: 7.5 [kW] Counter-spindle passage diameter: 42 [mm] Mini speed. Counter spindle: 60 [rpm] Maximum speed. Counter spindle: 6000 [rpm] C-axis indexing accuracy counter-spindle: 0.001 [°] Counter spindle power: 2.2 [kW] Maximum diameter. Machinable: 140 [mm] Number of positions - Upper turret: 12 Number of motorized positions - Upper turret: 12 Maximum speed. rotating to ...

RAFAMET KM 4 mechanical folding machine manufactured in Poland in 1990 is designed for producing bent sections from metal sheets with a maximum thickness of 4 mm, made by consecutive folding along the length of the workpiece strip. The highly reliable machine also allows for shaping sheet metal boxes, winding sheet metal edges and making wrapped and crimped connections after installation of special equipment. The folding machine is equipped with a control panel, back stop, workspace illumination and pedal for foot control. The machine has the same design and appearance as its twin folding machine OZAMECH KM 4. The total weight of the machine is 3750 kg. Technical parameters of the RAFAMET KM 4 folding machine - working width of the bending slats: 2000 mm - maximum workpiece length: 1500 mm - maximum workpiece thickness: 4 mm - smallest length of crimped sheet metal strip betwee ...

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

Still EXD SF 20 Pallet Stacker E-Ant + Charger + Driver's platform lateral support Fork length 120 cm YOC 2011 From the manufacturer the following information: The EXD-S is a heavy-duty double-deck stacker that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using double-deck loading and unloading. With the EXD-S, two pallets can be transported at the same time - This allows trucks to be loaded and unloaded in a time-saving and effective manner. Frame. - The shape of the frame has been specially developed for use in trucks and in confined spaces. In particular, the edge shapes support driving over ramps and entering trucks. - The tips and undersides are designed as sliding runners and prevent them from getting caught at transitions. The angled corners of the platform make it possible to drive backwards out of the truc ...

MO.DI.TEC_GTwin Plus ABS SN: 95000004589 Machine in great condition, most of time not in use. The MO-DI-TEC Goliath range of low-speed granulators are specially adapted for beside press recycling of sprues, parts. They produces large quantities of regrind high quality without affecting the materials’ molecular structure. Granulate may be fed directly back into processes, saving time and material. The Goliath TWIN Plus assures an optimal regrind of a much more important output thanks to a wider cutting chamber and 2 gearmotors (2x1,8 kW or 2x2,2 kW optional). Models feature a unique tooth design facilitates both trapezoidal and helical cutting, and a resistant steel coating protects the teeth against wear from abrasive materials. Ergonomic grinder Reversible combs Both helical and trapezoidal granulometry Soundproof steel hopper Easy cleaning and maintenance IMD dete ...

Bookpress / twin plates / Hydraulic Splek Model IIB Year 1975 Size 280 x 440 mm Stack height 600 mm Pressure 3 tons Available Direct

Serial No. FH. DMA0-00272, The Twinstacker TSH Vertical Stack Delivery Is The Economical Solution To Broadly Cover The Medium To High Capacity Range. The Delivery Transports The Individually Pressed Sheets Through The Belt Section Without Marking. Subsequently, The Stacks Are Formed From The Top In Catch Baskets And Laid Out Alternately – In Two Stacking Levels Arranged One Above The Other. This Enables Effective Non-Stop Operation. The Simple Handling With Good Accessibility Also Facilitates The Processing Of Multiple-Ups. The Height-Adjustable Feed Table Ensures That The TSH Twinstacker Can Be Positioned Easily And Flexibly At The Various Preliminary Stations. Whether Laying Out Isolated Sheets Or Even In A Shingle Stream – The Twinstacker TSH Convinces In Every Respect With Its Performance. User-Friendly Stack Delivery, Mark-Free Laying Out Up To Two Uses, With User-Friendly Ergon ...

Year built 2004 OTHER TECHNICAL DATA POWER OF ROTATING TOOLS 4 Kw MACHINE EQUIPMENT Tool holder set supplied DIMENSIONS AND WEIGHT Length 3000 mm Width 2500 mm Height 2010 mm Weight 6700 Kg

New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...

Manufacturer: Gildemeister Type: Twin 65 with counter spindle & automation. Year of construction: 2010 Control: Siemens 840D powerline Circulation diameter above bed: 250 mm Flat travel carriage 1: 300 mm Longitudinal travel carriage 1: 650 mm Perpendicular Y-axis: ± 40 Flat travel slide 2: 180mm Longitudinal carriage 2: 650mm Rod passage max: ø 65 Drive power:40/100% 25/37 KW Speed range from – to: 20-5000 rpm Weight approx.: 10.000 kg Equipment: 2x star turret: 12x Driven tools: 12x VDI 40 2 turrets (all stations driven) Tool carrier: 12x VDI 40 2 turrets (all stations driven) Tailstock: Yes + counter spindle MK 4 Quill mounting: Yes Chip Conveyor: Yes Accessories: -Y-axis. -Coolant tank: 980l / 80 bar. -Coolant device for lower turret 8/20/80 bar. -Belt filter system -Mechanical oil mist separators 600m³ with contamination indi ...

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

The Swiftcheck is designed to feed and count any size, shape or quantity of tablets without change parts, and is the ideal unit to serve as a line monitoring machine to check the count accuracy of filled containers from the packing line. The system is simple to operate and easy to clean. Technical data: Length: mm 575 Width: mm 200 Height: mm 600 Designed for ease of operation and simple setting, the Swiftcheck incorporates a similar microprocessor package to that used on the high speed counting machines, achieving the same high level of accuracy and reliability. The basic unit comprises a stainless steel cabinet with integral micro processor control system, 5 litre product hopper and vibrator feed arrangement with variable vibration control, quick release twin-track feed tray and contact parts, stainless steel outlet funnel and clear plastic dust cover.

saw blade diameter: 450 x 32 x 4 mm turning speeds: 3000 U/min : 210 x 170 mm : 130 x 130 mm Capacity 45° rectangular: 145 x 170 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 2,2 / 3,0 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 850 x 970 x 1370 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...

GILDEMEISTER MF TWIN 65 Y CNC-Drehmaschine die 1999 in Deutschland gebaut wurde, ermöglicht vollautomatische Produktionsprozesse bei hoher Genauigkeit und niedrigen Betriebskosten. Die Maschine, die sich durch ihre umfangreichen Bearbeitungsmöglichkeiten auszeichnet, ist dank ihrer robusten Bauweise, der umfangreichen Ausstattung und dem Fokus auf hohe Produktivität ideal für jeden Produktionsbetrieb, selbst bei anspruchsvollsten Herausforderungen. Das CNC-Drehzentrum MF TWIN 65Y führt Präzisionsbearbeitungen von Metallwerkstücken mit einem maximalen Durchmesser von 200 mm durch, wobei zuverlässige Werkzeuge in zwei Werkzeugköpfen mit 12 Positionen (oben und unten) eingesetzt werden. Das Drehen der Werkstücke findet in einem großen Arbeitsraum statt, der mit einem um 45° geneigten, starren Bett und einem integrierten Späneförderer ausgestattet ist, der den Arbeitsraum sa ...

Twin pallet vertical machining center CHIRON FZ15KW Highspeed Spindle 12000 RPM Rapids asse Z 60m/min 2005 Pallet 2 x 660 x 400 mm X 550 Y 400 Z 360 coolant through spindle 48 tools HSK63 swarf conveyor CNC Siemens 840D This Machine can be inspected and tested under power in our warehouse in Gussago BS Italy

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3400 U/min : 160 x 130 mm Capacity 45° rectangular: 125 x 125 mm voltage: 380 V operating pressure: 6 - 8 bar total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 710 x 810 x 1400 mm Standard Accessories Mitre left & right up to 45°, 30°, 22.5°, 15°, 0° location points Intermediate angles via manual lock Twin horizontal pneumatic clamps Pressure regulator for clamps On/Off switch for clamps Machine stand Air gun included Precision angle cutting Ideal for commercial aluminium and general profile cutting Standard conveyor (2 mt. right) Durable cast hub Optional Equipment Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) 1500 mm long, double-sized caliper bracket Pneumatic and automatic working system  ...

Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the  ...

Extrusion line consisting of two extruders: - Bandera 60 extruder - year 1960 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - variable V gearbox - Union extruder 60 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - mechanical gearbox - 400 mm coextrusion table - Towing, cutter, oven, Pagani exit tunnel - Tecnofar calender width 450 mm

Screw spindle pump Manufacturer: Wangen GmbH Type: Train 104.53-1 N°: P951403 Built: 2018 new condition various spare parts with original operating instructions (incl. CD-Rom) and documentation Engine power: 5.5 kW Weight of engine: 119 kg LWH: 1300 x 450 x 320 mm

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3580 U/min : 150 x 100 mm : 120 x 120 mm Capacity 45° rectangular: 130 x 80 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 132 kg dimensions of the machine ca.: 720 x 760 x 1330 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting  ...

cutting diameter: 360 mm saw band length: 5000 mm cutting width: 610 mm speed: 20 -100 m/min main drive: 3 kW hydraulic pump: 0,55 kW coolant pump: 0,12 kW dimensions of saw-band: 5000 x 34 x 1,1 mm : 360 mm : 360 x 360 mm Capacity 90° rectangular: 610 x 360 mm : 360 x 360 mm : 360 x 360 mm Capacity 45° rectangular: 490 x 360 mm : 360 mm : 360 mm : 610 x 360 mm capacity 60 degrees: round: 3,67 mm capacity 60 degrees: square: 360 x 360 mm capacity 60 degrees: flat: 360 x 360 mm band speed: stufenlos 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,47 t dimensions of the machine ca.: 2,75 x 1,21 x 1,87 m This twin-pillar horizontal bandsaws have been designed to provide a low cost, compact and rigid machine.The bow is constructed in heavy gauge steel. It is mounted at two chromed and grinded pillars offering a strong rigid sawframe. This design provides a high ...

saw blade diameter: 500 x 32 x 4 mm turning speeds: 3580 U/min : 230 x 180 mm : 135 x 135 mm Capacity 45° rectangular: 165 x 180 mm : 115 x115 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...

PVC production line Screw diameter 55 mm. Main motor power 37 Capacity(kg/h) 100-150 Kg/h Effective length of screw(mm) 1050 Equipment Content : No. Description Quantity 1 twin-screw extruder 1set 2 vacuum calibration tank 1set 3 haul-off&cutter 1set 4 stacker 1set

turning diameter: 200 mm turning length: 635 mm control: SIEMENS 840D Powerline greates pass round over bed: 250 mm spindle turning speed range: 20-7000 U/min turret head: 2x 12 weight of the machine ca.: 10 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 550 x 32 x 4 mm turning speeds: 3580 U/min : 260 x 200 mm : 155 x 155 mm Capacity 45° rectangular: 180 x 200 mm : 130 x 130 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3 / 4 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting al ...

GeneralTurning Center; Control: Control M730UM CharacteristicsMax machining diameter366 mmDimensions (L x W x H)3,84 x 2,36 x 1,80 mDrive power tool spindle7,5/5,3/3,7 kWDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z250/1143 mmRotary tool spindle speed6000 rpmNumber of tool stations12 Speed max.4500 rpmBar diameter max.65 mmSpindle bore73 mmSwing- Ø, max.760 mmMax. Turning Length1085 mmWeight approx.6500 KgSLIMlineSLIMline DMG MORI operating system equipped with MAPPS. The large 15-inch display can reduce the number of switching of the screen as it provides the four-way split screen and allows user to see more information at once. It is also possible to customi(Spindle 1) 22/15/11 kW,4,500 min-1 (Standard)(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15 HP), 4,500 min-1 The ALX2000 adopts a highly reliable ...

Manufacturer: Blow Moulding s.r.l. Machine type: BM 2000 D (CoEx) Stations / Stations: Double / Double Year of construction / built: 1999 Location: Europe/ Europe Control type / control system: Original control (Microset) Number of extruders: 4 Extruder sizes: 60, 35, 60, 35 - (24D) Hose head / parison head: NEWMA 6-layer CoEx single-head (New) / NEWMA 6-layer CoEx single-head (New) Mould platen sizes (mm): 290 x 380 Flaschenvolumen Max. / bottle volume max.: 3,2 Lit. Clamping force: 55 kN Accessories: - Viewing strip extruder / Viewstripe extruder - 2x rotating wide neck edge/ 2x rotary trimming devices - 5 suction conveyors for material/ 5 suction conveyors for materials - 1 dryer on extruder no. 4 – EVOH 1 dryer on extruder no. 4 – EVOH - 1 dispenser on the extruder No. 1 – main batch 1 dispenser on extruder no. 1 – master batch - 1 dispenser on ex ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

GeneralCNC Turning Centre with C axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle15/22/22 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.-5000 rpmBar diameter max.65 mmSwing- Ø, max.755 mmMax. Turning Length510 mmWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (spindle 1) 22/ 15 kW, 5,000 min-1The NLX 2000 adopts a highly reliable main spindle de ...

Used but fully functional. Cooling unit for water cooling also available. Manufacturer: Dalex Type: SL 16-2G Year of construction: not apparent Length of electrode arms: 600mm Foot switch Equipment: • Electrode arms L = 600mm • Substructure / elevation 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

Used but fully functional. Suitable spot welding machine available. Manufacturer: Dalex Type: ES 1.1 Year of construction: 1989 Type: Water cooling 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

CNC Lathe with twin Turrret and spindle With C and Y axis Swing diameter 400 mm Max turning diameter 200 mm Tool holder VDI 30 Controller Siemens 840D With LNS barfeeder