twin column used for sale

Bed Size:Left to Right 393mm 15.5 in Front to Back 393mm 15.5 in Daylight Between Tables 559mm 22 in Daylight Between Heated Platens 353mm 13.9 in Heating Electrical Induction Heated Platen Sizes(Up To) 355mm x 355mm 14″x14″ Max Working Platen Temperature 220°C Main Ram Stroke(Up To) 355mm 14 in Hydraulic Circuit Pressure 70 Bars 1000 PSI Main Ram Pressing Force 41 T 40 Ton Main Ram pull back 2.2 T 2.2 Ton Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

used compact bread roll line König Eco Twin 9000 K6-SCHN6/B Classic Rex immediately available in stock for sale. -6-row roll line -König Eco Twin 9000 K6-SCHN/B Classic -with King Classic Rex head machine - Max. hourly output: -Year of construction 2011

Bread roll line König ECO Twin 800 Classic Rex Model No.: 800-DB800 K6-Schn6/B-DA Head machine dough part and knitting machine Classic King Rex 6-row with spreader belt, proofer Settling device on 60x80 Stainless steel version Connection 400V 16-A CEE plug Dimensions:approx. 3480 x 1400 x 2640 mm, WxDxH Used machine Visit us !

Handle applicator TWIN-PACK Single Lane Power 60 cpm Control Siemens S7

HAMMELMANN HDP 124 Twin Unit Integration of 2 x Hammelmann HDP 124 high-pressure pumps Technical data: Manufacturer: Hammelmann GmbH, Germany Type: Twin Unit with 2 x HDP 124 Year of Make: 2013 Machine numbers: B3.01124.xxxx and B3.01124.xxxx Working pressure: 2 x 2,500 bar Max. flow rate: 2 x 24 l/min Piston Diameter: P17.5 Engines: 2 x DEUTZ TCD 2012 L06 2V, Stage 3 Engine power: 2 x 129 kW at 2,150 rpm Diesel consumption: approx. 45–70 l/h Tank capacity: approx. 900 litres Noise emission: LWA = 110 dB Water connection: Express coupling Minimum water pressure: approx. 3 bar Required water volume: approx. 2 m³/h Dimensions: approx. 11.05 m x 2.60 m x 4.50 m Weight: approx. 11,750 kg Built on: DAF 75.250 4x2 truck, 250 hp, 19 t box body Aquajet 12 – n°01 – year 2013 2450bar – 24l/min Engine Deutz 5 919h Pump 3 723h Aquajet 12 – n°02 – yea ...

CNC Laser Cutting Machine - Fiber Laser 9 kW Amada LCG 3015 AJ M2 + ASLUL Twin Year of manufacture 2018 AMNC 3i CNC Control Laser source AJ 9000 (9 kW) Travels: X 3,070 mm Y 1,550 mm Z 100 mm Axis speeds X,Y,Z 120/80 m/min. Cutting feeds 0 - 60 m/min. Z-Axis Sensor HS 2013 Loading/unloading storage towers ASLUL TWIN 16-fold nozzle changer Equipped with: Clean cut (Hochwertiger Schnitt) NC Focus Control Lens 190 mm Oil Shot Barcode Reader WACS Automatic scrap conveyor 16-fold nozzle changer Storage and transport system ASLUL TWIN (loading/unloading) Very good condition Offer number V-7157

Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...

5-axis CNC working center BACCI mod. TWIN - Strokes: X = 3400 Y = 1500 Z = 1100 B = endless C = 400° - Type 4 head 7.5 kw - 0-24.000 rpm - N. 2 tgv working tables - OSAI control - Enclosed cabin on 4 sides + roof - No. 2 Becker vacuum pumps 100 m³/h - Serial no. 132 - Year 2001 (CE rules)

Used USED HANDLER TWIN PACK: Year: 2001 Condition: As Is Year: 2001 Speed: 3.600 pz/h Type: double lane Safety protections Code: MN 3 More details: https://bottlingscout.com

Manufacturer: EMAG Year of manufacture: 2005 Model: VSC 200 TWIN OP 50 Find more here - / Contact us at -

Manufacturer: EMAG Year of manufacture: 2005 Model: VSC 200 TWIN OP 40 Find more here - / Contact us at -

Manufacturer: EMAG Year of manufacture: 2005 Model: VSC 200 TWIN OP 20 Find more here - / Contact us at -

Manufacturer: EMAG Year of manufacture: 2005 Model: VSC 200 TWIN OP 10 Find more here - / Contact us at -

Technical Specifications & Performance Data The Twin Pack MDEL-S is a reliable automatic handle applicator designed for post-filling operations in beverage production and industrial packaging. This second hand unit is suitable for integration within a used bottling line to enhance pack presentation and consumer convenience for PET containers. Manufacturer: Twin Pack Model: MDEL-S Year: 2008 Category: Handle Applicator Application: Automatic carry-handle application for PET containers No. of tracks: 1 (single-lane configuration) Container types: PET primary; can be synchronized with lines handling glass or aluminum containers downstream of filling Bottle formats: Compatible with a wide range of PET bottle heights and diameters (format parts may be required) Production speed/capacity: Throughput dependent on container size, handle type, and line speed; designed to match medium-to-high spee ...

Overview This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Manufacturer: Twin Pack Model: MDEL Machine type: Handle applicator (carry handle machine) Year of manufacture: 2002 Application: Application of carry handles for beverage multipacks Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Equipment Automatic carry handle application system Suitable for various multipack configurations Integration capability into existing bottling and  ...

This 6-axis BACCI TWIN CNC Wood Machining Centre was manufactured in 2001. It features an impressive X-axis travel of 3400 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1000 mm. The machine is equipped with 4 milling heads that can reach speeds of up to 24,000 rpm and includes 2 tables and 2 vacuum units. If you are looking to get high-quality wood machining capabilities, consider the BACCI TWIN machine we have for sale. Contact us for further details.

CNC lathe Gildemeister Twin 65Y RG2 Year of Make: 2003 Control Siemens 840D CNC Twin Spindle Turning Center Design Main/Sub-Spindle Yes Turret 2 × 12 stations Tool holder VDI 30 Powered Tools Yes Y-axis Yes (upper turret) C-axis main and counter spindle Workspace Feature Value Max. turning diameter 250 mm Max. turning length 650 mm Max. turning Ø over bed approx. 340 mm Bar passage 65 mm Main spindle Feature Value Speed 20–5,000 min⁻¹ Power 35 kW Gjbr U Uozl Dy Nek Rhsud Torque 370 Nm C-axis 0.001° Sub-spindle Feature Value Speed 20–5,000 min⁻¹ Power 35 kW Torque up to 370 Nm Bar passage 65 mm C-axis 0.001° Travels Axis Value X1 300 mm Z1 650 mm Y 80 mm (±40 mm) X2 180 mm Z2 650 mm Tool turret Number of stations 12 + 12 Tool holder VDI 30 Driven tools 4,000 min⁻¹ Power tool drive 11 kW Torque tool drive 28 Nm Chip conveyor Hig ...

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z-axis travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 51170h/53006h, Feed/Machining time 1/2: 33418h/30961h, Automatic operation hours 1/2: 14858h/14709h. Both machines are equipped with chip conveyors, 2x tool turrets, 2x loading stations, a workpiece palletizing system, robot automation and coolant system. Documentation available. An on-site inspection is possible.

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible.

max. wheel diameter:260 mm gear width:320 mm max. module:5 weight of the machine ca.:21 t dimensions of the machine ca.:8,71 x 5,97 x 3,49 m no. of teeth:1...999 max. helix angle:+45/-45 ° pitch min.:0,1 mm pitch max.:1000 mm X-axis:345 mm y-axis:250 mm Z-axis:320 mm b-axis:360 ° c-axis:360 ° Coolant is not available. It was central and there is only a booster pump without filtering. For loading system there is a 2-axes robot with workpiece conveyor.

turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m max. swing diameter:250 mm Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

turning diameter:145 mm turning length:210 mm total power requirement:40 kW swing diameter:145 mm Spindle bore sp. 1:56 mm Spindle bore sp. 2:56 mm swing diameter over face slide:145 mm greates pass round over bed:145 mm RPM Main Spindle:7.000 1/min number of workpiece supports:12 Shank diameter:25 mm C-axis RPM:2.000 1/min Chuck diameter spindle 1:140 mm Chuck diameter Spindle 2:140 mm Number of tools:12 fach St. Tool bore:VDI 25 Shank diameter:25 mm weight of the machine ca.:5.300 kg dimensions of the machine ca.:5.000 x 4.100 x 2.050 mm Slide path flat: X1, X2, X3: 220mm, 120mm ( 145mm ) Longitudinal slide travel: Z1, Z2, Z3: 320mm, 345mm, 380mm Vertical slide travel Y1: +/- 30mm Longitudinal spindle travel Z3: 380mm Clamping tube inner draw tube 46mm diameter Speed range main drive 1+2 up to 7,000 rpm Speed of driven tools up to 6,000 rpm Main and counter spindle collet chuck 1 axial ...

cutting diameter: 320 mm cutting width: 320 x 320 mm saw band length: 5.090x34x1,1 mm cutting speed: 20 - 110 m/min feed length: 750 einfach mm min. dia.: 10,0 mm min. cut-off length: 6,0 mm total power requirement: 7,0 kW weight of the machine ca.: 2.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum passage diameter: 310 mm Maximum turning diameter: 190 mm Standard turning diameter: 170 mm Maximum turning length: 235 mm Bar passage: 65 mm Spindle speed: 50 to 5,000 rpm Spindle power: 22 kW / 18.5 kW Spindle nose: JIS A2-6 Spindle Bore: 73 mm Axis C: Indexation 0.001° Turrets: 2 independent turrets Tool capacity: 32 positions (16 per turret) Motorized tools: 16 positions per turret Motorized Tool Speed: 6,000 RPM Power with motorized tools: 5.5 / 2.2 kW Indexing time: 0.2 s X-axis: 140 mm Y-axis: ± 50 mm Z-axis: 700 / 690 mm B-axis: 775 mm Fast Advances: 18 m/min CNC Control: MSX 501 MAPPS II (Fanuc 30i) Weight: 6,600 kg Dimensions: 3,700 x 2,100 x 2,000 mm Equipment: Bar feeder included Auction-ID: A1-48609-15

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Sugden Engineering Twin propeller Mixing Vessel. 200 L Stainless vessel, 2 top mounted paddle stirrers, Vessel 45 degree sloped base to outlet.

Used EXTRUDER twin screw (TWIN SCREW EXTRUDER) for the production of cereal flakes: Producer: PAVAN Model: TT92 Year: 2002 Dimensions: 6580 x 4150 x 3000 Weight: 2400 kg Productivity: 500 kg / h Power: Description: A twin-screw extrusion device as a result of a continuous and automatic process of a great variety of flour and cereal starches / tubers, both mixed and pure. The materials from the dispensing unit are pre-mixed using a suitable device equipped with counter-rotating blades (double shaft mixer), and then enter the mixing tank for kneading and homogenization. From the mixing tank, through a suitable screw device (forced supply), the mixture is pressed into a group of cooking cylinders in which the cylinders are heated to the desired stage, according to a predefined and automatically controlled temperature profile. compatibility of extruder screws, which are repla ...

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

new ! all stainless steel 2 speeds (30 and 60 rpm) 2 mixing directions 2,4 kW safety lid CE-approved overall dimensions (l x w x h) : 1.720 x 840 x 1.390 mm (open lid: H: 1.890 mm)

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 12 kw pneumatic lid inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 2.210 x 1.130 x 1.770 mm (open lid : ± 2.630 mm) infeed height : ± 1.600 mm outfeed height : ± 720 + 20 mm + Loader for eurobins

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions inspection gantry safety lid CE-approved variable speed plc control overall dimensions (l x w x h) : 1.970 x 1.000 x 1.600 mm (open lid: H: 2.250 mm) Quick & Clean system Seals of mix axles easy and quickly disassembly and monolithic seals + Loader for eurobins

Hydraulic BMF twin press 80 Atue maximum Good condition

Sugden Stainless twin lane sheeter, stainless mesh belt, belt width 400mm, width of stainless rollers 400mm, mobile frame, 3Ph

all stainless steel twin shaft paddle mixer suitable for vacuum suitable for cooling capacity ± 1.500 L loading height ± 2.000 mm discharging height ± 750 mm double lid at the top 2 discharge guards dimensions : ± 2.300 x 2.000 x 2.400 mm

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion

Twins Trailers T750 professional snack trailer, built in 2025, in excellent overall condition, fully equipped and ready to be used for a mobile catering activity (snack, chip shop, Asian cuisine, burgers, etc.). Galvanized chassis Drawbar with jockey wheel Ball hitch Four stabilizing crutches Lockable rear door Large lift-up side canopy with gas struts 230 V external electrical connection (CEE plug) Stainless steel technical box at the front Roof ventilation and extraction The trailer is equipped with a complete set of professional equipment including: Professional stainless steel hood with removable grease filters Electric extractor with exhaust via roof chimney 2-burner gas hob GGM Gastro Professional Gas Fryer Professional plancha / hob (visible in the cooking set) Large refrigerated display case with rear sliding doors Several levels of stainless steel presentation  ...

We can offer TMT FDY spinning lines, manufactured by TMT, Japan in 2012, Melt spinning lines,from melt PET inlet to winder.each inlet spuuly 3 beams, each beam has 2 positions, spinneret diameter 100mm, pitch 1400mm, redial blowing quenching, each has 4 hot gidets, 230X450mm, TMT ATi-615/32 winder, twins winder,chuck 1500mm,

Equipped with fold-down withers H30cm Without running wheel Auction-ID: A1-46485-19

Without tires and rims Without running wheel Auction-ID: A1-46485-18

Equipped with fold-down withers H30cm Without running wheel Auction-ID: A1-46485-15

Auction-ID: A1-48457-417

various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available

continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed

Forberg 1000LH Twin shaft paddle mixer Serial: 1720 Stainless twin shaft paddle mixer, 1000Kgs, bottom discharge doors, inspection hatch on each side, 3Ph

Cleveland TKET-6-T Twin cooking kettle 2009, stainless, steam jacketed twin vessels, 2 x 25L vessels, adjustable temperature controls, 3Ph

REF-2527-2528 INDUFLEX ICS II TWIN CAP SORTER AND FEEDING SYSTEM 2 UNITS IN STOCK Screw cap sorting and feeding system composed of a twin hopper and a twin elevator conveyor. The elevator transports the caps towards the outfeed in the correct direction and position by means of Jetstream conveyors. Manufacturer: INDUFLEX Model: ICS II Serial numbers: 6026 / 6031 Year: 2006 Throughput: 2 x 12,000 caps/hour Power supply: 230-400 V / 50 Hz / 3Ph+N+PE Electricity consumption: 32 kVA Compressed air pressure: 0.63 Mpa / 6.3 bar Overall dimensions: width 1,450 mm, length 3,100 mm, height 2,700 mm Adjustable-height outfeed Weight: approx. 750 kg

Loma IQ Twin head metal detector Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject, 3Ph

Doppelkopfheftmaschine - 2 Stitching heads Stapler Nagel Multinak S Mit der MULTINAK S Doppelkopfheftmaschine mit elektrischem Antrieb heften Sie Broschüren und Blocks bis 27 mm Stärke, für Block- und Sattelheftung. Electric stapling machine with two stapling heads with adjustable distance for block and saddle stapling for brochures in medium to high work volumes, for flat and saddle stapling stiting. Baujahr / Year 1996 Heftköpfe AS für Blocks bis 15 mm / Stapling head AS blocks and brochures up to 15 mm  Heftkopfabstand verstellbar im Bereich von / Distance adjustable between 80-155mm Heftklammernlänge / Staples arm length 6-30mm Heftklammernsorten 24, 26, 50 + Ringklammern / for staples no. 24, 26, 50 and ring staples Technische Daten / Technical Details: Anschluss / power supply 400 V / 50 Hz Maße / Dimensions Width 600 x Deep 750 x Tall 1100mm Gewicht / Weight net 100kgs ...

Twin-headed Stapler Nagel Mulinak Sitcher Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test