134,293 used machines on RESALE, but how to find them? Machine Search
: 23 thread capacity: M10 bore stroke: 90 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 150-1.250/350-3.000 UpM total power requirement: 0,75 kW Overall size: 735x470x1080 mm weight of the machine ca.: 106 kg Standard equipment: - Digital speed display - Movable LED machine light - Stepless spindle speed via frequency converter - Tiltable work table +/- 45 degrees - Mains cable and plug so ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - In accordance with current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 20 bore stroke: 80 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 210-2.500 UpM total power requirement: 0,38 kW Overall size: 620x470x1050 mm weight of the machine ca.: 80 kg Standard equipment: - Number of speed ranges 10 steps - Movable LED machine light - Swivel work table +/- 45 degrees - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - In accordance with current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 mm bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 150-2.500 UpM Power requirement: 16 A total power requirement: 1,5 kW Overall size: 750x450x1745 mm weight of the machine ca.: 187 kg Standard equipment: - Stepless speed adjustment - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 100 - 1.800 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 105-2.650 UpM total power requirement: 0,75 kW Overall size: 750x450x1745 mm weight of the machine ca.: 192 kg Standard equipment: - Number of speed ranges 9x2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug therefore immediately ready for use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm bore stroke: 190 mm turning speeds: 50-1800 U/min Short spindle: MK 4 Table dimensions: 500x400 mm total power requirement: 2,2 kW weight of the machine ca.: 330 kg dimensions of the machine ca.: 670 x 500 x 2120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm threading in St 60: M24 threading in GG 20: M30 : MK 3 spindle stroke: 120 mm : 80-1.125 U/min. throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm distance spindle /table: min. 117 / max. 701 mm feed: 0,1 + 0,2 mm/U height of the machine: ca. 1840 mm weight of the machine ca.: 270 kg Standard equipment: - 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variabl ...
Spindle Speed: 80-3200 U/min. : 30 mm : 25 mm table surface area: 500x365 mm bore depth: 125 mm throat: 260 mm : MK 3 distance spindle /table: 90-840 mm T-slot - width: 14 mm column diameter: 110 mm weight of the machine ca.: 270 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 mm bore capacity in cast iron: 56 mm : 50 mm : M 30 : M36 : MK 4 throat: 300 mm : 615x430 mm : 70-4000 U/min. : 2x14x224 mm Distance spindle/table max.: 147/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,4 mm/U height of the machine: 1885 mm drive motor: 1,8/2,9 kW weight of the machine ca.: 530 kg Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 12 LED machine lamp with radially adjustable light beam, supply voltage 24 Volt, protection class IP 65 Pos. 20.1 T ...
bore capacity in steel (diameter): 40 mm throat: 285 mm bore stroke: 160 mm Spindle Speed: 150-2.000 U/min. spindle taper: MK4 column diameter: 115 mm total power requirement: 1,5/2,2 kW weight of the machine ca.: 275 kg dimensions of the machine ca.: 1000x700x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : M 16 : M 20 : MK 3 : 225 - 4300 U/min. spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm : 132 / 724 mm feed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kW Standard equipment: - Motor protection switch - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection - Speed display digital - Connector (fully assembled, cable length 2 m) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 12 mm : M12 mm : 30 mm : M 16 : M 20 : MK 3 : 225 - 4300 U/min. spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm : 132 / 724 mm feed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kW weight of the machine ca.: 260 kg Standard equipment: - Motor protection switch - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection - Speed display digital - Connector (fully assembled, cable length 2 m) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2.250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm weight: 270 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 232 mm bore stroke: 150 mm Spindle Speed: 115 - 2470 U/min. tool adaptor: MK 3 weight of the machine ca.: 280 kg dimensions of the machine ca.: 500 x 950 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 210 mm : total power requirement: kW weight of the machine ca.: 0.085 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t distance between columns: 680 mm stroke: 150 mm total power requirement: 15 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3 x 3 x 3 m No. 0214 ydraulic high-speed double-column press SMG DS 63 Clearance between the uprights 680 mm, max. distance between table top and ram 385 mm, Ejector force 15kN, largest ram stroke 150 mm. Working area: Table surface 660 x 460 Drive: 15 kW pressing force 630 kN, retraction force 51 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle cone: MK 1 turning speeds: 200 - 3000 U/min table-size: 300 x 220 mm total power requirement: 520 W weight of the machine ca.: 200 kg dimensions of the machine ca.: 8004001800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30.0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 MK table:: 515 x 360 mm turning speeds: 225 - 4300 U/min column diameter: 115 mm distance spindle /table: 132 / 724 mm engine output: 1.0 / 1.6 kW weight: 260 kg Machine height: 1790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - ...
bore capacity in steel (diameter): 40.0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 515 x 360 mm turning speeds: 160 - 2250 U/min column diameter: 115 mm feed: 0.10 + 0.20 mm/U T-slots: 2 x 14 x 224 mm distance spindle /table: 117 / 701 mm engine output: 1.45 / 1.90 kW weight: 285 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for cloc ...
bore capacity in steel (diameter): 36.0 mm bore capacity in cast iron: 45.0 mm throat: 300 mm bore stroke: 160 mm : 4 speeds: 120-900 / 240 - 1780 U/min column diameter: 145 mm table-size: 615 x 460 mm feed: 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement: 1.75 / 2.5 kW weight: 440 kg dimensions: 1200 x 800 x 2300 mm well-maintained condition () current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German T ...
bore capacity in steel (diameter): 30 mm throat: 254 mm bore stroke: 120 mm : 4 Motor output: 9 speeds: 120 - 1810 U/min column diameter: 92 mm table surface area: 475 x 425 mm total power requirement: 1,1 kW dimensions: 915 x 450 x 1705 mm weight: ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can ...
bore capacity in steel (diameter): 30 mm throat: 270 mm bore stroke: 125 mm : 4 Motor output: 9 speeds: 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED machine light integrated in the drill head V-belt cover with s ...
bore capacity in steel (diameter): 40.0 mm bore capacity in cast iron: 45.0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 100 - 1800 U/min column diameter: 145 mm thread: M 24 ST60 thread: M 30 GG20 feed: 0.1-0.2-0.3-0.4 mm/U distance spindle /table: 138 / 688 mm engine output: 1.4 / 2.2 kW weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread dept ...
bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 460 x 460 mm turning speeds: 75 - 3200 U/min engine output: 1,5 kW column diameter: 125 mm thread: M16 ST60 feed: 0,10/0,18/0,26 mm/U dimensions: 800 x 500 x 2200 mm weight: 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40.0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 Kurzspindel MK table:: 420 x 350 mm turning speeds: 160 - 2250 U/min column diameter: 115 mm throat: 293 mm distance spindle /table: min 117 / max 701 mm T-slots: 2 x 14 x 224 total power requirement: 1.45 / 1.90 kW weight: 370 kg dimensions of the machine ca.: 1200 x 800 x 1840 mm Current list price ~ 12.500 euros Special price available upon request Features: - Sturdy column drill press (V-belt) - stepless speed adjustment - pole-changing drive motor - height-adjustable worktable with 2 T-slots - R/L rotation of the drill spindle (reversing switch) - Main switch with motor protection switch - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm threading: bis M 30 throat: 330 mm bore stroke: 180 mm : 4 speeds: 60 - 765 U/min table-size: 720 x 360 mm total power requirement: 2,6 / 3,2 kW weight: 350 kg dimensions: 720 x 1100 x 2050 mm Equipment: - automatic feed - infinitely variable speed - thread cutting device - adjustable drilling depth stop - coolant device - spindle protection - drill chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 280 mm bore stroke: 110 mm spindle taper MT: 3 table-size: 340 x 400 mm turning speeds: 210- 2600 U/min total power requirement: 1,8 kW weight of the machine ca.: 325 kg dimensions of the machine ca.: 950 x 450 x 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M42 throat: 360 mm bore stroke: 200 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4 mm/U spindle turning speed range: 190 - 1900 U/min column diameter: 175 mm table surface area: 550 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Sca ...
bore capacity in steel (diameter): 40.0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 MK table:: 415 x 350 mm turning speeds: 160 - 2.250 U/min column diameter: 115 mm total power requirement: 1.45 / 1.90 kW weight: 285 kg range L-W-H: 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor - Fixed drilling depth stop - Machine table with 2 T-slots Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 / 23 mm throat: 320 mm bore stroke: 180 mm : 4 speeds: 30 - 765 U/min table-size: 720 x 550 mm weight: 480 kg dimensions: 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mm throat: 250 mm bore stroke: 130 mm morse taper: 3 MK table:: 380 x 380 mm turning speeds: 75 - 3000 U/min engine output: 1,1 kW column diameter: 98 mm thread: M16 ST60 dimensions: 700 x 450 x 1500 mm weight: 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 12910 € : 247.87 € : 40 mm : MK 4 : 350 mm : 132-194-277-319-466-666-8 U/min : 2.2 kW : M33 : 755 mm : 480 mm : 2280 mm : 490 kg : 0,1 - 0,2 - 0,3 mm/U : 150 mm : 80 - 880 mm : 1225 mm : 480 x 480 mm : 175 mm Automatic feed with mechanical clutch Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark ALTERNATIVE: VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH PRICE ON REQUEST OPTIONS (PRICES ON REQUEST): Electronic speed variato with speed digital reader(VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 ...
: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...
: neu : 2025 : 030161 : prompt, Zwischenverkauf v : Deutschland : 7350.17 € : 141.86 € : 1 : 23 mm : MK 2 : 260 mm : 20 - 2000 U/min : 1.5 kW : M16x1 : 430 mm : 715 mm : 1800 mm : 290 kg : manuell mm/U : 110 mm : 230 - 850 mm : 420 x 340 mm : 100 mm Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 11530 € : 221.38 € : 40 mm : MK 4 : 300 mm : 75 - 150 - 235 - 325 - 47 U/min : 1.3 kW : Stahl: M 30, Guss: M 32 : 600 mm : 640 mm : 2020 mm : 305 kg : 0,1 — 0,2 — 0,3 mm/U : 160 mm : 125 mm : 420 x 400 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 2 aut. feeds left-right drilling drill guard CE norms user manual in GERMAN OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots Reverse for Tapping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7401.09 € : 142.84 € : 20 mm : MK 3 : 260 mm : 30 - 3000 U/min : 1,5 kW : M12 : 430 mm : 715 mm : 1800 mm : 290 kg : 115 mm : 110 mm : 230 - 850 mm : 420 x 340 mm Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of ...
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7519.51 € : 145.13 € : 23 mm : MK 3 : 260 mm : 20 - 2000 U/min : 1,5 kW : M16x1 : 430 mm : 715 mm : 1800 mm : 290 kg : 115 mm : 110 mm : 230 - 850 mm : 420 x 340 mm Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution o ...
: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 3982 : prompt, Zwischenverkauf v : Spanien : 10830 € : 207.94 € : 1 : 35 mm : MK 4 : 300 mm : stufenlos 100 - 2.000 U/min : 3 kW : bis M 27 : 1100 mm : 600 mm : 1950 mm : 360 kg : 0,10 / 0,20 / 0,30 (3) mm/U : 150 mm : 125 mm : 90-890 mm : 1250 mm : 480 x 480 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE column drilling machine with vario gear 1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display 3 automatic feeds chuck guard left-right drilling T-Slots and integrated coolant equipment in base stand integrated lighting drill guard HEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTS reverse for tapping fast and precise setting and control of the speed without switching operations and without defined levels more particularly robust parts for wear resistant operation and smooth running compact design with high p ...
x-travel: 4000 mm y-travel: 1500 mm z-travel: 3500 mm Control: Siemens 840D tool taper: ISO 50 spindle turning speed range: 5000 U/min power capacity at 100 % load: 37 kW max. torque on the spindle: 1296 Nm rapid traverse X/Y/Z: m/min milling head -swivable: Grad toolpiece magazine: chain magazine: 40 Stück table surface area: dia 1500 mm table load: ja 12 t total power requirement: kW weight of the machine ca.: t Travelling column milling machine with - control Siemens 840D - autom. Bi-rotativ milling head, 1x1°, 5000 U/min - tool changer 2x 40-fold (ISO 50) - chip conveyor - 2 Rotary Tables (dia 1500mm) - Renishaw RMP 60 - Laser Sensopart - Coolant (Through Spindle and External) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 2500 t table length: 5200 mm table width: 2300 mm PRESS FORCES: • CAPACITY : 2500ton • Point pressure capacity: • - Upper 1600t • - Down 900ton • Slide stroke: 650mm • Slide adjustment: 225mm • Slide stroke number: continue 9~25spm • Die-height: 1250mm • Slid size(LxR ,FxB): 5400x2400mm • Bolster size(LxR, FxB, T): 5200x2300x200mm • Balance capacity: 30ton • Main motor: DC 355kw • Feed back(bolster upper side): 700,780mm • Feed back stroke : 550,700,1000mm • Cramp stroke : 0-250mm • Lift stroke: 0~150mm • Transfer inner size(cramp): 650~2200mm • Die cushion capacity • No.1 station 120ton • No.2 station 80ton • No.3 station 60ton • No.5,6,7 station: 5ton • Stroke: 200mm • Bed size: 480x1780mm • Stop time: 430ms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 7160 € : 138.19 € : 30 mm : MK 3 : 250 mm : 245 - 4000 U/min : M25 : 400 mm : 655 mm : 1185 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Replacement column for IDRA OL1800, D260mmx6480mm, (10), 160400 Idra, refurbished Refurbished! - The column has been refurbished by Strate and is ready for immediate use. - It is still in its original Strate delivery packaging. - Sourced from the spare parts stock of a certified manufacturing facility, - In very good condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6480mm, trapezoidal thread TR 260x9mm, approx. 2700kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, ...
Replacement column for IDRA OL1800, extendable, D260mmx6710mm, (11), 111801, Idra, refurbished Refurbished! - The column has been refurbished by Strate and is ready for immediate use. - Sourced from the spare parts stock of a certified manufacturing facility, - In top condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6710mm, can be pulled out trapezoidal thread TR 260x9mm, approx. 2800kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In ...
Replacement column for IDRA OL1800, extendable, D260mmx6710mm, (12), 211286. Idra, refurbished Refurbished! (top condition) - The column has been refurbished by Strate and is ready for immediate use. - It is still in its original Strate delivery packaging. - Sourced from the spare parts stock of a certified manufacturing facility, - In top condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6710mm, can be pulled out trapezoidal thread TR 260x9mm, approx. 2800kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Ca ...
Replacement column for IDRA OL1800 + adjustment nut, D260mmx6480mm, (13), Idra, used Second-hand! - Sourced from the spare parts stock of a certified manufacturing facility, - The column is in second-hand condition but is still in working order. - However, the surface of the column already has numerous surface defects. - The column can be used as a spare or for emergencies. - For this reason, this column is being sold at a particularly low price. Special price Replacement column for IDRA OL1800, D260mm x 6480mm, trapezoidal thread TR 260x9mm, approx. 2700kg Includes an adjustment nut, can be easily turned. We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, ...
: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 € : 132.01 € : 25 mm : MK 3 : 250 mm : 245 - 4000 U/min : 0,7 / 1,3 kW kW : M18 : 400 mm : 655 mm : 1900 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 € : 173.12 € : 30 mm : MK 3 : 250 mm : 65 - 3.060 (8) U/min : 380 mm : 600 mm : 2060 mm : 260 kg : 100 mm : 170 - 660 mm : 1.216 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 10930 € : 209.86 € : 35 mm : MK 4 : 300 mm : 132-194-277-319-466-666-8 U/min : 1.5 kW : M27 : 755 mm : 480 mm : 2205 mm : 385 kg : 125 mm : 90 - 890 mm : 1250 mm : 400 x 420 mm : 150 mm Manual feed Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front Depth scale and adjustable depth stop Thermomagnetic switch Emergency STOP push button Spindle reversing switch Worklight Fixed table Safety drill guard with microswitch CE mark OPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-sl ...
: neu : 2025 : 030140 : prompt, Zwischenverkauf v : Deutschland : 13429.36 € : 257.84 € : 1 : 30 mm : MK 3 : 280 mm : Stufe 1: 125 - 4000, Stuf U/min : 0,9 / 1,45 kW kW : M20 : 820 mm : 520 mm : 1900 mm : 320 kg : 0 - 300 mm/U : 240 - 790 mm : 420 x 340 mm : 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off, programma ...
maximum number of results exceeded
please refine your search
