twin column used for sale

Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible.

Offer 25501 Self-standing – movable / movable – column slewing crane Technical data approx.: - Load capacity 500 kg - E. chain hoist DEMAG DC – ComA 5 Bj.20 - Lifting speeds 4.5 + 1.1 m/min - Projection approx. 2000 mm - Crane girder IPE 180 - Hook height approx. 2400 mm - Swivel radius 360° - Chassis under pedestal bucket for moving the entire crane - Total height approx. 3100 mm - Stand area stand / bucket approx. 1050 x 1050 mm - Total length approx. 2600 mm - Dimensions with landing gear approx. 1400 x 1050 mm - Total weight approx. 3500 kg

pressure: 40 t stroke: 150 mm serial number: 100091 : 2 : Druck & Hub verstellbar pressure: 25 t weight: je 1,5 t safety light frame: ja bei beiden The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 2 Dimensions (L/W/H): 800 x 400 x 1500 mm weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column-mounted jib crane, Vetter, 1,500kg, 6m boom, 6m high – unused - : Price from location: only 13.950.-€ (net)! Manufacturer: Vetter Type Master M Year of Make: 2022 Load capacity P: 1500kg M15-6.0 Column-mounted jib crane designed in accordance with the EC Machinery Directive, EN 13001 and VDE regulations, for outdoor use 4 Beaufort (20 – 28 km/h; moderate breeze). Identification number: 50010400 EN 13001 HC2 S3 HD2 Swivel range SB: 360° ∞ Max. permissible Hoist weight Gk 180kg Max. permissible Hoist speed VH 16m/min Projection A 6000mm Bottom edge boom UK 6000mm Overall height B 6470mm Bolt circle diameter DL 630mm Flange Outer Diameter DF 710mm Beam flange width F 180mm Approach dimension Aa 250mm Approach dimension Ai 915mm Pressure Column Length B1 1540mm max. vertical force Vk max. 32kN max. moment Mk max. 11575kNcm Weight 1756kg Operating ...

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 € : 1181.25 € : 63 to : 750 mm : 500 mm : 170 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 90 mm : 270 mm : 440 mm : 7.5 kW : 1800 mm : 1150 mm : 2750 mm : 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four-column press SP 60 / 670 - Achtermann & Co. Stuttgart -Compressive force 60 tons -Passage between the columns 670mm -Passage between the columns/laterally 400mm - Table size 900x750mm -Height clearance 520mm -6x T-slots in the upper beam -6x T-slots in the table Dimensions: LxWxH 2x1.5x2 meters / Weight 3000 kg

Drilling Ø in St 60/GG 20: 28/32 mm Spindle holder: MK 3 Projection: 250 mm Spindle stroke: 120 mm Table size: 400 x 415 mm Largest distance between table and drilling quill: 665 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Weight: 210 kg Dimensions: 800 x 420/600 x 1790 mm

Column grills width approx. 30 cm, plus another grill in the rear area, total 2 pcs., purchased in 2016 for 182.40 EUR net each

column drill / GILLARDON GB 25 -Drilling capacity / steel 32mm -Drilling capacity / cast iron 35mm -Speed range - Stepless 60-1800 rpm -Direction of rotation / Right-Left -Morse taper MK 3 -Projection 290mm -Quill drilling stroke 175mm -Table surface 450x355mm -Table height adjustment by hand crank -Tapping device -Coolant device -Drill chuck -Analogue speed display -Footswitch -Emergency stop -Documentation Dimensions: LxWxH 0.7x0.7x2Meter / Weight 450Kg

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

Hydraulic cylinder with 4 guide columns, BSE 250.40/25.01.4.201.400, Merkle, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, Technical information: - Double-acting hydraulic cylinder with 4 guide columns - Merkle BSE 250.40/25.01.4.201.400, - Piston diameter 40mm, piston rod diameter 25mm - Max. stroke 400mm, max. 250bar 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. O ...

Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible.

Key data: 100 t

For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force of up to 100 T. The machine has a table size of 800 × 600 mm, a maximum installation height of 700 mm and an adjustable stroke of up to 500 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. Here are the technical data of the offered machine: Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Title: Hydraulic Single Column Press - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15–100 T (adjustable) - Max. installation heigh ...

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Drilling capacity steel/cast iron: 50mm/60mm, spindle axis-column distance min./max.: 350mm/1600mm, spindle end-working surface distance: 350mm-1250mm, horizontal traverse: 1250mm, column arm vertical travel: 580mm, column diameter: 350mm, arm swivel: 360°, speed: 2000rpm, spindle travel: 315mm, torque: 392Nm, feed force: 15.6kN, machine dimensions X/Y/Z: approx. 2500mm/1250mm/3250mm, weight: approx. 3500kg. The coolant pump, the seal retainer and the measuring system are defective. Documentation available. An inspection on site is possible.

Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

TyP / Model: BS 40 AIII Djc Hbvm Toiypmxj Sski Drilling capacity steel / cast iron: 50 / 60 mm Spindle mount: MK 5 Speeds: 32 to 1,400 rpm Feed: 0.11 to 1.73 mm/rev Table: 780 x 650 mm Clamping area: 630 x 500 mm Head height adjustment: 250 mm Stroke: 280 mm Footprint: 700 x 1,200 mm Total connection: 6.7 kW Accessories/equipment: thread cutting function, right-left barrel; autom. Feed, separate control cabinet Condition: good Weight: 1.5 t Dimensions: 780 x 1,200 x 2,700 mm Availability: immediately Location: Thuringia Arnstadt Loading: by buyer Stacker: is available Total weight: 1500 kg Operating voltage: 360 V Control voltage: 220 V Connected load: 5.73 kW

Technical data: Installed power: 0.58 kW Voltage: 380 V Spindle speed: max. 3000 rpm

taper MK: 1 bore capacity in steel (diameter): - mm weight of the machine ca.: 140 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...

(1985) 630t Gräbener Knuckle-Joint Press High-Performance Knuckle-Joint Press This 1985 Gräbener knuckle-joint press is a high-capacity machine engineered for applications requiring extreme force at the bottom of the stroke, such as coining and cold forming. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKN 630 Year of Manufacture: 1985 Nominal Force: 630t Stroke: 112 mm Stroke Rate: 55 strokes/min Shut Height: 800 mm Tool Holder Adjustment: 80 mm Motor Output: 25 kW Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, 50Hz

(1973) 180t Gräbener Knuckle-Joint Press Precision Knuckle-Joint Press for Detailed Cold Forming This 1973 Gräbener model utilizes a knuckle-joint mechanism to deliver high pressing force with controlled ram speed, making it ideal for precision coining and embossing tasks. It features a compact design with a 180-ton capacity and is equipped with a 5.5 kW motor for reliable industrial operation. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 180 Year of Manufacture: 1973 Nominal Force: 180t Stroke: 50 mm Stroke Rate: 40 strokes/min Shut Height: 305 mm Tool Holder Adjustment: 40 mm Clearance Between Uprights: 390 mm Table Area (Width x Depth): 370 mm x 450 mm Tool Holder Mounting Surface (Width x Depth): 360 mm x 200 mm Tool Holder Shank Hole (Ø x Depth): 40 mm x 75 mm Motor Output: 5.5 kW Motor Speed: 1,450 ...

(2000) 1000t Müller Knuckle-Joint Press High-Capacity Precision Knuckle-Joint Press This modern model represents a significant leap in pressing power, offering a massive 10,000 kN capacity and it is designed for large-scale precision operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Müller Model: KNP 1000 Machine Number: 2912 Year of Manufacture: 2000 Nominal Force: 1000t Work Capacity: 33 kJ Ram Stroke: 100 mm Ram Adjustment: 65 mm Stroke Rate: 40 strokes/min Shut Height (Table to Ram): 400 mm Ram Surface Area (W x D): 700 mm x 500 mm Table Surface Area (W x D): 700 mm x 750 mm Motor Output: 30 kW Operating Voltage: 400 V Safety Distance: 225 mm Limit Value (Stopping Time): 97 ms Total Weight: 42,000 kg Machine Dimensions (W x D x H): 2.3 m x 3.4 m x 4.1 m

(2013) 400t Müller Knuckle-Joint Press Precision Knuckle-Joint Press for High-Speed Forming This year-2013 Müller press provides a 4,000 kN pressing capacity and a high-efficiency 55 strokes per minute cycle rate. Engineered for modern industrial precision, it features safety response times suitable for high-volume production environments. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Müller Model Type: KNP 400 Machine Number: 2703 Year of Manufacture: 2013 Nominal Force: 400t Work Capacity: 13 kJ Ram Stroke: 70 mm Ram Adjustment: 45 mm Stroke Rate: 55 strokes/min Shut Height (Table to Ram): 380 mm (Stroke down, adjustment up) Ram Surface Area (W x D): 500 mm x 400 mm Table Surface Area (W x D): 500 mm x 500 mm Motor Output: 15 kW Operating Voltage: 400 V Safety Distance: 190 mm Limit Value (Stopping Time): 95 ms Total Weight: 1 ...

(1978) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1978 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Frame Width: 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time: 206 ms Safety Distance: 330 mm

(1979) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1979 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Clearance Between Uprights (Frame Width): 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time (Stopping Time): 160 ms Safety Distance: 266 mm

(1986) 600t Gräbener Knuckle-Joint Press Fully Automated High-Precision Short-Stroke Forming This knuckle-joint press delivers a nominal force of 600 metric tons, designed for high-precision forming applications requiring controlled force near bottom dead center. Technical Details ‍ ‍Machine Type: Knuckle-Joint Press Model: GK 600 ‍Nominal Force: 600t ‍Year of Manufacture: 1986 ‍Rated Force Travel (Pressing Path): 1.7 mm ‍Nominal Work Capacity: 10,200 Nm ‍Stroke: 100 mm ‍Stroke Rate: 45 strokes/min ‍Shut Height (Max. Die Space): 360 mm ‍Tool Holder Adjustment: 50 mm ‍Clearance Between Uprights: 580 mm ‍Table Area (Width x Depth): 550 mm x 430 mm ‍Tool Holder Shank Hole (Ø x Depth): 65 mm x 105 mm ‍Motor Output: 15 kW ‍Motor Speed: 1,500 rpm ‍Pneumatic Connection Pressure: 5.5 bar ‍Operating Voltage: 3x 380V / 220V,  ...

(1994) 1250t Wolff Knuckle-Joint Press High-Precision Knuckle-Joint Press for Massive Forming Loads This Wolff press is a heavy-duty powerhouse, delivering a massive 12,500 kN of force specifically rated at 30° before Bottom Dead Center. Engineered for longevity and extreme precision, it features a 32-ton frame, permanent oil pressure lubrication, and electronic force monitoring to ensure consistent performance during high-capacity cold-forming operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Wolff Model: KHP 1250 Year of Manufacture: 1994 Nominal Force (30° before BDC): 1250t Stroke Rate (Continuous): 25 strokes/min Ram Stroke: 90 mm Ram Adjustment: 70 mm Shut Height (min/max): 490 mm / 560 mm Max. Distance (Table to Ram): 625 mm Clearance in Ram Frame: 680 mm Table Surface Area (W x D): 660 mm x 660 mm Ram Surface Area ( ...

(1979) 360t Gräbener Knuckle-Joint Press High-Force Knuckle-Joint Press for Precision Forging and Coining This Gräbener GK 360 is a specialized industrial press designed for operations requiring extreme force and high-definition detail, such as coining, cold forging, and precision sizing. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 360 Year of Manufacture: 1979 Nominal Force: 360t Stroke Length: 90 mm Stroke Rate: 60 strokes/min Max. Flywheel Speed: 360 rpm Shut Height: 430 mm Tool Holder Adjustment: 40 mm Motor Power: 28 kW (1,475 rpm) Operating Voltage: 380V / 220V, 50 Hz Pneumatic Requirement: 6 bar Overrun Time: 123 ms Safety Distance: 197 mm Total Weight: approx. 6,500 kg

(1988/2025) 600t Gräbener Knuckle-Joint Press Heavy-Duty 600-Ton Precision Forming Press - 2025 General Overhaul This Gräbener GKS 600 is a high-capacity knuckle-joint press designed for demanding metal-forming tasks like cold forging, embossing, and heavy-duty coining. It was manufactured in 1986 and has undergone a complete general overhaul in 2025, ensuring modern reliability while maintaining its massive 6,000 kN nominal force. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKS 600 Nominal Force: 600t Year of Manufacture: 1988 (General Overhaul: 2025) Stroke Length: 160 mm Production Speed: 35 strokes per minute Nominal Energy: 10,200 Nm Nominal Force Path: 1.7 mm Frame Width: 580 mm‍ Table & Tooling Dimensions Table Surface (W x D): 550 mm x 620 mm‍ Ram/Tool Holder Surface (W x D): 550 mm x 430 mm‍ S ...

(1994/2026) Gräbener 360t Knuckle-Joint Press Precision 360-Ton Forming Press - 2026 General Overhaul This Gräbener GK 360 is a high-precision mechanical press designed for specialized metalworking tasks such as coining and cold forging. This unit has been freshly overhauled in 2026, combining its proven knuckle-joint engineering with modern reliability. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 360 Press Capacity: 360t Year of Manufacture: 1994 (General Overhaul: 2026) Stroke Length: 60 mm Production Speed: 60 strokes per minute Frame Width: 460 mm Machine Weight: approx. 6,300 kg‍ Table & Tooling Dimensions Table Surface (W x D): 440 mm x 525 mm‍ Ram/Tool Holder Surface (W x D): 440 mm x 320 mm‍ Tool Holder Adjustment: 40 mm‍ Shank Hole: 65 mm x 105 mm deep

faceplate diameter: 1400 mm swing diameter: 1600 mm turning height: 1200 mm turning speed range - milling: 1 - 240 U/min Control: Siemens SIN 820T ram head - cross travel: 1000 mm total power requirement: 55 kW weight of the machine ca.: dimensions of the machine ca.: m A.T.C. 12 positions Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 12000 mm y-travel: 2000 mm z-travel: 1000 mm control: E.C.S. 2351 taper ISO: 50 P.D.B. Table dimensions: 450 x 450 mm spindle speeds: 0 - 1500 mm total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m Mist extraction Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mm turning height: 1600 mm turning diameter over bed: 2150 mm turning speeds: 3,15 - 250 U/min voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm turning height: 1500 mm turning diameter over bed: 2700 mm turning speeds: 1,9 - 60 (16x) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1170 mm swing diameter: 1520 mm turning height: 1000 mm stroke: 660 mm turning speed range - milling: 9 - 313 U/min total power requirement: 50 HP weight of the machine ca.: dimensions of the machine ca.: m 4 positions turret on rail 4 positions turret on side head Power elevating rail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 900 mm swing diameter: 1220 mm turning height: 810 mm stroke: 660 mm turning speed range - milling: 8 - 300 U/min total power requirement: 50 HP weight of the machine ca.: dimensions of the machine ca.: m 4 positions turret on rail 4 positions turret on side head Power elevating rail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2700 mm turning height: 1600 mm turning speed range - milling: 1,18 - 32,5 U/min turning speed range - milling: 4,25 - 117 U/min workpiece weight: 10000 kg side head - cross travel: 800 mm ram head - cross travel: 45 degrees - 1000 mm ram head - cross travel: 30 degrees - 1000 mm total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: m 2-Axis D.R.O. 5 positions turret The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2000 mm turning height: 1500 mm turning diameter over bed: 2400 mm table load: 10 t turning speeds: 2 - 100 (18x) U/min voltage: 380 V ram head - vertical travel: 1000 mm total power requirement: 45 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2200 mm, 600 mm, 600 mm

Travelling column milling machine Manufacturer Ibarmia Type ZV40 Year of construction 2000 Control Heidenhain TNC 410 Table size 2600 x 650 permissible. Load 2300kg Travel X/YZ 2200/600/600 Tool holder SK40 24 Way Tool Changer max speed 8,000rpm Partition wall for pendulum operation Electronic Handwheel HR410 Chip conveyor Glass scales in all axes Guide of the Y-axis would have to be redone In 2018, the machine got a new guide in Z and X axis, and a new main spindle. Machine is fully functional except for the linear guide of the Y-axis. Machine has the following dimensions: L x W x H 4200 x 3000 x 3050, weight 12000kg. Without the vices in the photos.

Load capacity 1000 kg Total height – 455 cm (505 cm) Free space under the boom – 360 cm Hook path - 300 cm Column – 455 or 505 cm (to choose from) Flange – 70 x 70 x 3.5 cm Chain hoist GIS 800 kg, year 2020 - with warranty Total weight – 850 kg Colour – RAL 7044 Year of construction – 1987 – after overhaul – Documentation

Press force: 100t, stroke rate: 60/min, ram stroke: 8mm-137mm, ram adjustment: 80mm, throat depth: 375mm, table dimensions X/Y/Z: 800mm/630mm, machine dimensions X/Y/Z: approx. 1500mm/2400mm/3500mm, weight: approx. 8800kg. An on-site inspection is possible.

Drilling Ø to: 30 mm Spindle holder: MK 3 Quill stroke: 120 mm Table clamping surface: 335 x335 mm Table swivels horizontally: 360° Table adjustment via hand crank approx.: 550 mm Largest distance between table and drilling quill: 550 mm Largest distance between machined base plate and drill quill approx.: 1120 mm 12 spindle speeds: 160 - 930 rpm Drive motor: 380 V, approx. 0.8/1.3 kW Space requirement: 900 x 470 x 1780 mm

Column drill WEBO Varia 30, Masch.-Nr. E595/37, stroke approx. 200 mm, table ø total approx. 600 mm, machine height with motor approx. 2,600 mm, ATTENTION: Machine must be dismantled for removal from the building, location basement only elevator available

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

- KNUTH MARK 7 column drill, built in 2000 - Robust industrial design, suitable for metalworking and workshop operation - Equipped with cross table for precise drilling and light milling work - Motor power 0.75 kW, connection 400 V, 3 phases - Manual operation, classic gear drill - Including chuck and accessories shown - Condition: used, with signs of wear usual for age - Paint chipping and slight corrosion present on the work table - Functional - Stable machine body, ideal for workshop, metal construction or maintenance - Compact design with solid column and adjustable drill head - Cross table enables exact positioning of the workpiece - Serial number: 119652 - Loading and removal by buyers Auction-ID: 04E-B4B-1