133,384 used machines on RESALE, but how to find them? Machine Search
pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single-column eccentric press AMBOLD type PEEV 25.2Masch. No. 11734 / 02 Year of construction 2002Compressive force 25 ton. Projection 200 mmTable area 520 x 400 mmPlunger area 155 x 155 mmHole in table 185 x 155 mmStroke adjustment 4-80 mmPlunger adjustment 40 mmInstallation height max. 270 (largest stroke in UT, table below)Clamping pin hole 32 mmTable height adjustment approx. 150 mmPlunger strokes 160 strokes/min. Motor power 2.2 kWNet connection 400 volts, 50 Hz pneumatic clutch-brake combination
Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75
Column Drill IXION - MAXION Type Unimax 3Fabr. No. 201516 year of construction 2009Drilling capacity 30 mmSpindle holder MK 3 - short quillThroat projection 260 mmQuill stroke 125 mmTable size 360 x 500 mmColumn diameter 110 mmSpindle speed 80 - 3200 rpm. infinitely variableMotor power 0.8 / 1.5 kWWonnection connection 400 volts, 50 Hz- Spindle speed via 2 V-belt steps, 2 motor speeds and infinitely variable via variator drive- Motor speed level 1 for clockwise and counterclockwise rotation, motor speed level 2 for clockwise rotation - handwheel
Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2Pneumatic table press, embossing pressFabr. No. 97148 Year of construction approx. 1980Compressive force: 10 tonProjection: 100 mmPlunger stroke: approx. 25 mmPlunger surface: 32 mmTable size: 250 x 220 mmTable opening: 53 x 53 mmTable height: 1060 mmInstallation height: 155 mm- very stable construction- Hydro-pneumatic press with pressure transmission air on oil- pneumatic foot switch- Plunger with internal thread M12- Metal substructureSpace requirement L x W x H 850 x 620 x 1560 mmWeight
Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height
Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm
pressure: 75 t throat: 280 mm stroke: 303 mm total power requirement: 15 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 60 mm throat: 400 mm bore stroke: mm total power requirement: 4,4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 250 mm stroke: 100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 1000 x 1700 x 2600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 10 mm throat: 0 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t throat: 0 mm stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weigh ...
pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm total power requirement: 97 kW weight of the machine ca.: 25000 t dimensions of the machine ca.: m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V - ...
pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M36 throat: 400 mm bore stroke: 230 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 54 - 1032 U/min transmission ratio: 12 Stufen column diameter: 200 mm table surface area: 550 x 550 mm total power requirement: 3,0 kW weight of the machine ca.: 0,72 t dimensions of the machine ca.: 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-a ...
bore capacity in steel (diameter): 60 mm bore capacity in cast iron (diameter): 70 mm threading cutting capacity:: M50 throat: 420 mm bore stroke: 260 mm spindle taper: MK 5 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 64 - 1210 U/min transmission ratio: 12 Stufen column diameter: 220 mm table surface area: 600 x 600 mm total power requirement: 4 kW weight of the machine ca.: 0,82 t dimensions of the machine ca.: 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adj ...
bore capacity in steel (diameter): 28 mm throat: 320 mm bore stroke: 150 mm spindle taper MT: 3 MK table:: 500 x 350 mm column diameter: 105 mm turning speeds: 75 - 3010 U/min total power requirement: 0,9 / 1,2 kW weight of the machine ca.: 235 kg. range L-W-H: 1740 x 670 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 500 x 460 mm column diameter: 115 mm turning speeds: 75- 3200 U/min feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 2,2 x 0,8 x 0,7 mm Column drilling machine with: automatic feed Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm spindle taper MT: 4 MK table:: 560 x 560 mm column diameter: 140 mm turning speeds: 50 - 1450 U/min feeds: 0,1 - 0,2 mm/U total power requirement: 1,5 kW weight of the machine ca.: 580 kg range L-W-H: 2,27 x 0,7 x 1,1 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel: 40 mm threading cutting capacity:: M30 throat: 310 mm bore stroke: 175 mm spindle taper: MK 4 feed range - spindle: 20 - 400 mm/U spindle turning speed range: 60 - 1250 / 120 -2500 U/min transmission ratio: 2 Stufen column diameter: 120 mm table surface area: 550 x 400 mm total power requirement: 1,5 / 3,0 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE m ...
bore capacity in steel (diameter): 32 mm throat: 257 mm bore stroke: 115 mm boring spindle: MK 4 boring chuck: 16 mm bore depth: 120 mm table surface area: 475 x 425 mm column diameter: 92 mm total power requirement: 1,1 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark The data for this ad was creat ...
bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 160 mm spindle taper MT: 4 MK table:: 500 x 420 mm column diameter: 120 mm turning speeds: 85 - 1800 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 0,85 / 1,5 kW weight of the machine ca.: 500 kg. range L-W-H: 965 x 515 x 1920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 0 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark T ...
pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mm throat: 250 mm bore stroke: 130 mm spindle taper MT: 3 MK table:: 380 x 380 mm column diameter: 98 mm turning speeds: 75 - 3200 U/min feeds: mm/U total power requirement: 1,1 kW weight of the machine ca.: 220 kg. range L-W-H: 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two fully functional Schmiedl column-mounted slewing cranes are available. 1) Schmiedl crane type 3, year of construction: 1993, load capacity: 1000kg, radius: 5000mm. 2) Schmiedl crane type 3, year of manufacture: 1992, load capacity: 1000kg, radius: 7000mm. On-site inspection is possible.
nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 325 mm bore stroke: 170 mm table surface area: 730 x 590 mm 0: 130 - 1200 U/min feed: 0,09 - 0,16 - 0,28 mm/U tool taper: MK 4 total power requirement: 1,8 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drill with: Feed 2 gears Left/right rotation Foot switch Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: D1209, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mobile column lifter, Dimensions: W 1500 x H 2800 x D 1100 mm, Emptying height: 2000 mm, Other: With chain drive
Stock number: D1211, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Motor: 1,5 kW - 3x220 Volt, Dimensions: W 1200 x H 3400 x D 500 mm, Emptying height: Variable - 2000-2700 mm, Other: Stationary with spindle - Max 300 kg
Stock number: D913, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Construction: For floor mounting, Tipping height: Max 1900 mm, Power: 0.75 kW, Voltage: 3x380 Volt, Amperage: 2,05 Amp, C/S: 50, Other: Lifting fork with slit grip for lifting/emptying of VEMAG wagons
Stock number: D1115, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Dimensions: W 2500 x H 3950 x D 1800 mm, Discharge height: 2500 mm, Shielding: Without shielding, Power: 2.2 kW, Voltage: 3x380 Volt, Amperage: 5.2 Amp, C/S: 50, Other: For lift and unloading of max 1000 kg bins
Stock number: D1088, Column lift, painted edition., 1,1 kW motor, 220/380 Volt,, spindle type., Lifting fork with slot grip,, for lifting and emptying of Vemag wagons., Total height 2850 mm.,, estimated tipping height 1900 mm., Material: Painted edition
Stock number: SF171, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Gel press filter column, Construction: Hanging in tiltable stand, Top: Air controlled press cylinder, Bottom: Product filter, Dimensions: Column - Ø 300 x H 1000 mm , Type: Dan-Process
Stock number: SF015, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Gel press filter column, Construction: Hanging in tiltable rack, Top: Air driven pressing cylinder, Bottom: Product filter, Dimensions: Ø 200 x H 900 mm, Manufacturer: Dan-Process, Other: Dynamic axial compression (DAC) flow-through bed
Column-Mounted Crane DEMAG Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist In good condition Voltage: 380 V Weight: approx 250 kg
hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 t stroke: 600 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single column hydraulic press MAE type S63SZ SOMasch.Nr. 551277 year of construction approx. 1977Nominal compressive force 63 ton. Pressing force: 50 tons (Practically tested)Projection 320 mmTable surface 850 x 630 mmRam area 1050 x 500 mmRam stroke 500 mmInstallation height max. approx. 730 mmTable height above floor 970 mmTank capacity hydraulics 600 litersDrive power 15 kWNerg connection 380 volts, 50 Hz- Hydraulic drawing cushion under the table with holes through the table top- 2-hand control- Electrical control cabinet damagedSpace requirement L x
maximum number of results exceeded
please refine your search
