We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,375 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 101 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 101 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation down to -15 / -10°C suction temperature. Includes crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 25.2 Heating water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 4.4 Available pump pressure bar: 0.616 Ambient temperature +7 °C Cooling capacity kW 22.8 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 3.88 Available pump pressure bar: 0.694 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 12.51 Max. current (A) 30,41 Sta ...
used
Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Magnetic drum MATEC For iron capture Length about 400 mm Drive about 0.37 kW Gearbox engine with tin slide Weight about 150 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...
new
Slanted elevator with Rätzmühle RM4 Technical data: Nominal output up to 3 000 kg/h Power: Slanted elevator 0.55 kW Mill 4/3.3 kW Circumcate pump 2.2 kW Electric connection 400V 50Hz (3 phases) Electrical protection 32 A Dimensions: Length 3 540 mm Width 935 mm Height 2 585 mm Discard or drop-in height 850 mm Weight 350 kg Material 1,4301/AISI 304 Connections: Connection for cleaning 1/2 "inside Connection for washing containers 2 "outside Height corn chee-ejection 1 570 mm Can be used for nuclear and stone fruits, berries, vegetables Delivery 7 mm, 9 mm and 12 mm cutting sieve
new
Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...
used
Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one drill bit at a time D6 mm (Safety Signs) Drilling unit for holding multiple drill heads (Griffolive) Drilling unit for holding multiple drill heads (cup belt) Pneum. Swivel device for 2 pos. Extensi ...
used
Table belt grinding machine Bürkle L x W x H: 3.5 x 1.7 x 1.8 m Built in 1963 Weight approx. 650 kg The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
The machine is in good technical condition. Clamping surface of the table: 1760x500 mm Steering system: Heidenhain 17K011 Tool changer: automatic - 36 tools Max. workpiece weight: 600 kg Clamping system: DIN69871-A SK40 Number of revolutions: 40-8000 Machine dimensions: approx. 3800x2900x3100 mm Machine weight: 9500 kg By prior arrangement, the possibility of a tour in progress.
used
Ship unloading system TA 12/15 FA 38 of the manufacturer NEUERO Engelbrecht + Lemmerbrock GmbH & Co., Melle. Built in 1988 It is a pneumatic suction system for the extraction and conveyance of grain or similar pneumatically conveyable bulk materials from ships. Via a telescopic swivel arm and a suction nozzle, the material to be conveyed is sucked in by the air flow generated by the blower and conveyed into the suction separator. There, the material to be conveyed is separated from the suction air flow and discharged via the rotary valve. All motion drives of the telescopic boom are hydraulic. Electrical connection: 380 V Technical documentation of the manufacturer and various invoices for replacement parts available. A magnetic separator was retrofitted. The rotary valve was replaced in 2018 (EUR 8,875) and has not been used much since then. New filters available. ...
used
Saw motors with flanges 2 pieces brand new 2 pieces used, re-edited in 2012 1.5 kW Flat rate for 4 engines EUR 360.00 The engines are in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Clever thermoforming machine with 2-channel scale, it is new and only worked for 3 years and then it was stopped for more than twenty years. Scale included
used
Key data: 75 , 10 , 11
BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...
used
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 21 Max. current (A) 36 Starting current circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401928 Year of construction 2023 Condition: Optical 2, Technically ok used (Subject to technical changes and prior ...
used
<b>Features:</b> Used pallet roller conveyor from Pack & Roll GmbH Fuesse to order separately Geraeuscharm Condition: fully functional with traces of use Ideal for fast material transport Professionally dismantled and packaged Color: Silver Drive: Gravity Total 14.58m plug available <b>Technical data: </b> Dimensions of the roller conveyor Total quantity in stock: approx.: 14.580mm Length per segment: 3645mm Total width: 1150mm One brake roller is available per segment Diameter of brake roller: 90mm <b>Details of the role</b> Clamping length: 1055mm Diameter approx.: 60mm Axis distance: 130mm, adjustable Material: steel, galvanized <b>Information on the framework</b> Height: 80mm Width: 40mm <b>Pallet roller conveyor</b> The roller conveyor is ideal in the picking zone for int ...
used
Drum motors for conveyor belt drives according to the list in photo The motors are in good condition, ready for operation Flat rate for all engines EUR 3800.00 Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 21 Max. current (A) 36 Starting current circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401928 Year of construction 2023 Condition: Optical 2, Technically ok used (Subject to technical changes and prior ...
used
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic fuel injectors, buffer tank 678 ltr. and built-in P3 circulation pump. Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 79.48 Max. current (A) 142.2 Starting current circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200356834 Year of construction 2020 Condition: Optical 2 , Technically ...
used
Automatic filling plant Logdos Späth GmbH Type K-DOS. F/AL 40/ EX EX protected mobile on wheels Programable X/Y axis and pallet image Very good condition, directly from production!
used
Semi-automatic bag emptying system with attachment filter Infastaub; optionally associated powder conveyor system.
used
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic fuel injectors, buffer tank 678 ltr. and built-in P3 circulation pump. Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 79.48 Max. current (A) 142.2 Starting current circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200356834 Year of construction 2020 Condition: Optical 2 , Technically ...
new
ISITAN BENDING MACHINE HORIZONTAL TYPE HP 22 - Capaciteite 22 ton - Hydraulic - Slag 200 mm - Digital uitlezing - Digital slag instelling - Table 1100 x 625 mm - Twee hands bediening of voetbediening - Centraal smeersysteem - Materiaalaanslag - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Plasma cutting machine used, little used, in very good condition. Ideal for the production of angular or round air ducts. Max sheet size: 3000x1500mm Facilities: â?¢ Sectional suction â?¢ Autom. Label â?¢ Production program "ViaDuct" (air duct production) on a separate PC â?¢ Network connection â?¢ Power source:ThermalDynamicsCutmaster A40 Suction filter available in separate display.
used
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Otto Hänsel GmbH Type: HWR Contents: 330 l Net capacity 200kg Output: from 300 kg/h up to 800kg/h, in depend of product Enginepower: 3,8/3,1 kW Agitator speed: 90 / 45 n/min. steampressure: 10 atü steamconsumption: bis 120 kg/h Steam: Sattdampf, bis 10 bar dimensions: ca. 1500 x 1325 x 1950 mm weight: ca. 1280 kg different: Copper inner shell refurbished from the last owner, this mean checked, cleaned, defect parts changed, paints I offer this machine in checked/cleaned/painted” condition
used
Many thanks for your interest in our machinery, please find below our offer: manufacturer: Otto Hänsel GmbH Type: HVK 305 Volume: up to 250kg engine: 1,5 / 1,2 HP Speed: 46 / 23 n/min. steam pressure: 10 atü steam consumption:max. 135 kg/h dimensions: 1650 x 1650 x 2000 mm (lxwxh) We offer this machine in checked, cleaned, painted” with new bears and seals' condition, without warranty
used
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of constru ...
Eccentric screw pump SP4/M5 with frequency inverter and bypass Self-priming eccentric screw pump mounted on a chassis, with dry run protection, level sensor and welding adapter Technical data: Rated power 400 - 1 980 l/h Engine power: 1.1 kW Drive: three-phase motor with frequency converter mounted Electrical connection 230/400V 50Hz (3 phases) Weight 24 kg Material 1.4301 / AISI 304 Connections: DN32 EG/AG Temperature: max. 60° Suction height: 4 m Ws
used
Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of constru ...
used
Suction system suitable for the offered plasma cutting system. Used but fully functional in good condition. Installation indoors and outdoors possible. With integrated start-up control. Receptacle with quick release. Technical data Power: 7.5 KW Air flow Demonstration possible.
used
Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...
new
Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Months ...
new
Centrifugal pump with switch, as good as new
new
As a standard solution for feeding screening machines or other processing machines, we offer our RF pipe conveyor system. As with all machines and systems of KELLNER Siebtechnik GmbH, we also use our modular system to offer individual solutions. Our RF system has been designed in such a way that the screen material can be unloaded directly as bagged goods or pre-screened via a sieve insert before it is transported to the machine. In this way, you can buy exactly the technology that you actually need in your daily practice. Our MACHINES of the RF series are also characterized by design advantages as well as simple retrofit solutions.
used
This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for its age as serviced on an annual basis directly by Komage.
new
Below you can see the first impressions of our mobile screening machine, which was designed for separation tasks in the outdoor area. The system can separate different types of material into two fractions, depending on the selection of the mesh widths, the degree of the sifted material can be adjusted. The two fractions are discharged into wheelbarrows via the outlets of the screening machine. For the removal of fine goods, the stern must be removed. The coarse material enters another wheelbarrow or a suitable container via a second slide. The mobile screening machine can be rented and purchased. Ready to drive 450Kg
Qty. 1 Second-hand Refining system using Argon Mfc.: FOSECO GmbH Model: FDU Type: Roto-Stativ Built: 2005 Max. pressure: 5 bar Capacity: 28 000 T/annum Degassing and purifying of non-ferrous metals and alloys by argon or nitrogen. Max. revolution: 400 RPM Power: 2.2 kW, 440 V, 3 ph., 50 Hz Rotor shaft length: 2000 mm Rinsing time: controlled in the range of 1-20 min. Degassing head lift: Mfc.: W. Flender Lifting speed: 3 m/min. Motor power: 0.75 kW Total weight: 1050 kg
used
Red transport crates are hereby offered for sale. These are made of plastic and have the following dimensions: ( LxWxH ) 60 x 40 x30cm If necessary, the boxes are also available several times. Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No. ...
used
Machine Type: TIG Welding Machine gas-cooled DC system Brand: Merkle Type TIG 160 DC Connection voltage 1 x 230 Volt Adjustment range 4 – 160 amps Duty cycle 35% ED at 160 amps 60% ED at 140 amps 100% ED at 120 amps Infinitely variable current adjustment max. weldable material thickness 4 mm Cooling system by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 560 x 230 x 480 mm Weight 17 kg Age approx. 25 years Optional accessories Connection for handheld and foot remote controllers Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch ABL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box ...
used
Machine Type: TIG Welding Machine gas-cooled DC and AC system Brand: Merkle Type TIG 200 AC DC Serial No. 23.573 Connection voltage 1 x 400 Volt Adjustment range 5 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 5 mm Aluminium = 3 mm Cooling system by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 25 amps Dimensions L x W x H 610 x 220 x 460 mm Weight 42 kg Age approx. 25 years Optional accessories Connection for handheld and foot remote controllers Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges ...
used
Parts cleaning system Industrial washing machine degreasing made entirely of stainless steel! Manufacturer Render Type W175 Built: 1994 5 loading trolleys with 5 washing baskets, Basket size 1,125 x 1,125 mm Manual workstation with viewing window on one side with integrated high-pressure cleaner. Machine to be loaded/unloaded from both sides! Machine comes from an operating resolution and was in use until dismantling. Tank capacity approx. 2,000 litres, oil scimmers, filters, high-pressure pumps... Vertical door opening (lifting doors) on two opposite sides. This allows you to load on one side and unload on the other side. Due to the very high inner height, the system offers an optimal possibility to accommodate both very heavy laundry material as well as parts with large dimensions.
used
Stainless Steel Tank 2000 L Manufacturer: Szaimert Maschinen GmbH Frequency: 50 Hz
used
Industrial washing machine degreasing Disse GmbH Industrial washing machine for cleaning and degreasing machine parts of all kinds Rotary basket diameter approx. 95cm Two pneumatically opening doors on each side for: dirty side / clean side Outer mass Height approx. 240cm Width approx. 120cm Depth approx. 140cm Weight approx. 800kg
used
Key data: 420 mm, 1500 mm, 210 mm
well-preserved, used lathe Ramo a42 Built in 1987 Rapid traverse for longitudinal and flat Foot brake Circumferential diameter over bed 420 mm Center width 1500 mm Speed range 25-2000 rpm Center height 120 mm Spindle bore 80 mm Quick-change bracket Multifix Coolant device with chip tray Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved. Mechanische Werkstätte Höbbelmann GmbH Niederkasseler Str. 3a 51147 Cologne Phone: 02203/83584 eMail: hoebbelmannt-online.de
used
Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!
used
cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden
used
Overview The FAMIX 30000 2 - components mixer was built in 2003 by the German manufacturer H. FALTERBAUM FAMIX-MASCHINENBAU GMBH. The machine is out of operation since seven years and therefore needs some replacement like gaskets. Technical Details Capacity: 30,000 l/h Siemens S7 control Two components (water, syrup, CO2)
used
Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible