turret used for sale

Mori Seiki SL 303 MC/1500 cnc lathe Mori Seiki SL 303 MC / 1500. 3-axis machine. Turret with 12 stations, all of them motorized. C axis. Autoblok hydraulic rear window diameter 245 mm. Automatic and programmable doors. Integrated main head motor 22/18.5 KW. Direct motor powered tools 7.5 kW. High chip removal torque 920 N/M. Main head size A2-11. Bar pitch 90 mm. 250 mm Autoblok spindle plate with metric system. Plate with quick change of claws. Independent and programmable tailstock in Z axis movement by hydraulic fixation with M codes. Prismatic guides on all axes. Main head speed 3,000 rpm. Motorized tools speed 3,000 rpm. Turning diameter 755 mm. Machinable diameter 450 mm. Machinable length 1,450 mm. Mapps II conversational automatic programming system. 3D graphic simulation of part and machining times. Automatic effort control and too ...

Mori Seiki NL 2500 SMC. Year 2008. 5-axis machine. Subspindle. Turret with 12 stations, all of them motorized. C axis on both spindles. Integrated main head motor 18.5 KW. Integrated 11 KW sub-spindle head motor. Direct motor powered tools 5.5 kW. Engine starting torque 640 N/M. Motors without belts or steps. Main head size A2-8. Secondary head size A2-6. Bar pitch 80 mm. 250 mm main spindle plate with metric system. 170 mm subspindle plate with metric system. Prismatic guides on all axes. Main head speed 4,000 rpm. Motorized tools speed 6,000 rpm. Turning diameter 755 mm. Machinable diameter 365 mm. Machinable length 755 mm. Oil cooler for both Daikin heads. Mapps 4 conversational automatic scheduling system. Automatic effort control and tool consumption monitor. Rapid movement speed 30 m/min in the X and Z axis. Turret change indexin ...

Used Filling Monoblock for Wine Bertolaso 15000 BPH 2001 Rinser Automatic CALIPSO 63mm 2 450mm rotary rinser with 63 spray nozzles that penetrate 90mm deep into the bottle 2 channel rinser for steam sterilisation Support structure completely covered with AISI 304 stainless steel sheets AISI 316 stainless steel gripper elements with jaws made of food grade material AISI 316 stainless steel spray nozzles and spray valves Stainless steel drip tray with drain line pressure reducer for rinsing agent total treatment time at 15 000 bph 12 seconds Filler Low vacuum filling machine model ENOICA 72 2800 mm with 72 filling valves Ring bowl completely made of stainless steel AISI 304 bowl bottom with slope filling valves completely made of stainless steel AISI 316 Electric filling bowl height adjustment by push buttons on the control panel of the machine Electronic filling level probe Endress Hauser ...

01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...

Used Complete Bottling Line for PET and Glass 2007 Depalletizer This unit takes bulk of bottles that are stacked on a pallet and places them onto an accumulation area before entering the Lowerator unit The operation of the machine is manual There are some forklift interactions with loading full pallets onto the infeed conveyor removing the empty pallets from the discharge conveyor and the placement of empty pallets at the operator level layer dividers Cleaning is carried out with the machine switched off and the hoist lowered Bottle Lowerator The Lowerator transfer the bottles from the Depalletiser operator level to the lower level Rinser before entering the Filler This unit is used for glass bottles only and can be mechanically adjusted easily depending on different bottle dimensions Gripper Rinser Bottle Rinser provides an excellent way to fully clean the bottles The bottle rinser is u ...

GeneralUniversal Turning Machines; Control: Siemens 840D SL Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTurning diameter200 mmTransverse stroke160 mmLongitudinal stroke450 mmClamping chuck diameter max.210 mmMain drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore68 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist extra ...

Control model: T - I Distance between Centres: 3000mm Swing Over Bed: 840mm Tool Turret Vertical: 8 Tool Turret Horizontal on Saddle: 4 Diameter Forkardt Chuck: 610mm (3) x Fixed Steadies up to: 430mm Powered Tailstock Rear Swarf Conveyor Hydraulic Pack Spindle Motor and Transformer Machine photos : workdrive.zohoexternal.com/external/095d10894a930f82961d3848e923ca59ea 41ff8cb0da13021715cab758adfb2b

turning diameter: 290 mm turning length: 310 mm control: Mazatrol Smooth C swing diameter: 580 mm bar material dia.: 45 mm main spindle speeds:: 5000 U/min main drive motor: 7,5 / 11 kW Torque: 95,5 Nm disc turret: 12 fach travel -x axis: 195 mm travel -z axis: 325 mm traversing speed: 30 m/min tailstock taper MT: MT 4 total power requirement: 26,65 KVA weight of the machine ca.: - t dimensions of the machine ca.: 1,9 x 1,6 x 1,7 m - CNC control Mazatrol Smooth C - Tool turret 12-position - center Tooleye - Tailstock MT4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Sinumerik 810D CNC control 12-fold turret head (VDI 30 taper) main spindle sub spindle C-axis Y-axis driven tools coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser über Bett / max rotary diameter over bed 600 mm max. Umlaufdurchmesser über Schlitten / max. rotary diameter over sledge 360 mm max. Drehdurchmesser / max. turning diameter 420 mm max. Drehlänge / max. turning lenght 600 mm Abstand zwischen den Spindeln / distance between spindles 760 mm Planweg (x) / cross way (x) 210 mm Längsweg (z) / longitudinal way (z) 610 mm max. Stangendurchmesser / max bar diameter 65 mm Drehzahlbereich / spindle speed 0-4200 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of dri ...

turning diameter: max. 300 mm max. workpiece length: 480 mm control: Sinumerik 840D Siemens greates pass round over bed: 430 mm Swing dia. over traverse guideway: 300 mm distance between spindles: 720 mm Main spindle:: turning speed range - main spindle: 0 - 6.300 min/-1 power capacity - main spindel: 8 / 13 kW max. Torque: 78 Nm spindle head: KK5 DIN 55026 spindle diameter in front bearing: 80 mm bar material dia.: max. 45 mm C-Axis: 0,001 ° max. chucking diameter: 160 mm Subspindle:: Spindle speed range subspindle: 0 - 6.300 min/-1 power capacity - Sub spindle: 7 / 10 kW max. Torque: 42 Nm spindle head: KK4 DIN 55026 spindle diameter in front bearing: 70 mm max. chucking diameter: 130 mm Traverses Subspindle: 510 mm axis stroke:: x-axis: 160 mm y-axis: +40 / -30 mm z-axis: 510 mm turret:: number of toolpositions: 12 pos. tool taper: VDI 25 Drill shank diameter: 25 mm Spindle speed ...

Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special equipment: Software update Turn-Plus rapid traverse X/Z: 10m/15m Spindle speed: 25-5000 rpm Turret: Sauter 12-position turret, no driven tools Chuck: Power chuck SMW Autoblock Spindle passage: 0 Turning diameter: approx. 200 mm Turning length: max. 635 mm Tailstock/quill: available and mounted Chip conveyor: Yes, mounted Maschinenmaße: 4527x1940x1730mm Total weight: 5140 kg (incl. chip conveyor)

TRAUB TND 400 CNC Lathe, used - machine no.: 192 - operating voltage: 380 V - frequency: 50 Hz - control voltage: 22 V - valve voltage: 24 V - coupling voltage: 24 V - total nominal current: 102 A - total connected load: 48 kW - read off operating hours: 48739 - control system: TRAUB SYSTEM TX 8F - spindle passage: 65 mm - clamping chuck diameter: 200/250 mm - turning diameter over cross slide: 240 mm - turning diameter over bed: 480/170 - turning length: 800 mm - tool holders in turret: 12 pieces for cylinder shaft 40 x 63 mm - slide travel cross: 220 mm - slide travel length: 850 mm - rapid traverse cross: 10000 mm/min - rapid traverse longitudinal: 20000 mm/min - speed at drive wheel: 4000 rpm - ttailstock quill diameter: 85 mm - quill stroke: 140 mm - holder MK5 - press force of quill at 20/60 bar: 3300 N/10000 N - the machine is equipped with one tailstock, ...

Codimag VIVIA 420 – letterpress printing with turret rewinder Year 2006 Working width: 420 mm 6x Letterpress 1x Flexo 7x UV (ACTUAL) 1x punch with GAP-Master (GAP-Master in 2022) renewed ▪ SERAME Turret Rewinder - finish directly inline

Description: Fabrication number: R3GL9012 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 27 A Control unit: FANUC SERIES 21-T Turning length: approx. 500 mm Travel distances: Z: approx. 300 mm X: approx. 300 mm Incl. 10-position tool turret Attention: the tool holders in the tool turret are not included in the scope of delivery Tool holder: VDI 30 Incl. bar loader from the manufacturer KUPA Type: 42R weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,900 mm

Key data: 430 mm, 744 mm

Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...

Key data: 300 mm, 550 mm

Stock-No. 1105-03990 Type of machine CNC Turning- and Milling Center Make HARDINGE Type QUEST 6/42 Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details turning diameter 200 mm turning length 555 mm Control Fanuc 16 IT Spindle Bore Diameter 65 / 42 mm number of controlled axis 8 turning speed range 25 - 6000 rpm power requirement 18+18 kW rapid speed 20/30 m/min number of tapers in turret head 10+10 number of driven tools in turret 10+10 Spindle speed of driven tools 40 - 4200 rpm Spindelpower on driven tool 7 kW tail stock sub-spindle Additional information CNC-Lathe with driven tools,c axis , sub-spindle - Chipconveyor - - some toolholders live and fixed vdi 30 - Programmable Partscatcher CNC Fanuc 16 IT

The machine is in good technical condition, after prior agreement it is possible to test it. spindle drilling through draw tube 73 mm, feed 250 mm, workpiece remover /slide/, chip collector, turret head 12 tools, - revolving diameter above bed 762 mm - maximum cutting diameter 432 mm - distance between tips 610 mm - maximum cutting length 864 mm - rod capacity 76 mm - spindle motor power 22 kW - turret 12 positions

AMADA VIPROS 255 (2001) punching machine Ready for transportation and installation Maintenance and disassembly carried out by AMADA technical service Hours: 31,000 Capacity: 200KN Travel method: X and Y axes move the sheet, C axis for Auto-Index, T axis for the turret Control method: X, Y,T & C simultaneously, 4 axes control Driving Motors: FANUC AC Servo (X,Y,T,C,) Maximum sheet size: 1270 mm (Y) x 1270 (X) mm With 1 reset: 1270 mm (Y) x 2540 mm (X) Maximum axle travel: 1270 mm (Y) x 1270 mm (X) Maximum axes speed: X + Y = 82 m/min Punching precision: +/- 0.07 mm Repeatability: +/- 0.03mm Turret rotation 30 rpm: Bi-directional Number of stations: 31 Auto-Index Number: 3 Maximum hole diameter: 88.9 mm Blows per minute: 1000 1mm steps. 520 8mm pitch. 340 25mm pitch. Maximum punching thickness: 6 mm. (9 mm. with special jaws) Maximum sheet weight: 110 Kgs.

Description: Machine number: 177055919 Control system: SIEMENS SINUMERIK 840 D Chuck diameter: max. 210 mm Turning diameter: 400 mm Workpiece length: 120 mm X-axis travel path: 1130 mm (total travel path) X-axis travel path (working path): 400 mm Z-axis travel path: 280 mm Rapid traverse X-axis: 60000 mm/min Rapid traverse Z-axis: 30000 mm/min Motor spindle: Spindle diameter in the front bearing: 90 mm Spindle speeds: Rotating spindle speed range infinitely variable: max. 6000 rpm Disk turret with holder for driven tools: 8 pieces Shank diameter: 40 mm Spindle speed: max. 4000 rpm Torque: max. 50 Nm Working range with vertical drilling spindles Number of drilling spindles: 3 Spindle speed: max. 5000 rpm Drive power: 16 kW Torque: max. 83 Nm Incl. 8-station tool turret and a power chuck (diameter: approx. 250 mm) from the manufacturer SMW Incl. conveyor station from the manufacturer SCHNA ...

turning length: 600 mm max. turning diameter: 320 mm swing diameter above cross guideway: 365 mm control: CNC Pilot 4290 Heidenhain Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 28 / 21 kW max. Torque: 320 / 240 Nm spindle nose: 170h5 chucking diameter: 215 mm spindle diameter in front bearing: 130 mm spindle bore: 87 mm max. bar capacity: 65 mm c-axis: turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Driven Tool Stations:: Number of driven toolspositions: 12 pos. tool spindle speed range: max. 4.500 min/-1 power capacity driven tool-stations: 3,1 kW max. Torque: 10 Nm axis stroke:: x-travel: 250 mm z-travel: 635 mm Tailstock:: tailstock: 580 mm taper of center: MK 4 diameter of quill: 120 mm quill stroke: 150 mm feeds:: rapid traverse: X: 24 / Z: 30 m/min total power requirement: 44 kVA weight of the machine ca.: 5 ...

turning length: 1.000 mm swing diameter max. over bed cover: 600 mm swing diameter above cross guideway: 420 mm control: Eltropilot Heidenhain travel -x axis: 275 mm travel -z axis: 1.065 mm Main spindle:: turning speed range - main spindle: 16 - 3.200 min/-1 power capacity - main spindel: 27 kW max. Torque: 800 Nm spindle diameter in front bearing: 120 mm spindle bore: 85 mm chucking diameter: 260 mm spindle head: 220H5 turret:: number of toolpositions: 12 pos. Shank diameter: 40 mm turret change time: 0,8 sec. Tailstock:: diameter of quill: 100 mm quill stroke: 120 mm taper of center: MK 5 pressure center sleeve: max. 950 daN feeds:: rapid traverse: X: 10 / Z: 15 m/min Feed force: X: 500 / Z: 1.000 daN total power requirement: 52 kVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: 5,5 x 2,5 x 2,1 m Documents: Chip conveyor: Coolantsystem: Tailstock: hydraulic sy ...

Used Capsuling Machine Nortan UNICAP 35 The unicap aurora model guarantees maximum production for any type of capsule applied as in addition to the single cap distribution a 3 4 head turret is installed which is able to obtain the best smoothing quality without decreasing the production speed of the machine The monoblock is therefore composed of Single cap vending machine suitable for shrink capsules polylaminate in tin and aluminum and sparkling wine for productions from a minimum of 900 B H to a maximum of 3 500 B H Very simple in mechanical construction and in its maintenance being all its mechanical parts in motion mounted on sealed bearings 3 or 4 heads turret in the snare only sparkling only solution or in the snare sparkling wine combination Frame completely covered in stainless steel gearmotor with inverter electrical panel and safety guards in stainless steel all protected and e ...

Tenoning spindle: 1 0 Number of milling agregates: 5 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus # 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle spee ...

turning diameter: 175 mm turning length: 186 mm control: Sinumerik 840 D Siemens swing diameter over slide rest: 185 mm max. bar capacity: 65 mm Spindle left Unit: spindle nose: DIN 55 026 KK6 spindle bearing diameter: 100 mm spindle bore: 73 mm bar diameter: 65 mm chucking diameter: 175 mm turning speed range - spindle: max. 4.500 U/min drive capacity - spindle motor: 12 / 15 kW max. Torque: 193 Nm Spindle right Unit: spindle nose: DIN 55 026 KK6 spindle bearing diameter: 100 mm max. chucking diameter: 175 mm turning speed range - spindle: max. 6.500 U/min drive capacity - spindle motor: 9 / 11 kW max. Torque: 140 Nm Number of Turret: 2 pos Traverse X-Axis 1: 235 Traverse Z-Axis 1: 270 Traverse X-Axis 2: 235 mm Traverse Z-Axis 2: 680 rapid traverse X-axis: 24 m/min rapid traverse Z-axis: 24 m/min feed power: X = 7.000 N feed power: Z = 7.000 N numbers of turret head positions: 2 x 12  ...

Description: Circulation diameter over bed 923.8 mm Standard turning diameter 275 mm Max. bar diameter ,80 mm Travel of the 2nd headstock 1284 mm Spindle bearing inner diameter 140/85 mm Shaft height for square tool 25 mm Shaft diameter for boring bar 50/32 mm Tool shank diameter for tool holder ,26 mm Turret indexing time 0.25 s Max. speed of the driven tools 6000 rpm rapid traverse X and Z 30 m/min, B 20 m/min, Y 10 m/min, C 400 rpm With collet chuck, tailstock, tools on the tool turret, chip conveyor, 2 foot switches , Bar loader KURT BREUNING 80.1-3000, year 2010, machine number 1500003 Attention: technical data without guarantee turning diameter: 356 mm, Drehlänge: 1,298 mm, serial number: NL 251 HA 3894, turning diameter over slide: 755 mm, x-motion: 260 mm, y-motion: 100 mm, z-motion: 1,345 mm, C-axis simultaneously controllable: Yes, Integrated C-axis: ...

The machine is like new. It has only a few hundred hours of operation. Regularly serviced. A full VAT invoice is issued for the machine. Basic equipment: • • Rigid, closed O-type body guaranteeing accurate tool alignment • • Impact pressure 170 kN • • Fast servo-electric ram drive system • • 2 pcs. manually set sheet clamps with a pneumatic closing system and sheet sensors • • Measuring bar for manual setting clamps • • Closing clamps using a foot switch • • Quick drive system for rotary stations Sheet size X x Y, max. 2.530 mm x 1.270 mm Sheet size X x Y, min. 300 mm x 100 mm Sheet weight max. 1) 200 kg Travel length in the X axis 2.584 mm (X-42…X2542) X-axis travel speed, max. 90 m/min Travel length in the Y axis 1,317 mm (Y-25…Y1292) Travel speed in the Y axis, max. 60 m/min Cross speed, max. 108 m/min Impact speed. 2) Marking 1800 ...

Description: Fabrication number: S4C141101 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. part length: 480 mm Max. bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. Chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping ...

Description: Fabrication number: S4C132091 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. Part length: 480 mm Max. Bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. Chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping ...

Description: Fabrication number: S4AC0301 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. part length: 480 mm Max. bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping  ...

Key data: 490 mm, 515 mm

Machine Details Stock-No. 1105-04004 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type NL 1500 SY Year of manufacture 2005 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex Warehouse Technical details turning diameter 490 mm turning length 515 mm control MSX-850 max. bar capacity 52 mm Travel -X Axis 280 mm Travel -Z Axis 490 mm max. speed main spindle 6000 min-1 spindle taper 1 A2-6 C - Axis 0.001° Spindle Bearing Diameter 110/75 mm No. of tools in turret 1 12 Shaft Cross Cut 25 x 25 mm Shank diameter 50 / 32 mm turret change time 0.25 s Max. Spindle Speed Driven Tools 6000 min-1 rapid power traverse in X-and Z direction 30 m/min Rapids C - Axes 400 min -1 drive capacity - spindle motor 18.5 kW power capacity - driven tools 5.5 kW swing diameter over face slide 278 mm great ...

This 5-Axis lathe was manufactured in 2002. With a turning length of 508 mm and a 15 kW main engine, its equipped for precision machining. The 210 mm chuck and 10-position tool turret ensure versatility. Featuring a rigid tapping system and VDI turret, its ideal for varied machining tasks. Boasting a spindle speed of 4,000 rpm, it delivers efficiency. Complete with European package additions like USB port and chip conveyor, buy this HAAS SL-20HE lathe for a reliable machining solution. Contact us for further information.

Description: X1 axis travel: 250 mm (9.8 inches) Z1 axis travel: 1050 mm (41.3 inches) X2 axis travel: 150 mm (5.9 inches) Z2 axis travel: 1030 mm (40.5 inches) Rapid traverse X-axis 20 m/min (787 inches/min) Z-axis rapid traverse: 24 m/min (945 in/min) Max. turning diameter (upper turret)⌀370 mm (14.6 in) Max. turning diameter (lower turret)⌀240 mm (9.4 in) Max. turning length 1000 mm (39.4 inches) Through hole diameter ⌀68 mm (2.7 inches) Lining size: 8 inches Speed ​​5000 rpm Power18.5 kW (25 HP) Torque 476 Nm (351 ft-lbs) tool shank BMT-KEY tower stations (top) 12 tower stations (bottom) 8 Boring bar diameter⌀40 mm (1.5 inch) Drehlänge: 1,000 mm, x-motion: 250 mm, total power requirement: 18,5 kW, weight approx.: 8,400 kg, Approx. Onsite Dimension. (l x w x h): 3,900 x 2,144 x 1,930 mm

Description: Swing diameter max. 300 mm Travel - X 280 mm Feed rate X - axis 0.1 - 30,000 mm/min Rapid traverse X - axis 30 m/min Travel - Z 1,150 mm Feed Z - axis 0.1 - 60,000 mm / min. Rapid traverse Z - axis 60 m/min Spindle bearing diameter 90 mm Spindle head according to DIN 55026 - size A6 Speed 1 - 5.000 rpm Tool turret - number of stations 12 Tool holder Capto C4 Total power requirement 45 kW Description: CNC lathe with SIEMENS SINUMERIK 840D control, screw conveyor with chip breaker and return pump station, NC steady rest SMW-SLU-1-OLD Ø10-70mm, 12-position tool turret SAUTER 0.5.440.220, NC tailstock, Artis breakage monitoring, pick-up loading via pallet belt. Without coolant system, was connected to central supply. The machine can be demonstrated under power. turning diameter: 250 mm, Drehlänge: 400 mm, x-motion: 280 mm, z-motion: 1,150 mm, control: Siemens ...

Key data: 725 mm, 2120 mm, 2000 1/min

For sale: Robust Hyundai-Kia CNC lathe type SKT-400LC. This high-performance machine is equipped with flat guides in the Z and X axes. The chuck diameter is 381 mm (15 inches) with a bar capacity of 117 mm. The main motor power on the spindle is 37/30 kW. in combination with a 2-speed gearbox. The turning diameter above the bed is 725 mm, the turning diameter above the cross slide is 535 mm, and the maximum turning diameter is 630 mm. The maximum turning length is 2,120 mm. The turret is a 10-position turret with a so-called block mount. . The machine's own weight is just under 11,000 kg. This is a 2-axis CNC lathe available at short notice, subject to intermediate sales.

Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed ​​driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed ​​spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed ​​spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Manufacturer: KITA ...

turning diameter:630 mm turning length:2850 mm control:Fanuc 0i-mate MGI swing diameter over slide rest:350 mm bed width:550 mm spindle nose:D11/1:20 spindle bore:104 mm spindle speeds::17-1000 U/min transmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/min tailstock quill taper MT:5 Morse Quill travel:200 mm diameter of quill:100 mm workpiece accuracy:6-7 ITF x-travel:320 mm z travel:3000 mm chuck size:315 mm dimensions:5200 x 1900 x 1900 mm :6 t power capacity:11 kW CNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 steady rest:2 Stück frequency control main spindel engine:11 kW turret:8-fach Flat Bed CNC Lathe Flat Bed CNC Lathe, CAK63/80 Series CAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petr ...

turning diameter:220 mm turning length:200 mm control:Fanuc 0i-TF Manual Guide bar material dia.:26 mm spindle speeds:6000 1/min. spindle drive:7,5/11 kW rapid speed:20 m/min travel -x axis:155 mm travel - z:200 mm CNC controller:Fanuc 0i-TF Manual Guide (Werkstattprogrammierung) + 10,4" LCD turret:12 (hydr.) fach hydraulic unit:mit Lufkühlung hollow chuck:hydraulisch, 150 mm tool holder:4 Stück Innen (Ø32mm), 6 Stück Außen, 2 Stück Plan bar loader:optional Tool setter:manuel soft jaw:1 Satz BORING SLEEVES :6 Stk. (Durchm. 8, 10, 12, 16, 20, 25 mm) Contains: 1.Control system Fanuc 0i-TD (8.4"COLOR LCD) 2.Spindle motor 7.5/11KW Fanuc â8/8000i 3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm) 4.X/Z-Axis stroke 155/220 mm 5.X/Z Axis rapid traverse 20/20 m/min 6.Hyd.hollow chuck 6" x 3 jaws 7.Hydraulic turret system 12 stations 8.Hyd. Unit for chuck with air cooler 9.Without tails ...

turning diameter:300 mm turning length:600 mm control:Fanuc 0i TD swing diameter over bed slide:320 mm swing over bed:520 mm bar material dia.:64 mm spindle speeds:4500 1/min. spindle drive:11/15 kW turret:12-fach Tool setter:manuell brand new CNC turning center with Contains: 1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY) 2 X/Z AXIS STROKE 170/600 MM 3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN 4 SPINDLE MOTOR 11/15 KW 5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE) 6 SPINDLE BEARING DIA. F 120 MM 7 BAR CAPACITY DIA. F 64 MM 8 HYD. HOLLOW CHUCK 10" X 3 JAWS 9 HYD. UNIT FOR CHUCK WITH AIR COOLER 10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS 11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM 12 ELECTRICAL CABINET WITH HEAT EXCHANGER 13 STANDARD SPLASH GUARD 14 COOLANT UNIT 15 TRANSFORMER (POWER SOURCE 380V) 16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 17 MACHINE COLOR TONGTAI WHITE/DRAK GRE ...

:GN-1000 | GN-1250 | GN-1500 | GN-1750 turning diameter:1000|1250|1500|1750 mm turning length:1500/2000/3000/4000/5000/6000/8000 mm control:Siemens 828D turning diameter over slide:830|1080|1330|1580 mm bed width:820 mm spindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mm spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min x-travel:750 mm z-travel:2000/3000/4000/5000/6000/8000 mm rapid power traverse in X-and Z direction:6 m/min servo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mm tailstock quill diameter:200 (295 opt.) mm taper in tailstock:6 MK tool turret:8/10/12 fach tool holder -shaft diameter:32 (40 opt.) mm main drive motor:30 (37 opt.) kW weight of the machine ca.:9/10/11/12/13 t positioning accuracy:+0.01 / 300 mm repeating accuracy:+0,005 mm machine length:5000/6000/7000/8000/900 ...

turning diameter:2000 mm turning length:1500/2000/3000/4000/5000/6000/8000 mm control:Siemens 828D turning diameter over slide:1640 mm bed width:820 mm spindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mm spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min x-travel:750 mm z-travel:2000/3000/4000/5000/6000/8000 mm rapid power traverse in X-and Z direction:6 m/min servo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mm tailstock quill diameter:200 (295 opt.) mm taper in tailstock:6 MK tool turret:8/10/12 fach tool holder -shaft diameter:32 (40 opt.) mm main drive motor:30 (37 opt.) kW weight of the machine ca.:9/10/11/12/13 t positioning accuracy:+0.01 / 300 mm repeating accuracy:+0,005 mm machine length:5000/6000/7000/8000/9000/10000 mm machine width/height:2500 x 2400 mm max. workpiece weight ...

:LL 550 | LL 750 | LL950 turning diameter:550 | 750 | 950 mm turning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mm control:Siemens/Fanuc/Fagor center height over bed:475|575|675 mm bed width:990 mm spindle bore:153/230/305/405 mm spindle nose:A2-11/A2-15/A2-20/A2-28 spindle speed:9-600/9-500/7-400/5-250 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:32 (40 opt.) mm tailstock quill diameter:165|200 mm tailstock quill adjustment:250 mm taper in tailstock:6 MK tailstock movement:über Motor travel -x axis:370 | 480 mm travel - z:= Spitzenweite mm servo motor X-axis:3 | 4 kw servo motor Z-axis:4 | 7 kw rapid power traverse in X-and Z direction:5/4 m/min hydraulic motor:2,2 (2,9 opt.) kW coolant pump drive:3 (15 opt.) | 15 bar weight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/2 ...

:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mm turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm control:Siemens/Fanuc/Fagor center height over bed:705|805|905 mm width of cross cariage:600 mm bed width:1370 mm spindle bore:200 mm spindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/min spindle taper:6 MK spindle drive:22/26 (30/37 opt.) kW tool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mm tailstock quill diameter:300 mm tailstock quill adjustment:250 mm taper in tailstock:7 MK tailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mm travel - z:= Spitzenweite mm servo motor X-axis:4 kw servo motor Z-axis:7 kw rapid power traverse in X-and Z direction:5 m/min hydraulic motor:1,4 (ab 9m: 3,6) kW coolant pump drive:15 bar weight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20 ...

turning diameter:340 mm turning length:480 mm weight of the machine ca.:5,2 t transport dimensions LxWxH:2200 x 1720 x 2200 m dist. between centers:500 mm spindle diameter:100 mm spindle bore:62 mm no. of tools in turret 1:12 c-axis:360 grad 4-axis Okuma LB 300 built in 2004 with a large turret type V12 for 12 x L or M tools and a hydraulic tailstock.

turning diameter:620 mm turning length:2.000 mm turret (x-stations):8 tool taper:VDI 40 turning diameter over bed slide:415 mm control:8055 TC FAGOR spindle bore:80 mm rapid power traverse in X-and Z direction:10 m/min speeds:0-650 / 650-2.500 1/min total power requirement:28 kVA weight of the machine ca.:3,6 t dimensions of the machine ca.:4,6 x 2 x 1,8 m teach-in lathe with tailstock MT 5, 8-hole turret, 3 jaw-chuck

turning diameter:650 mm turning length:2000 mm face slide travel:445 mm turning diameter over slide:260 mm turning speeds:1-2.000 1/min transmission ratio:2 spindle:33 / 22 kW spindle bore:130 mm quill stroke:200 mm turret head:12 Pos. workpiece weight max.:2.560 kg total power requirement:38 kW weight of the machine ca.:6 t dimensions of the machine ca.:5 x 2,6 x 1,9 m teach in lathe, SAUTER-turret with 12 pos. (6 for live tools), VDI 40, SMW 3-jaw-chuck dia 400mm, tailstock, steady 100-250mm, C-axis, chipconveyor, free contour-programming, memory 256kB, accessories no hour meter, max. 1 shift

number of spindles:8 spindle passage:67 mm Machine type: CNC controlled multi spindle automatic lathe Manufacturer: MORI SAY Type: TMZ 8/67 CNC Yob: 2018 Double four-spindle machine, eight-spindle machine with spindles-drum locking by means of 3 HIRTH-type frontal rings and spindles set for HAINBUCH BZI SK80 collets equipped with twin CNC systems model SINUMERIK SOLUTION LINE 840D SL for the control of: indexing speed of the spindles drum with bar feed at station 1 speed and orientation of each of 8 main spindles speed and position of each of 8 frontal slides speed and position of each of 7 compound slides speed and position of the cut-off slide at station 8 for a total of 30 CNC-controlled axes, with the possibility of requesting further upgrades from the manufacturer. Machine equipped with the following optional items: BAR LOADER automatic bar feeder model PB 60 by CUCCHI BLT for bars  ...

CONTROLS   CNC controls FANUC 310I-A WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 180 mm   workpiece weight between centers (max): 25 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 400 mm   grinding length: 1000 mm TAILSTOCK   distance betw. centers (max): 1000 mm   taper: MK 4   Z-axis travel: 1600 mm SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 220 mm   Z-axis travel: 1600 mm   tilting range (B-direction) min: 0 °   rotating range B-axis up to: 25 °   drive power: 6.8 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 400 mm   borehole: diameter: 127 mm ELECTRICAL SPECIFICATIONS   mains power supply: 45 kVA   mains voltage: 400 V   mains frequ ...

Container filling system Turret with horizontal Rotary and longitudinal moving conveyor on sturdy galvanized frame, swivel bearings. Incl. support climbing belt and tied up to the automatic filling of three large containers. PLC control Distribution belt gear motor 2 .2kW / conveyor width 900 mm Achabstand 5500 mm Drive rotation 0, 6kW Rotation drive +/-90 ° Climbing belt conveyor width 600 mm / distance 4000 mm / drive 1, 1kW High belt conveyors conveyor width 600 mm / distance 4700 mm / drive 1, 1kW Colour RAL 9006 / White aluminium System now available Price and further details on request

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg