turret cnc used for sale

Key data: 350 mm, 250 mm

FANUC 18i-TB control, double spindle, travel X/Y/Z = 160/+40/-30/510 mm, 12-cavity tool change turret with driven tools VDI 25, speed max. 6,000 rpm, material ejection, remote control, TOP etl 8-50 bar feeder in front, year 2011, S/N 92230, L = 5,000 mm, RITTAL control cabinet, remote control

FANUC 18i-TF control, double spindle, travel X/Y/Z = 160/+40/-30/510 mm, 12-cavity tool change turret with driven tools VDI 25, speed max. 6,000 rpm, material ejection, remote control, TOP etl 8-50 bar feeder in front, BJ 2018, S/N 95692, L = 5,000 mm, RITTAL control cabinet, remote control

Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible.

X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible.

Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 5kVA, equipment: rotary spindle, controlled C-axis, CNC conversational control system, Handy Genius remote hand-held control unit, tool holder: Erowa ITS 007523 quick-clamping chuck, 16-position electrode changer, extraction unit, C-module Z+K, automatic CO₂ fire extinguishing system, paper cartridge filter, electronically controlled heat exchanger, high-pressure flushing system (defective), rotary head up to 750rpm and tube guide. An on-site inspection is possible.

Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 8.3kVA, rated current: 12A, weight: 3t, equipment: rotary quill, controlled C-axis, CNC conversational control system with 4 axes, hand-held control unit, tool holder: Erowa ITS quick-clamping chuck, 20-position electrode changer, paper cartridge filter. An on-site inspection is possible.

turning diameter: 465 mm turning length: 1050 mm control: Heidenhain x-axis: 300 mm total power requirement: kW weight of the machine ca.: 7600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 640 mm swing diameter over face slide: 435 mm control: Siemens SINUMERIK 810D pl turning speed range: 3 - 2.500 U/min centre distance: 1.500 mm spindle bore: 70 mm spindle diameter in front bearing: 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition and can be inspected under power at any time. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Lathe TAKISAWA TMM 250 M1 CNC Model Fanuc Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 € : 600 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 510 mm : 700 mm : hydraulisch : 80 mm/s : 6,5 mm/s : 80 mm/s : 750 mm : 280 l : 2 x 11 kW kW : 7600 mm : 2650 mm : 3950 mm : 52500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112813 € : 2132.17 € : 320 to : 3050 mm : Y1 / Y2 / X Achse : 365 mm : 2600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 37 kW : 4300 mm : 1820 mm : 3330 mm : 17100 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63320 € : 1196.75 € : 100 to : 2550 mm : Y1 / Y2 / X Achse : 265 mm : 2200 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 11 kW : 3800 mm : 1670 mm : 2850 mm : 7800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...

CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of Make: 2007 Internal machine no. 60 Travels: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360° W-axis: 1,550 mm Max. turning diameter: 710 mm Mount: HSK 63 Total tool stations: 40 locations Spindle speed: 38 – 3,800 rpm Equipment / Accessories - Chip conveyors - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper tape filter system 500l - One Touch IGF

CNC turning and milling center Okuma Multus B400 1SC-1500 Control: OSP-P200L Year of manufacture: 11/2010 Internal machine no. 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40-fold Equipment: - Chip conveyors - 3-jaw chuck SMW KNCS-N-340-117 - Paper belt filter system ISF 540/6670 - One Touch IGF - Tailstock - Touchsetter

Key data: 120 t, 3110 mm

Inv. Num. : 9174 Type: TruBend 3120 Producer: Trumpf Created: 2007 Parameters: Compressive force: 120 t Maximum bending length: 3110 mm Distance between frame walls: 2690 mm Machine height: 2330 mm Machine length: 3600 mm Machine width: 1750 mm Machine weight: 8300 kg

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...

HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy-duty portal design with fixed crossrail, suitable for machining large and heavy workpieces. Large working area with travels of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A- and B-axis (swivel axes in the milling head) C-axis (360° rotation) Simultaneous 5-axis machining possible (with fork head) Milling heads: Straight milling head FK 120/340 90° angle head WFK 100/750M Fork head FK 100/2D Milling head magazine: 5 positions Automatic milling head change Additional equipment: Internal cooling (IKZ) approx. 7 bar Tool changer 32 positions (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool measuring system (laser) Chip conveyor Coolant system Adaptive feed ...

The machine was originally manufactured in collaboration between Waldrich Coburg and Waldrich Siegen as a heavy CNC gantry milling machine for the industrial large-part and heavy-duty machining sector. 63 kW milling and drilling unit NC universal milling head B and C axis Automatic tool changer 60-slot tool magazine ISO50 / SK50 IKZ Enclosed work area Heavy industrial construction Electronic handwheel Siemens Sinumerik 840D Heavy CNC gantry milling machine from Waldrich Siegen for machining large and heavy workpieces. The machine comes from an ongoing industrial project / plant closure and is already dismantled or prepared for transport. Particularly interesting for: Heavy-duty machining Large-part machining Mechanical and plant engineering Steel construction Tool and mold making Important note: The machine must be picked up from Rüsselsheim by the end/mid-June at the latest due to sho ...

KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces. Travel paths of 4,000 x 2,700 x 1,200 mm and a large worktable of approximately 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of large-volume components. The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled). Hirth gearing ensures precise angle settings. Powerful main spindle drive with approximately 30 kW. Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm. Additional equipment includes a 60-tool changer (KWE60), chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication. Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per axis unders ...

DMG DECKEL MAHO DMF 180 travelling column machining center, equipped with Heidenhain iTNC 530 control. Machine equipped with 40 bar through-spindle coolant (IKZ), 60-position tool magazine (chain type with double gripper), chip conveyor, electronic handwheel, air blast through spindle, M&H infrared probe and full enclosure. Table size approx. 2,100 x 700 mm. Operating hours: control ON approx. 63,700 h, machine ON approx. 22,500 h, cutting time approx. 7,750 h

Mikron HSM 400 is a high-precision, high-speed machining center  STEP TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Spindle hours: 26897 h Manufacturer: Step-Tec AG (Switzerland) Spindle type: HVC140-SB-10-15/42-3F-HSK-E40 Tool interface: HSK-E40 Maximum spindle speed: 42,000 rpm Power: 13 kW (40% duty cycle), 10 kW (100% duty cycle) Torque: 4.25 Nm (40% duty cycle), 3.2 Nm (100% duty cycle) Lubrication: oil-air lubrication system Axis Drives and Dynamics Drive system: AC servo motors with ball screw drives Feed rate (X/Y/Z): 0 – 40 m/min Acceleration (X/Y/Z): 1 g (10 m/s²) Rotary Axis Performance B-axis speed: up to 54,000 °/min C-axis speed: up to 90,000 °/min Tool System Tool interface: HSK-E40 Tool magazine capacities: 18 / 36 / 68 tools depending on configuration Tool change time: approx. 10 seconds Chip-to-chip time: approx. 12.5 seconds Pallet and Clamping System  ...

Hermle C 600 V vertical CNC machining centre, manufactured in 2002, with a Heidenhain TNC 430 control system. The machine has travel ranges of approx. 600 x 450 x 450 mm and is equipped with an SK40 spindle and a tool changer. A chip conveyor and a complete coolant system are included, meaning the machine is ready for immediate use. The machine is in used but fully functional condition and can be demonstrated whilst powered up.

Heavy CNC bed milling machine by Droop & Rein in solid cast design for machining large and heavy workpieces. The machine is equipped with a Heidenhain TNC 430 control and was overhauled in 2002. Equipped with a powerful 30 kW milling spindle, SK50 holder, and a swiveling milling head (±45°) for flexible machining operations. The robust construction ensures high stability and precision even in demanding machining tasks. The machine is powered on and can be inspected at any time.

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: CHIRON Type: FZ 08 B/W Year of Make: 2000 Machine Type: CNC Vertical Machining Center Control: Siemens Sinumerik Operating voltage: 3/N/PE 400 V Frequency: 50/60 Hz Control voltage: 230/24 V Connected load: approx. 21 kVA Rated current: approx. 35 A Configuration Double clamping system / pendulum operation 2 clamping stations NC sub-unit Peiseler AWUP 100 Automatic tool changer Cooling lubricant system Extraction system Full fairing Compact design for series production Auction-ID: A7-47277-9

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production Auction-ID: A7-47277-6

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 SC3 Year of Make: 2007 Serial Number: 1820027 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Configuration Siemens CNC control Automatic tool changer Double station / multi-sided machining Chip conveyor Cooling lubricant system Full fairing Control cabinet Auction-ID: A7-47277-2

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet Auction-ID: A7-47277-7

Overhauled spindle Chiron FZ15KW HIGHSPEED CNC SIEMENS 840D X, Y, Z 550 x 400 x 425 Tools 48, HSK A63 DIN 69893 Spindle 12.000 U/min Rapids 60 m/min Pallet 2 x 660 x 400 mm Year 2001 Coolant through spindle Steel: max 36 mm / M24 Weight 8200 kgs Overhauled spindle. This machine can be inspected and tested in our warehouse. Mimu machine tools (Italy)

Serial number: 24550616 Punching force: 200 kN Connection: 11 kVA Table dimensions: 2450 x 1200 mm including accessories such as various punches and punching tools Reference: CES - Lot 107 Auction-ID: A7-46763-333

This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine.

Automatic stirrup bending machine, 4 payoffs, double bending 8-12mm, single bending 8-16 mm, working hours 1322, very good condition Auction-ID: A7-47311-2

Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Tool holder: probably SK 30 Max. tool clamping length: 35 mm Table dimensions: 420 x 120 mm with 2 grooves and a special EMCO vice Jaw width: 60 mm Travel - X: approx. 190 mm, Y: approx. 140 mm, Z: approx. 260 mm incl. matching mobile workbench with various suitable contents incl. 7-fold tool changer, collets and various matching tool holders Note: An identical and completely identical machine will be delivered and not exactly the one shown in the photos. Auction-ID: A7-46763-337

Kaukan CNC machining center (L&W Machine Tools) model Cinch Mill30SB. Manufactured in 2006 and equipped with Fagor 8040-M CNC control. Technical characteristics: • Travels (X/Y/Z): 760 x 510 x 510 mm • Worktable: 900 x 510 mm • Maximum spindle speed: 6,000 rpm • ISO 40 Cone • High-precision linear guides • 18-tool autoloader • Power supply: 380 V • Installed power: 20 kVA • Machine weight: 4,800 kg The machine is supplied with various tool holders and accessories visible in the photographs. Very good general condition. Suitable for precision machining work and manufacturing of metal components. Sold in the condition it is in. Auction-ID: A7-47240-6

Automatic stirrup bending machine, 1 payoff, double bending 8-12mm, single bending 8-14 mm Auction-ID: A7-47311-4

Serial Number: 324 Operating Voltage: 380 V Frequency: 50 Hz Connection: 20 kVA Control: MORIC-T5F Circumference Diameter over Bed: 450 mm Circumnavigation Diameter over Turret: 300 mm Center Width: 595 mm Standard Diameter: 160 mm Max. Turning Length: 525 mm Travel X-Axis: 222 mm Travel Z-Axis: 560 mm Spindle Speed: from 50 to 5000 rpm Spindle Bore: 52 mm Front Bearing Inner Diameter: 90 mm Number of Tools: 12 max. 6 stations for driven tools Shaft cross-section of the lathe bits: 20 mm Shaft diameter for boring rods: max. 32 mm Spindle speed of the driven tools: 100 - 2000 rpm Rapid traverse X-axis: 12,000 mm/min Rapid traverse Z-axis: 15,000 mm/min Feed speed in X-axis: 0.00001 to 250 mm/min Z-axis: 0.00001 to 350 mm/min Tipping feed speed X- and Z-axis: 1260 mm Tailstock Travel: 450 mm quill diameter: 75 mm quill travel: 80 mm the machine is equipped with a tailstock, as well as a 12 ...

Machine number: KMM526 1506 Operating voltage: 400 V Frequency: 50 Hz Rated current: 45 A Control: FANUC SERIES 18i-MB 5 Table dimensions: 1500 x 470 m with three grooves Attention: without the clamping devices shown in the photos incl. 4th axis Travel X-axis: 1000 mm Travel Y-axis: 400 mm Travel Z-axis: 360 mm Projection: 350 mm Working spindle Spindle bearing diameter: 65 mm Tool holder: SK 40 Spindle speed: from 36 to 12000 rpm incl. 42-fold tool changer Max. tool diameter: 125 mm Max. tool length: 250 mm Feed in X/Y/Z axis: 1 - 10000 mm/min Rapid traverse in X/Y/Z axis: 45 m/min incl. chip conveyor and coolant system Reference: Elos - Lot 1 Auction-ID: A7-46763-320

Rapid traverses: X and Y axis: 100%: 4 m/min 50%: 6 m/min Z axis (rotary table): 100% - 6 rpm 150% - 9 rpm Travel (from table center) Y-axis: + 110 mm, -95 mm Travel X-axis: +55 mm, -55 mm Largest bore Diameter: 220 mm Rotary table diameter: 400 mm Lifting speeds: 22, 45, 55, 75, 110, 150 Stroke length: 200 mm Stroke displacement: 250 mm Feed/stroke: 0.01 - 0.2 mm lifting stroke: max. 0.3 mm Reference: Hercegfi - Lot 2 Auction-ID: A7-46763-197

Machine number: 71401453 Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connection: 44 kVA Spindle hours read: 26350 Control: MILLPLUS Spindle speed: up to 12000 rpm Feed X/Y/Z axis: 20 - 15000 mm/min Rapid traverse X/Y/Z axis: 40 m/min Displacement measuring system Resolution X/Y/Z axis: 0.001 mm Input gauge X/Y/Z axis: 0.001 mm Position tolerance in X/Y/Z axis: 0.010 mm Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Tool holder: SK 40 incl. 60-fold tool changer Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage monitoring: 350 mm NC rotary table Clamping surface: 630 mm Diameter Distance between T-slots: 63 mm Number: 9 Centering bore: 50 mm Diameter Max. rotation of table top: 10.7 rpm Feed: 3600°/min Resolution of the measuring system: 0.001° incl. chip conveyor and cooling system Attention: the machine can be trans ...

Automatic stirrup bending machine, 1 payoff, double bending 8-12mm, single bending 8-14 mm Auction-ID: A7-47311-5

Serial number: 07510001241 operating hours read: 72,899 Spindle hours read: 39,361 Control: SIEMENS SINUMERIK 840 D Rotation diameter: 640 mm Turning diameter: max. 640 mm Turning diameter Sub-spindle: 400 mm Spindle distance: 1500 mm Turning length: 1185 mm Max. workpiece weight: 150 kg Slide path X1: 550 mm Slide path Y1: 180 mm Slide path Z1: 1185 mm Slide path B1: 240 ° Slide path X2: 180 mm Slide path Z2: 1050 mm Slide path Z3: 1150 mm Spindle speed range: 3200/4000 rpm Rapid traverse speed of slide 1 (X/Y/Z): 40/24/70 m/min Rapid traverse speed of slide 2 (X/Z): 24/36 m/min Rapid traverse speed of slide 3 (Z): 36 m/min Tool holder: HSK 63 Spindle speed: 12,000 rpm incl. the tool holders on the turret incl. bar feeder, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, Year of manufacture: 2008, Serial number: CNCDB-08.306, Weight: 1500 kg Number of tool positions in the chain magazi ...

Travis TR-2 CNC lathe manufactured in 2006. Equipped with Fagor 8055T CNC control, hydraulic plate and 8-position tool turret. Technical characteristics: • Distance between points: 1,850 mm • Flip on bed: 630 mm • Trolley tipping: 400 mm • Maximum spindle speed: 2,500 rpm • 300 mm hydraulic chuck • 8-position turret • Tailstock included • Centralized automatic lubrication system The machine is supplied with various tool holders, turning tools and accessories visible in the photographs. Suitable for precision turning work and general metal machining. Used status. Sold in the condition it is in. Auction-ID: A7-47240-5

Automatic straigntening, bending and cutting machine up to 16 mm, 5 payoffs Auction-ID: A7-47311-6

Serial number: 1537001259A Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Control: HEIDENHAIN TNC 620 Spindle speed: up to 12,000 rpm Max. spindle torque: 83 Nm Feed speed in X/YZ: up to 20,000 mm/min Rapid traverse in X/Y/Z: 30 m/min Setup operation in X/Y/Z: 20 - 2000 mm/min Travel X-axis: 635 mm Travel Y-axis: 510 mm travel distance Z-axis: 460 mm Displacement measuring system X/Y/Z: 1 μ Positioning uncertainty X/Y/Z: 6 μ Tool holder: SK 40 Table dimensions: 790 x 560 mm Spindle hours read with 5 grooves: approx. 5000 incl. 20-fold tool changer Attention: all tool holders located in the tool changer are included in the scope of delivery! Reference: Schönichen - Lot 47 Auction-ID: A7-46763-284

Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Turning length: approx. 300 mm Center height above bed: approx. 100 mm Travel X: approx. 100 mm, Z: approx. 200 mm The machine is equipped with a tailstock, a three-jaw chuck and a special tool turret including a mobile workbench and matching accessories Note: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos. Auction-ID: A7-46763-338

Pinnacle LV-126 CNC Vertical Machining Center. Year of manufacture: 2008. Equipped with Fagor 8055i PLUS-M CNC control and 24-position automatic tool changer. Technical Specifications: • Travels (X/Y/Z): 1300 x 610 x 610 mm • Table dimensions: 1440 x 610 mm • Maximum spindle speed: 8,000 rpm • Taper: ISO 40 • Automatic tool changer: 24 positions • Maximum tool weight: 8 kg • 45 mm Class P precision linear guides • Ball screws Ø40 mm, C3 accuracy grade • Number of axles: 3 • Machine weight: 6,800 kg Suitable for precision machining and general metal transformation work. Sold in the \"as is\" condition and without subsequent warranties. Include accessories visible in the photographs. Auction-ID: A7-47240-1

Machine number: 711194 Operating voltage: 400 V Frequency: 50/60 Hz Connection: 40 kVA Control: FANUC SERIES 18-M Spindle speed: 45 to 4500 rpm Spindle holder: BT 50 Front bearing diameter: 100 mm Travel X-axis: 1100 mm Travel Y-axis: 600 mm Travel Z-axis: 630 mm Distance between spindle nose and table center: 218 - 848 mm Distance between spindle center and stand: 650 mm Table dimensions: 1200 x 600 mm Table load: max. 1200 kg Grooves: 5 Groove size: 18 mm Distance: 100 mm Rapid traverse X/Y/Z: 16/16/15 m/min Feed speed: 1 - 5000 mm/min Tool magazine: 24 places Max. tool dimensions: Diameter 125 x 350 mm Max. tool weight: 15 kg Tool holder: SK 50 incl. dividing head (4th and 5th axis) from the manufacturer NIKKEN, with a three-jaw chuck, Diameter: 250 mm Reference: Hercegfi - Lot 29 Auction-ID: A7-46763-211

Max. deflection: 575 mm diameter Standard chuck size: 305 mm Distance between tips: 1527 mm Headstock center height: 310 mm Max. load capacity: Feed work: 250 kgf Top work: 1000 kgf Control: MAZATROL T PLUS Max. speed of KITAGAWA chuck: 3000 rpm With technical documentation as shown in the pictures Auction-ID: A7-46763-392

Travis MM-4 CNC Milling Machine. Year of manufacture: 2017. Equipped with Fagor 8055i CNC control and 8-position automatic tool changer. Technical Specifications: • Travels (X/Y/Z): 390 x 240 x 400 mm • Table dimensions: 810 x 250 mm • Maximum load on table: 80 kg • Maximum spindle speed: 10,000 rpm • Taper: BT40 • Pneumatic tool clamping • Automatic tool changer: 8 positions • Maximum tool diameter: 80 mm • Maximum tool height: 260 mm • Maximum tool weight: 7 kg • Voltage: 400 V • Installed power: 20 kVA • Machine weight: 1,300 kg • Serial Number: TW-193 Suitable for precision milling work, component fabrication and general metal machining. Sold in the \"as is\" condition and without subsequent warranties. Include accessories visible in the photographs. Auction-ID: A7-47240-4

Connection: 13 kW Control: HEIDENHAIN TNC 425 Table dimensions: 700 x 360 mm T-slots Number x width x distance: 3 x 18 x 110 mm Distance table to floor: 840 mm Max. table load capacity: 300 kg Travel X-axis: 960 mm Travel Y-axis: 380 mm Ball screw X and Y axis: 32 x 10 mm Pitch Diameter Distance table center to stand: min. 190 mm, max. 570 mm Spindle holder taper: ISO 40 Z-axis travel: 380 mm Spindle speed: 100 to 6000 rpm Rapid traverse: 15 m/min Positioning accuracy: +-0.01 mm Repeatability: +-0.005 mm Resolution: 0.001 mm incl. 16-fold tool changer Max. diameter for adjacent tools: 85 mm Max. diameter for free secondary positions: 135 m Max. tool length: 250 mm Permissible weight per tool: 6 kg max. total weight of the tools: 60 kg Attention: without the machine vise shown in the photos! Inkl. 3D touch probe Reference: Schönichen - Lot 23 Auction-ID: A7-46763-270

Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 35 A Control: SIEMENS SINUMERIK Grinding range: 600 x 350 x 375 mm Connection: 7 kW incl. clamping magnet Magnet dimensions: 600 x 350 mm Table dimensions: 820 x 350 mm Grinding wheel diameter: max. 300 mm incl. balancing device from the manufacturer MPM,Reference : Schönichen - Lot 61 Auction-ID: A7-46763-287