turret cnc used for sale

Automatic wheel balancer, CNC gantry loader, electric hoist, cutting speed regulator, hydraulic lifting wheel grinder, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Speed ​​255 r.p.m., Diamond dressing speed: 255 r.p.m., Control type ((cnc / manual): CNC, Cnc brand: SIEMENS, Cnc model: 840D, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 14.000 kg, Accessories included: Automatic wheel balancer, CNC gantry loader, ...

CNC cylindrical grinding machine Type: TOS BUA 63/3000 CNC Manufacturer: TOS Overhaul: 2020 Control: Siemens Sinumerik 840D Max. grinding diameter: 630 mm Max. grinding length: 3000 mm Max. workpiece weight: 1200 kg Grinding wheel dimensions: 750 × 100 × 305 mm Grinding motor power: 22 kW Machine weight: 12,700 kg Dimensions: 9900 × 2980 × 1875 mm Working spindle taper: Morse 6 Tailstock taper: Morse 6 Support lunettes Machine in good condition, fully functional Find more here - / Contact us at -

Haco ERMS 220 ton x 3100 mm CNC Capacity: 220 ton x 3100 mm Backgauge: CNC Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 18,7 kW Length: 3320 mm Depth: 2050 mm Height: 2800 mm Weight: 11,6 ton

Key data: 242 t

This is a 242 Ton x 12ft and deep 16" throat depth with 5 axis machine with auto crowning, a good variety of dies and punches including 2 bolsters and a nice 4way. Segment acute punches and dies also available with this machine. It is clean and fully operational. Machine is wired 208 3 phase.

pressure: 28.0 t chamfer lenght: 1050 mm distance between columns: 890 mm throat: 200 mm stroke: 200 mm dayligth: 325 mm back stop - adjustable: 500 mm working feed: 8.0 - 10.0 mm/sec return speed: 35.0 mm/sec back stop - adjustable: 0 - 370 mm Control: CYBELEC total power requirement: 4.75 KW weight: 3250 kg range L-W-H: 1595 x 1390 x 2020 mm Very good / well-maintained condition () new price in 2012 ... approx. 36.000 Euro special price on request The machine was in continuous use in a test area and as a result has only very few operating hours ! - in checked conditions - machinevideo - https://www.youtube.com/watch?v=2LsTlpSaEuE Equipment: - CNC electro-hydraulic press brake - CNC control CYBELEC ModEva 15PAC Large 15 touch display Workpiece creation simply by hand in 2D thanks to the TouchProfile function Intuitive and interactive programming Clearly arranged keyboard Clear  ...

Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement.

Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement.

Offer 26148 Technical data: - Pressure capacity 420 KN / 42 t - Stroke length 0 - 300 mm - Lifting speed 0 - 0.6 m/min - Tool height 200 mm - Bending performance - with prism MW 125 flat approx. 200 x 16 mm - with prism MW 240 flat approx. 200 x 24 mm - Tube bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - For angle programming + length programming - Controlled length stop 3000 mm - Various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Inv. Num. : 9163 Type: MAH 40/3 CNC Producer: AMOB Created: 2022 Parameters: Diameter of the cylinders: 148 mm Length: 1200 mm Width: 770 mm Height: 1450 mm Weight: 540 kg Hydraulically controlled upper roller feed Can be used vertically and horizontally 3 mechanically driven rollers Side rollers (manually adjustable) Adjustable control pedal 3 standard rollers

cutting diameter: 300 mm saw band length: 3660 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: round: 290 mm capacity 45 degrees: flat: 260 x 280 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: flat: 180 x 170 mm coolant capacity: ca. 100 l Control: SPS total power requirement: 2.4 kW AC weight: 904 kg range L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in  ...

grinding diameter: 630 mm grinding length: 3000 mm centre height: 315 mm grinding wheel size: 750 x 100 x 305 mm grinding wheel width: 150 taper: MK 6 chuck diameter: 315 mm grinding head swivelling: 90 Grad grinding spindle head - swivable: 30 ° table - swivable: 4,30 - 6,30 Grad grinding spindle speed: 815 / 935 U/min spindle speeds: 8 - 57 / 28 - 150 mm grinding sp.stock-cross tvl. frwd/rear/total: 420 mm grinding head quick motion: 80 mm table speed -stepless-: 0,05 - 4,5 m/min workpiece weight: 1200 kg grinding spindle drive: 22 kW Control: Siemens 840D total power requirement: 56 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 9900×2980×1875 mm The machine is suitable for grinding cylindrical and conical workpieces using longitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are ...

3 assen: Y1 / Y2 / X Amada bombering Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6,5 ton

drill diameter:5,,,,40 mm drilling length:600 mm lip angle:90-150 ° total power requirement:4,5 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill

total power requirement:413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30

max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm

rotor dia:30-500 mm hobbing length:500-1000 mm total power requirement:80 kW weight of the machine ca.:15 t dimensions of the machine ca.:3,6 x 2,5 x 3,0 m max. module:8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel

max. wheel diameter:130 mm max. module:3 total power requirement:15 kW weight of the machine ca.:6 t dimensions of the machine ca.:2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mm Accessories : Hydraulical workpiece clamping ...

groove width:- mm x-travel:1300 mm throat:- mm y-travel:150 mm z-travel:150 mm spindle speed::50/6000 upr tool taper:SK 40 numbers of positions in the tool changer:8-fach weight:2.500 kg Operating hours: 2,100 h Clamping hydraulics Pendulum operation possible 8-position tool changer

distance spindle /table:min /max 190 / 570 mm distance spindle /table:190 - 570 mm surface area:650 x 300 mm Boring power:in GG 20 40 mm bore capacity in steel:ST 60 32 mm turning speed range::50 - 5000 UpM total power requirement:2,2 kW threading:GG 20 M30 threading::ST 60 M 24 weight of the machine ca.:1400 kg table load:max. 150 kg table height:770 mm traversing speed:max X-, Y- u. W-Achse 5 m/min max. traversing speed:Z-Achse 3 m/min w-axis:380 mm workpiece height max.:495 mm tool changing time:ca. 3 sec x-travel:450 mm y-travel:300 mm z-travel:180 mm workpiece weight:1,5 kg

grinding length:600 mm grinding width:250 mm workpiece height:380 mm :Sinumerik max. dia. of grinding wheel:300 mm weight:4000 kg total power requirement:12,5 kW grinding wheels:Ø 400 mm max. width of grinding wheel:100 mm grinding wheel hole diameter:127 mm turning speeds:470 - 12030 1/min x-axis:600 mm y-axis:300 mm z-axis:250 mm grinding range:450 x 200 mm distance spindle nose and table:500 mm table load:250 kg dimensions of the machine ca.:2600 x 2100 x 2400 mm switchgear cabinet:1300 x 800 x 2000 mm hydraulical unit::450 x 350 x 500 mm Documents:vorhanden

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment

grinding length:1250 mm grinding width:600 mm workpiece height:730 mm table surface area:1720 x 500 mm headstock: dist. table - spindle center:900 mm max. longitudinal movement:X-1450 feed range:10 - 20.000 mm/min vertical movement:Y-730 mm feed range:0,2 - 3.000 mm/min cross travel:Z-550 mm feed range:5 - 5.000 mm/min power capacity:1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds:50-6.000 U/min cutting speed:max. 80 m/sec. weight of the machine ca.:11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect.

Control Heidenhain ... TNC 430 Clamping table surface... 800 x 400mm Axis X ... 500mm Axis Y ... 400mm Axis Z ... 400mm ISO 40 Spindle speed ... 0-4000 rpm. Max. workpiece weight ... 300kg L x W x H ... 2800x2700x1980mm Machine weight ... 2600kg Main engine power ... 5.5kW The machine is in good condition.

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible.

Machine type: Universal milling machine Model: X6336A UNUSED - approx working hours around 20 Table size: 1370 x 360 mm Table travel X/Y/Z: 1000 / 320 / 400 mm T-slots: 3 / 18 / 80 mm Max table load: 800 kg Spindle taper (vertical): ISO 40 Spindle taper (horizontal): ISO 50 Spindle quill travel: 127 mm Spindle speed (vertical): 66 – 4540 rpm Spindle speed (horizontal): 60 – 1800 rpm Main motor (vertical): 5 HP Main motor (horizontal): 4 kW Z-axis rapid motor: 1.1 kW Coolant pump motor: 90 W Distance spindle to table (vertical): 155 – 700 mm Distance spindle to table (horizontal): 0 – 400 mm Extension arm travel: 450 mm Extension arm rotation: 360° DRO: 3-axis (SINO) Control: Manual Included accessories: – NT40 milling chuck – Tool kit – Quartz working lamp – Gad tongs – Partial protection Power supp ...

Control: CNC AMADAN 04 PC Machine type: CNC turret punch press with fully automatic sheet handling Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table type: Brush table (scratch-free & low-noise operation) Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Pneumatic punches: 2 pcs Power supply: Three-phase Tappet stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction): - Stroke 8.0 mm – Pitch 25.4 mm – 300 / 375 strokes/min - Stroke 4.5 mm – Pitch 25.4 mm – 375 / 375 strokes/min - Stroke 4.5 mm – Pitch 2.0 mm – 600 / 600 strokes/min Tool turret: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 auto-indexable) Accuracies: Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.0 ...

Disc turret Sauter, mounting 30 mm, diameter outside approx. 340 mm - see pictures

Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904

Turret Lathe Linen Leromat 36 Year of construction unfortunately unknown. Lathe is fully functional.

• Original (OEM) Kilian die disc/turret with slideways for Kilian Synthesis 500, Generation 1 • Tool type EU-D • Punch diam. 25.4 mm, die diam. 38.1 mm • Keyed upper and lower punches • Transport trolley • Unused, like new

Specifications: Bed length: 900 mm Headstock - turret distance: 300 mm Tip height: 102 mm Number of seats in the turret: 6 Diameter of the holes: 20 mm Collets Opening: 22 mm Connection: 380 V Spindle speeds: 840 - 3000 rpm. with accessories Dimensions: (LxWxH): 900x1300x1310 mm Weight incl. pallet: approx. 650

Turret milling machine DYNAMILL B-4V - capacity 900x380x600 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1270x254 mm, Longitudinal travel x axis: 900 mm, Cross travel y axis: 380 mm, Vertical travel z axis: 406 mm, Spindle taper: 40 ISO, Spindle speed: 40- 3800 rpm, Number of spindle speeds: Stepless, Spindle motor power: 3,7 Kw, Quill spindle travel: 127mm, Number of working feeds: stepless by DC motor, Weight: 2.000 Kg, Accessories: DRO, coolant.

This Durma TPL93 turret punch press was manufactured in 2019. Its a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information.

This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine.

This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a King turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information.

This BOSCHERT Compact 750 Punching machine was manufactured in 2018. It has a table size of 750 mm (X-axis) and 2000 mm (Y-axis) and a punching depth of 750 mm with a maximum punching diameter of 105 mm. This punching machine is equipped with a punching force of up to 40 tons. Maximum cutting thickness for normal steel is at 6mm. It is build in a C-frame construction with appropriate oversizing. The cantilever structure allows for machining of parts larger than the machining space.

A vertical large-format vertical turning lathe TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, table diameter: 1000mm, max. table torque: approx. 8800Nm, machine dimensions X/Y/Z: approx. 2600mm/2700mm/4000mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Expected to be available from Q3 2026.

Dispositif à tronçonner pour broche Schaublin 102 - Type F. Etat neuf, jamais utilisé, avec des traces de stockage. Für Spindel Schaublin 102 - Typ F. Zustand: neu, nie gebraucht, mit Lagerspuren.

This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details.

1 x Schaublin 102 spindle for push clamps type F38, incomplete for spare parts 1 x Schaublin nut for F38 spindle nose, in good used condition. 1 x 8 F38 Clamps Diameter:14 - 15 -16 -17 - 18 -20 - 31 - 30. In very good condition, a new clamp (diameter 15), one used (diameter 16), one with traces of storage (diameter 18). 1 x Spindel Schaublin 102, für Druckspannzangen F38, unvollständig, für Ersatzteile. 1 x Mutter für Druckspannzangen Schaublin F38. 1 x 8 Druckspannzangen F38. Durchmesser: 14 - 15 -16 -17 - 18 -20 - 31 - 30. Durchmesser 15 mm ist neu ungebraucht, Durchmesser 16 mm sehr gebraucht, Durchmesser 18 mm mit Lagerspuren.

Centrifugal extraction turrets 400 ºC/2h with vertical rejection ATEX Auction-ID: A1-46676-10

This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details.

EMAG VL5i Vertical Lathe (2013) Max. chuck diameter: 250 mm Max. circumferential diameter: 270 mm Max. workpiece diameter: 220 mm Max. workpiece height: 175 mm X-axis travel: 660 mm Travel Z-axis: 300 mm Rapid traverse X: 60 m/min Rapid traverse Z: 30 m/min 12-cavity turret with VDI-40 tool holder Driven tools up to 6,000 rpm Power driven tools: 8.5 kW Main spindle power: 18 / 27 kW Torque main spindle: 200 / 300 Nm Chip conveyor available Emulsion mist extraction available Control Siemens 840D SL Operating hours: 44,500 h Auction-ID: A7-47048-78

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 365 U/min milling motor:37 kW ram head dimension:240 x 240 mm max. ram stroke:1250 mm total power requirement:133 kVA weight of the machine ca.:50 t dimensions of the machine ca.:11 x 5 x 6,4 m Machine was overhauled in 2008 by OEM New control CNC SIEMENS 840 D automatic tool changer 72-pcs C-axis with driven tools Angle-, straight tool holders with CAPTO holder Coolant device Chipconveyour

faceplate diameter:2000 mm swing diameter:2130 mm turning height:1400 mm ram stroke range:1000 mm workpiece weight:10 t faceplate turning speed range:1 -200 U/min main drive:60 kW total power requirement:95 kW weight of the machine ca.:24 t dimensions of the machine ca.:6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor