turntable used for sale

Robopac Masterplat Plus PGS pallet wrapper 2021, turntable style pallet wrapper, turntable diameter 1630mm, wraps up to 1900mm, adjustable speed, 1Ph

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

Key data: 2000 kN

Wittmann Battenfeld VM 200/525H R1520 Servo Power / Hybrid machine with one turntable Year of construction: 2013 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 200 t Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 in automatic mode Air Valve x 4 Hydraulic Core Pull x 6 Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1520 mm Main motor of the machine - servo motor driven by inverter Horizontal injection unit with automatic injection height adjustment The machine can work with a second vertical injection unit Holder for automatic tool clamping Proportional valve on the injectio ...

Description: Longitudinal travel of upright X 10,000 ,mm Spindle head vertical travel Y 3,300 mm RAM transverse travel Z 1,100 mm Spindle quill travel W (boring bar) 800 mm Translating travel C 2,000 mm Turntable plate positions B 360,000 n Turntable size 2,700 x 2,700 mm Drilling unit vertical travel V 2,700 mm Drilling unit transversal travel U 500 mm SELCA S4045PD control Serial number 02-021.021 Dig depth 2000 mm z-motion: 1,200 mm, table surface area l x w : 2700 x 2700 mm, control: SELCA 4045PD, power capacity - spindle: 50 kW, weight approx.: 160,000 kg, Approx. Onsite Dimension. (l x w x h): 19,000 x 10,000 x 6,000 mm

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : roundtable / turntable diameter : 800mm / 1000mm/1200mm/1400mm/2000mm electrical : 230 VAC / on request 400V/3ph - Legs adjustable - Stainless steel construction - Speed control with frequency converter - CE confirmation - Manual and electr. draw - driven with geared motor - edge high 30mm The base frame has a support for the lift truck transport I offer this machine in NEW condition Round table in Stainless steel Ø mm Round table 800 Round table 1000 Round table 1200 Round table 1400 Round table 2000 Example fotos, with additional parts

Turntable 1200 mm height-adjustable from 750-950 mm Capacity of the plate up to 60Kg. Trade show models - like new condition BJ. 2014 Frame made of aluminium - pages Vollverkleidet Speed adjustable You To find more information on request other machinery and accessories below: abc://abc.resale.de/angebotelinkd-user.php?myid=35837 & dealer = 1 & order = 1 & or abc://abc.resale.de/angebotelinkd-user.php?myid=35846 & dealer = 1 & order = 1 &

- Sturdy aluminum profile housing - Front loading via sliding door Further options for the machine frame: pneumatic lifting door or turntable individual customer wishes possible, e.B. Special dimensions of the marking chamber or lateral loading - Fiber laser 20 Watt with IPG fiber module (also available with 30 watt or 50 watt fiber laser) - Automatic Z-axis with 300 mm travel Another option: Turning unit for segmental labeling of the surface of cylindrical workpieces - Control via labeling software - Lens 160 mm (further lenses possible) - Perforated grid base plate (stainless steel) for workpiece mounting -LED interior lighting - Interior prepared for suction -Stable articulated arm with 23" monitor, mouse and keyboard, - Windows 10 operating system - Marking software Weldmark by Raylase On request also: Commissioning, instruction and trainin ...

Glazing and cleaning booth in stainless steel, with KSB water pump 2,2 kW, suction fan 3.0 kW (incl. Exhaust tube 600 mm Ø), lighting, turntable and switchgear cabinet. Dismantled, ready for transport.

Bettcher Power cleaver / slicer Model: 39 Stainless frame, six product chutes on turntable, with stainless circular blade for slicing, ideal for slicing salami / pepperoni etc

Cleaning system make DÜRR type Ecoclean 18 W / DT 16/10Fabr. -No: 5031 built in 1999Workpiece width max.: 700 mmWorkpiece height max .: 600 mmWorkpiece weight max.: 1000 kgContainer capacity: 1.5 m³Working temperature: 45 - 70 °Pump capacity: 35 m³ / hPump power: 7.5 kWPump pressure: 4 barNumber of hand nozzles: 3general spray system: on all sidesTurntable Drum: 1400 mmMax. Table load: 1.5 tRotary table speed: 0.3 - 1 rpm.Max. Feeding quantity: 500 kgusable area: 1.5 m²Weight of the system: 3.0 tDrive power of the turntable: 7.5 kWConnected load: 57 kWWater connection: R1 Fresh water consumption approx. 50-100 l / hHeating power: 48 kWHeating time: 2.2 hExternal dimensions of the system: 4460 x 2970 x 3750 mmWith- Loading trolley- Cover that closes the treatment roomxa0xa0(2 vertical lifting columns with geared motor)- rigid spray system- add. 3 manual externally operable nozzles- C ...

Ampack KF1/3 cup filling machine. Format parts for 75 and 95 mm round Cup. filling volume 100-550 ml, filler and productfunnel CIP cleanable. equipped with H2O2 cup desinfection, Infra Red lid desinfection and HEPA overpressure system. Capacity up to ±7200 cups per hour. With cup conveyor and turntable. Built in 1995, very good condition. Machine is still in operation until end of 2017. including documentation

Universal crimping system for tank bottoms or container bottoms of all kindsFabr. ECKOLD type BA 75, year of construction 1976Max. Floor size: 4000 x 4000 mmMax. Material thickness aluminum: 5.0 mm: Steel: 4.0 mm: VA: 3.0 mmHorizontal reach: 2150 mmVertical projection: 1320 mmhydr. Cylinder stroke: 1000 mmMax. Pressure: 110 barMax. Compressive force: 55 kNDrive power: 7.5 kWOutside dimensions approx: 3030 x 1030 x 1410 mmWith- Swiveling extension arm 0 - 200 °- built-in hydraulic cylinder- Flare shape receiving head- turntable- Hydraulic unit- pneum. Lifting and balancing device (Conco-Balancier)- mobile crimping device and pressure tongs type B 75 - 50xa0xa0 Worker 7.5 Mpxa0xa0 Pressure 490 barxa0xa0 Horizontal reach 150 mmxa0xa0 Projection vertical 230 mmxa0xa0 Weight approx. 45 kgThe universal flaring system is suitable for flanging all common tank or container bottoms in round, oval ...

Used machine vice with turntable Jaw width, approx.: 180 mm Wingspan, approx.: 165 mm Dimensions LxWxH, approx.: 610 x 360 x 180 mm Weight, approx.: 60 kg

Hydr. Metal circular saw make KALTENBACH type KKS 401Machine -No: 113025 Year 1991Saw blade size: 375 - 425 mmCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 x 120 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmCutting width: 5.0 mmSaw blade hole: 50 mmSaw blade feed speed: 0 - 1200 mm / min.Opening stroke of the vice: 160 mmTurntable adjustment stepless: + - 60 °Cutting speed: 10 - 60 m / min.Drive power: 5.5 kWWeight approx: 1.35 tOutside dimensions approx: 1360 x 720 x 2100 mmWith- aut. duty cycle for straight and oblique cuts- mot. Transmission adjustment- hydr. Drehtischklemmung- hydr. Turntable rotation- mot. saw gear adjustmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer an ...

Slotting machine Perini CMP 450 Stroke adjustable from 120 to 450mm Throuth 600mm Ramadjustment 500mm Tabledimensions 580x1000mm Tabledisplacements 400x400mm Brakemotor 4.5Kw Strokes 12-60/min Powerfeed Tilting of head Li-Ri 45° Automatic lubrication system Ram newly scraped Incl turntable chuck and some tools

CNC milling machine DECKEL type FP 3 A Fabr. No. 2206 - 0325 Year of construction 1980 CNC line control GRUNDIG CNC 2101 Travel X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle holder SK 40 Pinol stroke 100 mm Spindle speed 25 - 2500 rpm. 21 steps Feed speed 5 - 500 mm/min. infinitely variable rapid traverse speed 1200 mm /min. Motor power Spindle drive 2 / 4 kW pole switchable Mains connection 380 Volt, 50 Hz - CNC line control GRUNDIG CNC 2101 - mechanical handwheels for all three axes - Universal swivel-tilt-turntable - Hydro-mechanical tool clamping - Coolant device in the machine foot - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement L x W x H 1800 x 1700 x 1950 mm Weight approx. 2000 kg good condition; used

Sell a small grinding machine suitable for grinding small areas, or tools grinding rotary steels, shock chisels, etc. Table clamping surface 560120mm Table stroke Handheld manually approx. 300mm Distance grinding wheel (bottom edge) top table approx. 270mm Cross stroke manually approx. 100mm Table is designed with a turntable Grinding head is also for turning Pulling device Abawerke

Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H90 mm -Weight: 13 kg

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H65 mm -Weight: 9.7 kg

4. Axis incl. control for: milling, grinding, testing/measuring; Engrave IDEAL also for "machines in training" Specifications: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial runout: 0.006 (optional: 0.003 mm or 0.002 mm) Transport load max.: (limited by motor) without support: 40 kg (only if turntable is screwed down) with support: 80 kg Total weight, approx.: 25 kg Execution: - Stepper motor - motor-dependent, backlash-free timing belt drive including correct preload - With automatic spindle clamping with 6bar compressed air - Fully sealed IP 67 - Sensors with light-emitting diodes, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnostics - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis)  ...

Inv. Num: 5345 Type: Insert 330H 90 Producer: Engel Generated: 2006 Parameters: Clamping force: 340 t Injection capacity: 113 cm3 Screw diameter: 30 mm Facilities: Turntable

Key data: 420 mm, 650 mm

Article number: 19-03-028 Manufacturer: Kasto Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1300x800x1400mm Weight: approx. 1000kg Saw blade dimensions: approx. 650x55x2.5mm Cutting range: 90 degrees Round: approx. Ø420mm Square: approx. 300x300mm Flat: approx. 420x420mm Cutting range: 45 degrees Round: approx. Ø320mm Square: approx. 260x260mm Flat: approx. 320x260mm Mitre cut: approx. 0-45 degrees Accessories  Cutting pressure adjustable  Adjustable number of strokes  Coolant device  Footswitch  Turntable Other accessories on request Price and other technical data on request

X-travel: 800mm, y-travel: 500mm, z-travel: 400mm, working height: 980mm, turntable diameter: 900mm, connected load: 12.5kW, control: Siemens Sinumerik 840D, length: 2710mm, width: 1815mm, height: 2645mm, weight: 1.86t, weight control cabinet: 300kg, with documentation, an on-site inspection is possible.

CN FAGOR 8055-T Machine equipped with quota viewers, turret 2nd pentagonal wagon Spindle diameter 2,000 mm Maximum turntable height 1,310 mm RAM stroke 1,000 mm Maximum diameter 2,200 mm Spindle Max Speed 150 rpm Nr. 3 wagons type 1 RAM 1 turret 1 side Main engine power 52 kW

x-travel: 2600 mm y-travel: 1600 mm z-travel: 1700 mm Control: Fanuc 16 MB total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 42 x 18 m The system requires a space of approx. 42 x 18 m It is designed for fully automatic operation in 3 shifts. Components with tolerances of

Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.

table diameter: 1500 mm table load: 5 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 10000 Nm 0: 1,5 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm table load: 1,0 t swivelling range: 135 Grad turning speeds: 0,12 - 1,2 U/min : 820 mm welding current: 500 Ampere total power requirement: 0,75 + 0,55 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 1,2 t swivelling range: 0 - 120 Grad turning speeds: 0,06-0,6 U/min max. torque on the faceplate: 2400 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,75 + 1,1 kW weight of the machine ca.: 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cup diameter: 75mm, max. output: 6000 cups/h, filling capacity: 30-200ml, with outfeed conveyor and take-off turntable, without printer.

Connected load: 50W, with turntable, without documentation, on-site inspection is possible.

table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1000 - 1450 mm max. torque on the faceplate: 2000 Nm engine output: 0,75 / 0,55 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 560 mm table load: 0,3 t swivelling range: 0 - 90 Grad turning speeds: 0,25 - 4,0 U/min : 360 Nm welding current: 500 Ampere total power requirement: 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 2,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Includes 1x high-speed door, 3x turntable for 90° rotation, 11x carrier chain conveyors, 1x transfer carriage, 1x roller conveyor system-roller conveyor, max. installation height: 1000mm, use within a factory building, permitted conveyed goods: Euro pallets and Chep, with extensive documentation, numerous spare parts can be supplied, on-site inspection is possible.

table diameter: 1600 mm table load: 6 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 12000 Nm 0: 1,5 / 2,2 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 800 x 800 mm table load: 1500 Kg swivelling range: 0 - 105 Grad turning speeds: 0,15 - 1 U/min height adjustment: 672 - 1180 mm hollow spindle diameter: mm welding current: 500 Ampere max. torque on the faceplate: 3000 Nm total power requirement: 0,75 kW dimensions of the machine ca.: 1560x1120x750 m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fal ...

table diameter: 700 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min : 900 Nm total power requirement: 0,37 / 0,37 kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 10000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,5 + 3,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg length: 10000 mm width: 2500 mm height: 625 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 2,9 t dimensions of the machine ca.: ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min saw band length: 3320 x 27 x 0,9 mm weight of the machine ca.: 640 kg Furnishing: - autom. Saw bow lowering, with infinitely adjustable feed - Limit switch-off at the end of the cut - manual function - built-in coolant device - Large mounted turntable for miter cuts from 45 ° right - 60 ° left - saw band - Chip removal brush - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 mm capacity 45 degrees: round: 110 mm capacity 60 degrees: round: 90,0 mm capacity 90 degrees: square: 95,0 mm capacity 45 degrees: square: 95,0 mm capacity 60 degrees: square: 90,0 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: flat: 125 x 95 mm capacity 90 degrees: round: 115 mm capacity 60 degrees: flat: 90 x 90 mm 0: 15 / 30 / 45 / 90 U/min weight of the machine ca.: 375 kg Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The large turntable with internal table clamp & Precision stops at 0/45/60 ° ensure quic ...

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The  ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Functionality of semi-automatic operation: - Clamping th ...

table diameter: 900 mm table load: 1.000 kg turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - either manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in German ...