turntable used for sale

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 215 mm -Throughout: Ø 67 mm -Weight: 14 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Throughout: Ø 77 mm -Weight: 18 kg

table diameter: 1400 mm table load: 3,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 300 mm table load: 50 Kg swivelling range: 90 Grad turning speeds: 1 - 12 stufenlos U/min table load capacity: 50 kg vertikal total power requirement: 0,22 kW weight of the machine ca.: 0,036 t dimensions of the machine ca.: 0,45 x 0,43 x 0,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mm table load: 0,5/0,25 t swivelling range: 0 - 90 motorisch Grad turning speeds: 0,2 - 2,5 U/min spindle bore: 100 mm Torque: 375 Nm welding current: 500 Ampere connected load frequency: 230 Volt weight: 290 kg Dimensions (LxWxH): 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mm table load: 2000 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1100 - 1550 mm max. torque on the faceplate: 4000 Nm engine output: 1,1 / 0,75 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 20 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 51 mm -Weight: 9 kg

table diameter: 1300 mm table load: 3 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 6000 Nm 0: 1,1 / 1,1 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mm table load: 2 t swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min : 4000 Nm 0: 1,1 / 0,75 kW welding current: 500 Ampere • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1800 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min : 16000 Nm 0: 1,1 / 2,2 kW welding current: 1000 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm table load: 300 Kg swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 300 kg vertikal total power requirement: 220 kW weight of the machine ca.: 0,078 t dimensions of the machine ca.: 0,66 x 0,45 x 0,48 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 55 mm -Weight: 11 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -with: base plate -Weight: 26 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm -Passage: Ø 76 mm -Weight: 26 kg

table diameter: 350 mm table load: 100 Kg swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 50 kg. vertikal total power requirement: 220 kW weight of the machine ca.: 0,055 t dimensions of the machine ca.: 0,46 x 0,4 x 0,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 3 t swivelling range: 0 - 135 Grad turning speeds: 0,07- 0,7 U/min table height adjustment: von 980 bis 1750 mm max. torque on the faceplate: 4500 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min height adjustment: 1450 - 2200 mm max. torque on the faceplate: 20000 Nm engine output: 1,5 / 2,0 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 4 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 8000 Nm 0: 1,1 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 50 mm -one set: hard interchangeable jaws -Weight: 15 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Camlock: 3-bolt mount, hole circle Ø 140 mm, short taper Ø 102 mm -Throughout: Ø 77 mm -Weight: 29 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Rezess: Ø 130 mm -Hole circle: 3 x 144 mm -Throughout: Ø 41 mm -Weight: 6 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg

table length: 400 mm table width: 400 mm table load: 0,2 t table diameter: 400 mm swivelling range: 90 Grad turning speeds: 0,2 - 2 stufenlos U/min table load capacity: 100 kg. vertikal total power requirement: 220 kW weight of the machine ca.: 0,065 t dimensions of the machine ca.: 0,56 x 0,42 x 0,46 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mm table load: 10,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 20000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 3,0 + 4,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 3000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1200 - 1800 mm max. torque on the faceplate: 6000 Nm engine output: 1,1 / 1,1 kW welding current: 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mm table load: 8 t swivelling range: 0 - 130 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1210 bis 2238 mm max. torque on the faceplate: 1200 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -one set: hard interchangeable jaws -Passage: 81 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -without: interchangeable jaws -Throughout: Ø 77 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 77 mm -Weight: 27 kg

table diameter: 550 mm table load: 500 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlos table load capacity: 250 kg. vertikal total power requirement: 0,8 kW weight of the machine ca.: 245 Kg dimensions of the machine ca.: 820 x 730 x 710 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,8 U/min max. torque on the faceplate: 450 Nm table pass: 80 mm welding current: 500 Ampere total power requirement: 0,18 + 0,18 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mm table load: 0,5 t swivelling range: 0 - 135 Grad turning speeds: 0,2 - 3 U/min height adjustment: 400 - 900 mm boring diameter: 100 mm welding current: max. 500 Ampere total power requirement: 0,75 kW including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 210 mm -Flange: Ø 185 mm -Hole circle: Ø 190 mm -Through hole: Ø 67 mm -Weight: 12 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Flange: Ø 210 mm -Hole circle: Ø 230 mm -Through hole: Ø mm -Weight: 19 kg

Machine vice base plate, clamping plate, vice plate, turntable -with: T-round groove -Dimensions: 330/240/H40 mm -Weight: 10kg

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mm table load: 0,6 t swivelling range: 0-90 Grad excentricity: 200 mm table turning speeds: 0,2 - 2 U/min Torque: max. 900 N/m total power requirement: 0,37 kW dimensions of the machine ca.: 1,1 x 0,92 x 0,8 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...

table diameter: 560 mm table load: 0,3 t swivelling range: 0-90 Grad table turning speeds: 0,25 - 4 U/min Torque: max. 360 N/m centre of gravity: max. 150 mm total power requirement: 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-H ...

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: FD, three-jaw chuck mount SK40 -Chuck size: Ø 85 mm -Passage: Ø 16 mm -Weight: 2.3 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Drm. 242mm -Passage: Ø 78 mm -Bolt circle: Ø 185 mm -Weight: 19 kg

Welding turntable - Welding rotary device with housingRound welding deviceLoad capacity approx. 50 kgTurning chuck diameter 300 mmTurning chuck speed 1.0-15 rpm. Mains connection 230 volts, 50 Hz- Spiral lathe chuck with inwardly stepped chuck jaws- Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left- Start via electric switch- Welding current transmission with sliding contact- Extraction connection 160 mm- Interior lightingDoor opening W x H 715 x 1060 mmInterior dimensions W x D x H

Turning table, 180 rest table, rotary table with aluminium topPositioning table, rotary table, round dividing table 180Assembly table, swivel tableTurntable: 1080 mmOverall height to top edge turntable: 630 mm- Turntable made of 25.5 mm thick aluminium plate with various holes- very stable turntable, can be rotated by hand- 2 pieces index locking positions 180, manually via foot lever for de-latching- stop damper under the turntable for the locking positions- very stable steel substructure- flange plate steel substructure L x W x H = 600 x 600 x 20 mmSpace requirement

table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,6 - 6,0 U/min bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating ins ...

total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software  ...