turn used for sale

Key data: 1600 mm, 3500 mm, 800 mm

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...

DIEDESHEIM vertical lathe Vertifront 120-12 CNC. Electrics and geometry overhauled in 2007 for approx. 290.000,00 €! Former machine of the company Hoesch Rothe Erde Lippstadt, permanently maintained and maintained. Equipped with two turret supports (5-fold), protective hoods against emulsion vapors, housing see pictures, CE compliant. Details: Type 120-12 CNC Machine number L738 Year of construction 1983 Refurbished 2007 Space requirement approx. 20 sqm Weight approx. 20 to Power consumption approx. 110 kW Headstock Main spindle bearingsØ axial 500 mm radial 240 mm Cross Slide Unit Vertical slide stroke 800 mm (Z-axis) Paddling slide stroke 1,000 mm (X-axis) Basic hydraulics complete, system RING 2x2 axis CNC path control SIEMENS Sinumerik 3 TT Optional accessory 6-fold face plate clamping ideal for thin-walled workpieces ...

CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe  ...

Machine Details Stock number 1105-03796 Machine type CNC lathe Make HARDINGE Type ELITE II 8/51 Year of construction 2006 Control type CNC Control FANUC 21 I TC Storage location FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TC 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height  ...

Lathe Manufacturer: Meusser & Co. - Frankfurt am Main

Lathe Manufacturer: Meusser & Co. Frankfurt am Main

Sell a Thissen telescope. new Never been installed. For a 30NC-244.384, Ident No. 20761, Art.Nr.: A2976001, .VB

510 J type - equipped with Iemca MiniBoss 325/37 new in 1996 - tool eye - accessories - Fanuc 18-TB Control

Manufacturer GEMINI Model GHT4-720 x 2,000 Year 2002 FAGOR 8055 CNC Capabilities Max. Ø turning on bed / carriage 720/470 mm. Height of points on flat guide 366 mm. Distance between points 2,000 mm. Fast Forward X/Z Axes 8 m/min Head Nose Head DIN-55027-11 Main shaft hole diameter 104 mm. Head Revolutions 0-1600 No. of Automatic Head Ranges 2 Main Motor Power 17/ 20.5 kW. Maximum torque 1590/1920 Nm Counterpoint Tailstock shank diameter 100 mm Tailstock shaft course 200 mm Morse 6 Tailstock Rod Housing Equipment 4 Post-Automatic Turret. Full Rear Protection INCLUDED Universal 3 Claws Plate INCLUDED Fixed bezel Cap. 50/220 INCLUDED Maximum permissible weights Max. piece weight between points 2,560 kg With 1 bezel / With 2 bezels 3,200/4,000 kg Rim-in with center of gravity at 250 mm. 800 kg Others Total power 28 kW Machine weight 4,900 kg. Machine Di ...

Control Other GDW Spindle Passage [mm] 43 Rotary diameter. [mm] 300 Turning length [mm] 650 Main spindle: Belt spindle technology Speed 4,500 rpm Power (max.) 7.5 kW Torque (max.) 80 Nm Spindle Passage 43 mm Workpiece clamping 3-jaw chuck, Röhm ZS ø160 mm Tool carrier (X/Z): Technology slide with 4-cavity turret Tool holder ready size 1 Travel in X/Z 170/650 mm Rapid traverse in X/Z 6 m/min Tailstock: Technology Manual tailstock with handwheel Quill stroke 110 mm Quill ø 50 mm Quill Cone MK3 Equipment/accessories: Chip disposal chip tray Coolant Management KSS Pump Tool holder Div. gebr. Parat Holder Further accessories 4-jaw chuck ø160 mm, various used Baking

Machine Details Stock number 1105-03807 Machine type CNC turning and milling center Brand Mori Seiki Type NL 2000 SY Year of construction 2005 Control type CNC Control MSX 850 Mapps 3 Storage location FRANCE Country of origin Japan Delivery time immediately Freight Base EX WORK Technical details turning diameter 356 mm Turning length 510 mm Control MSX 850 Mapps 3 Swing diameter 755 mm Standard turning diameter 275 Rod diameter 65 mm Travel - x 260 mm Travel - z 590 mm Spindle drive 15 kW Spindle speed 5000 1/min Turret stations / powered 12/12 Rapid traverse - longitudinal/flat 30 m/min Total power requirement 32 kW Machine weight ca. 5,8 t Space requirement approx. 2320 x 1783 x 1819 mm Accessories Conveyor High-pressure cooling 5 bar Workpiece counter Total counter Double foot switch Information High performance CNC lathe SUP SPINDLE + C AXIS + ...

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm

table diameter: 315 mm : 50 Kg : 25 Kg chucking diameter: 200 mm turning speeds: 0 - 5 stufenlos swivelling range: 90 Grad tilt adjustment: manually/mechanicall: manuell connected load frequency: 230 V weight of the machine ca.: 45 Kg dimensions of the machine ca.: 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock number 1105-03825 Machine type CNC lathe Make HARDINGE Model ELITE 8/51 Year of construction 2003 Control type CNC Control FANUC 21 I TC Storage location HAGUENAU FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TB 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998

Key data: 130 mm, 160 mm, 6000 1/min

CNC lathe ARIX / HUMMER T-42CL + bar loading magazine Robust Nitro + chip conveyor – year of construction 2025 For sale is a modern CNC lathe of the type HUMMER T-42CL (ARIX CNC Machines) including bar loading magazine Robust Nitro. The machine was built in 2025, is in very good condition and is ideal for cost-effective series production. Technical data: Model No.: T-42CL Manufacturer: ARIX CNC Machines (Taiwan) Year of Make: 2025 Spindle speed: up to 6,000 rpm Bar Passage: 42 mm Max. turning diameter: approx. 130 mm Max. turning length: approx. 160 mm Axles: X: 225 mm Z: 235 mm Y: 385 mm Main spindle: Power: 7.5 kW Collet holder: A2-5 Tool Stations: 5 lathe tools + 4 driven tools Total: 8 Lots Machine weight: approx. 3,300 – 3,500 kg Equipment: Bar loading magazine Robust Nitro (automatic material feeding) Live Tooling Suitable for series production  ...

The machine is in good technical condition, after prior agreement it is possible to test it. Max swing diameter 660 mm Max turned diameter 660 mm Main spindle: Speed ​​range 35-5000 Main drive power 22/15 kW Max torque 349Nm Spindle bore 76 mm Chuck diameter 210 mm Indexing (C axis) 0.0001 Second spindle: Speed ​​range 35-5000 rpm Power (10 min/constant) 18.5/15 kW Max torque 326 Nm Chuck diameter 210 mm Indexing (C axis) 0.0001 Coolant tank capacity 300 l Machine power 66 kVA Operating voltage 400 V / 50Hz Air pressure 5 bar, 500 l/min Control system MAZATROL Fusion 640 MT Flush cooling: Pump capacity 20 l / min Pump pressure 5 bar Accessories Technical documentation, chip conveyor with cooling, magazine for 20 tools B axis (positioned in 0.001, C axis, Y axis Indexing of the rotation position of the second spindle, Synchronization of the main and second spindles Tool pre-settin ...

pile turner Rachner RD 800 P; condition outdated; Format 600x900; Load capacity 800kg; new tilting cylinder; upper cylinder overhauled; pump and tank cleaned; new tilt valve. Pile turner Rachner RD 800 P; condition rebuilt; size 600x900mm; lifting capacity 800kg; new turning cylinder; upper cylinder rebuilt; pump and tank cleaned; new turning valve.

Machine Details Stock number 1105-03830 Machine type CNC lathe Brand HYUNDAI Type HIT 200 M Year of construction 2000 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from stock Price Technical details Turning diameter 325 mm Turning length 400 mm Control SIEMENS 810 D Circumferential diameter over bed 500 mm Travel - x 215 mm Travel - z 420 mm Rapid traverse speed 24 m/min Speed range 30 - 4500 rpm Tool turret 12 FOLD VDI40 Spindle bore 52 mm Mounting cone in the tailstock quill MK 4 Tailstock quill diameter 80 mm Tailstock quill stroke 130 mm Drive power 15 kW Operating voltage 380 V/ 50 Hz Total power requirement 23.5 kVA Machine weight ca. 4.5 t Information MACHINE WITH C AXIS AND DRIVEN TOOLS - Control: SIEMENS 810 D - Hydraulic 3-jaw chuck Ø 204 mm - Tailstock with ...

Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK

4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5 threading device 1x threading spindle pick-up spindle broaching device set of cams set of collets bar-loader Cucchi Giovanni (YOM 2004)

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 91 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Weight: 47 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Tool holder: 27 mm -Number: 9 recordings -Price: per piece -Dimensions: 73/67/H197 mm -Weight: 4.7 kg

First installation year 2010 - Bar capacity 52 mm - The machine has always worked with oil - Equipped with Lns Sprint S2 barfeed, front magazine type, and a lot of accessories (for both lathe / barfeed) - Fanuc 31i-A Control.

HNK HCL 41x14 crankshaft CNC lathe Max. Swing Dia. Over Carriage Ø4,100mm Max. Center Distance 14,000mm Chucking Ø700~2,000 mm Steady Rest Ø510~860mm Max. Loading 160Ton

Machine vise base plate, clamping plate, vice plate, turntable -with: T- round groove -Grad display -Dimensions: 265/185/H50 mm -Weight: 4.4 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Tool holder: adjustable -Recording: MK6 -Measures: see pictures -Dimensions: 420/140/163 mm -Weight: 11.2 kg

Vertical lathe MORANDO 2000 for sale Technical data: - X axis: 1600 mm - Axial travel: 900 mm - Turning diameter: 2100 mm - Maximum turning height: 1350 mm - Platform diameter: 2000 mm - Maximum table load: 21000 kg - Spindle power: 75 Kw - Spindle revolutions/minute: 110 rpm

Nitrogen Furnace nitrogen furnace Pit furnace, top condition. 50kW ele Max T. 950°C Anealing in hydrogen, nitrogen atmospere Batch size 800x1000mm run only for tests and start of production similar possible furnace REY, Naberther, CFI, SAIREM, SOLO, ALD, ECM, BMI, CERIC WISTRA, ELTI, ECM, NAGAT SAT, SAFED, SERTHEL, SLFI, MORGAN, OTTO JUNKER, CIEFFE Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammh ...

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 57 mm -Weight: 10 kg

Machine vise base plate, clamping plate, vice plate, turntable -with: T- round groove -Grad display -Dimensions: 235/175/H50 mm -Weight: 6 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg

Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

Brake boring device Hunger 6.5 A 400 V System Brake drum & disc with accessories Grinding spindle Safety grilles

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 190 mm -Through hole: Ø 57 mm -Weight: 19 kg

Inv. Num. : 6203 Type: E160A Producer: Hyundai Generated: 2018 Parameters: Control system: FANUC i-series Operating hours: 5042 h Switch-on hours: 2531 h Maximum turning length: 300 mm turning diameter: 280 mm Maximum length travel in the X-axis: 165 mm Maximum feed in the Z-axis: 330 mm Maximum main spindle power: 11 kW Maximum spindle speed: 6000 1/min Equipment: Bar feeder Autobar (diameter 65 mm/length 1 meter/year 2018) C-axis Conveyor Tool holder Chuck CNC tailstock Tools

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Rezess: Ø 155 mm -Hole circle: Ø 174 mm -Passage: Ø 54 mm -Weight: 11 kg

Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 140 mm -Passage: Ø 76 mm -Weight: 30 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm -recess recess: Ø 194 mm -Weight: 20 kg

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 225 mm -Throughout: Ø 70 mm -Weight: 25 kg

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.