turn used for sale

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1994 Chuck size: 380 mm Center height: 300 mm Maximum turning length: 4000 mm Bed length: 5250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 7000 mm x 1500 mm x 1500 mm H Our internal ref. 779

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1997 Chuck size: 370 mm Center height: 300 mm Maximum turning length: 5000 mm Bed length: 6250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 8000 mm x 2000 mm x 1500 mm H Our internal ref. 787

CNC lathe Type: Quick Turn 100 SG Manufacturer: Mazak Year: 2018 Control: Mazatrol SmoothC Max turning diameter: 280 mm Max turning length: 340 mm Max swing over bed: 580 mm Spindle bore: 42 mm Max spindle speed: 6000 rpm X: 200 mm Z: 340 mm Turret: 12 positions Chip conveyor Machine weight: 3200 kg In good condition, under power Find more here - / Contact us at -

x-travel: 185 mm z-travel: 360 mm b-travel: 460 mm control: Mazatrol 640 T Maximum swing diameter: 550 mm Maximum turning diameter: 280 mm workpiece weight max.: 200 kg bar capacity: 51 mm main spindle speed: 35-6000 U/min milling head speed: 25-4500 U/min rapid power traverse in X-and Z direction: 30/33 m/min Rapid traverse B axis: 30 m/min tool turret: 12 Plätze weight of the machine ca.: 4100 kg Capacity: Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret edge: 80–535 mm Main spindle: Speed: 35–6000 rpm Spindle bore: 61 mm Counter spindle: Speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm  ...

turning diameter:220 mm turning length:310 mm total power requirement:17 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:2,25 x 1,63 x 1940 m greates pass round over bed:430 mm bore diameter:45 mm centre distance:687 mm slide travel radial ( X-axis ):160 mm slide travel axial ( Z-axis ):310 mm spindle turning speed range:0-6.300 U/min

turning diameter:220 mm turning length:700 / 665 mm total power requirement:17 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,63 x 1,98 x 1,94 m greates pass round over bed:430 mm Part length max.:510 slide travel radial ( X-axis ):160 mm bore diameter:45 mm

turning diameter: 180 mm turning length: 140 mm control: FANUC 21TB bar capacity: 30 mm spindle turning speed range: -6300 U/min Top turret tool hodler:: 8 Stationen weight of the machine ca.: 0.8 t dimensions of the machine ca.: 2.2 x 1.1 x 1.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EMCO Turn E65Year of manuf. : 2016 Control : Siemens 828D - ShopTurn Turning diam. : 500 mmTurning length : 520 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:5.000 rpmPower (max.):22 kWTorque (max.):305 NmBarcapacity:65 mmWorkpiececlamping:3-Jaw chuck, SMW Autoblok 210 BBToolcarrier (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI 30Tooldrive:5.000 rpm, 5 kW, 20 NmMovement in X/Y/Z:260/80/610 mmRapid travers in X/Y/Z:30/15/30 m/minTailstock:Technology:Hydraulic drivenTailstockforce (max.):8.000 NStroke:500 mmCone:MK4Equipment/Accessory:Chipmanagement:ChiptrayCoolingmanagement :Internal coolant pump with High-pressure, 14 barRawmaterialfeed:Interface Barloader preparedFinishedpartremoval:Partscatcher with conveyor beltToolholder:Misc. used static and driven toolsFurther Equipment:Rinsing pistol

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

Technical data: 1-drive unit / 1-loose unit 2012 overtaken max. load: 10 to Container diameter: 1000-5000 mm Roll diameter: 540 mm Roll width: 600 mm

TURNING ANGLE: 180°, BILLET SIZE: QUADRATE: MAX. 240 MM, SQUARE: MAX. 210 x 250 MM, U & I FORM: MAX. 400 MM, WEIGHT: MAX. 5500 KG,

Volume: 1000 ltr. Material: mild steel

Lifting and Turning Device for beverage paper roll consists of: Jumbo Reel Lifting and Turning Device for beverage carton paper rolls, your choice: manual (manufacturer BT), with battery electrical lifting (manufacturer Tetra Pak)or with battery electrical lifting and autom. hydr. turning (manufacturer BT)

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Woodturning machine DB 1100 new 230 V 0.75 kW 50 Hz Top distance of 1100 mm Tip height 179 mm Machine bed, base, tailstock made of cast iron Speed control of 500-2000 RPM MK2/M33 Spindle stock 90 ° swiveling ideal for large diameter! Weight 92 kg G & pieces 5921100

2006 completely rebuilt Clamping surface: 1,800 x 1,800 mm Table height: 800 mm Maximum table load: 20 tons. Table displacement: 850 mm Electrics: 400 V / 50 Hz

see picture - on Anfr.

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : roundtable / turntable diameter : 800mm / 1000mm/1200mm/1400mm/2000mm electrical : 230 VAC / on request 400V/3ph - Legs adjustable - Stainless steel construction - Speed control with frequency converter - CE confirmation - Manual and electr. draw - driven with geared motor - edge high 30mm The base frame has a support for the lift truck transport I offer this machine in NEW condition Round table in Stainless steel Ø mm Round table 800 Round table 1000 Round table 1200 Round table 1400 Round table 2000 Example fotos, with additional parts

Rotary actuator DW100, DIN, F07/10, 8kt. 17, ATEX pneumatic, double acting Manufacturer: End fittings Type: ED621002/AX Serial No.: 534623 / 41977 According to Directive 94/9/EC (ATEX) The Max Media and ambient temperatures may following individual temperature classes Values do not exceed: 65 ° C at temperature class 6 80 ° C at temperature class 5

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

Machine Details Warehouse number 1105-03536 Machine type CNC lathe - inclined bed machine Haas brand Type SL 20 THE Year of construction 2006 Control type CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Technical details Turning diameter 584 mm Turning length 533 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circulation diameter 584 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool changer 12 COMPARTMENT Gear levels 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirement approx. 3.3 X 2 X 1.9 H m Information CNC HAAS LINING SLIDE 210 MM+ TAILSTOCK SPAENEFOEDERER

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO

Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.

Machine Details Stock-No. 1105-03620 Type of machine CNC Lathe Make SPINNER Type TC 32 Year of manufacture 1999 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time Immediate Freight basis ex Site Technical details turning diameter 150 mm turning length 300 mm control SIEMENS 810 D swing diameter 300 mm swing diameter over face slide 150 mm x-axis 400 mm z-axis 285 mm spindle passage 32 mm spindle motor 7.5 kW spindle turning speed - stepless 8000 rpm c-axis 0.001° Turret positions 12-speed VDI 25 work piece power 1.2 kW toolpiece turning speed range 6000 rpm weight of the machine approx. 1.8 t dimensions of the machine ca. 2 X 1 X 1.6 m Additional information CNC CONTROL SIEMENS 810 D

Table dimensions: 2000 x 2000 mm Table height: 890 mm Table displacement: 1,200 mm Maximum table load: 20 tons. Electrics: 400 V / 50 Hz

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

Machine Details Warehouse number 1105-03703 Machine type CNC lathe - inclined bed machine Make SOMAB Type TRANSMAB 400 Year of construction 2002 Conventional control type Control NUM 1060 T Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WAREHOUSE Technical details Turning diameter 500 mm Turning length 650 mm Control NUM 1060 T Turning diameter above the face sled 240 mm Turning diameter via transverse guide 320 mm Main drive motor 18/24 kW Spindle speeds 3600 rpm Spindle passage 73 mm Chuck diameter 210 mm Tailstock cone MK 4 Total power requirement 30 kW Machine weight approx. 4 t Space requirement approx. 3.60 X 2 X 2 m Information Machine in inclined bed design with NUM 1060 CONTROL HYDRAULICK CHUK PARTS FAENGER SPAENEFOEDERER 12x revolver VDI 30

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)

Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min

Machine Details Stock number 1105-03735 Machine type CNC lathe Brand MAZAK Type QT 20 N Year of construction 1995 Control type CNC Control Mazatrol T PLUS Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 440 mm Turning length 451 mm Control Mazatrol T PLUS Turning diameter via bed carriage 300 Tailstock holder MK 4 Quill stroke 130 mm Tailstock displacement 500 mm x-axis 180 mm z-axis 510 mm Spindle bore 62 mm Speed range 12-4500 rpm Total power requirement 40 KVA Machine weight ca. 4,2 t Information WITH MAZATROL T PLUS Good Macschine All prices plus VAT. VAT.. Changes and errors in the technical details and information reserved.

Turning- and Distibution Built in: 2000; working condition

Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

Built in 2006 Speed bundles/min 40 Pakete/min Size packaged good width max 340 mm min 150 mm Size packaged good: height max 480 mm min 10 mm Size packaged good: length max 500 mm min 150 mm Size packaged good: diagonal max 600 mm Package weight: max 25 kg Electric supply: 400/50 V/Hz Speed: max ca. 24-55 m/min Weight: 150 kg (approx.) ; working condition

Long lathe with rod tube, see also picture

Lathe

Lathe

Lathe

see picture - on Anfr. More: Tornos M 7

12 stueck, see pictures

Curve lathe STROHM M45 - see pictures

Curve lathe SCHWERDTFEGER UA20 - see picture

Curve lathe INDEX B60 - not complete - as spare part dispenser - see pictures

Machine Details Stock number 1105-03806 Machine type CNC lathe - inclined bed machine Make MONFORTS Type RNC 400 AC Year of construction 2001 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from HAGUENAU FRANCE Technical details Turning diameter 420 mm Turning length 600 mm Control SIEMENS 810 D Speed range 70 - 4000 rpm Information With C axis and driven tool holders Tool carrier disc turret VDI 40 (12pcs), bore 40 mm; Power clamping futte DIA 315 MM, chip conveyor coolant device, TAILSTOCK CNC SIEMENS 810 D 24 KW 4000 RPM good condition WITH ACCESSORIES

Curve lathe INDEX ER60 - see pictures More: turnover machine MANURHIN Traminer TR22B

Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below