turn table used for sale

Fanuc 15 M control. 2x Pallets 1,600 x 1,800 mm. Pallet load 6 t. B-axis 0.001. X 3,300 mm. Y 1,800 mm. Z 1,300 mm W 700 mm. Eilgaenge X,Y,Z 10,000 mm/min. Drilling spindle diameter 130 mm. Spindle holder ISO 50. Spindle drive power 22/26 kW. Spindle speeds 5 - 2,500 rpm. tool changer. tool magazine positions 90 times. all-round cladding. ; Well

M. No.: 4028/20 Equipment / Additional information: G2.090.9041/03

Fanuc 15 M Control. 2x Pallets 1600 x 1800 mm. Pallet load max. 6t. B-Axis 0.001°. X 3300 mm. Y 1800 mm. Z 1300 mm. W 700 mm. Rapids to 10000 mm/min. Boring spindle diameter 130 mm. Spindle taper ISO 50. Spindle drive motor rating 22/26 KW. Spindle speeds 5 - 2500 rpm. Tool changer. 90 station tool magazine. Chip and splash guarding. ; Good

Little used and is very well maintained, factory No. 3791, in execution with degree - and indirect sharing using disc of part of. Table size 500 mm diameter Height 150 mm Length 710 mm 590 mm width (without drive) T - slot width 16 mm Gear ratio 1: 120 Weight 180 kg Accessories: Part of disc, operating instructions.

Round table FERGUSON Pt182RH15752 - see pictures

Hydraulic round table, for adaptations, etc.

Hydraulic round table with 4 stations, 800 mm

Hydraulic round table FIBRO P10400UN with 3 jaw holder, for adaptations etc. division: 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 96

Various round-stroke tables with clamping elements, for conversions or adaptations, etc.

Part table Eimeldingen S 630 ST with swivel axis

Table,stainless steel,L 1500 x W 1000 x H 1000 mm.

Press-Vite Buegel / Steam table 4 whirlpool hoods, 9000W Bj .2002, Pr12LP+ You buy a bell system Press Vite Buegel- / Steam table,with 4 hoe-adjustable whirlpool hoods, and 2 steam generators /en working width approx. 340 cm, 380VPr12LP - 9000W Bj 23.10.2002 Control GE VAT20 U20NOK7S BJ. 16.02.2002 Article number 17746; Please include requests;

Table scissors Wieger 6 / 30 year of construction: 1991 to 6 mm Immediately available

IMA-PG TR100 blister machine for tablets and capsules in PVC/Alu blisters, output up to 140 blisters per minute. Blister size range from 30 x 60mm up to 128 x 150mm, and up to 12mm deep, currently fitted with tooling for blisters 60 x 140mm. With Laetus checking system. With Multipack F42 blister stacker & stretch bander, up to 40 stacks per minute.

Section 0.61 .. 0.68 length of 1.6 m width 3.10 m length operating range: 1,5 m x 3,0 m 700mm high sided suction scope plasma 24 months warranty; new

Max cutting length: 2540 mm Max cutting rod: 4 mm steel Moto. Rear stop up to 750 mm side stop weight: 4000 kg

Many thanks for your interest on our new cooling table for chocolate or sugar-, candydough, please find follow our offer: cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 2000 x 1500 x 750mm Or : 2500 x 1000 x 750mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: - folded plates made of stainless steel - Standing on 4 feet, (square tube 80 x 80 x 5) - foldable edge from square tube 40x40, - 1 x safety valve 0.5 bar) - 1 x Pipes for water circulation I offer this machine as New machine

Pharma Technology DV1300 +VC vertical tablet/capsule deduster, output 50,000 to 2,000,000 pieces/hour.

1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855

Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg

Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg

Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg

Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck

Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 600 mm -Height approx. 270 mm -Plate thickness 20 mm -div. bores partially with thread -Gutters between top plate and base - weight jeweills approx. 100 kg

CROSS TABLE -Afmeting 600 x 240 mm -Panel verplaatsing 400 x 150 mm DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Type 6202RS Thread diameter 8 mm Wheel diameter 43 mm Wheel width 15 mm Total length 40 mm

Round table probably Walter with a diameter of 380 mm.

Packing table / Workbench massive execution Data: -H: 260 cm -L: 288 cm -T: 105 cm Price: â?¬950 net â?¬1130,50 gross You will receive an invoice with expelled VAT Our recommendation: Tell us your requirements... We assist you with the realisation of your projects, from planning to the order to Assembly. Delivery upon request by us possible.

Spindle diameter: 0 mm Cross X: 0 mm Vertical Y: 0 mm Table length: 0 mm Table width: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 1000 mm Table width: 810 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 770 mm Vertical travel (z axis): 670 mm Table swiveling + -: 360 ° Table load max.: 1200 kg Execution: Horizontal Longitudinal feeds: stepless from: 3000.00 mm/min Transversal feeds: stepless up to: 3000.00 mm/min Drill spindle diameter: 75 mm Drill spindle travel: 670 mm Spindle speeds: stepless from: 10 rpm up to: 1200 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 11 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 3970 mm Width: 2600 mm Height: 2980 mm Various accessories: Tool cabinet Rotary table dimensions:: DIXI 450 P Diameter: 450 mm Set of boring head

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Built in 1984 Good condition

Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg

Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders

Under table saw Wadkin Cutting width 300 mm Cutting height 80 mm pneumatically raised with rolling table and stop L 2.0 m L x W x H: 2.5 x 0.8 x 1.1 m Weight approx. 480 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Retrofitted in 1998 and revised in 2012 by SIRMU Technical datas: Stroke: 2000 mm Inclination of the platform: 0-60 ° Rotation: 360° Table diameter: 4.500 mm Maximum table load: 50,000 kg Plate diameter: 2.250 mm Movement 4 stages 1 28 mm / min 2 100 mm / min 3 280 mm / min 4 560 mm / min tilting of the table: 0-60 ° 4 stages 2 0.7 ° / min 3 2 ° / min 4 4 ° / min 5 7 ° / min Rotation of the table 4 stages 1 270 mm / min referring to a diameter of 3,500 mm 2 890 mm / min 3 2,700 mm / min 4 5,400 mm / min Total weight: 90,000 kg

Spindle diameter: 0 mm Cross X: 0 mm Vertical Y: 0 mm Table length: 0 mm Table width: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Longitudinal feeds: from: 10 mm/min up to: 1600 mm/min Transversal feeds: from: 10 mm/min up to: 1600 mm/min Taper in spindle: MT: 7 Way of the drill slide: 600 mm Drill spindle diameter: 180 mm Drill spindle travel: (Z) 1500 mm Spindle speeds: from: 3.15 rpm up to: 630 rpm Spindle feeds: from: 4 mm/min up to: 630 mm/min Rapid traverse:: 2.5 m/min Milling head:: Ø 260 mm Machine´s weight about: 53000 kg Overall dimensions machine: Length: 8500 mm Width: 5800 mm Height: 9200 mm Various accessories: Rotary table diameter: 2000x2000 Skoda E20 mm

Plate warmer. Dish warmer. Heating cabinet, Plate warmer Brand: Lowerator Type: 2SHE For plate 26cm diameter Number of pieces: 2 Other details: Please see photos All information without guarantee

This electrically driven sinusoidal table has an incremental angle measuring device (Heidenhain RON 705). -Sinusoidal table for workpiece clamping -Swivel range 0 - 110° -Clamping surface 800 x 600 mm -Groove width 22 mm -Groove spacing 100 mm -Number of grooves:6 pieces -Dimensions: Length: 840 mm Width: 760 mm Height: 220 mm Clamping angle, clamping angle, clamping tower, clamping device, About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm The displacement measurement is carried out via a rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overha ...

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping area: 1400 mm x 1400 mm Total height: 319 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 140 H6 mm Condition: Very good (used) Optional with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

sed Manesty Rotapress MK IIA rotary tablet press, 45 station, double sided, with pre-compression, keyed upper punches, With feed hoppers, force feeders, controls and associated parts.

Technical data Table length: 1880 mm Table width: 915 mm Longitudinal travel (X-axis): 1540 mm Cross travel (x-axis): 1285 mm Vertical travel (z axis): 985 mm Table load max.: 7000 kg Drill spindle diameter: 102 mm Drill spindle travel: 760 mm Spindle speeds: from: 10 rpm up to: 1300 rpm Integrated rotary table 4.axis Length: 1520 mm Width: 1220 mm axe rotatif table tournante: 360 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 18000 kg Overall dimensions machine: Length: 4850 mm Width: 2820 mm Height: 2920 mm Various accessories: Digital readout number of axis:: 3 Manufacturer: Heidenhain Set of cutter arbors

Number of punch stations 35 , output tablets 210,000/h , max. tablet diameter 13 mm , max. filling depth 18 mm , max. tablet thickness 8,5 mm , max. compression force 100 kN , max. initial compression force 20 kN , dieplate speed 15-100 rpm .

Rotative tablet press of 27 stations Max. diameter of the tablet 16 mm Filling depth 18 mm Pressing capacity 80 Kn Prepressing capacity 20 Kn Production from 48.000 to 100.000 h Dimensions : 1.000 x 950 x 1876 . Weigh 1850 Kg. Force feeder Type of tool : B

Number of punch stations 55 , output tablets 594,000/h , max. tablet diameter 13 mm , max. filling depth 18 mm , max. tablet thickness 8,5 mm , max. compression force 100 kN , max. initial compression force 20 kN , dieplate speed 15-90 rpm . Dimensions of the machine : 1490 x 1230 x 2100 , weight approx. 3750 Kg

Tablet press Fette P2000 Tablet output: 250.700/h mechanical speed Number of station: 43 stations Tablet diameter max: 13 mm Compression force max: 80 kN Initial compression force: 20 kN Type of tool : EU Norm BB Height of the machine with filling hopper : 1950 mm Project floor area : 1212 x 1126 Weight: 2200 Kg Year of manufacture :1993

Tablet output: 234.000/h (mechanical speed) Number of station: 37 stations Tablet diameter max: 25 mm Filling depth : 21 mm Die plate speed : 25 – 100 RPM Compression force max: 100 kN Initial compression force: 10 kN Type of tool : EU Norm D Height of the machine with filling hopper: 2135 mm Project floor area: 1260 x 1280 Weight: 2840 Kg

X 2000 mm Y 1700 mm Z 1250 mm W 730 Spindle diameter 110 mm kwW/Nm (S1) 19.5/951 3000 U/min Table 1400 x 1600 mm, table load 10 t T-grooves 22H8 Control HH 640 HR 510 ATC 40 H Coolant 70 bar on the power unit, with paper belt filter and oil separator Fixed cabin Spindle support 250 mm ISO 50 Immediately available!

X 4000 Y 2500 Z 1500 W 800 Spindle diameter 130 mm kwW/Nm (S1) 4pinacles 2099 3000 U/Min. Table size 2000 x 2400 mm, maximum table load 20 t T-grooves 22H8 HH 640 HR 510 Movable cabin Z800 Y1800 Spindle support 250 mm ISO 50 Immediately available!