tur lathe used for sale

Unchecked

Key data: 1250 mm, 900 mm, 8000 mm

The largest diameter of the processed product in mm: above the bed 1250 above the caliper 900 Distance between centers in mm 8300 The largest weight of the installed product in kg is 30,000 The number of spindle speeds is 3 The limits of the number of revolutions of the spindle in minutes are 3.15—200 Number of pitches: longitudinal 18 transverse 18 Feed limits in mm/rev: longitudinal 0.16-8 transverse 0.1-5 Number of calipers 2 The angle of rotation of the upper part of the caliper is ±90 degrees The power of the main electric motor is 60 kW Dimensions of the machine (length X width X height) in mm 15200X2500X2060 Weight 53.4 tons

Used machine in good condition. Available for immediate delivery. - Power source : 80 kVA - Axes: 5 - Control: SIEMENS 840D

Spindle nose: Camlock D1-6, Machine equipped with: (1x) Sony digital readout, Type: LG10-2 with X and Y readout, (3x) chuck, (1x) tailstock.

Including various accessories

Used machine in good condition. Available for immediate delivery. - Control: SIEMENS 840 D - Axes: 2 - Cutting feed rate (X x Z): 0.1 - 3.000 mm / min - Power of driven tool: 37 kW - Weight: 25 t

CNC lathe for metal part turning operations. CNC Control: Heidenhain Turn Plus Axes: 2 Axes

Technical characteristics: Control type: FANUC Number of pins: 2 Chuck diameter: 2 x 165 mm Number of tools per turret: 2 x 10 Maximum speed: 3,500 rpm X/Z Fast Forward: 24 m/min X/Z axis travel: 190 / 170 mm

Used machine in good condition. Available for immediate delivery. - Power source : 30 kVA - Control: CNC HEIDENHAIN TMC 530 - Tool magazine capacity: 20 # - Maximum tool diameter ?: 65 mm - Weight: 7.5 t

Used machine in good condition. Available for immediate delivery. - Control: SINUMERIK 880 T 3 - Max. length: 400 mm - Tool-holder cone: CONO ISO 50 - Tool magazine capacity: 16 #

ul> Distance between heads: 3000 mm Diameter above the bench: 800 mm Lathe equipped with a fixed bezel Digital visualization MINILEXPRO 3-jaw chuck Manual tailstock Lots sold as is, unchecked, without tools or tool holders.

Clamping claw chuck 250mm diameter, automatic thread cutter

Turning diameter above carriage 180mm.

Used machine in good condition. Available for immediate delivery. - Power source : 70 kVA - Control: SINUMERIK 880M - Driven tool speed: 6.000 rpm

Used machine in good condition. Available for immediate delivery. - Spindle power?: 28/21 kW - Control: 840 D SIEMENS - Axes: 5 - Workpiece diameter: 240 mm - Max. spindle speed: 5.000 rpm - Stroke (X): 190 mm - Stroke (Y): 40 mm - Stroke (Z): 555 mm - Maximum tool diameter ?: 200 mm - Main spindle bore: 79 mm - Weight: 6.500 kg

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 4 - Spindle power : 15 kW - Spindle power : 5.5 kW - Cutting feed rate (X x Z): 205 x 580 mm / min - Max. spindle speed: 4.500 rpm - Weight: 4.500 - Dimensions (long x wide x high): 2.997 x 1.592 x 1.740 mm

Spacing : 2000 mm Permissible diameter on bench : 720 mm Diameter on straggler : 430 mm X stroke : 410 mm Z stroke : 2000 mm Spindle speed : 1 – 1800 rpm Spindle bore : 106 mm Spindle nose : DIN 55027 size 11 Installed power : 28 kW Power supply : 400 V Lots sold as is, unchecked, without tools or tool holders.

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 4 - Spindle power : 15 kW - Spindle power : 5.5 kW - Cutting feed rate (X x Z): 205 x 580 mm / min - Max. spindle speed: 4.500 rpm - Weight: 4.500 - Dimensions (long x wide x high): 2.997 x 1.592 x 1.740 mm

CNC lathe for metal part turning operations. Numerical control: Fanuc 18T Axes: 3-axis Turret: 12 fixed positions + 6 rotating positions Chuck: Ø 200 mm (possibility of mounting clamps in the spindle) Distance between tips: 350 mm Spindle speed: 4,000 rpm Spindle passage: 51 mm

(3x) Lathe chucks (3- and 4-jaw) with loose jaws and accessories.

turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipped with chuck Ø250mm Manual available

With pallet accessories.

Equipped with various turning parts, spindles, and clamps for lathes

faceplate diameter: 1800 mm turning diameter over slide rest: 2500 mm turning length: mm Control: FAGOR 8050 T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm floorplate 3250 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible.

turning diameter over bed: 400 mm turning diameter over slide rest: - mm turning length: 1000 mm total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,511,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mm spindle passage: 23 mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 1500 mm control: FanucSystem 6 T total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4x2x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 320 mm turning length: 750 mm control: Siemens type: 810DL CCUO turning diameter over slide rest: 150 mm cross movement: 185 mm spindle passage: 52 mm turning speeds: 14-3550 U/min transmission ratio: 2 quill stroke: 120 mm rapid traverse: 6 m/min main drive motor: 7 kW 3-jaw-chuck diameter: 200 mm total power requirement: 10 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,6x1,44x1,44 m 8950 turning hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

faceplate diameter: 1320 mm swing diameter: 1400 mm turning height: 800 mm workpiece weight: 6000 kg cross rail adjustment: 800 mm Tools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 D transmission ratio: 3 daylight table - ram: 950 mm slide adjustment: 750 mm total power requirement: 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,5x5,5x4,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1100 mm turning length: 6000 mm control: Siemens 840D turning diameter over slide: 740 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Die Maschine ist Überholt und hat eine neue Steuerung The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: max.: 4000 mm turning diameter over slide rest: . mm turning length: 7500 mm speed: 0-750 u/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1100 mm swing diameter: 1250 mm turning height: 1300 mm Control: Siemens type: 805 workpiece weight: 4000 kg Tool changer: 10 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2200 mm turning diameter over slide rest: 2200 mm turning length: 10000-11000 mm control: Sinumerik 840 D workpiece weight: 70.000 kg faceplate: 2000 mm steady: 2 Torque: 125000 Nm feed: 0,3-4000 mm/min rapid traverse: 4000 mm/min roll stand: total power requirement: 110 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 22x6,2x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 8000 mm speed: 800 U/min spindle passage: 105 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1000 mm turning diameter over slide rest: 640 mm turning length: 6300 mm turning dia. in gap: 1250 mm spindle diameter: 50 mm speed: 6-925 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1150 mm turning diameter over slide rest: 800 mm turning length: 6300 mm spindle diameter: 100 mm speed: 4-800 (x24) U/min turning dia. in gap: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.