128,265 used machines on RESALE, but how to find them? Machine Search
turning length: 220 mm control: Fabnuc OSPL 500 L turning diameter: 150 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning diameter above carriage 180mm. Auction-ID: A1-45188-69
turning diameter over bed: 280 mm turning diameter over slide rest: 158 mm turning length: 600 mm turning speeds: 45 - 2000 U/min centre height: 140 mm spindle bore: 26 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,25 - 2,5 mm thread - inch: 6 - 96 TPI connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck - 4-jaw chuck - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1400 , 1000 , 11280
SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW
Equipped with digital display, emergency stop Auction-ID: A1-41992-86
Details Machine no. 2042.6616-05 Year of manufacture 2004 Circumferential diameter over bed 1,000 mm Circumferential diameter over bed 1,000 mm Center height over flat web 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Three-phase motor infinitely variable (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control system Manualplus 4110, completely renewed about 1 to 2 years ago 2 Lynettes Equipped with rotary power chuck, diameter approx. 500 mm. Including a lot of accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix base holders, size D. Machine was equipped with a separate milling device, with its own control system, value approx. € 20,000.00. Only served by the owner, ver ...
turning diameter: Ø30/300mm mm turning length: 3055mm +/-0.3mm mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max 300 mm turning length: max. 2000 mm control: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min. number of tools: 8 quill stroke: 300 mm diameter of quill: 105 mm taper MK: 6 coolant tank: 100 l total power requirement: 15 kW weight of the machine ca.: 4650 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%): ...
Control Manual Plus Turning diameter 260 mm Circumferential diameter 475 mm Center width 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parachute holder Tailstock
Description Cycle lathe Chevalier FCL-2660 Details Year of construction 2008 Machine no. A40307 C52 Height 2,150 mm Width 2,100 mm Length 3,900 mm Bed width 450 mm Bed height 1,000 mm Bed length 3,600 mm Face plate Ø 620 mm Forkardt Chuck Ø 315 mm Max. workpiece lengths 1,800 - 2,000 mm Turning diameter over bed 660 mm Turning diameter over support 400 mm Center height 330 mm CNC Fagor Cycle Control Lynette Ø 400 mm Outer and inner bolsters
Description Cycle lathe Chevalier FCL-2460 Details Height 1,950 mm Width 1,600 mm Length 4,100 mm Bed width 410 mm Bed height 850 mm Bed length 2,300 mm Face plate and chuck possible by arrangement max. workpiece lengths 1,500 mm Turning diameter over bed 600 mm Turning diameter over support 360 mm Center height 300 mm CNC Fagor cycle control function untested Lynette possible by arrangement 4-speed revolver
turning diameter:1390 mm turning length:14000 mm weight of the machine ca.:13 t More information can be found in the Appendix.
turning diameter: . mm turning length: . mm control: . turning diameter: . mm turning length: . mm swing diameter over bed slide: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BOEHRINGER VDF V 800 universal lathe was built in 1977 in Germany. The machine, designed for precision machining of workpieces with a maximum diameter of 800 mm and a length of 1500 mm, is distinguished by its robust construction, which ensures excellent stability during even the most intensive challenges. On the other hand, the spindle features an optimised speed range, allowing efficient turning using both high-speed steel and carbide-tipped tools. All of this makes the BOEHRINGER lathe the perfect choice for both unit and series production. The total weight of the machine is approximately 5400 kg. Technical specifications of the BOEHRINGER VDF V 800 metal lathe - maximum turning diameter above the bed: 800 mm - maximum turning diameter over the slide: 515 mm - maximum turning length: 1500 mm - maximum spindle rotational speed: 1120 rpm - minimum spindle rotational speed: 5.6 r ...
number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW
number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:8,6 t spindle drive motor:11 kW
turning length:400 mm total power requirement:45 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,58 x 1,91 x 2,05 m spindle passage:45 mm
turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m
turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories
turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min
turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Takang Machine no D895 Type TR1200x6000 Year of make 2015 Oil country Lathe Distance between centers 6.000 mm Center height 600 mm Turning diameter above the bed 1.200 mm ø Turning diameter above the support 890 mm ø Passage 150 mm ø Bed width 560 mm Glasses 400 & 550 mm 4-Jaw Chuck 1.000 mm ø Digital readout Heidenhein Power on the top support Rapid traverse along and transverse movement 3 lane bed Machine size (lxwxh) 8.500 x 1.700 x 2.300 mm Machine weight 13.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter:650 mm turning length:1.500 mm chucking diameter:400 mm
turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm shaving-spindle speed range:40 - 3.000 U/min dimensions of the machine ca.:2 x 1 x 1,6 m total power requirement:6 kW weight of the machine ca.:1,2 t
turning length:800 mm total power requirement:380 V weight of the machine ca.:1400 kg dimensions of the machine ca.:2200 x 1200 x 1300 m centre height:160 mm chucking diameter:150 mm
turning diameter over slide rest:280 mm turning length:4000 mm total power requirement:7,8 kW weight of the machine ca.:6 t dimensions of the machine ca.:5,9 x 1,9 x 1,40 m
turning length:140 mm dimensions of the machine ca.:4 x 2 x 1,9 m
turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm spindle turning speed range:40 - 3000 U/min total power requirement:6 kW weight of the machine ca.:1,2 t dimensions of the machine ca.:2 x 1 x 1,6 m
turning diameter over bed:930 mm turning diameter over slide rest:630 mm turning length:6000 mm turning dia. in gap:1250 mm spindle bore:95 mm turning speed range:8 - 800 U/min total power requirement:25 kW dimensions of the machine ca.:9 x 2 x 1,9 m faceplate 2 steadies coolant attachment taper turning attachment
turning diameter over bed:3800 mm turning diameter over slide rest:3200 mm turning length:12000 mm faceplate turning speed range -stepless-:2 - 200 U/min max. workpiece weight:90.000 kg bed width:4000 mm 2 steadies
Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Specifications: height of tips on the bench 700mm Height of tips on carriage 520mm Distance between closed bench centers 4,000mm Distance between drills with extended bench 6,000mm Extended Bench Drill Height 1,100mm mobile bed stroke 2,000mm 150mm bar passage various accessories available (plateau, chuck, steady rests, tailstocks,...) Supplied machine books 2-axis dimension display MACHINE IN EXCELLENT CONDITION
CNC control: MSX-850 III Number of axes: 2 Strokes: X = 260 mm, Z = 590 mm Spindle speed: 50 – 5000 rpm Power: 15 kW Bar capacity: Ø 65 mm Spindle bore: 73 mm Turret : 12 stations (BMT) Max turning diameter: 356 mm Max turning length: 510 mm Chip conveyor: yes 235L high-pressure pump: yes Lots sold as is, unchecked, without tools or tool holders.
machine is already ready for transport and can be assessed on viewing day
Center height 165 mm, center width 635 mm, spindle bore approx. 40 mm, power 2.2 kW
Max. turning Ø180 mm X-Axis 110 mm Z-Axis 300 mm Spindle bore 52 mm ATC / Revolver 12 Pinole taper 3 Mk Stroke pinole 40 mm machine ready for transport and to be assessed on viewing day
maximum number of results exceeded
please refine your search
1.000 € 
