tur lathe used for sale

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 863.32 € : 1 : 45200 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accordin ...

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of Manufacturing: presumable 2018

The machine is equipped with a tool holder, a tailstock, and a 3-jaw chuck, diameter: approx. 310 mm. • centre distance over bed: 300 mm • centre distance over support: 200 mm

Includes a 3-jaw chuck, jaw width: 250 mm, tailstock, Multifix basic holder as well as a 3-axis digital readout and a workbench with matching Multifix tool holders and two jaw chucks, indexable inserts, collets, and milling cutters. Additional technical specifications: • Center height over bed: 200 mm • Center height over support: approx. 110 mm • Center height over cross support: approx. 90 mm

• centre length: 1000 mm • centre height over bed: approx. 250 mm • centre height over support: 150 mm • Incl. steady rest.

The machine is equipped with a tailstock, a Multifix tool post, and a quick-action chuck, including a 3-axis digital readout system manufactured by FAGOR.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of manufacturing: presumable 2018

: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2011 : 010192 : prompt, Zwischenverkauf v : Deutschland : 24100 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 80 - 2 Gänge/ : 0.2 - 4 : 200 - 5 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 720 kg Heidenhain 3-axis digital readout NEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments) Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and com ...

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current cond ...

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 22100 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 80 - 2 Gänge/ : 0.2 - 4 : 200 - 5 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONES ...

Equipped with automatic rod loader FMB 3200, length maximum 3200 mm, maximum diameter approximately 23 mm; machine disassembled for transport size 2400x1200x1750 mm and 4700x700x1300 mm; Auction-ID: A1-44050-8

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: 1-drive unit / 1-loose unit 2012 overtaken max. load: 10 to Container diameter: 1000-5000 mm Roll diameter: 540 mm Roll width: 600 mm

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

TURNING ANGLE: 180°, BILLET SIZE: QUADRATE: MAX. 240 MM, SQUARE: MAX. 210 x 250 MM, U & I FORM: MAX. 400 MM, WEIGHT: MAX. 5500 KG,

HAVE A GDY SIR; WE VE NEW UNUSED NAPIER NA 295 TURBOCARGER AS COMPLETE. PLS FIND SPEC AT BELOW. INLET HAS 4 HOLES NAPIER: 295 FRAME LETTER: JH SPECIFICATION: J793 SERIAL NO.: 710083 MAX SPEED: 31000RPM MAX TEMP: 650 C. ALTERNATION NO.: 13678910 SUPLIED ON 28-10 - 2013 AIR FILTER ELEMENT DTLS 75155/248179/2 EJ5385 Issue 4 IT IS STOWED AT ORIGINAL WOODEN BOX. NEVER USED. READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO EMERGENCY HRSITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Turbocharger 4LG in Exchange

Carrier Turbo Cold Water Kit, 19XR5251467, Y.O.M. 2800KW cooling capacity, from 20%-100% adjustable, latest model, very efficient, very good condition, ready to use immediately.

Volume: 1000 ltr. Material: mild steel

Turbocharger 4MF in Exchange

Turbocharger in Exchange TD 13

Turbocharger in Exchange TD 15

Woodturning machine DB 1100 new 230 V 0.75 kW 50 Hz Top distance of 1100 mm Tip height 179 mm Machine bed, base, tailstock made of cast iron Speed control of 500-2000 RPM MK2/M33 Spindle stock 90 ° swiveling ideal for large diameter! Weight 92 kg G & pieces 5921100

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW

Turbocharger in Exchange Garret

Turbocharger in Exchange get set

Turbocharger - recon

Turbocharger - recon

Turbocharger - recon

Rotary actuator DW100, DIN, F07/10, 8kt. 17, ATEX pneumatic, double acting Manufacturer: End fittings Type: ED621002/AX Serial No.: 534623 / 41977 According to Directive 94/9/EC (ATEX) The Max Media and ambient temperatures may following individual temperature classes Values do not exceed: 65 ° C at temperature class 6 80 ° C at temperature class 5

FOR SALE NEW UNUSED ABB VTR 254-11 COMPLETE TURBO CHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED ORIGINAL ABB VTR 254-11 COMPLETE TURBO CHARGER WITH ORIGINAL PACKAGE IN WOODEN BOX AT OUR STOCK. PLS FIND SPECT AT BELOW.. TYPE VTR254-11 HT 841632 t Mmax 680 C t Bmax 650 C N Mmax 523 N Bmax 497 SFUS01 YOB 2015 WEIGHT 650KG EX OWNER SUPLIED FROM WARTSILA. MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

see picture - on Anfr.

Carrier 19XR7070LF475, Centrifugal Chiller Year 2009, 300 h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens soft starter, R134a, high efficient machine, 400V 50 Hz, Commissioning and service, for sell, for rent, for contracting, world-wide, ready for shipping

RECON Part number: 1227 8540 V8 KKK 5333 970 7101 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Typ VTR 251 2H HT 429278 / Specification SGE 02 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

2006 completely rebuilt Clamping surface: 1,800 x 1,800 mm Table height: 800 mm Maximum table load: 20 tons. Table displacement: 850 mm Electrics: 400 V / 50 Hz

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : roundtable / turntable diameter : 800mm / 1000mm/1200mm/1400mm/2000mm electrical : 230 VAC / on request 400V/3ph - Legs adjustable - Stainless steel construction - Speed control with frequency converter - CE confirmation - Manual and electr. draw - driven with geared motor - edge high 30mm The base frame has a support for the lift truck transport I offer this machine in NEW condition Round table in Stainless steel Ø mm Round table 800 Round table 1000 Round table 1200 Round table 1400 Round table 2000 Example fotos, with additional parts

Table dimensions: 2000 x 2000 mm Table height: 890 mm Table displacement: 1,200 mm Maximum table load: 20 tons. Electrics: 400 V / 50 Hz

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 MADE IN SWITZEWRLAND BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 MADE IN SWITZERLAND IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

In very good condition

Make:IHI, BBC Type: VTR 401 Two Inlet

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

Status: New Manufacturer: Pfeiffer Type: TMH 064 Mod.-Nr.: PM P02 366 Remark To operateonly with appropriate pre pump and control. delivery time: on request; ready for use

1 X ABB CAT TURBO CHARGER. RECONDITIONED FOR CAT 3516C & 3520C Gas engine CAT PART NO: 254-0789

Turbocharger from a Jenbacher 312 Manufacturer: ABB, RR131-14 Used Can we create a range of overhaul.

Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch PN. pressure max. 8 bar Load max 8 kg Weight robot 51 kg + Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see picture Since the article is available several times and the robots carry different working tools these are only sample pictures and may differ. Item condition used (Changes and errors in the technical data, information reserved!) In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please  ...

Turning- and Distibution Built in: 2000; working condition