We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,106 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Control : Heidenhain Peak height 260 mm Tip width 1500 mm Turning over bed 520 mm Turning diameter via slide 310 mm Travel -Z Axle 1250 mm Travel -X-axis 270 mm Width of the lathe bed 400 mm Spindle holder CL 8" Spindle bore 110 mm Spindle speeds 0 - 2000 rpm. Rapid speed X/Z 5 m/min Pinien travel by hand 220 mm Pinole diameter 80 mm Pinole holder MK 5 Total installed power 18 kW (Electronically reduced) Engine hours 1828 h
Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.
used
Used pliers gripper with segments A.S. and B.S - suitable for Heidelberg Era Speedmaster SM74 - for semi-automatic and fully automatic turn - Plier sgripper v.Bj.2017 - without damage and breakpoints - continuous run 100% accurate - Lagerboks have no game - Curve rollers and needle bearings v. segments kpl.renewed - 100% functional
used
No.: 95-1523 Y.O.M.: 1995 Power: 2.5 kW new tools Dimensions LWH: 1300 x 300 x 300 mm Weight: approx. 100 kg
used
No.: 01-3926 H Y.O.M.: 2001 speed-controlled via FU Power: 3 kW Tool shaft with bayonet clasp, removable, new spare shaft very good condition Dimensions LWH: 1400 x 400 x 450 mm Weight: approx. 100 kg
used
Capacity max Kg: 400 Total connection KW: 1.1
used
Turning + Thread cutting semi-automatic M32 The machine was never used for production. Suitable for internal and external threads max. diameter 90 mm max. turning length 45 mm max. thread pitch 1.5 mm max. thread length 14 mm Max. Thread pitch multi-speed 3 mm largest thread length multi-speed 21 mm Drive motor approx. 3 hp Machine weight 800 Kg
used
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...
used
Rotary table E20 Table working surface 2000x2000mm Table height 910 mm The biggest load of the workpiece table 200000N Movement for sleigh bed 1200 mm Longitudinal feed 2,8-8-22.4 mm min-1 Circular shift on average of 2000 mm 5.8-16.4-48.1 mm min-1 Rapid longitudinal 1245 mm min-1 Rapid circular diameter of 2000 mm to 2600 mm min-1 4kW electric engine for the displacements Floor surface 3000x2765mm Table weight 9350 kg
new
TTMC WELDING TABLE TYPE WP500 - Capaciteit horizontaal 500 kg - Capaciteit verticaal 250 kg - panel afmeting 550 mm - Electrically kantelbaar - Voetpedaal - Documentatie - 230V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Thread cutting gear Pick-up device partially revised
used
Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide
used
Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle
used
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
used
Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer
used
Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...
used
Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer
used
Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide
used
Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...
used
Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past
AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.
used
Face plate diameter: 4200mm Swing diameter: 4950mm Turning height: 3000mm Ram: 300mm x 300mm (Z-Stroke: 2100mm) Workpiece weight: max. 30t Accessories: PickUp station Control 840D Sl Machine was completely overhauled, machined and rebuilt.
used
CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg
used
Turning machine Tip height 160 mm Tip width 1000 mm 3 speeds Flat disc diameter 190 mm Beitel auflage Power connection 380 volts Dimensions 1460 mm x 900 mm x H 1100 mm
used
Turning diameter: 1250 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW CNC Brand: Siemens Rail track gauge 1,435 mm Max. wheel tread Ø 1,250 mm Min. wheel tread Ø 650 mm in work : 09/2016 Rail Profile : S54 ( retractable rail ) UIC tread patterns : 80- 145 mm Max. wheel flange height : 45 mm Max. load per wheel &n ...
used
51 MW - CCGT comprising 3 x 12 MW Solar Gas Turbine generator and 1 x 15 MW steam turbine generator Model : TITAN 130 Capacity : 12 MW Voltage ; 11 KV / 50 Hz Qty : 3 sets Titan 130 + 1 set STG Year : 2012 Running hr : 6000 hrs since new
used
Complete 48 MW Westinghouse W251-B11 Gas Turbine with a Brush electric generator, 3000 rpm, 50 HZ, 11.5 KV,
used
3 re-lathes, see pictures
used
various accessories / spare parts for Tornos AS 14
used
Round-clock table
used
MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II
used
Turning diameter: 820 mm Turning length: 2000 mm Spindle bore: 0 mm Motor power: 0 HP/kW MACH-id 5413 MAKE VDF Boehringer TYPE DUE 800 YOP 1994 SPECIFICATIONS Centre height 410 mm Grinding Ø 820 mm Grinding length 2000 mm Grinding stone dimensions 250 x 50 mm Grinding stone speeds 10.000 Rpm Table inclasement 60 ° DIMENSIONS Length 5500 mm Width 2400 mm Height 2200 mm Weight 8000 kg
used
Machine is in good condition. Machine has a semi-spindle and it does not have a chip-federal.
used
Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.
used
CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet
used
Pressure: 20 t Sheet length: 0 mm Sheet width: 0 mm Positions ATC: 20 CNC Brand: Siemens CNC Model: 810 MACH-id 5198 MAKE Beyeler Raskin TYPE RT 210 / 12 YOP 1995 SPECIFICATIONS Table load in kG 400 Kg Working area X Axis 1270 mm Working area Y Axis 1016 mm Working area X Axis with override 2540 mm Punching force 20 T Maximum sheet thickness 6 mm Turret position 20 / 5 BIG Auto indexing positions 5 Positioning speed X and Y Axis 85 mm/min. Change speed revolver ...
used
Pressure: 20 t Sheet length: 0 mm Sheet width: 0 mm Positions ATC: 20 CNC Brand: Siemens CNC Model: 810 MACH-id 5197 MAKE Beyeler Raskin TYPE RT 210 / 12 YOP 1994 SPECIFICATIONS Table load in kG 500 Kg Working area X Axis 1270 mm Working area Y Axis 1016 mm Working area X Axis with override 2540 mm Punching force 20 T Maximum sheet thickness 6 mm Turret position 20 (2 BIG) Auto indexing positions 2 Positioning speed X and Y Axis 85 mm/min. Change speed revolver 40 Rpm Contro ...
used
MACHINE IS IN GOOD WORKING CONDITION Machine need center horse and support for the clamp cutting tools. Bj0ie7dcoa Machine Has ben used in Switzerland, after thay realize they need that both suports, they took it off and use on other lathe.
used
Available for Sale ! ABB Turbo Charger Type: TPS57 F32 For Jenbacher J620 Condition: Used Excellent
used
CNC Lathe with indexing chuck ( Autoblock) SPINNER TC400 52
used
ABB turbocharger type RR151-14 for the DEUTZ TBD620V12 both are completely over-hollowed
used
Turning diameter: 1040 mm Turning length: 2000 mm Spindle bore: 130 mm Motor power: 25 HP/kW MACH-id 5054 MAKE EST Ticino TYPE ET 520 YOP 1988 SPECIFICATIONS Swing over bed Ø 1040 mm Swing over cross slide 710 mm Distance between centres 2000 mm Power 25 Kw Spindle bore 130 mm Spindle speeds / ranges 600 Rpm Bed width 600 mm Work piece weight 8500 kg DIMENSIONS Length 5100 mm Width 2350 mm Height 1800 mm
new
maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.
used
CNC Lathe Gildemeister CTX 200 Series 2 Immediately free from location: CNC Lathe Gildemeister Type CTX 200 Series 2 Built in 2001 Operating hours 39,000 CNC Control Heidenhain 4290 TP Turning diameter 210 mm Turning length 305 mm Reiststock revolver 12 driven tools Conveyor Bar loading magazine Max travel plan 160 mm Max travel length 350 mm Spindle speeds up to 5000 rpm 2 simultaneous axes with C axis 1 controlled spindle 12 driven tools Collet pliers with hydr. Hollow clamping device up to 43 mm Workpiece pick-up device up to 56 mm very many tools
new
maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.
used
Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals
used
MAKE:BBC TYPE:VTR 320U NO 82230 SPECIFICATION:Z8 S439 IV 178 N. Max:17500RPM TEMP:650 deg.C One Inlet
used
Make: NAPPIER Type: HP 200 Serial Number: 204/7839/20EF , 204/7417/20EF RPM: 21600 / 23000 Temp.: 1200 DEG. F Patient application No.: 20105/48
used
MAKE:BBC TYPE:VTR354A-32 SERIAL NO.:396879 T MAX:580°C N MAX:365 SPECIFICATION:V 03131 B 061 H 04111 W 54110 E 03318 U 032 L 181 T 111
used
Machine details Bearing number 1105-03132 Machine type CNC lathe - slantbed machine Made GILDEMEISTER Type CTX 400 Built in 2000 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time SOFORT Freight base from location, free loading truck Technical details Turning diameter 570 mm Turning length 635 mm Control Heidenhain CNC Pilot 4290 Turning diameter over bed slide 420 mm Spindle speeds - infinitely 25-5000 rpm Number of driven tools 6 mm Drive 5 kW Information CNC Heidenhain Pilot 4290 C-axis with 5 FESTE vdi holders 1 3 BAKE FOOD 1 X SPAENEFOERDERER WITH REITSTOCK + LNS STANGEN VORCHUB