tur 50 2000 used for sale

For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.

Key data: 480 mm, 2000 mm, 3050 1/min

Stock number: 4009 CNC LATHE Manufacturer: Gildemeister , Type: CTX 600 Machines NO.: 361238, Year of manufacture: 1997 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 650 mm Dia. Turning length 2000 mm Main motor power 27 kw Main spindle speed range 4-3050 rpm Tool turret with 12 stations Powered stations revolver 1 6 pieces. Control Gildemaister EPL Fabr. Accessories: Hydr. Chuck main spindle 400 mm dia Tool holder vdi 50 Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 15 Chip conveyance. Cooling water system. Length: 4000 mm, Height: 2100 mm, Width: 2500 mm, Weight: 9100 kg

FOR SALE GAS TURBINE Tempest SGT300 packaged 7941 kva year 2000 50 HZ VOLT 11 000

Lathe Pinacho smart turn 6 BJ 2006

General Manufacturer: Citizen Type: Cincom R 07 VI Year of Make: 2012 Control: Citizen Cincom Number of axles: 6 Turning diameter: 7 mm Turning length: 40 mm Thread diameter: 4 m Spindle passage: 12 mm Spindle Speed: 0 – 16,000 rpm Spindle power: 1.1 kW Sub-spindle Speed: 0 – 10,000 rpm Pick-up length: 40 mm C-axis: 1° Tapping diameter: 3 m Tool Carrier Quantity: 2 Number of stations: 13 Turning tools: 5 Drilling tools: 4 Tool shank cross-section: 8 mm Counter-processing Number of tools: 4 Drive Connection 50 Hz 3x: 400 Volts Sub-spindle power: 0.5 kW Total power requirement: 4 kVA Dimensions and weight Dimensions: 1,465 mm x 560 mm x 1,410 mm Weight: approx. 950 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Pneumatic workpiece extraction LNS Tryton 112 Rother mini ...

General Manufacturer: Spinner Type: TC800-110-MCY Year of Make: 2009 Control: Siemens 840D SolutionLine Travel: X 360 mm Z 900 mm Y -55/+65 mm Switch-on hours: 22,551 h Working spindle Speed: 3,200 rpm Power: 28/35 kW Torque: 175/875 Nm Tool/movement Tool holder: VDI40 Tool turret: 16-speed Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: C-axis for spindle incl. software option "Transmit" Hydraulic hollow clamping cylinder Electrical interface for connecting rod feeds 840D-SL Software Package "Turning with Shoturn" Tool monitoring 840D-SL 3D Simulation of the Precast Part Tailstock Chip conveyor High Pressure Pump Double filter Mahle Parts catcher V2 TC800 Clamping force control via differential pressure for main spindle

max load capacity 10,000 kg Dimensions LxWxH: 2700 x 2000 x 2300 mm

Fabricante :GURUTZPE Modelo :A-1000 4G X 5.000 Año :2003 CNC :SIEMENS SINUMERIK 840 D Capacidades y avances: Altura de centros :450 mm. Distancia entre puntos :5.000 mm. Recorrido carro transversal :530 mm. Recorrido carro longitudinal :5.000 mm. 3º guía de apoyo para el carro :INCLUIDO Volteo máximo sobre bancada :900 mm. Volteo máximo sobre carro transversal :650 mm. Anchura bancada :970 mm Avance rápido ejes X / Z :10 m/min Cabezal: Revoluciones del cabezal :0-1.600 rpm Nº de gamas automáticas de cabezal :2 Potencia motor principal :28/34 kW Paso de barra de cabezal :105 mm. Torreta: Tipo torreta :SAUTER 0.5.320.025 Posiciones torreta :4 Tamaño herramientas :280x280 mm. Contrapunto: Diámetro de la caña del contrapunto :140 mm. Eje W - contrapunto motorizado controlado por CNC :INCLUIDO Equipamiento adicional: Puerta delantera :INCLUIDO Pr ...

Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Key data: 300 mm, 1000 mm

Changes / errors in the technical data as well as prior sale reserved.

Key data: 300 mm, 1000 mm

Year of construction 2010 Turning length 1000 mm Turning diameter bed Ø 510 mm Turning diameter carriage 300 mm Spindle bore 80 mm Power spindle 16 kW Bed width 330 mm Quill 75 Ø Jaw stroke 160 mm Spindle mount 5 Mk Speed 2500 rpm Feed X - axis 8000 mm/min. Feed Z-axis 8000 mm/min. Length 3200 mm Height 1800 mm Width 1800 mm Loading free. from warehouse 95643 Tirschenreuth Shipping possible, transport costs are borne by the buyer Offer amount is incl. 19% VAT. This will be shown separately in the invoice. This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. No returns for used goods! No warranty. A viewing of the goods is possible by arrangement.

CNC machining center for turning, drilling, milling and grinding. Manufacturer: Klaaßen Type: SDM15-5 Year of Make: 2019 Control: Siemens Sinumerik 840Di sl/840D sl Turning diameter 1500 mm Center width 4500 mm Max. workpiece weight between tips 6 tons Load capacity Klaaßen C-bezel 3 tons 4-lane bed machine Full-fledged milling in 3 axes (Y-axis = 340 mm) Direct measuring system in every CNC axis Infinitely adjustable motor milling spindle Klaaßen motor milling spindle 37 kW / 4000 rpm / 330 Nm(S1) Robot: automatic tool change for turning and milling tools Bezels and tailstock fully movable Internal milling heads Grinding Support Spindle box with backlash-free C-axis ∅1000 mm chuck with through-hole ∅190 Hydraulic Bezel, C-Bezel Load Capacity 3-6 Tons, Tailstock with ∅160 Quill Cross slide unit Spindle box bearing diameter ∅395 mm Oil circulation coo ...

Inv. Num. : 8891 Type: HT 20 RIII Producer: Hitachi Seiki Generated: 2000 Parameters: Maximum turning length: 304.8 mm Max. turning diameter: 203.2 mm Maximum turning diameter over bed: 450 mm Maximum spindle speed: 5000 1/min Travel X: 400 mm Travel distances Z: 600 mm Number of tool positions: 12 Length: 2730 mm Width: 1930 mm Height: 1400 mm Weight: 4600 kg Equipment: Grasshopper Technical documentation Tool Holder Mayfran Chip Conveyor Hainbuch clamping

Inv. Num. : 8258 Type: XE35N Producer: Hanwha Created: 2018 Parameters: Switch-on hours: 8482 h Operating hours: 6915 h Maximum turning length: 60 mm Maximum spindle speed: 6500 1/min Spindle bore: 35 mm Length: 2060 mm Width: 1440 mm Height: 1760 mm Weight: 2750 kg Equipment: Collets Chip conveyor Bar Feeder 2 driven holders on the sub-spindle C-axes on both spindles Medium pressure pump (15 bar) Guide tubes

CNC Turning/Milling Centers CTX 410 Management Heidenhain Plus IT - 3 cheek chuck - Driven tool stations - Tailstock - Chip conveyors - Coolant tank

CNC Turning and Milling Center Okuma Multus B300 II Control: OSP-P 300SA Year of manufacture: 2023 Travels: Turning length: 900 mm Turning diameter max. 630 mm X-axis 580 mm Y-axis 160 mm (+80/-80 mm) Z-axis 935 mm B-axis 225° (-30° / +195°; 0.001° steps) C-axis 360° Mount: HSK-A 63 Total tool stations: 40 locations Spindle speed: 50 – 5,000 rpm Accessories: - Chip conveyors - Tailstock design NC-controlled, MT5 - Touchsetter - High-pressure pump IKZ 40 bar - Renishaw touch probe prepared - 3-jaw chuck Kitagawa B212 Ø304 mm

Key data: 180 mm, 400 mm

Control Siemens ... Sinumerik 840 D Turning diameter... 180mm Turning length... 400mm Inclined bed Spindle bore ... 63mm Turret head Tool turret ... 12 L x W x H ... 3875 x 2122 x 2345mm Machine weight ... 7000kg Spindle speed... 10-3500 rpm The machine is in good condition, possible to test under power at our warehouse in Brno.

CNC Turning/Milling Centers CTX 410 /2 Management Heidenhain Plus IT - 3 cheek chuck - Driven tool stations - Tailstock - Chip conveyors - Coolant tank

hello for sale 2 units turbine in trailer Technical Specifications Model: Rolls-Royce Allison 570KA Year of manufacture: 2005 Fully overhauled: 2012 Commissioned: 2016 Operating hours since 2016: Only 81 hours Fuel type: Gas Power output: 4,400 kW Mounted on trailer: Yes Additional trailer: UPS trailer included Location: Paris, France loaded now Availability: Immediate Documentation: Complete (technical & maintenance records)

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of Make: 2007 Turning length: 1,000 mm Turning diameter: 340 mm Swivel diameter over bed: 530 mm Swivel diameter over slide: 410 mm Spindle bore 72 mm Speed: 45 – 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (driven) B-turret: 8 tool positions Equipment: Tailstock Transformer Touchsetter Chip conveyor OneTouch IGF

Inv. Num. : 8904 Type: SB-CNC Producer: SPINNER Created: 1999 Parameters: Maximum turning length: 250 mm Maximum turning diameter: 285 mm Spindle diameter: 42 mm Maximum spindle speed: 8000 1/min Weight: 1500 kg

Control Siemens Sinumerik 840D Max. turning diameter 280 mm Max. rod passage main spindle 61 mm Turning length 490 mm Speed main/sub-spindle 4700 / 6000 min-1 12-fold revolver with applied revolver Wkz. C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders

with air blower / jogging device min. opening width: 620 mm max. opening width: 1.345 mm max. stacking weight: 1.000 kg with protective grid

CNC lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of Make: 2008 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret V12 (all places driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

CNC lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of Make: 2013 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: VDI 40 Equipment: - Chip conveyors - Touchsetter - OneTouch IGF - NC tailstock - 3-Jaw Power Chuck Forkardt 3QLC/K250

Fabricante MORI SEIKI Modelo NLX2500SY/700 Mes / Año 12/2011 CNC MORI SEIKI M730 BM Capacidades Volteo sobre bancada/carro 590/360 mm. Diámetro máximo torneable 460 mm. Longitud máxima torneable 795 mm. Paso de barra 80 mm. Eje Y INCLUIDO Recorridos y avances Recorrido eje X/Z 260/795 mm. Rango eje Y ±50 mm. Recorrido sub-cabezal eje B 734 mm. Avance rápido ejes X, Z, B 30.0000 mm/min Avance rápido eje Y 10.0000 mm/min Avance trabajo ejes X, Y, Z, B 0-5.000 mm/min Cabezal Eje C en cabezal INCLUIDO Indexación eje C cabezal 0.001º Velocidad cabezal 4.000 rpm Número gamas velocidad cabezal 2 Tipo nariz cabezal JIS A2-8 Diámetro paso cabezal 91 mm. Potencia motor principal 18.5 kW Sub-cabezal Eje C en sub-cabezal INCLUIDO Indexación eje C sub-cabezal 0.001º Velocidad sub-cabezal 6.000 rpm Número gamas velocidad sub-cabezal 1 Tipo nariz sub-cabe ...

Vertical CNC Lathe Manufacturer: Okuma Type LVT300-M Year of manufacture 2005 Control OSP-E100L Turning diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm C (pitch): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool positions in the turret: 12 Length of the feed belt: approx. 3,500 mm Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 Weight: 6,500 kg EQUIPMENT Turret can accommodate powered tools Feed belt 17 pallets There are still various steel holders and AGW s to purchase, these are not included in the scope of delivery. For more information, I am always available at 01778957069. Machine is in a used very good condition, no maintenance backlog, geometrically TOP

CNC lathe Okuma LB 300- M Control: OSP-U100L Year of Make: 2000 Turning length: 1,000 mm Turning diameter: 430 mm Speed: 4,200 rpm Tool turret: 12 places (driven) Recording: VDI 40 Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck Tailstock Parts catcher Samsys 3000 Short Bar Loader (optional)

Technical data: Circumferential diameter: 680 mm Center width: 1000 mm Speed: 2800 1/min Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-speed revolver VDM 40 - C-axis

Copyng lathe with 4 spindles BACCI mod. T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994

This 4-axis EMCO Maxxturn 65 lathe was manufactured in 2005. It features a Siemens 840 D control system, a 12-position turret with all driven tools, and a tool holder VDI 30. The main spindle operates up to 5000 rpm, while the counter spindle reaches 7000 rpm. It includes a Hainbuch collet chuck, parts catcher, and a chip conveyor. A great opportunity to buy this EMCO Maxxturn 65 lathe. Reach out for more information.

This Pinacho SE325 was manufactured in 2018. A reliable horizontal turning machine, it offers consistent performance for various machining tasks. Ideal for workshops seeking a dependable solution for turning operations. Contact us for more information.

This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information.

This Mazak SQT 250M was manufactured in 1998. It is a horizontal turning machine, ideal for precision machining tasks. Contact us for more information about this machine.

This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for sale.Contact us for more information.

This DMG Gildemeister CTX 320 linear was manufactured in 2006. A reliable horizontal turning machine, it offers robust performance for precision machining. Consider the opportunity to buy this DMG Gildemeister CTX 320 horizontal turning machine. Contact us for more information.

This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Ideal for precision turning with its 8 tool stations and manual tailstock. Consider the opportunity to buy this Feeler FTC 20 horizontal turning machine. Contact us for more information about this machine.

This 5-axis Mazak INTEGREX I-150 turn-mill centre was manufactured in 2012. Consider the opportunity to buy this Mazak INTEGREX I-150 turn-mill centre. Contact us for more information.

This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information.

This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information.

This 5-axis DMG MORI Gildemeister CTX 1250 TC was manufactured in 2012, featuring a turning length of 1250 mm and a main spindle speed up to 5000 min⁻¹. It includes a Y-axis travel of 100 mm, B-axis ±110°, and a tool magazine with 24 positions. Ideal for complex machining tasks, it also comes equipped with a Siemens SINUMERIK 840D control system. If you are looking to get high-quality turn-mill capabilities, consider the DMG MORI Gildemeister CTX 1250 TC machine we have for sale. Contact us for more information.

This lathe machine was manufactured in 2015. Equipped with a D160 Hydraulic chuck and a D45mm main spindle bore, it boasts reliability and precision. Featuring a 12-piece turret head, VDI-40, and hydraulic programmable tailstock, it ensures versatile machining operations. With 42597 hours of power on and immediate availability, this HAAS ST-10 presents an opportunity for efficient production. For further details, contact us.

This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine.

This 3-axis HULLER HILLE DVH 150 Duo vertical turning machine was manufactured in 1999. It features a maximum turning diameter of 160 mm and a swing diameter of 200 mm. Equipped with a Siemens 840D CNC control, it offers high precision and efficiency with speeds up to 7500 rpm and rapid traverse rates up to 60,000 mm/min. Ideal for complex turning tasks, the HULLER HILLE DVH 150 Duo machine we have for sale. Contact us for further details.

This SPINNER PD-CNC was manufactured in 2006. A reliable horizontal turning machine, it offers solid performance for your machining needs. Consider the opportunity to buy this SPINNER PD-CNC horizontal turning machine. Contact us for more information.

This 6-axis Gildemeister DMG GILDEMEISTER SPRINT Linear 65 was manufactured in 2006. A robust CNC Lathe with Linear Technology, it features a maximum turning diameter of 65 mm and length of 600 mm. Equipped with Siemens Sinumerik 840D control, three turrets, and Y-axis capabilities, it ensures precision and flexibility. If you are looking to get high-quality turning capabilities consider the Gildemeister DMG GILDEMEISTER SPRINT Linear 65 machine we have for sale. Contact us for more information about this machine.

This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information.

This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, its ideal for precision and efficiency in small part production. Contact us for more information about this machine.

This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine.