134,076 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck
Number of spindles 8 Max. bar feed in one station: 130 mm Max. bar feed in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment: +- 12 mm Max. stroke axial slide: 72 mm Max. stroke tool spindles: 106 mm Adjustment of tool spindles: +- 10 mm Main spindle speed: 500 - 4,000 1/min Piece time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg
The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Fanuc Max. turning diameter: ø65mm Max. workpiece length: 300mm Turret head: 2x12 driven positions Bar feeder: IEMCA master 880 MP Cooling + chip conveyor
Torni CNC, Doosan Puma TW2600, 2016 (low hours), complete with robot, it can be inspected in our warehouse in Gussago BS
ABB Turbocharger RR151-14 Spare part of a Jenbacher JW612 from 2006, 1 available Manufacturer: ABB Model No.: RR151-14 Type: Turbocharger (one JW612) Serial Number: 834401 n (Mmax) [1/s]: 1052 n (Bmax) [1/s]: 999 t (Mmax) [°C]: 710 t (Bmax) [°C]: 680 Year of Make: 2006 Weight / transport weight [kg]: 115 / 150 Transport dimensions [m]: 1.20 x 0.80 x 0.80
X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: ...
Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 22 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Knoll Chip Conveyor Knoll coolant system with paper belt filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air blowing device on the upper turret Milling spindle synchronized threading ...
Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 22 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Knoll Chip Conveyor Knoll coolant system with paper belt filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air blowing device on the upper turret Milling spindle synchronized threading ...
Year of construction 2017 Commissioning 06-2017 Control Mazatrol Smooth X 5-axis simultaneous machining Max. Rotary Diameter 658 mm Max. turning length 1,519 mm Travel X-axis: 615 mm Y-axis: 250 mm Z-axis: 1,585 mm W-axis: 1,574 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 4,000 rpm C-axis Max. bar passage: 80 mm Sub-spindle Drive power: 26 kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 24 kW (oil-air lubrication) Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 72 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 12 kg Special equipment Mayfran Consep 2000 II Chip Conveyor, Double Switching Filter Preparation IKZ 70 bar 70 bar high-pressure pump, 7 pressure levels Air bl ...
Klaaßen SDM15-5 turning machining centre, The top lathe we offer has the following in the basic configuration Technical parameters: ▪ SDM 4-5 CNC 4-Panel Bed Precision Lathe - Z-travel (slide longitudinal)= 5,000 mm (6,000 with TAE3) X-travel (face slide transverse)= 1,000 mm Y-axis (vertical movement)= 350 mm Maximum workpiece Ø = 1,500 mm Circulation diameter over face slide = 1,500 mm - Center width = 4,500 mm (5,500 with TAE3) ▪ CNC machine designed as a 4-lane tip lathe with full drive-over of the Bezels and superstructures - - - Cross slides and face slides restrict the diameter range by lateral arrangement on the lathe bed. As a result, there is no accompanying Diameter restriction above the face slide/tool carrier. Cross slide unit can be fully attached to the steady rests, HSSL and tailstock. This significantly reduces the set-u ...
We are offering for sale a Haas SL-30BHE with a Iemca Barfeeder Haas SL-30BHE - Voltage: 360–480 - Phase: 3 - Frequency (Hz): 50/60 - Full Load Current: 40 Amps - Largest Load: 70 Amps - 3400 rpm Ø102mm bore - Hainbuch SK80 - USB - Conveyor - Toolsetter - Rigid tapping - 12 x VDI40 turret - Partcatcher Iemca Bar Feeder - Model: KID 80 - Year of Manufacture: 2008 - Weight Capacity: 500 Kg - Rated Voltage: 400 V - Phase: 3 ~ - Frequency: 50 Hz - Rated Current (Ie): 3.5 A - Short-circuit Capacity (Icn): 5 kA Find more here - / Contact us at -
Manufacturer: Haas Model: ST-30 Year of Manufacture: 2011 Voltage: 360–480 V Phase: 3 Frequency (Hertz): 50/60 Hz Full Load Current: 40 Amps Largest Load Current: 70 Amps Short Circuit Interrupting Capacity: 10,000 Amps Certification: CE 3400 rpm Ø75mm bore 10" chuck Livetool og C axis Toolsetter Conveyor 12 x VDI40 turret Tailstock Find more here - / Contact us at -
Height=1 m, Overall length= 1.2 m, Overall width= 1.3 m, Net weight= 83 kg,
Key data: 6300 mm, 11200 mm, 4800 mm
Completely retrofitted Single Column Vertical Turning Lathe Blansko model SKSJ 1A equipped with one vertical head for turning and milling operations Technical characteristics: Face plate diameter 6300 mm Max. swing with moved out arm 11200 mm Maximum height of the workpiece 4800mm Max. turning diameter with column near the faceplate 8000mm Max. diameter of work piece clamped on floor grid (for internal processing) 14700mm Infinitely variable rotation of the faceplate 0.5 – 20rpm Max. work piece weight 100ton Milling spindle max. speed : 1000rpm 2 speed gear box with 15KW Siemens motor Manual clamping ISO 60 taper tool The machine was completely retrofitted during 2024-2025 and supplied wi ...
Technical details shown on picture. Parts shown by hand not come.
Mazak Integrex 200 Y, 20 tool positions, x,y,z = 530,140,1065. 30 kW spindle motor, 35-4500 rpm, chuck size 210 mm, through-hole diameter 61 mm, under power
table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,6 - 6,0 U/min bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating ins ...
total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software ...
weight max. in kg: 1250 kg turning speeds: 2,0 U/min height: max. 1.120 mm Torque: Tisch 490 Nm weight: 685 kg The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 3000 kg turning speeds: 1,7 U/min height: max. 1.620 mm Torque: Tisch 11.750 Nm weight: 1.305 kg The Siegmund Roto-Positioner is ideal for welding, Assembly and maintenance work. The positioning takes place via a hydraulic one Turn and tilt function. The Siegmund Roto-Positioner is also included equipped with a continuously height-adjustable axis. Furnishing: - Hydraulic rotation of the clamping plate - Tilt range up to 95 ° - Hydraulic height adjustment and tilt function - including hand control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: max. 1000 kg turning speeds: 0,18 - 0,58 U/min height: 976 - 1436 mm inclination: 0 - 115 ° table diameter: 895 mm voltage: 380 V total power requirement: 2,0 kW weight: 685 kg range L-W-H: 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjust ...
table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...
Specifications: Workspace: Max. circumferential diameter: 680 mm Circumferential diameter via X-guide: 565 mm Chuck diameter: 250 / 315 mm Plane stroke (X): 315 mm Longitudinal stroke (Y): 1350 mm Spindle box: Spindle diameter in the front bearing: 150 mm Spindle bore: 107 mm Main Drive: Power of the three-phase main drive: 36 / 45 kW Torque (100% ED / 40% ED): 600 / 750 Nm Speed range (100% ED): 20 - 3200 rpm Speed range (40% ED): 20 - 4000 rpm Tool carrier: Number of tool stations: 12 Cylindrical shank diameter: 50 mm Switching time 30°: 0.16 sec. Tailstock: Tailstock, travel: 1200 mm Quill stroke: 120 mm Quill diameter: 120 mm Quill holder: MK 5 Coolant Facility: Content: approx. 220 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: approx. 65 kVA Dimensions (LxWxH), approx.: 5560 x 2115 x 2050 mm Weight without chip conveyor, ...
Inv. Num. : 8637 Type: MF SPRINT 65 Producer: Gildemeister Created: 1999 Parameters: Control system: Siemens Maximum turning diameter: 200 mm
Inv. Num. : 8638 Type: SPU 20 Producer: MAS Created: 1995 Parameters: Control system: Siemens Maximum turning length: 700 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 380 mm
- Control: SIEMENS SINUMERIK 840-C - Max. rod Ø: 65 mm - C-axis - Turntable main spindle: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Revolver 2: 8 stations, 4 of which are powered - Speed applied Operating time: 4,000 1/min - Both turrets with internal cooling - High-pressure system -Conveyor - Bar feeder IRCO SiMag 65 - Max. rod length: 3200 mm Dimensions LxWxH: - Machine 3400 x 1700 x 1800 mm - Bar feeder 4000 x 1000 x 1400 mm - Chip conveyor 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg
DÖRRIES CTE 300 -5100 V6 - CNC CAROUSEL LATHE Year of construction : 1980 Electrical and electronic overhaul : 2002 Chuck diameter : 3,000 mm Max. swivel range : 6,000 mm Max. turning height : 2,700 mm Max. table load : 50 T Travel: X-axis : 2,550 mm Z-axis : 1,250 mm Y-axis : 5,054 mm (table) With C-axis Column travel : 1,250 mm Control Siemens : Siemens 840C Angle milling head
MOWEG (NILES) DKZ 4000 -UNIVERSAL CAROUSEL LATHE Year of construction : 1977 Chuck diameter : 3,500 mm Max. swivel range : 4,000 mm Max. turning height : 2,000 mm Max. table load : 20 T Column travel : 1,250 mm With digital display
YOU-JI YV600E - CNC CAROUSEL LATHE Year of construction : 2016 Chuck diameter : 600 mm Max. swivel range : 800 mm Max. turning height : 600 mm X: -50mm / +485mm Z: 800 mm Max. table load : 1 T Column travel : 1,250 mm Total power : 32 kW Machine weight : 15.5 T (approx.) Control: FANUC Oi-TD
Turbine power 330 kW at 1.35 bar and 170°C including exhaust gas heat exchanger
TAKISAWA TW-46 - CNC LATHE Year of construction : 2008 Specifications: - Center spacing/turning length: 900 mm - Turning diameter : 450 mm -X:250 mm -Z:900 mm - Spindle passage diameter: 60 mm - Engine power: 20 kW - Total weight: 6500 kg
Turbine power 294 kW at 1.35 bar and 170°C including exhaust gas heat exchanger
MAchine is in good working condition.
Max. rod Ø 20 mm Max. machining length 165 mm Spindle speed 8,000 1/min Max. rod Ø sub-spindle 20 mm Max. speed sub-spindle 8,000 1/min Number of tools that can be used: 21 Turning Tools Multiple Chisel Holders: 6 Driven tools for transverse machining: 3 Front side drilling tool: 4 Rear drilling tool: 8 Speed driven tools: 8,000 1/min
Mazatrol Matrix Control Max. turning diameter 530 mm Max. machining length 500 mm Max. bar passage 52 mm Travel X/Y/Z 450/200/550 mm Main spindle max. speed 5,000 rpm C-axis Milling spindle max. speed 12,000 rpm B-axis -30°-190°, 1° indexing Capto C6 Tool Holder Tool magazine with 72 tool positions Max. tool diameter 90 mm Max. tool diameter with free secondary positions 125 mm Max. tool length 210 mm Tailstock MK5 Automatic Parts Catcher (D:65 x L:120 x 2.5KG) Automatic Tooleye Conveyor Cooling by the spindle, 70 bar Coolant system with 70 bar high-pressure pump and paper belt filter Milling spindle synchronized threading Rapid traverse stylus angle of inclination during movement Cylinder (G07) + Polar Interpolation (G12.1) Signal lamp 1 pcs Irco Bar Feeder ILS-MUK-7012 -Max. rod length: 1,200 mm 1 pc oil mist extraction
Weibert DB 1050 Pro Vario Lathe Turning diameter 794 mm Tip height 397 mm Center width 1016 mm Speeds: 20- 3850 min-1 Konuse MK 2 Spindle Head Thread M33 2.2 KW 50 HZ 230 V Right - Counterclockwise Length 1700mm Height 1300 Weight 250kg Scope of delivery: Tool support 300 mm Increase in tool support Face Plate 80 mm Four-pronged drivers Grain Punches long ejection rod Short ejection rod 2 x tension wrenches 46mm / 38mm Tension wrench 8mm / 10mm Tension wrench 17mm / 19mm Allen key (2.5mm, 3mm, 4mm, 5mm. 8mm, 10mm)
Key data: 300 mm
Lathe CNC turning center with 2 spindles Emco Hyperturn 45 Year of manufacture 2018 Switch-on hours: 25,386 h Ready for operation (automatic mode): 17,035 h Production operation: 8,619 h Original price: 270.000,- € net Current leasing rate: 2,629 € Chip conveyor Bürener SPE 63/12-225 Year of construction 2018 Bar loading magazine TOP Automazioni ETL8-50 12-speed tool turret Powered tools on both turrets Y-axis Automation with EMCO bar feeders, swivel loaders or gantry loaders EMCONNECT - Digital Process Assistant (Sinumerik ONE) WORKSPACE Travel in X/Y/Z 160 (150)/70/510 mm Max. bar passage 45 (51) mm Max. turning diameter 300 mm Circumferential diameter over bed 430 mm Rapid traverse speed X/Y/Z 30/15/45 m/min MAIN SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. torque 100 Nm SUB-SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. t ...
Siemens steam turbine 3,370 kW nominal output. Speed: 11,500 r/min, live steam 80 bar, live steam 500 °C.
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Gurutzpe B1800/3 CNC Lathe Fanuc Oi-TD CNC Control, 52” Swing Over Bed, 372” Between Centers, 36” Cushman 4-Jaw Independent Chuck, 41” Swing Over Carraige, Spindle Speeds 1-300 RPM, 4.33” Spindle Bore, Sauter 4-Position Turret, 48,400 Lbs. Weight Capacity (Unsupported), 70,500 Lbs. Weight Capacity (2 Steadies), Hydraulic Tailstock, (3) Roller-Type Steady Rests, Full Length Scale on Z-Axis, Hennig Chip Conveyor [CNC Retrofit 2010]
Manufacturer: Siemens Model: SST-060 Year of Manufacture: 2016 Output Power: 1006 kW (nominal) Speed: 1500 rpm (nominal) Trip Speed: 1605 rpm Live Steam (Inlet Pressure): - Min: 20.6 bar - Nominal: 23.0 bar - Max: 25.4 bar Live Steam (Inlet Temperature): - Min: 300 °C - Nominal: 350 °C - Max: 378 °C Exhaust Steam (Outlet Pressure): - Min: 2.10 bar - Nominal: 3.10 bar - Max: 4.10 bar Exhaust Steam (Outlet Temperature): - Max: 331 °C Find more here - / Contact us at -
CNC Lathe Manufacturer: Gildemeister Type: CTX 420 linear V3 Year of Make: 2003 Control: Heidenhain Plus IT Circumferential diameter over bed: 680 mm Circumferential diameter over face slide: 565 mm Plan travel: 260 mm Longitudinal travel: 635 mm Drive power: 40/ 100% 25/37 kW Speed range from – to: 20 – 5000 rpm Weight approx.: 6500 Kg Equipment: Driven tools: 12 stations Tool carrier: 12-cavity Sauter revolver VDI 30 Partial hollow clamps Tailstock Quill stroke automatic Quill holder: Mk 5 Conveyor Measuring arm Oil mist extraction Errors excepted
Horizontal CNC lathe with double spindle and two working spaces. Muratec MW 40 Year of Make: 2017 Original price: 260.000,- € net Current leasing rate: 2,678 € LNS FOX Spray Cabine, built in 2017 SPECIFICATIONS Machine Type: Lathe Front Spindle Construction: horizontal lathe Chuck size: 135 mm (5 inches) Number of spindles: 2 pieces Turret: 2 à 10 stations Spindle speed: 10,000 rpm Drive power: 3.7 / 2.2 kW
Inv. Num. : 8680 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Table diameter: 260 mm Feed length X-axis: 680 mm Feed length Z-axis: 200 mm Maximum turning length: 100 mm Max. turning diameter: 250 mm Maximum workpiece weight: 40 kg Motor power: 35 kW Length: 3800 mm Width: 2100 mm Height: 2400 mm Weight: 7500 kg Equipment: Chip conveyor
Inv. Num. : 8679 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Feed length X-axis: 570 mm Feed length Z-axis: 200 mm Max. turning diameter: 220 mm Maximum workpiece weight: 120 kg Maximum spindle speed: 4500 1/min Max. workpiece height: 110 mm Weight: 6500 kg Equipment: Turret with Leiftool drive Chip conveyor
max. format 64 x 74 cm Year of manufacture 2005 Pile turner Tub system Load capacity 500 kg max. stacking height 120 cm Delivery date: immediately Price on request. We supply and install worldwide.
The machine is in good technical condition, testing possible after prior agreement. including a new chip remover
Key data: 680 mm, 1300 mm, 4000 1/min
Year of construction 2003 Spindle Hours 11600 Siemens Control 810D max. circulation 680 mm Circulation via X-guide 565 mm Longitudinal travel 1300 mm Planweg mm 315 Spindle head h5 Spindle diameter in front bearing 150 mm Spindle bore 107 mm Chuck diameter 315 mm max. torque 600 Nm Spindle speed 4000 rpm Rapid traverse X-axis 60 m/min Rapid traverse Z-axis 45 m/min Tool carrier for 12 tools Powered Tools 12 Tool holder VDI 40 Quill stroke 120 mm Recording MK 5 Dimensions of the machine with chip conveyor L/W/H 570/2600/2210 mm Machine weight approx. 10000 kg Accessories: Bezel clamping range 30-245 mm Conveyor Lathe chuck
Manufacturer: KKK Model: AFA4 / AFA6 TWIN Year of Manufacture: 1997 Output Power: 1822 kW (maximum) Inlet Steam Pressure: 22.9 bar (minimum), 25.5 bar (normal), 28.1 bar (maximum) Outlet Steam Pressure: -0.5 bar (normal), 0.2 bar (maximum) Inlet Steam Temperature: 355 °C (minimum), 405 °C (normal), 415 °C (maximum) Outlet Steam Temperature: 275 °C (maximum) Generator Specifications: Brand: AEM Generator Type: SE 500 M4 Power: 2203 KVA (400 V, 3180 A, 50 Hz) Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
