We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,929 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
L-beam: 50x5 mm square material: 50x40x3 mm I - beam section - flat steel: 120x15 mm I-beam section - upend: 60x10 mm round material: Ø 35 mm tube diameter: Ø 70x2 mm roll diameter: 155 mm bending speed: 4,3 m/min bore: 50 mm total power requirement: 1,5 kW weight: 400 kg dimensions: 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
I-beam section - flat steel: 80x20 (d1200) mm I-beam section - upend: 80x25 (d2100) mm L-beam: 50x50x6 (d1000) mm bar material - diameter: 40 (d800) mm square material: 60x60x3 (d4000) mm rectangle: 80x30x3 (d6000) mm tube diameter max.: 70x2 (d1600) mm tool adaptor: 60 mm roll diameter: 177 mm bending speed: 6,4 m/min total power requirement: 4 kW machine weight ab.: 970 kg Overall size: 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
tube diameter: 45 mm wall strength: 2 mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 5x0,85x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
tube diameter: max. 3 Zoll wall strength: 3 mm pressure: 16 t weight of the machine ca.: 45 Kg dimensions: 0,8 x 0,6 x m : 0,65 x 0,60 x 0,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 32 mm, 2 mm
Inv. Num. : 6997 Type: CMH 32 NC Producer: Cansa Generated: Parameters: Maximum tube diameter: 32 mm Maximum pipe wall thickness: 2 mm Maximum bending angle: 1900 st Power consumption: 4.4 kW Mandrel length: 2000 mm Max pressure: 120 bar Equipment: Hydraulic clamping Hydraulically controlled mandrel Hydraulic collet Colour touch screen Display of the current position of the pipe on the monitor (displacement and rotation) Display of the daily production on the screen of the control system Display error messages on the control system screen Saving created programs in the memory of the control system Ability to store up to 100 bending programs
used
tube diameter: 25 mm wall strength: 2 mm bending radius min.: 10 mm Control: bending radius max.: 75 mm total power requirement: 11 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Pressure power: 50 bar : 200 mm : 1,2,3/4,1,5/4,1 1/2, mm weight of the machine ca.: 140 kg Hydraulic tube bender. Machine suitable for bending tubes with diameters 3/8 , 1/2 , 3/4 , 1 , 5/4 , 6/4 , 2 , 2-1/2 , 3 . Easy and smooth operation. 6 segments included stand included made in Europe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Soco SB-51X4A-3SV Tube Bending Machine 51 mm diameter 3500 mm length up to 4 mm thickness
used
Akyapak 38 3D Tube and Profile Bending Machine 16,25 and 30 mm tools are included
new
roll diameter: 76-86 mm Shaft diameter: 20 mm Shaft revolutions: 11 U/min Bending capacity round tube: 30 mm : 25x6 mm Angle iron: 20x20x4 mm Drive: 0,18 kW range L-W-H: 530x420x500 mm weight: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Macri Provar 6-45U-D CNC Tube Bending Machine with many tools 6 axis There are many tools(37 pieces)
used
Cesurbend PBNC 38 III Tube Bending Machine NC Control Machine is in excellent condition
used
Tube heat exchanger,stainless steel,with Ø 20 mm tubes,cabinet Ø 350 x L 2700 mm.
used
BLM 63 Tube Bending Machine Machine is in good condition
new
Indexing tube without man 40/54 tap MAN Part Number: 419.01.004
used
tube bending machine The machine is located in Spain. Year manufactured is 2005
used
I-beam section - upend: 100 x 20 (d 2100) mm tube diameter max.: 100 x 3 (d 3000) mm L-beam: 80 x 80 x 8 (d 2000) mm square material: 50 x 25 x 2 (d 600) mm bar material - diameter: 60,0 (d 1000) mm I-beam section - flat steel: 120 x 30 (d 600) max. 140 mm tool taper: 80,0 turning speeds: 4,2 U/min weight: 1600 kg dimensions: 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according ...
used
Outside diameter maximum: 0 mm Wall Thickness: 0 mm Pipe length maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Manual bending device: Tube: Diameter: 42 mm Wandstärke: 2 mm Max. bending angle: 185 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 3060 mm Width: 1025 mm Height: 1078 mm
used
Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg
used
190° maximum 114.3x3.6mm/3.5 max. tube 30kw L1, L2, L3 + N +PE Dimensions: 10 x 1.7 x 1.8 m Weight: approx. 14 tons Oil: 400 liters of GALP HIDROLEP 46 type oil Various tools on request (1/2,3/4,1 and 2) Good condition
used
- Guide tube MWM 12135199 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies an ...
used
Used BLM PR 35 D Tube bending machine with drilling units Year 1995 visible in Italy
used
Tonazzi Colibri 80 fully automatic aluminium tube filling and sealing machine.
used
Hand-hydraulic tube bending machine with hinged bending frame for pipe Ø: 3/8 - 3"
used
Tube filling machine,stainless steel,manual,max 3300 ml.
used
There are 40 identical tube fans available.
used
There are three shell and tube condensers available with on condenser each (1) Bitzer K203HB, year of construction: 2004 (2) Bitzer K5377HB (3) Bitzer K573HB, weight: 66kg, year of construction: 2003.
used
Paper tube length/ diameter: 1000-1600/ 20-160mm, connected load: 1.5kW, length: 4600mm, width: 1500mm, height: 1400mm, weight: 680kg, with instruction manual.
used
AEG / AVITEQ vibrating tube ( only 3 pieces ) 2 x : Length 3000 mm - Diameter 500 mm with two vibration motors of 1.3 kW each 1 x : Length 5900 mm - Diameter 500 mm with two vibration motors of 2.3 kW each
used
Heat exchanger, shell and tube heat exchanger FUNKE Safety heat exchanger for system separation type SWF 301-6-B13-4 Series No. 659839 Drawing No. 748 924 0850 Year of construction 2011 Operating pressure max. Shell chamber 16 bar Pipe space 10 bar Safety room 16 bar Volume jacket chamber = 1.2 liters Pipe space = 0.7 liters Safety room = 0.3 liters Temperature max. 100C jacket pipe 80 mm- leakage indicator via ALCO pressure switch- 2 pieces pipe fittings on the jacket pipe M30 x 2mm thread for 22 mm pipe- outer diameter (hydraulic oil)- 2 pieces pipe fittings on the lid 3/4 (cooling water) Dimension L x W x H: 580 x 220 x 130 mm Net weight: 16 kg good condition; used
used
New glass bottle depalletizer type: tube gripper including bottle table, discharge conveyor, rack, vacuum pump and elevator Top condition
used
Tube packaging machine Manufacturer: TRANSNOVA-RUF / ABB Type: Robot-Packer Year of construction: 2012 Hours 3630 Very good condition Instantaneous setting 100 tubes/min Documentation available
used
Protective tube luminaire housing PAGUS Ø 70 mm x 700 mm Glass inner diameter: Ø 60 mm Glass outer diameter: Ø 70 mm Glass length: 700 mm New ! Dimensions: 770 x 75 x 75 mm
new
CNC-controlled "high-tech" precision profile and tube bending machine with a fixed upper roller and two movable lower rollers Repeatable precision bending of profiles, tubes and solid material - CNC control based on Windows® 10 with special algorithms - Three to five CNC axes. Equipped with - - Touch screen and 3D color graphics - Imported DXF files are generated into work programs - Automatic calculation of distances - bending time and bending strength - Machine body made of cast steel - Shafts - upper and lower rollers Ø 70 mm - Shafts made of special steel - hardened and ground Bending force 190 kN Highest surmountable moment of resistance with standard rollers W = 35 cm³ Smallest possible bending radius with standard rollers 150 mm Roll speeds infinitely programmable 1 to 15.6 rpm Drive power mechanical roller drive 4 kW Drive power hydraulic unit 4 kW W ...
used
Quartz Sleeve, 4 pieces AQUAFINE (Original) 3184 Length: 832 mm Inner diameter: Ø 22 mm Outer diameter:Ø 25 mm New ! Dimensions ( quartz casing tube ): 832 x 25 x 25 mm Dimensions ( packaging ): 970 x 88 x 55 mm
used
Quartz Sleeve, 5 pieces AQUAFINE (Original) Length: 832 mm Inner diameter: Ø 20 mm Outer diameter:Ø 22 mm New ! Dimensions ( quartz casing tube ): 832 x 22 x 22 mm Dimensions ( packaging ): 970 x 88 x 55 mm
used
Quartz Sleeves BERSON, VEOLIA F200 Length: 200 mm Inner diameter: Ø 30 mm Outer diameter:Ø 33 mm New ! Dimension ( quartz casing tube ): 200 x 33 x 33 mm Dimensions ( packaging ): 485 x 85 x 75 mm
used
Water bag pipe, circular shape, with weld-on end and clamping sleeve, 3 pieces PAGUS 44049 Welding end: 20 x 2.6 mm Clamping socket: G 1/2 ( inch ) Material: Stainless steel ( 1.4571 ) New ! Dimensions ( water bag tube ): 270 x 95 x 50 mm Dimensions ( packaging ): 390 x 300 x 100 mm
used
Water bag pipe, circular shape, with weld-on end and clamping socket, 7 pieces PAGUS 354080 Welding end: 20 x 2.6 mm Clamping sleeve: G 1/2 ( inch ) Material: Steel ( St35.8 ) New ! Dimensions ( water bag tube ): 270 x 95 x 50 mm Dimensions ( packaging ): 390 x 300 x 100 mm
used
Protection tube made of solid material, with flange ENDRESS + HAUSER TW15 - 00A1GA10 DIN 43772-4F diameter: Ø 24 mm total length: 260 mm tip diameter: Ø 12,5 mm Drilling diameter: Ø 6.5 mm, depth: 240 mm female thread: M18 x 1.5 Flange diameter: Ø 115 / 70 mm bolt circle diameter: Ø 85 mm hole diameter: Ø 14.0 mm Material: stainless steel ( 1.4571 ) New ! Dimensions ( packaging ): 260 x 120 x 120 mm
used
Control tube JACOB NW120 article number: 12123190 DN120 length: 200 mm control opening: Ø 115 mm wall thickness: 2 mm Material: stainless steel New ! Dimensions: 200 x 145 x 133 mm
used
Glider for round tube, 240 pieces PAGUS Ø 18 mm Pipe diameter ( outer ): Ø 18 mm Pipe diameter ( inner ): approx. Ø 14 mm Total length: 17 mm head thickness: 5 mm Material: Plastic New ! Dimensions ( packaging ): 240 x 160 x 50 mm
used
Glide for round tube, 330 pieces PAGUS Ø 22 mm diameter ( inside ): Ø 22 mm diameter ( outside ): Ø 25 mm length: 27 mm Material: plastic New ! Dimensions ( packaging ): 300 x 240 x 120 mm
used
Maximum Tube Diameter: 110 mm // Minimum Diameter: 50 mm
used
Glider for round tube, 190 pieces PAGUS Ø 22 mm diameter ( inside ): Ø 22 mm diameter ( outside ): Ø 25 mm Length: 29 mm Material: Plastic New ! Dimensions ( packaging ): 240 x 180 x 130 mm
used
Hand Pipe Bender ROTHENBERGER H+W Plus 8 / 5/16 Pipe diameter (exterior): 8 mm ( 5/16 ) maximum bending angle: 180 degree Bending radius (center tube:) 22 mm used, tested ! Dimensions: 300 x 50 x 50 mm
used
Brush deburring machine, tube deburring machine ERINI type 250 Year of manufacture approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2.2 / 2.8 kW Mains connection 380 volts, 50 Hz - Material support - new deburring brush - Extraction connection 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition; used
used
Offer 23246 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Tubular circular saw - Inside and outside pipe end burr device - Mandrel bending device approx. 2000 mm - hydr. Spine Retraction - various bending tools as shown
used
UV dryer, UV lamp, UV high-performance lamp -The lamps come from a UV paint drying process -Working width: 1400 mm -Double housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 -Emitter power: 80 W / cm -Quantity: 3x dryer lamps with 2 tubes each available -Price per piece -Transformers and accessories: available for an extra charge -Dimensions: 1720/400 / H630 mm -Weight: 126 kg / piece
used
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector -Manufacturer: Nilfisk, Bent End Plastic Tube Ø 40 VA unused OVP -Type: 107402631 -Diameter: Ø 45 mm -Number: 4x pipe available -Price: per piece -Dimension: Ø 48 x 320 mm -Weight: 0.1 kg/piece