tube used for sale

General SKU345S1062 LocationBarneveld MakeGab Neumann TypeH-B-2,5 No.10927-8691 Year of construction1991 Pressure Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.75 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface1,75 m² Max. temperature-60/165 °C Max. temperature-60/80 °C Shell connectionsDN40 (2x), DN50 Cover connectionsDN40, DN50 Information Total height1 m Weight210 kg Floorspace0,5x0,5 mShell and tube heat exchangersGab NeumannHeat exchangers > Shell and tube heat exchangersBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect  ...

General SKU212T507 LocationBarneveld MakeLe Carbone-Lorraine TypeNC210 S No.20146 Year of construction2001 Pressure Vacuum possible jacketcheck Working pressure shell10 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface4.3 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Notified bodyTÜVÖ Heating surface4.3 m² Max. temperature-10/110 °C Shell capacity45,6 Ltr. Shell diameter273 mm Wall thickness shell6,3 mm Max. temperature-10/110 °C Shell connectionsDN40 (2x) Cover connectionsDN80 (2x) Information Total height1,87 m Weight310 kg Floorspace0,5x0,5 mShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for s ...

General SKUR0893 LocationBarneveld MakeLe Carbone-Lorraine AG (FRA) TypePolybloc NF610G No.17324 Year of construction1989 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface24.5 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface24.5 m2 Max. temperature165 Degr.C. Shell diameter660mm Shell length1900mm Max. temperature165 degr. C Shell connections2x DN150 Cover connections2x DN200 Capacity134.1 Ltr Information Total height2.4 M Weight1500 KG Floorspace1,0x0.9 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Re ...

General SKUR0894 LocationBarneveld MakeLe Carbone AG TypePolybloc NF 610 G No.17496 Year of construction1997 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface16,3 m2 Max. temperature165 degr.C. Shell capacity80 Ltr Shell diameter660mm Shell length1370mm Shell connections2x DN150 Cover connections2x DN200 Capacity93.8 Ltr Information Total height1,7 M Weight1250 Kg Floorspace0,9x0,9 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKUR0890 LocationBarneveld MakeLe Carbone AG (F) TypePolybloc NF610G No.130261 Year of construction1990 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface16.3 m2 Max. temperature165 degr. C Shell capacity80 ltr. Shell diameter660mm Shell length1380mm Max. temperature165 degr. C Shell connectionsDN150 (2x) Cover connectionsDN200 (2x) Capacity94,2 ltr. Information Total height1,8 M Weight1300 Kg Floorspace0,9x0,9 MShell and tube heat exchangersLe Carbone-LorraineHeat exchangers > Shell and tube heat exchangersBrand > Le Carbone-Lorraine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price comp ...

General SKU394U1138 LocationBarneveld MakeGab Neumann TypeN-B-6,9-C No.25865-20250 Year of construction2007 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface6.6 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface6,6 m² Max. temperature-30/+180°C Shell capacity37 ltr Shell diameter650 mm Shell length800 mm Shell with expansion jointcheck Shell connectionsDN50 (2x) Cover connectionsDn200, DN50 MaterialGraphite Information Total height1,35 m Weight620 kg CEcheck Floorspace0,7x0,7 m Technical specs Extra informationVolume 29 ltr, allowable pressure -1/+6 bar, allowable temp -30/+80°CShell and tu ...

General SKU394U1141 LocationBarneveld MakeGab Neumann TypeH-G-6.9 No.17053-14714 Year of construction1999 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Diabon Surface6.9 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface6.9 m² Max. temperature-10/+180°C Shell capacity32 Ltr. Shell diameter700 mm Shell length830 mm Max. temperature-10°C/+80°C Cover connectionscheck MaterialGraphite Information Mounted on framecheck Total height1,30 m Weight650 kg Floorspace0,7x0,7 mShell and tube heat exchangersGab NeumannHeat exchangers > Shell and tube heat exchangersBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working condition --  ...

Working hours laser on: 32824 h Working hours beam on: 28572 Laser power: 3000 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 21000 kg max. tube length: 6500 mm max. length finished parts: 4500 mm max. tube diameter: 152 / 170 mm min. tube diameter: 12 mm max. tube weight: 25 kg/m

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once

3″ x .125″ Oto Mills – Someron HF Tube Mill Make (Entry Section): Oto Mills, Make (Forming & Sizing): Somenor, Maximum Pipe Diameter: 76mm, Wall Thickness: 0.8mm – 3mm, Shaft Diameter: 60mm Direction: Right to Left. Abbel Jib Crane, Mandrel Uncoiler, Weight Capacity: 10,000Lb, Powered Mandrel Expansion. Automatic Shear & End Welder, Hydraulic Shear, Automated Torching Head, Vertical Otto Mills Accumulator with DC Motor Drive, Driven Entry & Exit Guiding Rolls, Driven Entry Pinch Rolls, Adjustable Edge Guides, 5-Roll Coil Flattener. Forming Mill with Six Forming Stands, Seven Side Stands, Individual Gear Boxes, Universal Drive, Complete Set of Second Rafted Forming Stands, Motor: 60HP DC Drive. Welding Section with Emmedi 200Kw High Frequency Welder, 3-Roll Mechanical Squeeze Box, ID Scarfing Head, Powered Bead Re-Winder, Extended Cooling Section. Sizing Mill with Four (4) Sizi ...

76mm x 6mm Oto Mill HF Tube Mill Make: Oto Mill, Year New: 2005, Tube Diameter: 15mm – 76mm, Wall Thickness: 1mm – 6mm, Shaft Diameter: 100mm, Speed: 140 mpm, Direction :R-L. Double End Uncoiler with Coil Car, Crop Shear & TIG End Welder, Vertical Accumulator with 80Kw DC Drive, Forming Mill with Seven Forming Stands, and Seven Fin Passes, 110Kw DC Drive, and 70Kw DC Drive, Welding Section with 350Kw HF Thermatool Welder, Adjustable Sqeeze Box, Inside and Outside Scarfing Head, Bead Re-Winder, Cooling Section, Sizing Mill with Four Sizing Stands, and Four Fin Passed, Four Double Sided Turk Heads, 110Kw DC Motor, Friction Type Flying Cut-Off Saw with 74Kw DC Drive, Run Out Conveyor, and Table. Updated Electrics, LCD Display Controls, Hydraulics

32mm x 2mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2002 Tube Diameter 10mm – 32mm Wall Thickness: 0.7mm – 2mm Speed: 180 mpm Direction: R-L Coil Weight: 3 ton Entry Coil Car Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 50Kw Motor & Drive Finn Passes with 35Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 50Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

50mm x 4mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2003 Tube Diameter, 12.7mm – 51mm Wall Thickness: 0.8mm – 4mm Speed: 160 mpm Direction: L-R Coil Weight: 5 ton Entry Coil Car Double Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 70Kw Motor & Drive Finn Passes with 45Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 70Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

63mm x 3mm Oto Mills HF Tube Mill Make: Oto Mills, Model: 552, Tube Diameter: 10mm – 63.5mm, Material Thickness: 0.8mm – 3.2mm, Line Direction: Left to Right. 10,000Lb Double End Uncoiler & Coil Car, Automatic Coil Joiner, Vertical Accumulator, Coil Straightener, Forming, Fins, Sizing Sections, 70mm Shaft Diameter, Three (3) 100HP Motors and Drives, Coolant Section, 30Kw Thermatool HF Welder, Three (3) Turk Heads, Spare Rafted Stands, Run Out and End Tables, Tooling

76mm x 6mm Oto Mills HF Tube Mill Year New: 2005, Tube Diameter, 12mm – 76mm, Wall Thickness: 1mm – 6mm, Speed: 140 mpm , Direction: L-R, Coil Weight: 10 ton. Entry Coil Car, Double Mandrel Uncoiler, Automatic End Joiner, Vertical Accumulator, Coil Straightener, Forming Mill with 110Kw Motor & Drive, Finn Passes with 70Kw Motor and Drive, 300Kw Thermatool HF Welder, Cooling Section, Sizing Mill with 110Kw Motor & Drive, Turk Head Stands, Flying Cut-Off Saw, Run Out Conveyor and End Table, Tooling for Round and Profiles, Electrics, Hydraulics, Controls

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

MAX. OUTER TUBE DIA. 85 MM

42mm W/E HF Tube Mill Make: Won Engineering (Korea) Year New: 2008 Diameter: 10mm – 42.7mm Square Sizes: 12mm x 12mm – 18mm x 18mm Pipe Length: 5m – 8m Line Speed: 120 meters per minute Dual Mandrel Uncoiler Cage Type Accumulator Forming Mill with 100Kw DC Drive 150Kw High Frequency Welder Cooling Section Sizing Mill with 100Kw DC Drive Flying Cut-Off Saw with 7.5Kw Motor Run Out Table Dumping Table Electrics, Hydraulics, Controls, Lots of Tooling

8″ x .220″ GSI HF Tube Mill Year: 2000, Diameter: 1.5″-8″, Wall Thickness: .050″-.220″, Shaft Diameter: 125mm, Speed: 20-40 meters per minute, Coil Width: 148mm-990mm, Coil Weight: 5,000Lb, Product: Round, Square, Rectangular. Double Mandrel Uncoiler, Shear & End Welder, Cage Type Accumulator, Forming Mill with 210Kw DC Motor, 300Kw High Frequency Welder, Sizing Mill with 125Kw DC Motor, Two (2) Turk Heads, Flying Cut-Off Saw, Run-Out Table & Conveyor. Lots of Tooling, Electrics, Hydraulics, Controls

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

The Straw Applicator TSA Tubex 9001 is one of the save application solutions. Heavy structure and a speed up to 7500 units/h are ideal for the use with a TBA 19 Filler. The speed can be set variously.

Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once

machine for expanding and reducing tubes 2 heads

machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

machine for expanding and reducing tubes 13 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

This unit is a filling and closing machine for metallic, aluminium tubes. The construction principles, materials used and innovative concepts guarantee maximum productivity, user friendliness and quality, making this machine an ideal solution for the pharmaceutical and the cosmetic market. Special consideration was given to a rapid change over to different tube sizes and consistency of filling product. The in-built flexibility makes it the ideal machine for use in research and development. Easy to use machine with excellent access for cleaning and maintenance. Technical data: Length mm 1825 Width mm 1115 Height mm 2150 Net weight Kg 2200 Production characteristics: Tube diam. min-max 10-52 mm Tube length min-max 52-250 mm Dosage min-max 2,5-500 ml Production capacity 40-120 tubes/min Automatic tube filling machine equipped with heated funnel, agitated hopper and 14 ...

Used in Oil and gas exploration and Petroleum Refinery. The liquid flows through the bundle of tubes in a chamber where the exchange of heat occurs. It is mostly suited for high pressure applications. Two fluids flow through the chamber with different temperatures one through the tubes and other flows inside the chamber. A heat exchanger is a device used to transfer heat between two or more fluids. There are different categories of tubular heat exchangers; one of the most common is the shell and tube exchanger. A shell and tube exchanger consists of a number of tubes mounted inside a cylindrical shell. Two fluids can exchange heat: one fluid flows over the outside of the tubes while the second fluid flows through the tubes. The fluids can be single or two phases and can flow in a parallel or a cross/counter flow arrangement. The shell and tube exchanger consists of four major  ...

• Hot-air welding for plastic and laminate tubes • 1 filling station, capacity 600-2,400 tubes/h, the maximum speed depends on the format and product • Tube lengths 50-245 mm depending on format parts • Tube diam. 10-50 mm depending on format parts • Tube input chute semi-automatic • Dosing 1-300 ml depending on pump cylinder • 1 pump cylinder for 25-300 ml • Tube alignment according to print mark • Filling nozzle diam. 37 mm with blow-off function • Tube welding/encoding and cooling station • Tube cutting station • Format parts for tube diam. 50, tube length 161 mm, of which cap height 23 mm • Product container made of s/s ( not shown on photos) • PLC Texas Instruments model 425 • Drive 380V/50Hz

Hot-air welding for plastic and laminate tubes • 1 filling station, capacity 600-2,400 tubes/h, the maximum speed depends on the format and product • Tube lengths 50-245 mm depending on format parts • Tube diam. 10-50 mm depending on format parts • Tube input chute semi-automatic • Dosing 1-300 ml depending on pump cylinder • 1 pump cylinder for 25-300 ml • Tube alignment according to print mark • Filling nozzle diam. 37 mm with blow-off function • Tube welding/encoding and cooling station • Tube cutting station • Format parts for tube diam. 50, tube length 161 mm, of which cap height 23 mm • Product container made of s/s ( not shown on photos) • PLC Texas Instruments model 425

Modular tube filler for pharmaceutical, cosmetic, chemical and food products. The modular concept allows it to grow along with customer needs, an initial configuration can be completed with automatic tube loading, device and tube print registration, manual or automatic tube feeding, heat sealing of plastic and laminated tubes. by means of hot jaws, compact operator panel, suitable for memorizing the working parameters. Tube diameter from 28 to 55 mm. Dosing capacity from 3 ml to 240 ml. Characteristics Model: COMBI Year 2002 Width: 1150mm Height: 2300mm Length: 2000mm Tube diameter from 28 to 55 mm Dosing capacity from 3 ml to 240 ml

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

Crippa tube bending machine 955LE CNC tube CNC tube bender Ø30 x 2 mm (max. Ø55 mm) - Tube wall thickness – 2.0 mm (max. 2.5 mm) - Tube material - steel - Bend radius 72, 90, 100, 150 mm (max. 250 mm) - 3-axis bending It was never working – new, but the production year ca. 2015

Fully automatic high speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The high number of cycles with up to 75 cycles per minute is achieved, among others, by using a timing belt drive instead of a timing chain. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 75 cycles/minute (corresponds to: max. 150 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1 ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 50 cycles/minute (corresponds to: max. 100 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1% | max. length of the tube: 200mm | tube diameter: 10-50mm (whereby one mould is required per tube diameter) | number of filling heads: 2 | storage hop ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1% | max. length of the tube: 200mm | tube diameter: 10-50mm (whereby one mould is required per tube diameter) | number of filling heads: 1 | storage hopper capacity: 40/50 L | product contact  ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. Fully automatic feeding, filling and sealing of the tubes. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Water cooling system, batch printer also included. PLC controlled with easy operation due touch screen. Optionally for surcharge: automatic tube outfeed device for convenient connection with other equipment such as cartoning machine. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | filling range: 10-250ml | accuracy: = +/-1% | tube dimensions: customized, whereby one mold is required per tube diameter | ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 121200 € : 5700 mm : 1100 mm : 1550 mm : 2700 kg : 25 cm³ : 76,1 x 6,8 mm : 2”1/2 mm : 76,2 x 3,8 mm : 63,5 x 63,5 x 5,6 mm : 70 x 50 x 8 mm : 70 x 50 x 6 mm : 79 mm : 250 mm : 20 mm : 195 ° : 5/7 U/min : 27 kW : 200 l FST clamping system (Patented) 6 programmable axes: carriage mobement (Y1 axis), bending plane rotation (B axis), bending angle (C axis), pressure die movement (X2 axis), booster (Y2 axis) and hydraulic mandrel movement (Y3) Touch screen control with 3D display of the tube Anti collision system tube/machine, tube/floo, tube/external elements and tube/equipment Importing files in iges and dxf format (optional) Integrated Wi-Fi FURTHER MANDREL LENGTHS ON REQUEST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Twin tube emitter, infrared twin tube emitter, with protective tube TUNGSTEN 0190-73367 7.4KW 60K/60KO Load-Lock 7400 W 230 V Twin Tube: Length: 1470 mm Width: 24 mm Height: 12 mm Protection tube: Ø 40 x 1435 mm New ! Bulky goods ! Dimensions (packaging): 1650 x 160 x 120 mm

• for aluminium tubes with twofold/fourfold seam • output max. 2.100 tubes/h, the maximum speed depends on the format and product • tube-Ø 10-40 according to change parts • tube length 50-250 mm • dosing 50-250 ml • product parts 1.4404 (AISI 316L) • 10 l filling funnel with stirrer • tube feeding magazine • tube orientation device • embossing device for max. 8 characters • change parts for tube diam. 20, 24 + 35 mm • discharge via chute • touch screen • PLC Hitachi EH-D40DTPS • batch printer • 400V/50Hz/14A • mobile • as good as new

3 Axis CNC Electric Wire/Tube Bender Year of manufacture: 2010 Wire / tube capacity: Ø 4 to 16 mm / thickness 2 mm Driven axes: • C axis: bending stroke 195° - Repeatability 0.05° - speed 67 rpm • Y axis: tube linear feed stroke 790 mm - repeatability 0.05 mm - Speed 120 m/min • Axis B: tube orientation unlimited stroke - Repeatability 0.05 mm - Speed 60 rpm Other movements: • Tightening: tube, jaws, ruler • Accompaniment ruler • Collet clamping • Head horizontal movement SIEMENS-CNC

Unused TGM model E250 Matic fully automatic stainless steel tube filling and sealing machine for Pharmaceutical, Cosmetic, Chemical and Food Industry products. Output Capacity: Upto 3,700 units/hour Metal Tubes: Diameter 10-42mm, Length 50-240mm Plastic Tubes: Diameter 10-50mm, Length 50-240mm Tube print orientation and sensor to detect tube right way up, minimises waste. Fold and roll crimping system for closing metal; polyethylene/laminate tubes sealed by hot air or hot jaws. Integrated ergonomic tube loading system, swings aside for easy access The machine is presently set up with hot air for plastic tubes and there is a brand new wrapped head supplied for aluminium tubes. Additional options included: Stirrer/scraper; Coding stamp; Product level control; Tube orientation system; Water cooler, Pharmaceutical product/data recovery system for recall of batch history  ...

Tube filling and closing machine for metal tubes incl. - Empty tube magazine - Automatic tube orientation - Closing stations for single or double folds - 1 pc. format parts for Tube D.40 - mechanical capacity up to max. 80 tubes / min. Machine has to be refurbished self-directed.

Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand

Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...

• For filling and sealing plastic tubes with heating jaws • Manual insertion and removal of tubes, further stations automatic operation • Stations: Filling, heating, sealing with embossing (1-line, max. 8 digits), cutting • Filling range 10-150 ml with piston dosing and rotary slide valve • Output approx. 100-800 tubes/h depending on product and filling quantity • Adjustable heating temperature • 10 tube holder cassettes for tube diam. max. 60 mm • Various tube holders for tube diam. 18, 22, 34, 36 and 40 mm • Electr. connection 220V/50Hz

It is an automatic hot air welding plastic pipe filling and sealing machine. (Metal tube option) The design principles, the materials used and the innovative concepts guarantee maximum productivity, ease of use and quality, making this machine the ideal solution for the pharmaceutical and cosmetics market. The group layout allows for easy adaptation to a wide variety of tube filling problems. Particular attention was paid to the quick changeover to different tube sizes and the consistency of the filling material. AREAS OF APPLICATION: Pharmaceuticals, chemicals, cosmetics, food, dietetics, medical devices, manufacturing. MAIN FEATURES: Easy-to-use tube filler with quick format changeover. Excellent access for cleaning and maintenance. Fast interchangeability of formats. . The machine is equipped with a pipe form with a diameter of 50 mm, other parts in tubular format are also ava ...

Description:  , GENERAL MACHINE DESCRIPTION: A. Roller Conveyor for cell entry B. Machine for aluminium adhesive tape winding and cutting. C. Nr. 2 machines for butile adhesive tape application, tube and polietilene adhesive tape wrapping around and for aluminium tube end cutting. D. Machine for aluminum tube coining. E. Machine for internal tube diameter calibration on one or both ends. F. Pick-up for cell moving on single machines or from machines to roller conveyors. G. Conveyor for worked cells unloading.  , DIMENSIONS OF CELLS  , This sytem is projected to work cells type: COMBI BOTTOM and COMBI TOP.  , NOTE: Machine is not under power, already dismantled. Approx. Onsite Dimension. (l x w x h): 15,000 x 15,000 x 6,000 mm, weight approx.: 50,000 kg

CONTROLS   PLC SIEMENS S7-400 FEEDSTOCK TUBE   external diameter min.: 22 mm   external diameter max.: 90 mm   length min.: 6000 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 17.5 mm   external diameter max.: 80 mm   length min.: 7000 mm   lenght max.: 13500 mm CHARACTERISTICS DRAWING MACHINE   force: 1000 kN   drawing length max.: 13500 mm   number of parallel trains / strands max.: 3   speed max.: 67.5 m/min   main drive power: 800 kW Modernized:2011 new drawbar mouth2019 new collar bearing, draw bench chain and gearbox2021 new front benchPulling capacity+ 1-fold: 500kN, no short-term overload+ 2-fold: 1000kN, no short-term overload+ 3-fold: 1000kN, short-term overload 1300kN + Rohrbremse Attachments: + tube brake m ...