tube used for sale

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 255.43 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with barrel grinding wheel can be exchanged for polishing wheel. Shipping Please inquire with location and postcode. VAT not deductible .

Unused ultrasonic sealer for plastic tubes. Power supply (V/Hz) 230/50 Operating frequency (kHz) 20 Sealing width (mm) 80 Power (W) 1500 Size of work surface (mm) 300 x 325 Dimensions of device (mm) 1100 x 650 x 530 Weight of device (kg) 75 Horizontal ultrasonic sealling machine for tubes of thermoplastics (PP, PC, PU, PA, PBT, PES, PVC, PM, etc.) with adjustable: welding time, sonotrode descent speed, welding pressure, welding depth, number (count) of welded tubes. The heat needed for ultrasonic welding is obtained by vibration of material particles.

Forms spiral tubes 1 Sutter Alpha 1 from diam 120 to 1550 thickness from 4 to 12/10 of galvanized sheet Complete with automatic cut 6 m double revolving reel Tapes from 88 to 133 mm can be used.

The machine is in very good technical condition, approx. 60-80 engine hours worked, inspection possible by agreement. Technical data: Sheet thickness without pre-bending - 6mm Working length - 3100mm Diameter of the upper cylinder - 200mm Diameter of the side cylinder - 190mm Motor power - 4kW Description: The side cylinders can be tilted from the control panel Hydraulic motors are located directly on the cylinders without transmission The cylinders are hardened and ground The machine is adapted for conical bending The smallest rounded diameter is equal to 1.1 times the upper cylinder

Pipe bending machine Model: SW50, in good working order, manufactured by ZHANGJIAGAG HUAFANG MACHINERY. Maximum bending capacity 50 × 2 mm Bend radius 38~200mm Center distance of two arms 190 ~ 1600mm Bend Angle 0~185° Bending accuracy ±0.2° Main engine power 7.5 kW Hydraulic pressure in the system 12 MPa Year of release: 2019 Year of commissioning: 2019 Year of decommissioning: 2023 Dimensions: 2700mm(length)x1000mm(width)x1500mm(height) Weight: 1500 kg

Description: Serial no. 7157008 3kW motor power 2,800 rpm motor speed 100mm x 2000mm belt size 30m/second belt speed 20mm – 76mm diameters 30° – 90° grinding angles 380mm x 100mm graphite layer 160mm x 70mm adjustable slide 198mm drive wheel diameter Please see attached PDF for further information. table rotation speed: 2,800 rpm, total power requirement: 3 kW, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,200 x 700 mm

Description: Shaft diameter mm 140 Standard roller diameter mm 440 Roller speed m/min 5 Motor power (Y400 v) kW 15 Number of drive rollers / type 3 heddles Working position Horizontal Roller adjustment Hydraulic weight approx.: 4,700 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,650 x 1,900 mm

-Discontinued - Hinge dimension 100 x 2000 mm - Grinding diameter 20 - 76 mm - Sands all common materials - Easy operation due to rotatable device - Grinds any desired angle 30° - 90° - Sands any desired diameter from Ø20 to Ø 76 mm - Suitable for pipes and profiles - Powerful motor with 3 kW - Incl. 2 sanding belts 100 x 2000 mm grit 36 If you are interested, we will be happy to send you our complete data sheet.

Description: Machine number: 551 Power: 1000 W For pipes up to max. 35 mm diameter (Attention: see photographed technical plate as wall thickness plays a role) With accessories as shown in the pictures weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 700 x 600 x 400 mm

weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 260 x 1,200 mm

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - Blank tube magazine incl. tube feeding chute for autm. Entering the blank tubes - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 19mm - 50mm tube diameter - Cycle rate 15 - 30 tubes/min. Depending on product Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

General SKU279M283 LocationBarneveld Makeonbekend, typeplaat ontbreekt Material Shell materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11.3 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface11,3 m2 Tube capacity±42 Ltr. U-typecheck Number of tubes:178 Tube diameter15mm Tube length1350mm Shell diameter325mm Shell length1450mm Shell connections1x dia. 65mm, 1x dia. 110mm, 1x dia. 45mm Cover connections2x dia. 60mm Information Floorspace2,0x0,65 M Total height0,65 M Weight250 KGShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU169K559 LocationBarneveld Makeunknown Year of constructionunknown Material Shell materialStainless steel Cover materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface39.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger/Steam generator (1x) Heating surface39,5 M2 Number of tubes:168 Tube diameter25mm Tube length3000mm Shell capacityunknown Shell diameter1200mm Shell length2600mm Information Mounted on legscheck Floorspace4,0x1,5 M Total height2,5 MShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU050C389 LocationBarneveld Makeunknown, manufacturer tag is missing Material Shell materialStainless steel 1.4401 (316) Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface1.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface± 1,5 m2 Number of tubes:25 Tube diameter24mm Tube length± 900mm Information Floorspace2,2x0,7 MShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU214W270 LocationBarneveld MakeQVF Glasstechnik TypeS-ROB71/300/SH/3/SIC No.98072a Year of construction1998 Pressure Vacuum possiblecheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface7.1 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface7,1m² ( in use 4,2m²) Tube capacity40 Ltr. Number of tubes:97 Tube diameter14 mm Tube length1980 mm Wall thickness tubes1,5 mm Max. temperature+150°C Shell capacity113 Ltr. Shell diameter300mm Shell length1800mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN150, DN200 Cover connectionsDN50, DN80 MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information Total height0,42 m Weight280 kg Floorspace0 ...

General SKU214W271 LocationBarneveld MakeQVF Glasstechnik TypeS-ROB64/300/SH/2/SIC No.98075 Year of construction1998 Pressure Vacuum possiblecheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface6.4 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface6,4m² Tube capacity33,7 Ltr. Number of tubes:164 Tube diameter14 Tube length±850 mm Wall thickness tubes1,5 Max. temperature+150°C Shell capacity46 Ltr. Shell diameter300mm Shell length850mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN150, DN50 Cover connectionsDN80 MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information Total height0,42 m Weight190 kg Floorspace0,42x1,40 m Technical specs  ...

X working range max .: 6500 mm Y Working range max .: 200 mm Control: SIEMENS SINUMERIK 840D Laser power: 3600 W Beam on: 12.222 h Plate thickness St. Max .: 10 mm Plate thickness Va. Max .: 6 mm Plate thickness Al. Max .: 5 mm Standard configuration: Machine - Working range in X-axis for tubes 6500 mm - Outer circle diameter 200 mm - NitroLine - FocusLine - SprintLine - Laser power control - Programmable cutting gas pressure - Programm re-entry - Automatic shut-down device - Work area lighting Laser - Laser logbook function - Chiller Laser Cutting head - Lens cutting head with 155 mm focal length - ControlLine Controll - Sinumerik 840D - Teleservice Data Transfer - RJ45 network connection, USB-Interface Safety - CE marking - Multi-beam light barriers - Compact dust extraction unit 1500 Nm³/h - safety cabin with Macrolon panels Additional equ ...

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 13mm - 50mm tube diameter - Cycle rate 10 - 15 tubes/min. Depending on product and operator Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

General SKU383U1044 LocationBarneveld MakeNabertherm TypeRS 170/750/13S H2 No.232933 Year of construction2012 Pressure Vacuum possiblecheck Main Features MaterialGlass Volume25 Ltr. Max.temp.1300 °C Specified Features - Drying oven Drying ovencheck Vacuum drying ovencheck Max. temperature1300°C Number of compartments:1 Capacity±25 Ltr. Internal diameter115 mm Internal width2380 mm Electric heatingcheck Electric capacity13,5 kW, 400 volt Number of doors:1 With air circulationcheck With fancheck Suitable for nitrogencheck hydrogen With timercheck MaterialHeat-resistant stainless steel 1.4767, Glass Information Mounted on frameOn wheels With switchcheck Weight900 kg CEcheck Floorspace2,90x1,30 m Total height1,6 m Extra SpecificationsThe RS tube furnaces can be used for horizontal operation. This professional tube furnace can be optimally configured fo ...

General SKU394U1150 LocationBarneveld MakeGAB Neumann TypeN-B-11.5/GMP No.16754-13691 Year of construction1990 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell4 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Graphite Surface11.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface11,5 m² Tube capacity44 l Max. temperature-10°C / +180°C Shell capacity44 l Shell diameter705 mm Shell length1440 mm Max. temperature-10/+180°C Shell with expansion jointcheck Shell connectionsDia. 80 mm (2x) Cover connectionsDia. 200 mm, Dia. 100 mm MaterialGraphite Information Total height1,75 m Weight950 kg Floorspace0,85 x 0,85 mNew arrivalsShell and tube heat exchangersGab NeumannNew arrivalsHea ...

Standard configuration Machine ? Solid machine frame with integrated laser resonator ? Feed station with self centering clamps ? Automatic tube support for raw material ? Feeder claws with self centering parallel collet chuck ? High-precision motors: Digital 3-phase servo motors with high precision of the drive axes. ? Part removal station PRS 3001 with brush table, finished parts up to 3000 mm long ? Tube support for finished parts with wheel-away guide rollers ? Enclosed beam delivery ? NitroLine ? FocusLine ? SprintLine ? Laser power control ? Programmable cutting gas pressure ? Automatic shutdown device ? Work area lighting TRUMPF laser ? CO2 laser TruFlow 2000 ? Radio-frequency excitation ? Maintenance-free radial turbine blower ? Laser control TASC 3 ? Laser log book function ? Chiller Cutting head ? Laser cutting head with 155 mm (6?) lens ? ControlLine Control ? Sinumerik ...

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm

Oto mills 127mm x 5mm HF Tube Mill with Packaging Line Make: Oto Mills Year New: 2000 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Material Strength: 360 – 510 MPa Tooling: 17 sets, Round, Square, Rectangular Entry Coil Car Floor Standing V-Type Design Powered Traverse & Lift Mandrel Uncoiler Powered Expansion Powered Hold – Down Roll Sliding Base Feed-Up Motor Shear & End Welder TIG Power Supply Mechanical Shear Driven Pinch Rolls Coil Straightening Machine Horizontal Accumulator Entry & Exit Pinch Rolls Coil Feeding Unit Variable Speed Drive Forming Mill Shaft Diameter: 80mm Eight (8) Forming Stands Seven (7) Side Forming Stands Horizontal & Vertical Stand Adjustment Individual Gear Boxes Universal Drive Variable Speed DC Motor Drive 300Kw High Frequency Welder 3-Roll Adj ...

Oto Mills 127x5mm HF tube mill Make: Oto Mills (Italy) Year New: 1999 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Tooling: Round, Square, Rectangular Entry Coil Car Shear & End Welder Driven Pinch Rolls Coil Straightening Machine Pit Type Accumulator Forming Mill 250Kw Emedi High Frequency Welder 2-Roll Adjustable Welding Box Cooling Section Sizing Mill Four (4) Adjustable Turk Heads Cut – Off Type: Flying Saw Driven Exit & End Tables Electrics, Hydraulics, Controls, Lots of Tooling, Drawings & Manuals, Spare Parts Line is still installed but not operational. Possible to inspect

Sputter target, tube, pipe -Tube dimensions: Outside: Ø 152 mm Inside: Ø 125 mm Total length: 3249 mm -Number: 2x pipes available -Price: Complete -Incl. Transport box -Dimensions box: 3600/570/H585 mm -Weight: 306 kg

This TRUMPF TruLaser Tube 7000 Tube Laser Cutting Machine was manufactured in the year 2010 in Germany. It is equipped with a 3.6 kW TruFlow CO2 Laser. Check photo and video gallery for further details. Contact us anytime for more questions!

This TRUMPF TruLaser Tube 5000 laser cutting machine was manufactured in 2016. Its equipped with a Co2 Laser Truflow 2000 offering high frequency excitation and a maintenance-free turboradial blower, enhancing operational reliability and efficiency. The laser features precision capabilities, such as a lens cutting head with a 155mm focal length and advanced control features like SINUMERIK 840D SL. The machines versatility is evident in its clamping jaw sets for various diameters and molded shells for different shapes, including round and rectangular tubes. The TRUMPF TruLaser Tube 5000 machine we have for sale is adept at providing high-quality cuts for diverse applications. Contact us for further details regarding this laser cutting machine.

Qty. 1 Second-hand hardening and tempering tube furnace Type of furnace: Roller Hearth Type Hardening & Tempering Furnace Line Mfc.: HANJUNG FURNACE TECH Built: 2012. Effetive Size: Hardening Furnace: ø2380 mm x 57800 mm Shifting rolls: 34 sets Tempering Furnace: ø2380 mm x 61200 mm Shifting rolls: 28 sets Capacity: Max. 30 Ton/H Normal: 25 Ton/H Pipe Dia. 76 – 305 mm (3" ~ 12") Total power: 700 kW Heat Treatment: Quenching & Tempering Normalizing Scope of supply: Charging Table Hardening Furnace Quenching Transfer Conveyor Tempering Furnace Entry Conveyor Stock Conveyor Water Cooling System Control System Exit Conveyor Quenching Tank Discharging Conveyor

Arenco Model: GAB metal tube filler, single filler, manual load/unload, 30L stainless hopper, 24 pockets on rotary conveyor

The machine is in very good condition Control Unit: PLC with touch screen Feeding: Automatic Product can be filled: Liquid or cream, gel Filling Capacity: 10 ml to 500 ml Capacity: 700-1200 pieces per hour stainless chrome Tube closing system: Ultrasonic

This TRUMPF TUBEMATIC 3.2 kw Laser Cutting machine was manufactured in the year 2003. The machine has a Max. tube material length of 6500 mm.

Tube mill production line 76x3mm (A3757) Make: Italy Year: 2007 overhauled metal thickness: 0.8-3.0mm maximum pipe diameter – 76mm Line includes 19 moulds for different pipe diameters production Round pipe: 48,42,60,75 L type: 30×30, 38×38, Half round pipe: 45, 60 Oval pipe size: 60, 20×38 Rectangular pipe sizes: 30×30, 40×40, 40×20, 20×38, 30×40, 60×40, 70×30, 80×40, 60×60

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5" - 16" Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out  ...

Standard configuration ? Solid machine frame with integrated laser unit ? CO2 laser TLF 2700, radio-frequency excitation, chiller ? Motors: maintenance-free 3-phase servo motors ? NitroLine High pressure cutting ? High-speed processing with SprintLine ? Programmable cutting gas pressure ? Laser cutting head with 5 lens, DIAS III ? Cutting head-quick change device ? ControlLine ? Laser power control ? Laser logbook function ? Automatic shutdown ? Work area lighting ? Sinumerik 840D control: Open PC-based control system, easy to use, Online help, diagnostic functions, maintenance logbook, technology data,Teleservice, 3.5 floppy drive, RJ45/BNC network connection ? Safety: Multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber exhaust system and compact dust extractor, safety cabin with Macrolon panels ? Part removal station PRS 3001  ...

Rasmussen spiral tube finning machine

Rasmussen spiral tube finning machine

Alu-Tube 160x10x1400mm for Cooling Cylinders in Printing Machines

Rofin StarCut Tube Fiber Stent Cutting System Used Year of construction : 2012 Lasers For cutting almost all metal alloys and plastic compounds commonly used in medical technology. Pictures will follow !

TOTAL LOT ONLY. Stainless steel 321 seamless pipes/tubes. Brand: MAXIM Model: Seamless C.F. Tube 19.05MM x 1.63mm THK (MW) SA 213 TP-321 HEAT NO: A-98142 The tubes have a length of +- 5.5M each. Good for high pressure and heat.

TOTAL LOT ONLY. Stainless steel 321 seamless pipes/tubes. Brand: MAXIM Model: Seamless C.F. Tube 19.05MM x 1.63mm THK (MW) SA 213 TP-321 HEAT NO: A-98142 The tubes have a length of +- 5.5M each. Good for high pressure and heat.

This TRUMPF TruLaser Tube 5000 Laser cutting machine was manufactured in 2010 in Germany and has 16681 laser hours (63477 Operating hours). Dispose of a Trutops (version: 17.0.0.161) used Software. This machine has these laser gas consumption (Purity): He (4.6): 13 l/h, CO2 (4.5): 1 l/h, N2 (5.0): 6 l/h.

Used machine in good condition. Available for immediate delivery. - Max. outside diameter of round tubes: 20-150 mm - Max. outer circle diameter of rectangular tubes: 20-150 mm - Max. finished part length: 6.500 mm - Laser Output: 2.700 kW - Laser Type: CO2 - Maximum material thickness mild steel: 6,4 mm - Control: SIEMENS SINUMERIK 840 D - Dimensions (long x wide x high): 18.000 x 9.000 x 2.800 mm - Weight: 17.700 kg

Baltographe, Baltograph -Dimensions: 715/270/H410 mm -Weight: 6500 kg

Maker: MayungJin, Kore Welder: China Electric controller: Korea Year: 2005 Pipe diameters: 50-145mm Wall thickness: 1.5-6.5mm Line speed: 60m/min Welder capacity: 500kW Line direction: left to right Line consist of: -uncoiler leveller -shar welder -accumulator -pipe forming -pipe welding -pipe sizing -pipe cutting -run out table -pipe end facer There is list of tools available: 76.3; 77,4; 90; 106; 108; 116.9; 127.3; 137.5; To get more information about machine please contact our sales deparment

Vertical packaging machine for pre-made tubular film. The machine features a simple production process, as the tubular film only needs to be vertical-sealed. - Specifications: Bag dimensions: max. bag length 500mm, bag width 200-350mm | bag shape: pillow bag | suitable tubular film material: PE | suitable film thickness: 0.06-0.12mm | max. speed of the machine in neutral: 15 cycles/minute | stainless steel SUS 304 | 220V/0.4kW | 6bar, 0.6m?/min | machine dimensions: L880xW1150xH1170mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

• 10-track for thermal foils, max. temperature 220°C • Intermittent operation • Output max. 45-50 cycles/min (450-500 sticks/min) • Volume dosing (10 dosing slides) for mini tablets/granules/powder free-flowing 250 -1500 mg/bag • Bag lengths adjustable 50-155 mm • Bag widths depending on format set, with format set for belt width per bag 46 mm, finished bag width 18 mm • Product suction via Piab Vacuum Conveyor • 10 hot-stamping units Schmucker PL 1B MB, single-line, 17 types • Cutting knife for tear notch • Horizontal knife • Ionisation unit Haug for ionisation product infeed • Dust extraction • Outfeed belt 10-lane, e.g. for connection to 10-track 100% checkweigher (see our item no. 10-0219) • Lateral conveyor belt for bad bags • Transport trolley for film reel • PLC Siemens S7-300 • Electr. connection 380V/50Hz