tube rollers used for sale

1100.932 A Pastry forming roller Kalmeijer KGM NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1100.932 A Details see picture PLUS POINTS Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

1100.936 A Pastry forming roller Kalmeijer KGM NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1100.936 A Details see picture ADVANTAGES Heating of the figure roller, no flour sprinkling and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1120.925 A Pastry Forming Roller Standard Rollers 250mm NEWÂ Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1120.925 A Details see picture ADVANTAGES Heating of the figure roller, do not sprinkle flour and thus better baking method Change of the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1120.922 A Pastry forming roller Standard rollers 250mm NEWÂ Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1120.922 A Details see picture PLUS POINTS Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within a minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Pastry Forming Roller Kalmeijer KGM NEW 1120.930 A Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1120.930 A Details see picture ADVANTAGES Heating of the figure roller, no sprinkling flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Freezer Trolley Castors Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)Wheel à ̧ 80 mmin heavy version resistant -30 to +80ÂC  Data:Wheel à ̧: 80mm Wheel width: 28mm Hole à ̧: 12mm Overall height: 106mm Load capacity: 150Kg per roller  ́s see picture 

Freezer trolley castors swivel castors à ̧ 100mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)with brakeWheel à ̧ 100 mmin heavy version resistant -30 to +80Âcâ  Data:Wheel à ̧: 100mm Wheel width: 28mm Hole à ̧: 12mm Height: 128mm Load capacity: 150Kg per roller ́s see picture 

Freezer trolley castors swivel castors à ̧ 100mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)Wheel à ̧ 100 mmin heavy version resistant -30 to +80ÂC  Data:Wheel à ̧: 100mm Wheel width: 28mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 128mm Load capacity: 150Kg per roller ́s See picture for details 

Freezer Trolley Castors Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)Wheel à ̧ 80 mmin heavy version resistant -30 to +80Âcâ  Data:Wheel à ̧: 80mm Wheel width: 28mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 106mm Load capacity: 150Kg per roller Details see picture

Freezer Trolley Castors Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)with brakeWheel à ̧ 80 mmin heavy version resistant -30 to +80ÂC  Data:Wheel à ̧: 80mm Wheel width: 28mm Hole à ̧: 12mm Overall height: 106mm Load capacity: 150Kg per roller  ́s see picture 

Freezer trolley castors swivel castors à ̧ 100mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)Wheel à ̧ 100 mmin heavy version resistant -30 to +80Âcâ  Data:Wheel à ̧: 100mm Wheel width: 28mm Hole à ̧: 12mm Overall height: 128mm Load capacity: 150Kg per roller  for details, see picture ́s 

Freezer trolley castors swivel castors à ̧ 100mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)with brakerWheel à ̧ 100 mmin heavy version resistant -30 to +80 Âcâ Data:Wheel à ̧: 100mm Wheel width: 28mm Overall height: 128mm Load capacity: 150Kg per roller  Details see picture 

Freezer Trolley Castors Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Swivel castors with (bright galvanized)with brakeWheel à ̧ 80 mmin heavy version resistant -30 to +80Âcâ  Data:Wheel à ̧: 80mm Wheel width: 28mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 106mm Load capacity: 150Kg per roller ́s see picture for details 

4.500 kg load capacity heavy duty swivel castor , lockable every 90 ° on the circumference , roller and swivel bearing ball bearing , polyamide roller 80 x 200 mm, contact plate 20 x 200 x 260 , total height 290 mm , holes 18 mm , available are 32 pieces each 250 €

Production number: K1081568 Operating voltage: 3 x 400 V Nominal current: 181 A Frequency: 50 Hz Connection: 90 kW incl. rolling devices 5 devices with working length: 4400 mm also powder coating systems from the manufacturer RAPP incl. light barriers Auction-ID: A7-49089-415

We sell SKF 24036CC spherical rollers or SKF NJ 2228 ECML ball bearings unused items

Machine number: 18,307 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 245 A Cooling water pressure: min. 3 bar/max. 8 bar Cooling water volume: 70 l/min incl. gripping system and powder coating from the manufacturer RAPP Control: SIEMENS Auction-ID: A7-49089-242

Includes 2 banding rolls in packaging. Auction-ID: A1-49846-323

Won't work, won't start, wiring harnesses burned Auction-ID: A1-49695-101

Manufacturer: S.M.A.R.T. Machine Type: Thread Rolling Machine Model / Type: NGP DD Year of Manufacture: 2008 Technical Specifications - Voltage / Tensione: 3 x 480V + N - Power / Potenza: 55 kW - Current / Corrente: 100 A - Frequency / Frequenza: 50 Hz - Auxiliary AC / Ausiliari A.C.: 115 V a.c. - Auxiliary DC / Ausiliari D.C.: 24 V d.c. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze für Heidelberg SM XL 105 New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller for Heidelberg SM XL 105 0902004 A 1812 (x5) - Neue Farbübertragswalze / New Ink Transfer Roller - Sach Nr. F2.009.120F/07 - Kennz. ROT 0902014 A 1405 (x2) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1404 (x1) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1411 (x1) - Feuchtauftragswalze - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902012 A 1405 (x1) - Feuchtdosierwalze Pro Aqualis - Sach Nr. F2.030.510F/03 - Kennz. OHNE

Manufacturer: Pee-Wee Model: UPW 24 Type: Thread Rolling Machine Year of Manufacture: 2009 Weight: 2400 kg Rated Voltage: 400 V Control Voltage: 24 V Frequency: 3 Ph / 50 Hz Rated Power: 12 kW Rated Current: 32 A Fuse: 32 A Compliance: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40

Pipe Thread Cutter - For threads 1/4\" to 4\" - Footswitch - 2. Threaded jaw holder - Incl. cutting jaws see pictures Auction-ID: A7-50084-63

Sheet metal bending machine with special dimensions: - Capacity 1050 x 1.5 mm - Roller diameter 55mm - Swing-out upper roller - Machine weight 180 kg Dimensions approx. 1.4 x 0.8 x 1.2 mm Auction-ID: A7-50084-41

Tru-Turf R52-11TC Golf Greens Roller – 2016 – 132 cm – including new rollers Specifications: Brand: Tru-Turf Type: R52-11TC Golf Greens Roller Year of construction: 2016 Production date: 03/2016 Serial Number: UST1801 Working width: approximately 132 cm Engine: Honda 1-cylinder 4-stroke petrol engine Engine power: approx. 4.8 kW / 6.5 hp Transmission: Eaton 11 hydrostatic Drive: self-adjusting duplex chain Control: joystick / steering stick Roller/Bowing System: 3-piece, contour-following Width of ironers: approx. 46 cm per section Drive roller: flexible, vulcanized rubber-coated Ground pressure: approx. 22.4 kPa Weight: approx. 325 kg Transport weight according to factory data: approx. 360 kg Features: Patented triple offset ironing roller system Contour-following flexible drive roller Hydrostatic drive Joystick control Driver's seat with armrests  ...

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1170 mm -Wall thickness: 17 mm -Length: 4340 mm -Weight: 476 kg/m

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1010 mm -Wall thickness: 10 mm -Length: 4770 mm -Weight: 248 kg/m

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 810 mm -Wall thickness: 25 mm -Length: 4820 mm -Weight: 486 kg/m²

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1250 mm -Wall thickness: 18 mm -Length: 920 mm -Weight: 519 kg/m

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1420 mm -Wall thickness: 12,5 mm -Length: 920 mm -Weight: 434 kg/m²

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 560 mm -Wall thickness: 16 mm -Length: 2880 mm -Number: 3x steel pipes available -Price: per piece -Weight: 214 kg/m²

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1050 mm -Wall thickness: 25 mm -Length: 2210 mm -Weight: 642 kg/m

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Handover: in its current condition as inspected -Condition: the steel pipe is bent -Diameter: 1220 mm -Wall thickness: 18 mm -Length: 10,000 mm -Weight: 520 kg/m²

Used tube-in-tube pasteurizer, made by Bucher, model: PWAP 12000 -S. New: 2016. Capacity: 10.000 - 12.000 liters / hour.

Consisting of various types and sizes of tube and tube material. Longest length approx 7000mm Auction-ID: A1-49875-126

Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice /  ...

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

Original MINGORI® Model OB40 - Mobile hydraulic tube bending machine with manually operated hand pump, suitable for bending pipes according to DIN, API and ASA standard, as well as coated PE-HD pipes. The machine works in the compression bending process. The greatest surmountable material resistance torque that can be overcome with the machine is about 28 cm³. Maximum bending force 18 tons Maximum bendable pipe diameter 88.9 mm Smallest possible bendable pipe diameter 17.2 mm Smallest bending radius depending on the radius of the bending punch from 46.5 mm to 330 mm Smallest bending angle 110° (this machine also available for bending angles up to 180°) Weight of the basic machine approx. 140 kg The machine is delivered in a storage chest – Dimensions of the chest approx. 102 x 32 cm x H 41 cm Weight basic machine 140 kg With electrically operated hand pump (as mo ...

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

- Guide tube MWM 12135199 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies an ...

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

3 Qty.1 Second-hand Tube Expander Unit Built: 2012 Model: ABO Tube diameter: 500 mm-2540 mm

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!