tube line used for sale

consisting of: tilting table, Fabr. HEGLA, type: ART6032, built in 2005, Ser no. E7662, net weight: 3,900 kg, surface layer unit, cutting table with cutting bridge, Fabr. HEGLA, type: VSG A46-MT, year 2003, Ser-No. 2118, footprint: approx. 3200x7000 mm, dead weight: 11,000 kg, max. working pressure: 6 bar, with control unit, lattice housing and light barrier system

Circulation Coin Saxony Albertine Line 4 Pfenninge 1809H AKS47

Line for painting door glass, consisting of: - automatic loader with flap arm equipped with LOGLAS 16.30 suction cups - automatic loader with bridge structure, programmed picking on LOGLAS/CL 16.30 trolleys - automatic oscillating spraying machine FALLENGLASS 1700 - year 2007, with belt conveyor covered with paper, complete with inlet roller conveyor extension with oscillating and ionizing blower unit - PRE-HEATING OVEN in-line with lower infrared lamps PRE/I-NIR - 180° sideshift with ventilated transversal flash-off oven with CEFLA GT180/3400/5500 air-heating coil - in-line drying oven with hot air and infrared lamps GLASSOVEN EL/7 - year 2007 - cooling tunnel with upper and lower air curtains CEFLA GLASSCOOL SI-3/3 - year 2007 - motorized conveyor VTR 2500 - automatic unloader on trolleys with CEFLA bridge structure UNLOADER -WASHING MACHINE NOT PRESENT- Auction-ID: A7-454 ...

Complete falling film vacuum evaporator, previously used for skimmed milk or sweetened whole milk, consisting of a 4 effect TVR Evaporator. Still mounted in the cheese plant in Spain till end of April 2026. The product feed rates in the installation are ± 14 t/h with a comparative temperature between 73 and 50°C from the 1st to the 4th effect., Processing rates used by the current plant for skimmed milk:, - Infeed flow: 14.000 kg/h @ 9% DM, - Infeed temperature: 5 °C, - Water Evaporation: 11.375 kg/h, - Outfeed flow: 2.625 kg/h @ 48% DM, - Steam consumption: 2.050 kg/h, Processing rates used by the current plant for sweetened whole milk:, - Infeed flow: 14.000 kg/h @ 25% DM, - Infeed temperature: 5 °C, - Water Evaporation: 7.637 kg/h, - Outfeed flow: 6.363 kg/h @ 55% DM, - Steam consumption: 1.375 kg/h, Approximately operating temperatures:, - First effect (steam side): 73 °C, - Fir ...

Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc) ...

Condition: Used Stock Number: 875B Marel Masterslice Type: TA1511 Marel Masterslice Serial number: 10090783 Marel Masterslice Year of construction: 2011 Marel Masterslice Outfeed conveyor 170 mm wide Marel Masterslice Dimensions: 2100 x 1000 x 1500 mm Marel Masterfill Type: TA1516 Marel Masterfill Year of construction 2011 Marel Masterfill Dimensions: 1000 x 750 x 1200 mm

Equipped with Pehu 320DSTV graphics control, size base machine approximately 1800x1560x2250mm, on primeval track already disassembled on and including 1 pallet Auction-ID: A1-45188-166

Longitudinal cutting line for sheet metal coils, consisting of: - 1 decoiler with loading trolley - 1 cutting head - 1 hole passage table - 1 pneumatic press with felt - deburring rollers - 1 x 1-arm discharge flag EXCLUDING trim winder Technical data: Maximum cutting width 1200 mm Strip thickness from 0.30 mm to 1.20 mm Line working speed 180 mt/min Maximum coil weight 6,000 kg Coil OD up to 1200 mm Electrical panel upgraded in 2016 DOCUMENTS, MANUALS and LAYOUTS NOT AVAILABLE MANUFACTURER, MODEL AND DATE OF CONSTRUCTION NOT DETECTABLE MACHINE NO CE Auction-ID: A7-45688-1

Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                         ...

Pastry line Seewer Rondo SPF 602 Condition: used, functional Year of Make: 2000 Calibration head, built in 1996 Cutting station Sprayer Filling station Guillotine Incl. cutting tools

Compact roll line WP Rollprofi Year of Make: 2005 Condition: repaired, cleaned & checked Suitable for the production of sliced rolls, smooth rounds, long-rolled rolls and double pieces Weight range: 30-85 g Hourly output: max. 3,750 pieces 4-row system with 600 mm working width Integrated dough divider and drum rounder, Multimatic Pre-proofing time 12 min (6 min in front of long roller station and 6 min between long roller and cutting station) Hanging drying Maintenance-free suspension chain with automatic tensioning Variable depositing device for digestate carriers of the 3

Dough sheeter WP Kemper Quadro Relax S Modular high-performance roll line for processing roll dough with long pre-proofing Head machine with dough strand former, 2x flour shaker, RelaxS roller mill, SoftCut weighing knife, stamping station and extendable and cleanable EasyPull conveyor belt Products: square biscuits (TA: max. 170) Weight range: 25 to 1000 g/pc (depending on the knife roller) Capacity: max. 800 kg dough/h Hourly output: max. 10,000 pcs/h (with 5-row operation) Working width: 800 mm Depositing device with take-off length max. 2000 mm Touch Screen Control

Works perfectly Full line Panel press Oil heating Power 31kw 250/130cm Automation of press entry and exit Ejector to moulder for example ORMA SC2R-300 gluing machine at press infeed 380V Auction-ID: A3-43511-36990

Bulk of food packaging Premium LINE, disposable knives, forks, spoon cups, cups, salad bowls, bowls, sausage plates, aluminium packaging, bowls with lids, soup bowls, paper plates, coffee cups, coffee spoons, chicken bags and delicatessen bags Auction-ID: A7-45677-107

Meiko Rinsing Line + Disinfection - Automatic Topline 40, Year 2020 unused! With dishwasher + 3 spout basins, ready to connect, VDE tested Auction-ID: A7-45677-83

Meiko Dishwashing Line + Disinfection - Automatic Topline 40, built in 2020, with a spout basin + sink base cabinet + wall shelf, ready to connect, VDE tested Auction-ID: A7-45677-85

Length 7 meters, extendable behind part 150cm total 850cm. Concerns trailer from 2017 is unused. Auction-ID: A1-42013-89

Lot concerns container including approximately 2500 meters of ship mooring lines Auction-ID: A1-40134-337

Incl. steel measuring plate with table size 1200x800x30 mm (overall dimensions 1200x800x150 mm) Auction-ID: A1-45714-42

Equipped with: Charging cable. Reversing camera, full map navigation system, Bluetooth phone preparation, keyless entry, cruise control, automatic air conditioning, heated front seats including heated steering wheel and LED daytime running lights. ABS / Anti Lock Braking System, ESP / Electronic Stability Program, traction control & anti slip control, hill hold function, multiple airbags (front, side and head), automatic low beams, electrically adjustable, foldable and heated exterior mirrors, electric windows front, extra tinted glass, automatically dimming interior mirror, central locking with remote control and a multifunctional leather steering wheel. Auction-ID: A1-42013-181

Various pneumatic linear actuators, cylinders and ball rail guides, excluding pallet trucks Auction-ID: A1-45714-21

Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  Performance Product infeed online: max. 280 jars/min Format 3: max. 220 jars/min Mix type A: max. 140 jars/min (11.5 cartons/min) Mix type B: max. 140 jars/min (11.5 cartons/min) Total output: max. 350 jars/min or 3 ...

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

2018 Dr. Collin ZK 16 Twin-Screw Lab/Pilot Polymer Extrusion Line Overview Excellent opportunity to acquire a complete, high-quality laboratory/pilot extrusion line manufactured by Dr. Collin GmbH, an industry leader in R&D and polymer processing equipment. Built in 2018, this co-rotating twin-screw extrusion line (ZK 16 model) is specifically designed for processing plastic materials in small batches, making it ideal for research and development, testing, compounding, and new formulation development. Key Technical Specifications Manufacturer: Dr. Collin GmbH – Lab & Pilot Solutions Model: ZK 16 (Twin-Screw Extruder) Year of Manufacture: 2018 Condition: Used (Dismantled and ready for transport) Screw Diameter: ~16 mm (Co-rotating twin-screw) Power: 8 kW Voltage/Current: 400 V + N + PE / 15 A / 3~ 50 Hz Operating Pressures: Water: 4 bar / Compressed Air: 4 ...

A complete Groninger bottle filling line is available. 1) Bottle unscrambler Groninger ZSB 2000, year of manufacture: 1995. 2) Filling machine Groninger DFV 1000Q, year of manufacture: 2013, filling stations: 10, additional function: transverse transfer system, output: approx. 9000/h, dosing range: 5ml-1000ml, container height range: 30mm-250mm, transport cup dimensions X/Y: 108mm/80mm, operating hours: approx. 24100h. 3) Cap sorter Groninger ZSK 1500, year of manufacture: 1995, sorting disc speed: 25rpm. 4) Capping machine Groninger KVK 106, year of manufacture: 1995, max. capping output: 9000/min, max. container diameter: 100mm, max. container height: 200mm, machine dimensions X/Y/Z: approx. 3400mm/1450mm/2550mm, weight: approx. 1500kg. 5) Discharge conveyor Groninger, year of manufacture: 1995. Documentation available. An on-site inspection is possible.

Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, So.Te.Ma.Pack, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling mac ...

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

Depalletising and palletising system for Euro pallets with PETCYCLE crates. The empties pallets arrive via a lift from above. They first pass through a pallet denester, in which the empties are fixed, the transport securing cord is cut off and vacuumed. The crates are then destacked and transferred to the bottle ejector. The pallets continue to the pallet magazine/loader. After the pallets have been reloaded, they are secured with a cord and transported upwards in the second lift. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletising and palletising, Unloading capacity: 3600 crates/h, Loading capacity: 3600 crates/h, Power: 21 kW, Voltage: 230/400 V, Frequency: 50 Hz, Compressed air: 6 bar, 30 Nm³/h, Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 l (400 x 300 x 256 mm), 9 x 1.0 l, 6 x 1.0 l, 6 x ...

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height:  ...

LINEA ESTRUSIONE PER TUBI Estrusore monovite diametro 60 L/D 30 motore A/C 100 kW Testa di estrusione per tubo diametro 13,25 mm nr.2 viti di ricambio usate nr.2 vasche raffreddamento con pompe acqua e spruzzatori nr.2 vasche di raffreddamento statiche Marcatrice Citronix Traino a cingoli contrpposti Avvolgitore doppio PM Imnpianti nr.2 Viti usate di scorta

LINEA GRNAULAZIONE PER FILM Silos alimentazione foglia Diametro vite 130 L/D 35 Nr.1 degassaggio Potenza motore 243 kW Cambiafiltro a piastra idraulico Taglio in testa ad anello liquido Centrifuga Vibrovaglio Ventola estrazione materiale

ESTRUSORE BIVITE PER RIGENERAZIONE VITI DIAMETRO 140 L/D 32 ALIMENTAZIONE FORZATA CARICATORE LATERALE CON SISTEMA DI PESATURA PLC ERGOMEC ANNO 2012 TAGLIO IN TESTA AD ANELLO LIQUIDO FILTECH GRO 1000 VIBROVAGLIO SILOS ALIMENTAZIONE

LINEA DI ESTRUSIONE PER TUBI PPR - NR.2 ESTRUSORI DIAMETRO VITE 75 L/D 37 - NR.1 COESTRUSORE DIAMETRO VITE 30 L/D 25 - NR.1 TESTA ESTRUSIONE CON FILIERA PER TUBO 40 MM - NR.2 VASCHE DI CALIBRAZIONE MODELLO KVT 125 - NR.2 VASCHE DI RAFFREDDAMENTO MODELLO KST 125 - TRAINO A CINGHIE CONTRAPOSTE KH 125 - TAGLIERINA PLANETARIA KC 125 - RIBALTA PROFILI

DOWNSTREAM COMPLETO GREINER ANNO PRODUZIONE 2008 BANCO CALIBRAZINE DOPPIO MODELLO get.CAL 11,2– 5P/4Z – DUAL A TRAINO CON TAGLIERINA DOPPIO MODELLO get.COM 30/9-235-S/500 BANCO RACCOLTA PROGFILI DOPPIO MODELLO GTT 6,0

LINEA COMPLETA PER TAPPARELLE IN PVC Turbo miscelatore da 80 L Estrusore bivite diametro 57 L/D 22 Nr.1 Degassaggio Banco calibrazione Traino a cingoli contrapposti Punzonatrice per tapparella Taglio a sega Banco raccolta profili

LINEA GRNAULAZIONE PER FILM Silos alimentazione foglia Diametro vite 130 L/D 40 Doppio degasaggio Motore A.C 280 kW Cambiafiltro a piastra idraulico Taglio in testa ad anello liquido Centrifuga Vibrovaglio Ventola estrazione materiale

ESTRUSORE PRINCIPALE EA100/52D CO-ESTRUSORE EA48/40D CAMBIA FILTRI A PIASTRA POMPA INGRANAGGI TAGLIO AUTOMATICO TA100 AVVOLGITORE A 2 STAZIONI CON TRAINO CATTORINI Materiali lavorati: HIPS-ABS-PP (fatto dei test positivi anche con PLA) Spessore minimo 37/100, Spessore massimo 150/100

LINEA RIGENERAZIONE MONOVITE ESTRUSORE DIAMETRO 105 CON CAMBIA FILTRO E TESTA A SPAGHETTI NR.1 DEGASAGGIO VASCA DI RAFFREDDAMENTO AD ACQUA STATICA TUNNEL DI ASCIUGATURA AD ARIA TAGLIERINA PER SPAGHETTI VIBROVAGLIO BECCARIA STRUTTURA PORTA BIG-BAG

LINEA DI RIGENERAZIONE PER FILM PE ESTRUSORE DIAMTERO 130 L/D 35 NR.1 DEGASAGGIO ALIMENTAZIONE FORZATA SILOS ALIMENTAZIONE FOGLIA CAMBIA FILTRO A PIASTRA DIAMETRO 200 TAGLIO IN TESTA ORIZZONTALE QUADRO DI COMANDO

LINEA RICICLO PLASTICA TANDEM - NASTRO TRASPORTATORE CON METALDETECTOR - TRITURATORE GM 125 AF/T - ESTRUSORE MONOVITE GM 125/28D - DOSATORE MASTER DPM 15/50, gm 125, CACO3 DPM 2V SPC - CAMBIA FILTRO FIMIC RS 500 - CAMERA SOTTO VUOTO DEL SISTEMA DEGASSAGGIO - ESTRUSORE MONOVITE SECONDARIO GM 140/18D - CAMBIAFILTRO A PIASTRA GM125/200 MF - TAGLIO AD ANELLO LIQUIDO TDA 6.0 - VIBROVAGLIO VB 200

LINEA COMPLETA PER ESTRUSIONE TUBO NR.1 ESTRUSORE BATTENFLED V63 NR.1 COESTRUSORE TECNOMATIC NR.1 TESTA ESTRUSIONE PER TUBO DA 20 MM NR.1 VASCA CALIBRAZIONE BETTENFELD V63 NR.2 VASCE BATTENFELD K63 NR.1 TRAINO KUATRO PLAST KH63 NR.1 TAGLIERINA PLANETARIA GRAEWE STS 125 NR.1 RABALTA PROFILI

Line has got 2 throughfeed drilling machines Weeke 1st drill Weeke BST30/25, N? 0-259-05-3283-01-0810, 1992 Equipment: 2 x hor. Units, split drilling blocks, each with motor 1,8 kW, 13-spindle drilling blocks, centers 32 mm 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm, width 200 up to 800 mm, thickness 12 up to 40 mm 2nd drill Weeke BST30/25, N? 0-259-05-3284, 1992 Equipment: Machine prepared to take 2 horizontal units at later date 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm,  ...

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications Output: 7,800 bph Producs: Beer and CSD Formats: NRW 0.5 l 0.33 l ring neck 0.25 l LN Machine List  Machine type: Decrater Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (Screw Cap) Manufacturer: Rink Decapping in the crate Euro 0,5l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. Pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 Valves Year of manufacture: 2012 With Combi Capper 4 heads(Crown Cork and Screw Cap) Capacity: 7,800 bph Machine type: Labeling machine Manufacturer: Krones Model: Robust ...

This 3-axis WEINIG / DIMTER Unirex 2000 SPB was manufactured in 2007. It features a total power of 45 kW and operates at a nominal current of 110 A. The machine is part of a comprehensive wood production line, including a drilling and milling center, tenon cutting machine, and longitudinal profiling machine. If you are looking to get high-quality wood processing capabilities, consider the WEINIG / DIMTER Unirex 2000 SPB machine we have for sale. Contact us for further details.

Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details.

drilling machine for drilling holes at pre-programmed distances. The machine is fully operational and ready for use. working area: 4000 cm Auction-ID: A7-45896-3