tube laser used for sale

Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools

Plant for filling and packaging aluminium tubes, consisting of: Tube filling and sealing machine IWK TFS 10: For aluminium tubes (double-fold, triple-fold) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube dispensing magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 filling funnel, heatable with electric heating, 1 single-walled filling funnel 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor contro ...

• \cf1Indexed machine for double-sided offset tuck-in flap • Format range W 15 - 80, H 15 - 60, L 50 - 180 mm • Output max. 50 packs/min • Tube infeed conveyor from tube filler to cartoner, ascending, 90° angle, built in 2014 • Tube transfer station at the product infeed • Brochure folding and inserting machine, triple fold • Blind embossing printing device opposite insertion side, 2 lines, without embossing numbers • Leaflet presence and carton presence check • Bad ejection with ejection counter-check • Vacuum pump • Machine housing with safety switches • PLC Siemens S5-100 U • 220/400V/50Hz drive • Machine was overhauled by Hohenstein in 1995 and 2014 • Has worked in line with tube filling and sealing machine 02-0753, see also complete line 13-0113

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

High-speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. External tube feed lift, water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lif ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/min ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/min ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/min ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade plastic tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minu ...

Stock number: A212, Tube heat exchanger, stainless steel,, insulated., 27 pc Ø 1 product pipe,, 4 m² heating surface., Material: Stainless steel AISI 304

Stock number: A202, Tube heat exchanger, stainless steel,, lying on legs., Ø 1 product tubes,, in total approx. 20m2 heat surface., Material: Stainless steel AISI 304

Stock number: A208, Tube heat exchanger, stainless steel,, 60 pcs. Ø 20 x L 2450 mm. tubes., Estimated 9,23 m2 heating surface,, outer dimensions Ø 350 x L 2700 mm., Material: Stainless steel AISI 304

Stock number: F350, Tube closing/welding, stainless steel., Spinning type with electric heat and, water cooling., Variable speed., Prepared for dosing with bottom filling., Max. welding 70 mm., Max tube height 125 mm., Theoretical capacity: Min. 17 stroke/min., Max. 37 stroke/min., Material: Stainless steel AISI 304

Stock number: A203, Tube heat exchanger, stainless steel,, 36 pcs. Ø 20 x L 3000 mm. tubes., Approx. 6,78 m2 heating area,, outer dimensions D 375 x L 3050 mm., Material: Stainless steel AISI 304

Stock number: A205, Tube heat exchanger, stainless steel,, approx. Ø 30 mm. spiral tube., Outer dimensions D 260 x L 2810 mm., Material: Stainless steel AISI 304

Stock number: A198, Tube heat exchanger, stainless steel,, insulated, outside rivet cladding., 20,4 m2 heating surface,, calculation pressure 8 baro., D 500 x L 4450 mm. total., Material: Stainless steel AISI 304

Stock number: A201, Tube heat exchanger, stainless steel,, Spiraflo type Monotube 2/2,5-30., Ø 2 x L 3000 mm., Material: Stainless steel AISI 304

Stock number: A061, Tube heat exchanger, stainless steel,, containing:, 16 tubes, L 1900 mm each., 1 core heating/cooling., 1½ product tube., 2 double jacket, heating/cooling., 1 tube, L 1900 mm., 1½ product tube., 2 double jacket, heating/cooling., Total area 6,0 m2., Material: Stainless steel AISI 304

Stock number: A185, Tube heat exchanger, stainless steel,, OY Sanatasalo Sohlberg AB., Material: Stainless steel AISI 304

Stock number: A010, Tube heat exchanger, stainless steel,, Pasilac type RDF., Standing on legs i stainless cabinet., Ø 12 x 25000 mm product tube., Material: Stainless steel AISI 304

Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 29-0520 Year of construction 1992Brush diameter 250 mmBrush width 25 - 55 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNerg connection 380 Volt, 50 Hz- Material supportSpace requirement L x W x H 500 x 450 x 440 mmWeight 45 kgGood condition; used

Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 05-72025 Year of construction 2005Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brushSpace requirement L x W x H 550 x 450 x 440 mmWeight 65 kgGood condition; used

Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used

4 x Ceramic jacketed radiant tubes 514736 4 x Ceramic Jacketed Radiant Tubes 514736 L= 1520 mm OD= 128 mm More items - new and used - can be found in our shop! International shipping costs on request!

Tube filling and sealing machine for PE and laminate tubes, mechanical max. 60 tubes/min., built in 2000, D.35 and D.50 formats

Used Sigma P plastic tube filling machine. Technical specifications: - Type: Sigma P, - Manufacturer: IM, ACO Group - Year of manufacture: 2011, - Dose size: 3-250 ml, - Tube length: 50-250 mm, - Tube diameter: 10-50 mm, - Capacity depends on tube size, maximum capacity: 1200-2100 tubes/h, - Air consumption: 200-300 dm3/min, - Power: 3.5 kW, - Weight: 600 kg. Product contact parts are made of AISI 316 stainless steel. Other main components are made of AISI 304 stainless steel. Main machine components 1-Tube drive 2-Insertion + orientation 3-Tube sorter 4-Dosing device (pump) 5-Dosage volume setting 6-Positioner 7-Tube hopper 8-Tube hopper height adjustment 9-Intermediate hopper 10-Ejector 12-Plastic tube holder 13-Metal tube holder 14-Control panel 16-Machine frame 17-Tube heating (for plastic tubes) 18-Tube sealing (for plastic tubes only) 19-Trimmin ...

• For filling and sealing plastic tubes with heating jaws • Manual insertion and removal of tubes, further stations automatic operation • Stations: Filling, heating, sealing with embossing (1-line, max. 8 digits), cutting • Filling range 10-150 ml with piston dosing and rotary slide valve • Output approx. 100-800 tubes/h depending on product and filling quantity • Adjustable heating temperature • 10 tube holder cassettes for tube diam. max. 60 mm • Various tube holders for tube diam. 18, 22, 34, 36 and 40 mm • Electr. connection 220V/50Hz This machine is offered at a special price and sold as-is without technical inspection.

ADMV Tube feeder The machine has been used as a mascara tube feeder Siemens control panel

Mandrel tube bending machine Fabr. LONG Type EL 45 Specifications: for pipe diameters 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s electr. Connection 380 V, 2.2 kW Weight approx. 1000 kg with tools: 16 x R 76 22 x R 76 28 x R 75 35 x R 105

gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 amp; 2,5 rpm video klik hier Length: 900 mm Depth: 400 mm Height: 1100 mm Weight: 140 kg

Tube filling and sealing machine with hot air unit for filling and sealing PE and laminate tubes, Output depending on tube size, filling volume and viscosity of the filling product approx. 15-20 cycles / min. incl. cooling unit

A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.

Rieber WE-H Tube Stacker For heating, stacking and transporting a wide variety of tableware in restaurants, hotels, catering and communal catering Swap forklift made of CNS, payload max. 150 kg, with multifunctional lattice platform for different sizes of dishes, guided without tipping and misleading. Spring force adjustable. Stainless steel castors according to DIN 18867, Part 8, wheel diameter 125mm, 2 swivel castors, 2 swivel stop castors Shaft dimensions: 590 x 290 mm Thermostat controller +30 °C to +110 °C. Nominal voltage 1N AC 230V 50 Hz Weight: 55 kg Manufacturer's price 3013,- € More items - new and used - can be found in our shop! International shipping costs on request!

Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 10144179 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Bending capacity: 3/8"-2" Bending angle: 180° Angle turret: 6-fold Mounted bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1,000 x 800 x 950 mm

Maximum Diameter: 630 mm

Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type Robot Packer Hours 3630 Very good condition Current setting 100 tubes /min Documentation available

Diagonal duct fan, 3x230V, 500mm, 9880m³/h, TDE 500 D4, Red Ring, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. Diagonal tube fan, 3x230V, 500mm, 9880m³/h, 1.5 KW, TDE 500 D4, Red Ring, as good as new -40% Aluminium housing and impeller 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and cond ...

Diagonal Fan, 230V, D350mm, 5000m³/h, EDR 36-0080.0658, MAICO, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, have never been used and are completely new. Diagonal fan, 230V, 960 watt, D350mm, 5000m³/h, Type EDR 36-0080.0658, MAICO, new Overall length 397mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and cour ...

IWK TFS80-1/TZ204 tube filling line for processing tubes made of aluminium, PE, PP, PVC, PE laminate and aluminium laminate consisting of IWK TFS80-1 tube filling and closing machine for possible tube diameters 11 to 60.0 mm, total tube length from 60.0 to 285.0 mm, tube shell length (cylindrical length) from 50 to 250 mm, filling volume with corresponding dosing pumps from 1.0 to 400.0 ml, 26 tube holders, tube holder pitch 110.0 mm, tube orientation, pre- and post-gassing with nitrogen, double folding of aluminium tubes and hot air sealing for plastic tubes, Domino D Series CO2 laser coder for marking the tube fold with the variable data with DPX 1000 laser extraction system, electrical connection 3x400V/50Hz/3Ph, power 16.0 kW, machine net weight approx. 2400 kg, machine output up to 100 tubes/min., including IWK TZ 204 fully automatic tube feeder for cylindrical tubes, possible tube  ...

Pipe grinding machine - self-made - Pipe grinding machine with CE marking - Suitable for grinding or surface pretreatment of various pipes - was used for galvanized steel pipes as a surface pre-treatment before painting - could be converted for other materials (other abrasive belts + possibly adjustments in the feeding system) - Control: Mitsubishi - Automatic feeding and ejection from the machine - Several pipes can be fed and ground one after the other and temporarily stored during ejection - Pipes are picked up by gripper and guided through the machine to the ejection - Incl. RL125 field extraction system for extracting the grinding dust - Compressed air is required for the function - Machine is sold without safety device - Year of construction 2011 Specifications - Min. tube diameter: 76 mm - Max. pipe diameter: 200 mm - Min. tube length: 3600 mm - Max. tube le ...

General SKU252X215 MakePharmatec LocationBarneveld CEcheck TypeRet P15680 Pressure Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel Heat exchangercheck Verticalcheck Heating surface±5m² Tube capacity67 l. U-typecheck Number of tubes:43 Tube diameter10 mm Tube length2000 mm Max. temperature200°C Shell capacity22 l. Shell diameter250 mm Shell length2100 mm Max. temperature200°C Shell connectionscheck Information No.12 1675 01 Year of construction2012 Floorspace0,75x0,75 m Total height2,2 m Weight240 kgShell and tube heat exchangersPharmatec GmbHHeat exchangers > Shell and tube heat exchangersBrand > Pharmatec GmbH What you c ...

FEEDSTOCK STEEL STRIP   sheet thickness max.: 4 mm   sheet thickness min.: 0.8 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 24.9 mm   external diameter max.: 60 mm   wall thickness min.: 0.8 mm   wall thickness max.: 4 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling system consisting of: - large coil reel - Bandschweisseinrichtung - optional: horizontal band loop - side planer - forming unit - HF welding unit - units for outside scarfing, inside scarfing - each without impeders, tooling - cooling section - calibration unit   with alternative calibration station for ovals, polygons - flying saw - chip blow unit - hexagon bundling- and binding unit optional roll-sets available for: forming section: 26,30, 32, 36, 38, 40, 44, 46, 52, 60 mm calibration section: 25, 26, 29.5, 29.89, 30, 32, 33, 33 ...

FEEDSTOCK STEEL STRIP   sheet thickness max.: 4 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 51 mm specifically suitable for the welding of USM furniture tubes -Large reel without storage-Strip welding device-Side planer-Calibrating roll stand-Forming unit-HF welding unit THERMOTOOL-Unit for scraping without tools -Cooling section-Calibrating unit-Flying saw-Removal section for manual removal-Roller sets for 19, 20, 25, 35.9, 36, 37, 40.8, 41 mm-Various accessories and machine-specific spare parts-Documentation and maintenance logs-CE declaration

• For aluminium tubes (double seam, triple seam) • 10 tube holder stations • Output 25 - 60 tubes/min • For tube diam. 11-52 mm depending on tube holder format set • Tube sheath length 50-250 mm • Total tube length with cap max. 280 mm • Dosing 2.0-400 ml depending on dosing pump • 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml • 2 cam discs • 2 filling nozzles, diam. 12 + 19 mm with anti-drip device • Tube feeding magazine • Tube centring station • Print mark control (alignment of the tube to the print image) • Under-level filling • 1-line embossing, with embossing numbers • 1 heated hopper with electric heating, 1 single-walled hopper • 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm • Contactor control • Connection 400V/50Hz • Without transfer belt to the cartoning machine • Has worked in lin ...

This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine.

• For plastic tubes (HDPL, LLDPL) • Hot air sealing • 9 tube holder stations • Output max. 40 tubes/min • For tube diam. 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosing 20-220 ml depending on dosing pump • 1 rotary valve dosing pump 10-100 ml (1 additional as spare) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling device • Print mark control (alignment of the tube to the print image) • Embossing 1 line • 2 tube holder format sets: tube diam. 25 mm, tube length 90 mm, tube diam. 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labelling machine 05-0179