tube laser used for sale

Tube Filling & Sealing Machine (Plastic) Manufacturer: SpeMaBa/Gustav Obermeyer Type: TUFÜBA 40 PE Year of Make: 2006 • For plastic tubes (HDPL, LLDPL) • Welding by hot air • 9 tube holder stations • Capacity max. 40 tubes/min • For tube Ø 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosage 20-220 ml depending on the dosing pump • 1 rotary vane dosing pump 10-100 ml (1 additional as a replacement) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling unit • Print mark control (alignment of the tube to the printed image) • Embossing 1-line • 2 tube holder format sets: tube Ø 25 mm, tube length 90 mm, tube Ø 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labeling machine 05-0179

: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 € : 209.28 € : 60 mm : 595 mm : 363 mm : 900 mm : 130 kg : 10.5 cm³ : 60 x 3 mm : 2Gas x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 4 mm : 60 x 4 mm : 64 x 4 mm : 64 x 4 mm : 60 x 4 mm : 50 x 4 mm : 35 mm : 60x30x4 stehend, 60x40x5 mm : 300 mm : 10 mm : 10 mm : 1,25 / 2,50 U/min : 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 239.23 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 555.81 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 754.45 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 € : 2009.83 € : 150 mm : 1000 mm : 1900 mm : 1475 mm : 2700 kg : 170 cm³ : 150 x 7,1 mm : 6 x 7,11 mm : 150 x 9 mm : 141,3 x 6,55 mm : 141,3 x 6,55 mm : 168,3 x 9 mm : 168,3 x 9 mm : 64 x 6 mm : 88,9 x 3,65 mm : 110 mm : 150 x 45 stehend, 150 x 6 mm : 800 mm : 100 mm : 10 mm : 1 U/min : 15 kW TCPlus Control with 7 Touchscreen Programmable bending speed for each individual bend Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 € : 180.26 € : 48 mm : 570 mm : 410 mm : 1000 mm : 110 kg : 6 cm³ : 48 x 3,5 mm : 11/2 x 3.68 mm : 54 x 1,5 mm : 50 x 4 mm : 48 x 2 mm : 48 x 2 mm : 60 x 3 mm : 64 x 2 mm : 64 x 2 mm : 60 x 2 mm : 50 x 4 mm : 32 mm : 45 x 16 stehend, 45 x 25 mm : 300 mm : 10 mm : 10 mm : 2/3 U/min : 1.5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST): SB 48M (single phase, 2 r/min) Model with TCPlus control on request MACHINE-KIT WITH TOOLS (PRICES ON REQUEST): Art.Nr. maschine tube radius SB 48M K2D SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø  ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 € : 269.18 € : 76 mm : 370 mm : 680 mm : 910 mm : 193 kg : 15 cm³ : 76 x 3 mm : 2 x 5,4 mm : 76 x 3 mm : 70 x 4 mm : 76 x 1,6 mm : 76 x 4 mm : 76 x 6 mm : 76 x 6 mm : 76,3 x 3,25 mm : 50 x 4 mm : 45 mm : 75 x 15 stehend, 75 x 30 mm : 380 mm : 10 mm : 10 mm : 1/2 U/min : 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type Robot Packer Hours 3630 Very good condition Current setting 100 tubes /min Documentation available

Additional technical specifications: • Bending capacity: 20 - 60 mm

The tube processing machine is mounted on a mobile base frame.

CONTROLS   PLC SIEMENS SIMATIC FEEDSTOCK TUBE   external diameter min.: 15 mm   external diameter max.: 70 mm   wall thickness min.: 1 mm   wall thickness max.: 5 mm   lenght max.: 7000 mm PRODUCT (PROFILE, TUBE)   length min.: 100 mm   lenght max.: 1000 mm ELECTRICAL SPECIFICATIONS   total power consumption: 7.5 kW Components: - RASACUT SC - Tube feeding system 1000 - RASAFAS 1000 - RASAPLAN XY 1000 - RASACHECK 1000 - RASACLEAN ET / Turbodry 1000 - Dust extractor

CONTROLS   PLC SIEMENS SIMATIC HMI

Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details.

CONTROLS   conventional FEEDSTOCK STEEL STRIP   sheet thickness max.: 3 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 139 mm ROLL FORMING LINE P110K I am providing the list of profiles and tubes that we used to manufacture on the TEGALNIK P110K line! Open cold-rolled steel profiles made from cold-rolled (CR) and hot-rolled (HR) strip: Steel angle profiles (Equal angles): • 15 x 15 x 1.5 mm • 20 x 20 x 1.5 mm • 20 x 20 x 2 mm • 25 x 25 x 3 mm • 30 x 30 x 3 mm Steel U channels: (Width x Height x Thickness) • 10 x 15 x 1.5 mm • 15 x 15 x 1.5 mm • 18 x 20 x 1.5 mm • 20 x 20 x 1.5 mm • 25 x 20 x 2 mm • 25 x 25 x 2 mm • 30 x 20 x 2 mm After modifying the machine, we also manufactured welded stainless steel tubes in the following dimensions using a special process: Round stainless steel tubes: • ø 16 x 1.5 mm • ø 18 x 1.5 mm • ø 20 x 1.5 mm • ø ...

Used Plastic - Tube Filling and Sealing Machine Manufacturer: TGM Type E250 MATIC Year of construction 2006 Capacity: 800 – 3,200 tubes / hour Tube height: 50 – 235 mm Diameter: Ø 10 mm – 50 mm Closure: Hot air device (HA) Tube Loading Station with Magazine, Tube Alignment, Presence Control Tube, Tube Centration, Filling Station, Hot Air Group, Tube Coding, Tube Cutting Station, tube output, Various format sets and spare parts

CONTROLS   PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE   external diameter min.: 8 mm   external diameter max.: 90 mm Round tube min. 8 mm            max. 90 mm Square tube min. 8x8 mm             max. 80x80 mm Rectangular tube min. 15x10 mm                  max. 60x85 mm

USED HYDRAULIC TUBE LNS 6/68 HS 4.4 Serial No.: 37456 Dimensions and weight 5000x800xH1500mm - weight 900 kg Auction-ID: A1-50950-39

USED HYDRAULIC TUBE LNS 6/65 HS 4.4 Serial No.: 31999 Dimensions and weight 5000x800xH1500mm - weight 900 kg Auction-ID: A1-50950-38

Batch of various stainless steel and aluminum plates and tubes Including frame and pallet Total weight: 455kg Auction-ID: A1-50936-173

ERCOLINA MB 42 / Mandrel tube bending machine -CE - Identifier -Year of construction 2009 -Bending capacity / steel tube 42.4x3mm -Max. tube diameter aluminum / copper 54x2mm -Bending performance furniture construction tube 48x1.5mm -Solid material up to 30mm -Max. bending angle 210 degrees -Electronic control with digital display -Max. 30 x program memory -Programs with 9 x bends - Overload Protection / Yes - Operation: Double foot pedal ( bend - return) -Max. bending speed 2rpm -Incl. 1x tool -1.1 KW -Footswitch -Documentation Dimensions: LxWxH 0.5x0.6x1.2 meters / Weight 100Kg

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

Lot of 30x Dockweiler stainless steel vacuum connections. Stainless steel 316 material Auction-ID: A1-50936-260

Batch of nickel-plated aluminum tubes, 74kg including pallet with edges Diameter: 9cm (inner 8cm) Auction-ID: A1-50936-172

Device for welding plastic tubes with a diameter of 63 to 160 mm consisting of: 1 weld tube positioning device 1 machine for machining the tubes before welding (to remove the oxidized film on the surface) machining of the 2 sides simultaneously 1 Teflon disc for heating tubes before welding.

Lot of 27x Swagelock stainless steel tube connector/fitting, T-split Auction-ID: A1-50936-90

Tube labeling machine Manufacturer: BBK Type: SR 160 Year of Make: 2006 Capacity max. 1,500 tubes/h Label width max. 160 mm 2 tube holder format sets: tube Ø 25 mm, tube length 90 mm, tube Ø 35, tube length 165 mm Allen Nxi Thermal Transfer Printing Unit Transfer conveyor to the tube filling and sealing machine Drive 400/50Hz Mobile Has worked in line with trailing tube filling and sealing machine 02-0769

Contents of section rack with PVC pipes, EPDM façade membrane, wall penetrations and various construction-related matters Auction-ID: A1-50663-1691

Small set: 250x18cm. Large set : 500x18 cm. Blue PVC pipes 500x22.5cm Auction-ID: A1-50892-108

In and including 1x plastic pallet box and 1x pallet with 2 edges Auction-ID: A1-50889-138

on about 10 yokes, and 5 boxes, in various sizes and designs Auction-ID: A1-50889-96

1 x Tube 6000mm 1 x Tube 4830mm 1 x Tube 5900mm Diameter approx. 250mm Auction-ID: A1-47396-1091

USED CORTINI T 120 C CNC LATHE Serial No.: T120019 Year: 1998 1 Main spindle with C-axis Bar diameter: 28 mm 1 8-station turret with rotating tools Equipped with 1 FANUC 21i-T CNC 1 Programmable tailstock 1 LNS HYDROBAR hydraulic tube Dimensions and weight Machine: : 2400x1400xH1600mm - weight 2500 kg - LNS tube: 4700x800xH1200mm - weight 450kg Auction-ID: A1-50950-10

USED HARDINGE CONQUEST 42 CNC lathe Bar diameter: 42 mm Diameter above the bed: 269 mm Diameter above the carriage: 180 mm Distance between tip: 350 mm 1 Main spindle with C axis Spindle speed: 50 to 5000 RPM Stroke: X 135 mm - Z 353 mm 1 Turret / 12 stations Equipped with 1 FANUC O-TC CN 1 Programmable counter point 1 Chip conveyor 1 LNS 6/42 hydraulic tubeMachine dimensions and weight : 3200x1500xH1600mm - weight 3200kg - LNS6/42: 4800x800xH1400mm - weight 700kg Auction-ID: A1-50950-23

USED CNC LATHE INDEX 170 M Serial No.: 24932 Spindle bore: 42 mm Max. diameter above the bed: 370 mm Distance between tips: 450 mm Longitudinal stroke of the carriage: 150 mm Stroke of the cross carriage: 400 mm Spindle speed: 4000 rpm Number of positions on the turret: 14 rotating tools Equipped with 1 FANUC series 21i-T CNC clamping on the main spindle1 Set of fixed and rotating tool holders 1 LNS HYDROBAR hydraulic tube Machine dimensions and weight : 3800x2200xH1800mm - weight4500kg - LNS tube: 4800x800xH1300mm - weight 500 kg Auction-ID: A1-50950-33

Inner workings pipe diameter: 750mm. Auction-ID: A1-42990-228

84 Layher Allround steel scaffolding floors – 1,500/1,000 × 320 mm – tube support Specifications: Brand: Layher System: All-round Type: steel scaffolding floor / scaffolding grid Quantity: 84 pieces 51 pieces with dimensions approx. 1,500 × 320 mm 33 pieces with dimensions approx. 1,000 × 320 mm Material: galvanized steel Execution: pipe bearing Features: Perforated non-slip walking surface Integrated support hooks at the ends Various original Layher manufacturer/identification labels Version for professional scaffolding construction Particularities: Bundled and stacked for transport Forklift available to load the lot PLEASE NOTE: this lot consists exclusively of the 84 pieces mentioned above: 51 pieces of approx. 1,500 × 320 mm and 33 pieces of approx. 1,000 × 320 mm. Other scaffolding parts, floors, grids, stacks, frames and other materials that ma ...

length up to 600 cm; cantilever rack in 2 sides; without shelf. This lot must be collected by the buyer himself. Auction-ID: A1-51062-167

tube: 4500 mm : 76,1 x 4,0 mm : 200 mm total power requirement: 3,5 kW machine weight ab.: 1.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lot 2205 – batch of various steel tubes/pipes Ø15–95 mm – approx. 4.0 m – 820 kg – incl. storage trestle Mixed batch of various steel tubes, pipes and round construction profiles in different diameters and designs. The batch consists of, among other things, galvanized and used/untreated steel pipes, largely with a length of approximately 4,000 mm. Including the steel storage/transport stand pictured. Specifications: Execution: mixed batch of steel tube/pipe material Specified diameters: approx. Ø15, Ø50, Ø75 and Ø95 mm Length: mostly approx. 4,000 mm Various deviating lengths available Total weight: 820 kg, weighed on site Material: steel Different wall thicknesses and designs Features: Various galvanized pipes /pipes Various used/untreated steel pipes Various round construction profiles Some parts equipped with connection/fastening parts Steel stor ...

Working lenght 4000 mm, capacity tube 40x2 mm, CNC 2 axis, extra tools Auction-ID: A1-51499-18

never used, capacity tube 1/2-2\" Auction-ID: A1-51499-52

Lot 2202 – 24x hot-dip galvanized steel construction tube Ø114.3 x approx. 5 mm – 8.95 m – approx. 2,880 kg – incl. storage trestle Specifications: Quantity: 24 pieces Profile: round steel construction tube Outer diameter: approx. Ø114.3–115 mm Wall thickness: approx. 5 mm Length per piece: approx. 8,950 mm Total length of pipe material: approx. 214.8 m Average weight: approx. 120 kg each Total weight of pipes according to specification: approx. 2,880 kg / 2.88 tons Material: Structural Steel Version: hot-dip galvanized Features: Various tubes with welded end/mounting plates Mounting plates with multiple bolt holes Heavy-walled industrial design Includes pictured steel storage/transport stand Particularities: Lot size: only the 24 described round steel construction tubes including the pictured storage/transport frame. Other visible beams, profiles ...

SICK S30B-3011BA Safety Laser Scanner Characteristics Sensor version without system connector Indoor application Protective field range 3 m Warning field range 8 m (at 15% remission) Distance measuring range 30 m Type of Field Theorem Triple Field Theorem Number of Field Sets 1 Number of fields 3 Number of monitoring cases 1 Scan angle 270° Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angular resolution 0.5° Response time 80 ms 1) Protective field surcharge 100 mm Number of multiple evaluations 2 ... 16, Configurable Automatic reset delay 2 s... 60 s, configurable Safety-related parameters Type Type 3 (IEC 61496) Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (Mean Probability of Hazardous Failure per Hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function  ...

SICK S30B-3011BA Safety Laser Scanner Characteristics Sensor version without system connector Indoor application Protective field range 3 m Warning field range 8 m (at 15% remission) Distance measuring range 30 m Type of Field Theorem Triple Field Theorem Number of Field Sets 1 Number of fields 3 Number of monitoring cases 1 Scan angle 270° Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angular resolution 0.5° Response time 80 ms 1) Protective field surcharge 100 mm Number of multiple evaluations 2 ... 16, Configurable Automatic reset delay 2 s... 60 s, configurable Safety-related parameters Type Type 3 (IEC 61496) Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (Mean Probability of Hazardous Failure per Hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function  ...

Laser marking laser marking system, Manufacturer GSI Lumonics Type XYMark, consisting of laser and suction. Geraet untested More information on request Special price

Includes jet attenuator. Auction-ID: A1-50707-135

Control: Max.travel range: X 800 mm Y 850 mm Z 500 mm Wave length:1,06 um Average power:100 Watt Max. peak pulse power:9 kW Laser crystal:Nd:YAG Made in Germany

MANTIS TRISOM Good working condition and cosmetics The Mantis TRISOM is a medical laser for permanent and progressive hair removal, designed to effectively treat all phototypes, including tanned skin, thanks to its multi-wavelength technology. It simultaneously combines three wavelengths – Alexandrite (760 nm), Diode (808 nm) and Nd:YAG (1064 nm) – to act at different levels of depth on the structure of the hair, from the bulge area to the papilla. Its liquid optical fiber optimizes the penetration and distribution of energy, ensuring a precise and homogeneous treatment, while respecting the surrounding tissues. Its Fibra Cool HP cooling system guarantees maximum comfort, even in sensitive areas. PERFECT CONDITION GOOD CONDITION GOOD WORKING Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must b ...

Control: FOBA Max.travel range: X mm Y mm Z mm Wave length: um Average power: 150Watt Max. peak pulse power: 200 kW Laser crystal:Nd:YAG machine has cooling equipment, Made in Germany