tube in tube used for sale

Manufacturer: Mimaki Model: CJV150-75 Year of Manufacture: 2022 - Counters: not available - RIP software included: RasterLink 6 - Ink origin: the machine has always been used with genuine Mimaki inks - Last maintenance: 2024 - The print head needs to be replaced Find more here - .ucymachines/ Contact us at - sales@ucymachines

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

Internal grinding machine WMW SI4 A

Sell an ENIDINE Heavy Duty Industrial Shock Absorber, Type HD 2.0x28 FMP, P/N FMP34530-R. Unused stock in wooden box. Condition visually good, precise technical inspection not carried out. Ideal for mechanical engineering / industrial equipment / spare parts needs.

A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect.

Net weight= 415 kg,

Ribbon insterting machine For automatic inserting of one or two ribbons into cutted, straight, rounded and pressed book blocks. Can be used in connection with a casing-in line. Description : Infeed conveyor Bookmark insert Scissor Delivery Formats 350x240x70 mm - 100x65x3 mm or 100x100x3 mm Ribbon width : 3-8 or 6-13 mm Capacity for 1-2 ribbons : 60 cycles/min (depending on the format)

240V, 50HZ, 0.75KW, 2.8A, 1420RPM FACTORY F40

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

PLC control, digital output, digital input, digital input module -Manufacturer: Siemens, SIMATIC S7, Digital Input Module with Base Unit -Type: 6ES7 131-6BF01-0BA0 6ES7131-6BF01-0BA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0DA0 -Number: 3 modules available -Price: per piece -Dimensions: 118/18/H74 mm -Weight: 0.1 kg/pc.

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -10°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37°C and -10°C

For direct integration into production lines - Materials: Stainless Steel – Aluminum - Height and depth adjustable - Height adjustment range: 900–1400 mm - Depth adjustment range: up to 300 mm - For inkjet heads - Equipped with one photocell per bracket - Total height: 1800 mm - Robust design - In very good condition

Silo system with 4 containers HB-TECHNIK - Capacity of a total of 16 tons of flour - 4 aluminium silos - Incl. scale and dosing unit - Condition: Good, ready to use - already dismantled - Transport costs and assembly on request

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 2019 Tested at 37°C and -2°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

UVP HL-2000 Hybridization Incubator Temperature range: From ambient temperature +10°C to 99.9°C Hybridization furnace Model: HL-2000 HybriLinker 2 independent devices in 1 Membrane fixation by 254nm UV irradiation and hybridization Stainless steel interior Door with glass window protecting from ß emissions For long tubes. 300mm max The rotating wheel can hold up to twenty 35 x 150 mm bottles and ten 35 x 300 mm bottles at a time Membrane drawer with UV-resistant viewing window In excellent condition Tested at 37°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the rear wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2008 Tested at 37°C and -10°C Slightly deformed sheet metal at the front

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 2003 Tested at 37°C and -2°C

STUART SI505 Incubator Shaker for Microplates Orbital agitation amplitude 1.5 mm Stirring speed: 250 to 1250 rpm for 4 microplates or 2 microtube holders Temperature range (°C): ambient +7°C to 60°C Temperature Resolution (°C): 0.1°C Timer: min/sec, hour/min, day/hour Speed control: digital regulation in 10 rpm increments. Platform dimensions (mm): 220 x 220 Internal dimensions L x W x H (mm): 307 x 300 x 190 External dimensions L x W x H (mm): 361 x 405 x 430 Heating power (W): 200 Power supply (V / Hz / W): 230 / 50 / 300 IP rating: 31 Weight (kg) : 22.5 In excellent working condition

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 1999 Tested at 37°C and -2°C

ABB DCT880-W03-0160-04XA DC Drive 160A 110kW Inverter DCT880 DCT880-W03-0160-04 Item Condition: New (Other) The item is new, but may show traces of storage. Technical data: Type: DCT880-W03-0160-04 (3-leg, 3-phase) Rated current: 160 A Input voltage: 110-400 V AC, 3-phase Power: approx. 110 kW (at 400 V) Weight: ~16 kg Dimensions: approx. 370 × 271 × 270 mm Note: For detailed technical data and processing instructions, we strongly recommend that you consult the original data sheets or information directly from the manufacturer More items - new and used - can be found in our shop! International shipping costs on request! PD16

Key data: 1000 kN

ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine no. 8 Clamping force: 1000 kN EUROMAP: 1000-675. Operating hours in automatic mode: 32,312 h. Machine cycles: 3,192,800. Hydraulic pump operating hours: 42,753 h. Screw diameter: 55 mm. Distance between columns: 470 x 470 mm. Platens: 637 x 637 mm. Maximum mold height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Injection volume: 675 cm³. Operating voltage: 400 V – 3 – 50 Hz. Heating: 14.9 kW. P ump motor: 1 x 22.00 kW. Total installed power: 50 kW. Dimensions: 4180 x 1645 x 2140 mm (height). Weight: 5400 kg.

Key data: 500 kN

ARBURG ALLROUNDER CENTEX 320 C 500 – 250 (Year 2002) Serial number: 188161 – Machine no. 30 Clamping force: 500 kN EUROMAP: 500-250. Operating hours in automatic mode: 38,560 h. Hydraulic pump operating hours: 48,759 h. Cycles: 6,502,482. Spindle diameter: 40 mm. Distance between columns: 320 x 320 mm. Platen dimensions: 446 x 446 mm. Injection unit (EUROMAP): 250. Approximate injection volume: 106 m³. Injection weight (PS): 97 g. Operating voltage: 400 V – 3 – 50 Hz. Heating: 6.5 kW. Pump motor: 1 x 15.00 kW. Total power: 21.5 kW. Weight: 2,330 kg.

ALLROUNDER SELECTA 470 S 1000 injection molding machine. (2001) Registration: 187133 – Machine 9. Clamping force: 1000 kN. EUROMAP 1000-675. Operating hours in automatic mode: 32,311 h. Cycles: 3,192,790. Hydraulic pump operating hours: 41,853 h. Injection unit: 675. Screw diameter: 55 mm. Distance between columns: 470 x 470 mm. Platens: 637 x 637 mm. Maximum mold height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Injection volume: 675 cm³. Operating voltage: 400 V – 3 – 50 Hz. Heating: 14.9 kW. Pump motor: 1 x 22.00 kW. Total installed power: 50 kW. Dimensions: 4180 x 1645 x h. 2140 mm. Weight: 5400 kg.

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

1.370 litre, Stock number: T3966, Litre: 1370, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, electrically heated, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 410 mm, Turbolence plate: Yes, 1 pc., Agitator: Yes, 2 pcs., Agitator type: Propeller and anchor agitator with scrape, Agitator placement: From the top, Motor Propeller: Variable speed; 5 kW - 380 Volt - 150/760 rpm., Motor Anchor agitator: Variable speed; 6,8 kW - 230/400 Volt - 0/40 rpm., Working temperature: 0-100° C, Working pressure tank: -1/+1 Bar, Inner diameter: Ø 1250 mm, Outer diameter: D 1470 mm, Total height: H 2650 mm

PUREGEN PGA 3672 SIMPLEX SYSTEM MAKE : PUREGEN GROUP OPERATION : AUTO BACKWASH SYSTEM DIMENSIONS : 36" Ø x 72" H FLOW RATE : ≈ 25 m3/hr MAX OPERATING PRESSURE : 150 PSI MATERIAL : STAINLESS STEEL SS304 WATER QUALITY : UP TO 10 MICRONS C/W JKKP DESIGN APPROVAL EACH FILTER C/W SUPER MICROSITE FILTRATION MEDIA WHICH CONSISTS OF 6 LAYERS OF ADVANCE DESIGNED MEDIA : ACTIVATED CARBON GREEN SAND SILICA SAND FINE SAND COARSE SAND QUARTZ STONE PLEASE CONTACT AARON: 0173698203 (MALAYSIA NUMBER) Located at Factory 04

MEMMERT BE 800 incubator / oven with natural convection 70°C Capacity: 749 liters Temperature range: ambient temperature +5 °C to +70 °C Interior glass door Built-in digital temperature display 4 stainless steel shelves On wheels Power supply: 230 V Frequency: 50-60 Hz Power: 2000 W External dimensions (W) x D x (H): 119 x 75 x 161.5 cm Internal dimensions (W) x D x H: 103.5 x 60 x 120cm Tested at 37°C (36.2°C reading) and 50°C (48.2°C reading) Very stable indoor temperature, only a slight difference between the required temperature and the actual temperature

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Model: M-10iA/6L Serial Number: R11Y01899 Year of manufacture: 2011 Load capacity: 6 kg Reach: 1630 mm Number of axles: 6 Weight: 135 kg

Including add-on tenderiser of 104 knives, Belt width: 260 mm, Needles: 21 pcs. of 4 mm, Product height: max 210 mm, Speed: 72 RPM, Power: 3 x 400V, 50Hz, 2.3kW, Dimensions: 1500 x 700 x 1800 mm, Weight: 210 kg

Year of manufacture: 2020 Serial Number: 10023754 Load capacity: 360 kg Reach: 2830 mm Control: KRC4

KUKA KR60 L30-3 industrial robot Year of manufacture: 2017 Load capacity: 30 kg Reach: 2429 mm Control: KUKA KRC4 2 pcs available.

KUKA grinding cell with KR 180 robot Set Year of manufacture: 2011 Reach: 2498 mm Controls: Kuka KRC4 Load capacity: 180 kg We have 4 goals Remote control

Year of manufacture: 2012 Control: KUKA KRC4 Lifting capacity: 240kg Reach: 2896mm

Model: KR 210 R2700 prime Serial Number: 642212 Year of manufacture: 2015 Payload: 210 kg Reach: 2696 mm Weight: 1111 kg

This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details.

Country of manufacture: Germany Year of manufacture: 2015 Reach: 1801 mm Repeatability: +/- 0.5mm Number of axles: 6 Load capacity: 16 kg Control: KPC4 Weight: 245 kg

This Husky HL225 RS65 was manufactured in 2011. It features a clamping force of 225 tons and a screw diameter of 60 mm, optimized for high-speed PET preform production. The machine includes a platen size of 750 x 750 mm and an opening stroke of 500 – 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky HL225 RS65 electrical injection moulding machine we have for sale. Contact us for further details.

Model: KR 270 R2700 Ultra Version: C4 FLR (Floor) Year of manufacture: 2017 Load capacity: 270 kg Reach: 2696 mm Weight: 1129 kg Controller: KUKA KR C4 Serial Number: 663438

This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.

This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system offers an optional REMAK RE-CNC 6-axis robot with a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

Hygienic robot, suitable for food and medical industry. Pick and Place Robot Model: KUKA 3 D1200 HM/SEL Number of available: 24 robots Year: 2021 Load capacity: 3 kg Reach: 1200 mm Control: KR C5 KSP

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.

Year of construction: 2012 Load capacity: 6 kg Reach: 901 mm

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

Year of manufacture: 2001 Control: (V)KRC2 Load capacity: 15kg Reach: 3085 mm