135,938 used machines on RESALE, but how to find them? Machine Search
Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg
Ex Center screw pump stainless steel Manufacturer: CSF inox Stator: Diameter 120 mm Statorlänge: 240 mm Transmission: Motovario No.: 88232123 Type: MKM/4 / 50 40-210 min-1 Engine: ABB motors LKeistung: 4 kW 1000 kg / h Dimensions: LWH = 1800 x 400 x 500 mm Weight: 300 kg good condition
Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good
Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg
Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg
PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Ex Center screw pump stainless steel Manufacturer: CSF inox Getirebe: Lenze Germany Type: 11.331.31.25.4 / 8829 N1-n2 = 107-556 min-1 No: 8/1206/519 Engine type: 180 M / 4 K2465 380 V, 50 Hz Power: 18.5 kW 1460 RPM Stator diameter: 170 mm Stator length: 790 mm Dimensions: LWH = 2900 x 460 x 1000 mm Weight: 600 kg
2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 SX02 A furnace for 20 sheets Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler system with magnetic pump including. 4 piece rack new Sales including freight and installation upon request I also have to sale 2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 (7 Edition, high shelves)
Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.
used
GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.
Technical data capacitor volume flow Max: 300 m³/h Capacitor size max in the delivery State: CA. 430 mm x 1610 mm high cylindrical part: approx. Ø 273 mm weight of the Chamber in the delivery State: approx. 80 kg Contents upper part (capacitor): approx. 30 L Content bottom (template container) approx. 28 L Materials elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 ° to 80 ° C condenser vacuum max: 0 to 1000 mbar (absolute) (Suitable capacitor for overpressure!) Tauscher max temperature: 1 ° to 80 ° Equipment heat exchangers: Water Tauscher max water pressure: 10 bar Tauscher material: CU tinned Material capacitor: stainless steel Technical questions or other sizes on request.; ready for operation
Cardridge filter single, 1 x with TI Max. Operating pressure: 10 bar Max. Operating temperature:-25 / + 150 ° C Content: 9.3 L Price/piece Negotiable
DAUB oven THERMO-ROLL type RDTO SX02 Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. incl. daub thermal oil boiler system with magnetic pump Sales including freight and installation upon request I also have to sell other model thermooel oven Price on request, Please give as oven you need type.
DATA ON THE MACHINE Machine type: Permanent magnet - DC servo motor Manufacturer: INDRAMAT Model: MDC 10.40C / MMA-0 / S06 Condition: ready for use (used) Price 550 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MAH-1119-9 Description We offer you a used DC servo motor from the manufacturer Indramat suitable for e.g. MAHO MH700 X or Y axis Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!
Cyclone / hydro-cyclone Type: 10 INCH C-650 / C650 New from surplus/stock For more information, see pictures!
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
lot of 6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 A furnace for 20 sheets Usable area of 10 m² or 12 m² 6 oven total total area 60 m² or 72 m² - 120Bleche Oven is in very excellent condition, General and thorough overhauled and tested. Works like new. Very good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler plant including. 40 piece rack Sales including freight and installation Price on request
The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro. ...
Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 10 amp-25 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.
Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 3 amp and 10 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.
Producer: INOTEC Type: WT97-RNSV Power: 2,5 kW Weight: approx. 400 kg Length x width x height: 998 x 850 x 1740 mm Sausage cutter INOTEC type WT 97 - RNSV , directly from the customer, without table - Caliber from 17 to 46 mm - Adjustable speed of 0.25 m/s up to 0.8 m/s Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
New injection pump 0402 066 725(=PES6P110A120RS3336-1) NET 2.950,-EURO 6 x new injectors 0432 191 342 (Cummins # 408931500) net / piece 215,-EURO Mail: info@miw-zeven
Injectors new 6 x 0432 191 342/408931500 NET / piece 215,-EURO Injection pump new 0402 066 725/PES6P110A120RS3336-1 NET 2.950,-EURO mail:info@miw-zeven
Screen basket screw used Manufacturer: TSO Industrieanlagen Type: D 400 Year of construction: 2002 Screw diameter: approx. 400 mm Slope approx. 250 mm Thickness approx. 6 mm Screening container each: approx. 2400 x 1100 x 1100 mm Geared motor 4 kW 30 rpm Total dimensions: approx. 6000 x 1100 x 1700 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sale reserved.
Lacquered inclined supports 1,60-3,00m á 34,50€/pc. net Inclined supports new , painted 1,60m - 3,00m = 34,50€/ piece Inclined supports new, painted 2,10m - 3,50m. = 35,50€/ piece Inclined supports new, painted 2,30m - 4,10m. = 38,50€/ piece Inclined supports new, galvanized 1,60m - 3,00m = 38,90€/ piece Inclined supports new, galvanized 2,10m - 3,50m = 40,90€/ piece Inclined supports new, galvanized 2,30m - 4,10m = 42,90€/piece Frame for construction supports new, lacquered 70,00€ European Community product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NO.: DE279047055 Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943
1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...
Inject Star ES-1100 Vacuum Tumbler-Ref.8491D Brand: Inject Star Model: ES1100 Manufacture year: 2005 Volts (v): 3 220 / 380 V / 50 Hz Power : 2,2 kW Width: 1540 mm Height: 1800 mm Length: 2150 mm Weight: 750 Kg This machine is designed for massaging meat with and without bones, using a special baffle. The product is moved across the special baffle to provide efficient protein activation, and massaging in a rotating, sliding, and slipping movement. Drum volume: 1100 l Optimal loading: 500-700 kg Drum rotating speed: 1-11 turnovers per minute The system is driven by a frequency controlled motor via friction rollers. The container is emptied by rotating it to the left. Equipped with computer. Up to 99 production programs can be created and stored. The programmable parameters are: massaging speed, massaging duration, direction of rotation, processing time, ...
CATALOG NO. 6901 TECHNICAL DATA - max turning length 1200mm - max turning diameter 210mm - max turning diameter with a standard 90mm steady rest - max dimension of square material for turning with automatic feeding 100mm - 3 hydraulic copiers - additional 3 knives on hydraulic pistons (2 pcs) - 4 types of spindle rotation - automatic or manual operation of the machine - headstock spindle motor 9kW - 3kW hydraulic pump motor - diameter of the exhaust connection 90mm - dimensions for transport length/width/height 3700x2100x2000mm - weight about 3000 kg ADVANTAGES – Italian production – automatic hydraulic copier – original DTR documentation – unpainted – used lathe, very good condition Net price: PLN 69900 Net price: 15032EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may cha ...
maximum number of results exceeded
please refine your search
