127,554 used machines on RESALE, but how to find them? Machine Search
Number of spindles: 3 St. Number of tools: 2/3 St. Spindle diameter: 40/50 mm 1 OKOMA folding machine model UF 2 EG ------------------------------------- 1. Energy data: - Operating voltage: 3 phases, 380 V, 50 Hz. - Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 6611 2. Profile spindle 1: - Spindle arrangement: right - Power 11 kW - Speed 7000 rpm - Direction of rotation: synchronous and counter rotation - Spindle diameter 40 mm - Usable length 252 mm - Tool diameter max. 230 mm - U-movement of the profile spindle - Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch - Automatic immersion: immersion speed can be regulated for tear-free Fold over - Pro ...
Empty bottle inspector, make Heuft, type: Spectrum TX (HBBIRTI24), built 2006
Key data: 4200 kN
Machine in production !1
with 5 Bitzer compressors Make: BITZER Type: 6G-30.2Y-40P Displacement: 153.1 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
MITSUBISHI RV-70FM-D1-S15 robot was built in 2020 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine has worked a small number of hours and has not been used in production. The MITSUBISHI RV-70FM-D1-S15 is a state-of-the-art industrial robot designed to automate production processes in an industrial environment. With a payload of 70 kg and an arm reach of 2050 mm, it enables efficient operation in CNC machine handling, palletising, assembly and workpiece loading and unloading. All of the 6 axes are equipped with AC servo motors with brakes. This solution, combined with a position detection system based on absolute encoders, ensures high movement dynamics, precision and stable operation even during intensive use. The MITSUBISHI RV-70 robot arm cooperates with the CR760-70VD1-1-S15 controller, which is responsible for precise motion control and enables the expansion of the syst ...
Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Height: 250
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chucks -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/65/H55 mm -Total weight: 2.2 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H65 mm -Total weight: 3.7 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 70/90/H57 mm -Total weight: 1.7 kg
with 3 Bitzer compressors Make: BITZER Type: 6H-25.2Y Displacement: 133.3 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
T14 - used approx. 22 m³ / 22,000 L steel tank, repainted inside and out, with heating coil, lying on steel bases. Technical details: Content: approx. 22 m³ / 22,000 litres Material: Steel tank with inner coating Dimensions: approx. Ø 2.30 m × L 5.30 m / H total 2.70 m Other: Used steel tank, repainted inside and out, with heating coil. In good condition. Horizontal, above-ground storage tank on 2 steel bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., or e.g. as a firefighting water tank. Price on request. Transport can be organised at a reasonable price. It is ...
Composite system with 1 Bitzer compressor Make: BITZER Type: 4G-20.2-40P Displacement: 102.1 m³/h with 1 Bitzer compressor Make: BITZER Type: 4GE-23Y-40P Displacement: 102 m³/h and with 1 Green Point compressor Make: Green Point Type: 4G-20.2Y-40P Displacement: 101 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg
Aseptic Tetra Pak Filling Line – A3/Flex 150V (250 ml Prisma) High-quality aseptic carton filling line designed for efficient packaging of liquid food products in 250 ml Prisma cartons. The line is equipped with reliable Tetra Pak equipment and features low operating hours, making it an excellent solution for beverage and dairy producers seeking dependable aseptic packaging capacity. Line Configuration - The filling line consists of the following equipment: - Tetra Pak Filling Machine – A3/Flex 150V - Tetra Pak Accumulator – ACHX 10/35N - Tetra Pak Straw Applicator – TSA21 - Tetra Pak Film Wrapper – TFW67 - Tetra Pak Filling Machine - Core aseptic filling unit for 250 ml Prisma cartons. Technical Specifications - Manufacturer: Tetra Pak - Model: A3/Flex 150V - Year of Manufacture: 2008 - Package Volume: 250 ml - Package Format: Prisma - Capacity: 9,000 pac ...
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/80/H67 mm -Total weight: 2.3 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 3.7 kg
horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater or above ground with brackets, e.g. for molasses, AHL, ASL, water, corn mixture Volume: 32,000 L Dimensions: Ø 2.50 × 7.0 m long
4 x valve block with interface module EX250-SDN1 and with 20 x solenoid valve SV2100R-5FU
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/105/H65 mm -Total weight: 4.0 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg
Used Tetra Pak A3 Flex 250 ml Prisma Filling Line Complete aseptic carton filling line for packaging liquid food products in 250 ml Prisma cartons, with quick conversion capability to 200 ml. This line includes essential Tetra Pak equipment for filling, accumulation, straw application, and secondary packaging, making it a reliable solution for beverage and dairy production. Line Configuration - The filling line consists of the following equipment: - Used Tetra Pak Filling Machine – A3 Flex - Used Tetra Pak Accumulator – ACHX 10/35N - Used Tetra Pak Straw Applicator – TSA21 - Used Tetra Pak Film Wrapper – Film Wrapper 67 Tetra Pak Filling Machine General Information - Manufacturer: Tetra Pak - Model: A3 Flex - Development Stage: V150 - Year of Manufacture: 2008 - Package Format: Prisma Technical Specifications - Capacity: 9,000 packs per hour - Package Vol ...
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg
Used Tetra Pak A3/CompactFlex 200/250 ml Edge Filling Line Complete aseptic carton filling line designed for packaging liquid food products in 200 ml and 250 ml Edge cartons. The line includes Tetra Pak equipment for filling, accumulation, capping, and secondary packaging, offering a reliable solution for medium-capacity beverage and dairy production. Line Configuration - The filling line consists of the following equipment: - Used Tetra Pak Filling Machine – A3/CompactFlex - Used Tetra Pak Accumulator – ACHX 10 - Used Tetra Pak Cap Applicator – Cap 30 Flex (HeliCap 23) - Used Tetra Pak Cardboard Packer – TCBP 32 - Conveyor System (to be designed according to factory layout) Tetra Pak Filling Machine - General Information - Manufacturer: Tetra Pak - Model: A3/CompactFlex - Year of Manufacture: 2010 - Package Format: Edge - Technical Specifications - Cap ...
Used Tetra Pak A3/Flex 1000 ml Edge Filling Line Complete aseptic carton filling line designed for packaging liquid food products in 1000 ml Edge cartons. The line includes Tetra Pak equipment for filling, capping, and secondary packaging, providing a reliable solution for dairy and beverage producers. Line Configuration - The filling line consists of the following equipment: - Used Tetra Pak Filling Machine – A3/Flex DIMC - Used Tetra Pak Cap Applicator – Cap 20 (Trepak made for Tetra Pak) - Used Tetra Pak Cardboard Packer – TCBP 70 - Conveyor System (to be designed according to factory layout) Tetra Pak Filling Machine General Information - Manufacturer: Tetra Pak - Model: A3/Flex DIMC - Year of Manufacture: 2006 - Package Format: Edge Technical Specifications - Capacity: 7,000 packs per hour - Package Volume: 1000 ml - Working Hours: approx. 50,000 h ...
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/85/H60 mm -Total weight: 2.9 kg
Used Tetra Pak A3 Compact Flex 125 ml Slim Filling Machine Reliable aseptic carton filling solution designed for packaging liquid food products in 125 ml Slim cartons. The system includes the Tetra Pak A3 Flex filling machine, together with accumulation and straw distribution equipment, providing an efficient setup for beverage and dairy production. Line Configuration - The equipment package consists of the following machines: - Used Tetra Pak Filling Machine – A3 Flex - Used Tetra Pak Battery (Accumulator) – ACHX10 - Used Tetra Pak Straw Distributor – SA30 Tetra Pak Filling Machine General Information - Manufacturer: Tetra Pak - Model: A3 Flex - Year of Manufacture: 2008 - Package Format: 125 Slim Technical Specifications - Capacity: 9,000 packs per hour - Operating Hours: approx. 20,000 h Tetra Pak Battery (Accumulator) - Buffering system designed to ...
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 100/65/H55 mm -Total weight: 1.7 kg
Used Tetra Pak TBA 19 / 200 ml Slim Filling Machine Reliable Tetra Pak carton filling solution designed for packaging liquid food products in 200 ml Slim cartons. The system includes the TBA 19 filling machine, together with straw application and carton packing equipment, providing an efficient solution for beverage and dairy production. Line Configuration - The equipment package consists of the following machines: - Used Tetra Pak Filling Machine – TBA 19 - Used Tetra Pak Straw Applicator – TSA21 - Used Tetra Pak Carton Packer – TCBP 70 Tetra Pak Filling Machine General Information - Manufacturer: Tetra Pak - Model: TBA 19 - Package Format: Slim Technical Specifications - Capacity: 7,500 packs per hour - Package Volume: 200 ml - Working Hours: 34,772 h Tetra Pak Straw Applicator - Automated unit for applying drinking straws to carton packages. - Manuf ...
Industrial Screwdriver Fein AS sd 715-1 Data Industrial Screwdriver - Stick Wrench ASsd 715-1 Fein Elektronik ASsd 715-1 With transformer 42 volts / 40 watts, 1.0 A, 1000 rpm, Right/Counterclockwise Rotation (only screws on pressure)
Injector nozzle complete, overhauled, ready for installation Mitsubishi No.: 37560-29000
Dosing machine AG 8 DPE 250 built in 2012 with hot double jacket on the storage tank and accessories (filling heads and screw conveyor)
Description: For sale is an ABB IRB 6640 M2004 industrial robot including control cabinet system. The robot comes from an industrial environment and is expressly sold as a spare parts carrier or untested. A functional test was not carried out. The scope of delivery includes the complete robot arm and the associated ABB controller. In addition, there is another, identical control cabinet. The robot is ideal as: Spare parts dispenser Project basis for repair Conversion or retrofit projects Training or test systems (after refurbishment) Technical data (as far as known / typical IRB 6640 M2004) Manufacturer: ABB Model No.: IRB 6640 M2004 Axles: 6 Control: ABB IRC5 (M2004) Type: Floor Mounting Robot Class: Heavy-Duty Industrial Robots (exact payload and reach variant not finally confirmed) Condition: ❌ Not tested ❌ No functional test carried out ⚙️ ...
Key data: 6500 mm, 2013 , 80
Screw diameter: 80 mm Injection weight in polystyrene: 2013 g Clamping force: 6500 kN Screw diameter: 80 mm Stroke volume: 2212 cm³ Injection weight in polystyrene: 2013 g/hp Injection pressure: 2,090 bar Clamping force: 650 t Lights Tie-bar spacing H x V: 1040 x 910 mm Tool installation height - min.: 400 mm Opening distance: 500/1350 mm Microprocessor control: KEBA 2985- 15' tou screen Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / Without water battery: -/- Pump drive power: 65 kW Total connected load: 84 kW Total weight: 28,000 kg Total size: 7.7 x 2.6 x 2.7 m Payment terms: 100 % before taking over the machine, net only
Immediately available completely overhauled injection pump
This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums -Manufacturer: Allaway, industrial vacuum cleaner, central vacuum cleaner without motor -Type: Manta APC 3 -Dimensions: 600/550/H1970 mm -Weight: 86 kg
Roboter ABB Robotics IRB 7600-325/3.1 M2004 Rob. No. 76-63643 The 7600 is part of ABB's heaviest line of high-performance industrial robots. This device was built in 2010. The IRB 7600 is ideal for heavyweight applications, regardless of the industry. Typical areas can include handling heavy fixtures, turning bodies, lifting engines, handling heavy parts in foundries or forges, loading and unloading machine cells, and handling large and heavy pallet layers. This robot comes with the IRC5 M2004 controller (fifth generation of the ABB control system), which offers: Robot Applications Heavy-duty handling: Moving heavy fixtures or components Automotive industry: relocation of body-in-white, lifting of engines Foundries & Forgings: Transporting Materials in Harsh Environments Palletizing: Handling large, heavy pallet layers General Specification Maximum load of the robot ...
Roboter ABB Robotics IRB 7600-500/2.55 M2004 Rob. Item no. 7600-103651 The 7600 is part of ABB's heaviest line of high-performance industrial robots. Payload 400 kg for 2550 mm extension. The IRB 7600 is ideal for heavyweight applications, regardless of the industry. Typical areas can include handling heavy fixtures, turning bodies, lifting engines, handling heavy parts in foundries or forges, loading and unloading machine cells, and handling large and heavy pallet layers. This robot comes with the IRC5 M2004 controller (fifth generation of the ABB control system), which offers: FlexPendant The FlexPendant features a clear, full-color touchscreen-based design and a 3D joystick for intuitive interaction. Powerful support for customized applications allows you to load RAPID programming language RAPID programming offers the perfect combination of simplicity, flexibility and ...
Roboter ABB Robotics IRB 7600-500/2.55 M2004 Rob. No. 76-63756 The 7600 is part of ABB's most powerful range of heavy-duty industrial robots. Payload 500 kg at 2550 mm radius. The IRB 7600 is ideal for demanding applications in all industries. Typical areas of application are the handling of heavy fixtures, the turning of car bodies, the lifting of engines, the handling of heavy parts in foundries or forges, the loading and unloading of machine cells and the handling of large and heavy pallet layers. This robot is equipped with the IRC5 M2004 controller (fifth generation of the ABB control system), which has the following features: FlexPendant The FlexPendant features a clear, full-color touchscreen design and a 3D joystick for intuitive operation. Powerful, customizable application support allows you to load RAPID programming language RAPID Programming offers the perfec ...
T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...
Incl. control and control panel Axles: 6 Hand load capacity 16 kg
Bosch Injection Pump for MAN D2842 LE211 with GAC controller, cf. MAN part number: 51.11103-7451 59.11103-7451 N (l/min): 750 RW (mm): 12.7 or 13.6 EPP-FM (mm³/H): 332 or 367
Roboter ABB Robotics IRB 7600-325/3.1 M2004 Rob. No. 76-63695 (20960 operating hours) The 7600 is one of ABB's heaviest industrial robots. This device was built in 2010. The IRB 7600 is ideal for heavyweight applications, regardless of the industry. Typical areas include handling heavy fixtures, turning bodies, lifting engines, handling heavy parts in foundries or forges, loading and unloading machine cells, and handling large and heavy pallet layers. This robot comes with the IRC5 M2004 controller (fifth generation of the ABB control system), which has the following features: FlexPendant The FlexPendant features a clear, full-color touchscreen-based design and a 3D joystick for intuitive interaction. Powerful bespoke application support enables loading of RAPID programming language RAPID programming offers the perfect combination of simplicity, flexibility and performance. ...
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 3 m² Weight approx.: 2.500 kg There is also an identical system as a spare parts dispenser as an option for an extra charge. The control panel is missing here. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 300 x 300 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals) - Pump output: 7.5 kW, 14.9 A - Total output: 28 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Weight approx.: 2,250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
10 € 
