tube in tube used for sale

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2700 mm

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Incubator/incubator Manufacturer: Binder Nominal temperature up to 100 °C

Consisting of: 2x driverless truck model MIR 500, capacity each 500 kg, payload footprint 1300x1100mm, rated speed 2 m/s, max slope 5%, nominal power 2x400W, 2x wall mounted charging stations, 60 steel pallet drop-off fixtures (floor mounted)and 5-station conveyor system lenght approximately 12.000mm Auction-ID: A1-48377-12

Extraction and filter system with cleaning module. System appears unused; integrated fire extinguishing/safety device specified. Main system: 400 V, 50/60 Hz, 1.5 kW, 4.0 A, IP42; Additional module: 230 V, 0.08 kW. Auction-ID: A7-49816-102

3 pieces locker cabinet with opening The offer refers exclusively to the post cabinets. Dimensions: 420x450x1960 mm Auction-ID: A7-49816-151

3 pieces locker cabinet with opening The offer refers exclusively to the post cabinets. Dimensions: 420x450x1960 mm Auction-ID: A7-49816-152

WEISS rotary switching unit / rotary indexing table with control from an automated assembly system. Condition: used Technical data: Manufacturer: WEISS GmbH Type: TC0320T Serial number: TC514801 Station: 04 Year of construction: 2019 Weight: 112 kg Drive / control: Siemens SIMOTION D Siemens SINAMICS PM240-2 Dimensions approx.: 45 × 82 × 40 cm Auction-ID: A7-49816-61

WEISS rotary switching unit / rotary indexing table with control from an automated assembly system. Condition: used Technical data: Manufacturer: WEISS GmbH Type: TC0320T Serial number: TC514801 Station: 04 Year of construction: 2019 Weight: 112 kg Drive / control: Siemens SIMOTION D Siemens SINAMICS PM240-2 Dimensions approx.: 45 × 82 × 40 cm Auction-ID: A7-49816-60

Roll size approx. 6m2. Approx. 8 cm thick. 1 roll already opened. Auction-ID: A1-49846-287

Delivery as shown Not all keys available Total dimensions: 620x450x1960 mm Auction-ID: A7-49816-150

Assortment of cutting plates, unused, mainly manufacturers Sandvik and Walter, different sizes and designs, see photos for more details Auction-ID: A7-49942-1090

Assortment of inserts, a total of approx. 53 pieces, mainly make: WODEX, different sizes and designs, mainly type: K25/ P25, see photos for more details Auction-ID: A7-49942-1091

Note: This listing is for the Storage Tent 30 x 85 x 15 ft (approx. 9.15 x 26.00 x 4.50 m), model 308515R . In a separate auction, another storage tent measuring 30 x 65 x 15 ft will also be offered. Please note that these are two different sizes and separate auctions. Robust storage tent in industrial design with galvanized steel construction and durable PE tarpaulin. Ideal as a warehouse, machine shelter, vehicle shelter or construction site warehouse. The kit is in its original packaging in the transport rack. ✔ Highlights ✅ Model 306515R ✅ Dimensions: approx. 9.15 x 26.00 x 4.50 m (30 x 85 x 15 ft) ✅ Robust round arch steel construction ✅ Galvanized steel pipes for high corrosion resistance ✅ Durable 300 g/m² PE fabric tarpaulin ✅ Large driveway with roller door ✅ Ideal for agriculture, commerce, industry and construction sites ✅ Supplied a ...

There are a total of two identical devices for sale this is device no. 2 of 2 Manufacturer: Systèmes-Attum (France) Model: CS17 Industrial touch screen PC/HMI control panel ATEX certified for hazardous areas Certification: II 3 G Ex nA [ic] IIB T4 Gc Certificate: DEKRA 15 ATEX 0052X Intel Celeron J1900 processor, 1.99 GHz 4 GB RAM 120 GB memory Wi-Fi integrated Passive cooling USB, COM and network ports available Robust industrial housing Made in France Used condition with usual signs of wear Auction-ID: A1-49581-80311

THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-253

THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-278

Note: This listing is for the storage tent 30 x 65 x 15 ft (approx. 9.15 x 20.00 x 4.50 m), model 306515R . In a separate auction, another storage tent measuring 30 x 85 x 15 ft will also be offered. Please note that these are two different sizes and separate auctions. Robust storage tent in industrial design with galvanized steel construction and durable PE tarpaulin. Ideal as a warehouse, machine shelter, vehicle shelter or construction site warehouse. The kit is in its original packaging in the transport rack. ✔ Highlights ✅ Model 306515R ✅ Dimensions: approx. 9.15 x 20.00 x 4.50 m (30 x 65 x 15 ft) ✅ Robust round arch steel construction ✅ Galvanized steel pipes for high corrosion resistance ✅ Durable 300 g/m² PE fabric tarpaulin ✅ Large driveway with roller door ✅ Ideal for agriculture, commerce, industry and construction sites ✅ Supplied a ...

There are a total of two identical devices for sale this is device No. 1 of 2 Manufacturer: Systèmes-Attum (France) Model: CS17 Industrial touch screen PC/HMI control panel ATEX certified for hazardous areas Certification: II 3 G Ex nA [ic] IIB T4 Gc Certificate: DEKRA 15 ATEX 0052X Intel Celeron J1900 processor, 1.99 GHz 4 GB RAM 120 GB memory Wi-Fi integrated Passive cooling USB, COM and network ports available Robust industrial housing Made in France Used condition with usual signs of wear Auction-ID: A1-49581-80301

• Safe control by microprocessor, regulation by ambient air or by the skin probe, audible and visual alarms. • On a stand on wheels Dimensions: 1200 x 690 x 1500 mm Condition: second-hand equipment, sold as is Auction-ID: A1-50069-99

• Safe control by microprocessor, regulation by ambient air or by the skin probe, audible and visual alarms. • On a stand on wheels Dimensions: 1200 x 690 x 1500 mm Condition: second-hand equipment, sold as is Auction-ID: A1-50069-100

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

max. tensile force: 20 to, max. stroke 1250 mm, max. cutting speed: 7m/min, maximum return speed: 25 m/min. max. workpiece 580 mm, max. tool 90 mm, clearing: 2 pieces, round-clock table, automatic workpiece feeder device, year 1960

Incubator from Heraeus Type: B 5090 E Rated temperature: 70C 2-door glazed Dimensions: length x width x height: approx. 119 x 71 x 75 cm Weight: approx. 70 kg

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Industrial robots Kuka KR150 Series2000, And KR150L130, KR150L110, KR210 Built 2001/2002 Range 2700mm, 2900mm, 3100mm, 2700mm Payload 150kg, 130kg, 110kg, 210kg Weight 1245kg Connection line 7m or 15m Control KR C2 Weight 185kg Software stand V4.1.5 Hand programming kCP2 ..

Gr. Pulling force: 16 to., gr. Stroke 1250 mm, Gr. Cutting speed: 5, 6 m/min Gr. Return speed: 30 m/min

more tech. Details on request

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

used injection nozzle cleaning master construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no two machines same to construction exist

Input Board PC 1 NE 80 (Grundig 9.44904-1706 FD-Nr. 6006 04 100643) Exchange 520,-€ + Mwst Without Exchange 620,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Input Board PC 2 NE 90 (Grundig 9.44904-1708 FD-Nr. 6006 04 100662) Exchange 400,-€ + Mwst without Exchange 500,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB