134,373 used machines on RESALE, but how to find them? Machine Search
Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,
Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools
tube diameter: 4-20 mm wall strength: 2 mm bending radius min.: 10 mm bending radius max.: 75 mm bending speed: 35 mm/min pull up length of tube: 2000 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 1,1 t dimensions: ca. 3100x1000x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15
tube diameter: 12-54 mm (Kupfer / Edels. mm serial number: EBD 022 99 002 mode of operation: Schneiden/ Entgraden / Re speed: Rollen 450 U/min m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: bis 60 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High-speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. External tube feed lift, water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lif ...
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/min ...
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: ...
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/min ...
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/min ...
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade plastic tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minu ...
Terrier tube hook 70mm 0-5000kg lifting capacity Auction-ID: A1-48648-267
Stock number: A208, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Amount of tubes: 60 pcs., Tube size: L 2450 mm., Product tube diameter: Ø 20 mm., Heating surface: App. 9,23 m², Outer dimensions: Ø 350 x L 2700 mm.
Terrier tube hook 70mm 0-4000kg lifting capacity Auction-ID: A1-48648-266
tube diameter: ? mm wall strength: ? mm bending radius min.: ? mm roll diameter: div. ca. 100 - 240 mm roll diameter - bore: 60 mm Shipping weight: 950 kg Packing: 1,20,80,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: A203, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Amount of tubes: 36 pcs., Tube size: L 3000 mm., Product tube diameter: Ø 20 mm., Heating surface: App. 6,78 m², Outer dimensions: D 375 x L 3050 mm.
Stock number: A205, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Product tube diameter: App. Ø 30 mm., Outer dimensions: D 260 x L 2810 mm., Other: Spiral tube
Stock number: F350, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube closing/welding, Variable speed: Yes, Welding: Max. L 70 mm., Tube height: Max. H 125 mm., Theoretical capacity: Min. 17 stroke/min. - max. 37 stroke/min. , Dosage: Prepared for dosing with bottom filling, Type: Spinning type with electric heat and water cooling
Stock number: A198, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Amount of tubes: 53 pcs., Product tube diameter: Ø 13 mm., Insulated: Yes, Heating surface: 20,4 m², Design pressure: 8 bar, Dimensions: D 500 x L 4450 mm., Manufacturer: Kähler & Breum, Type: 21 UB 4x40 R. SPEC, Year: 1998
Stock number: A201, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tube heat exchanger, Outer dimensions: L 3000 mm., Connections: Ø 2, Temperature: Max 180° C, Manufacturer: Tetra Spiraflo, Type: Monotube 2/2,5-30, Year: 1989
Stock number: A061, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Construction: Consists of 2 pcs., Amount of tubes #1: 16 pcs. of L 1900 mm., Core: Ø 1 heating/cooling, Product tube diameter #1: Ø 1½ , Double jacket #1: Ø 2 heating/cooling, Amount of tubes #2: 1 pc. of L 1900 mm., Product tube diameter #2: Ø 1½ , Double jacket #2: Ø 2 heating/cooling, Heating surface: Total area 6,0 m²
Stock number: A185, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 4 pcs., Item: Tube heat exchanger, Dimensions: L 1750 x Ø 220 mm., Amount of tubes: 24 pcs., Product tube diameter: Ø 14 mm., Insulated: Yes, Heating surface: 1,6 m², Manufacturer: OY Sanatasalo-Sohlberg AB, Type: FA 200 H4
Stock number: A010, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Standing: 3 pcs. legs, Product tube: 25000 mm., Product tube diameter: Ø 12 mm., Manufacturer: Pasilac, Type: RDF
With asortment tube holders Auction-ID: A1-48959-171
With asortment tube holders Auction-ID: A1-48959-169
With asortment tube holders Auction-ID: A1-48959-170
With asortment tube holders Auction-ID: A1-48959-166
With asortment tube holders Auction-ID: A1-48959-167
Packed in 10x box, on and including 1x pallet Auction-ID: A1-48959-737
Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 29-0520 Year of construction 1992Brush diameter 250 mmBrush width 25 - 55 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNerg connection 380 Volt, 50 Hz- Material supportSpace requirement L x W x H 500 x 450 x 440 mmWeight 45 kgGood condition; used
Brush deburring machine, tube deburring machine BAUER type BE 1Masch. No. 05-72025 Year of construction 2005Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 3 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brushSpace requirement L x W x H 550 x 450 x 440 mmWeight 65 kgGood condition; used
Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used
With asortment tube holders Auction-ID: A1-48959-164
With asortment tube holders Auction-ID: A1-48959-168
maximum number of results exceeded
please refine your search
10 € 
