tube in tube used for sale

General SKU291Y474 MakeYstral TypeZ 15.000 S Year of construction2005 LocationBarneveld Main Features MaterialStainless steel Motor15 KW Rotor140 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesø 140 x 80 mm Inletø 65 mm Outletø 80 mm Number of stages:1 Capacity± 30 m³/h With mechanical sealcheck Motor± 15 kW MaterialStainless steel 1.4462 (Duplex2205) General Floorspace1,30 x 0,60 m Total height0,55 m Weight200 kgOils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsInline high shear mixersNew arrivalsYstralIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > BiotechnologyIn ...

General SKU291Y497 MakeBecomix TypeDH 50 / DH 1200 No.04/2-503 Year of construction1994 Main Features MaterialStainless steel Motor22 KW Rotor185 mm Specified Features - Inline mixer Rotor sizesø 185 x 40 mm Inletø 125 mm Outletø 65 mm Number of stages:1 Capacity1200 l./h With mechanical sealcheck Motor22 kW (400 V 3040 rpm) Rotor speed3040 rpm MaterialStainless steel 1.4404 (316L) General Mounted on framelegs LocationBarneveld Floorspace0,55 x 1,00 m Total height0,85 m Weight350 kg CEcheck Extra SpecificationsWith pressure vessel for mechanical seal, pressure 3 bar, volume 2 l.Oils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsInline high shear mixersNew arrivalsBecomixIndustries > Food ...

Max. throughput: 156 cartons or 15 pallets/h, max. pallet height including load carrier: 1989mm, max. pallet weight including load carrier: 800kg, equipment: KOCH gantry/axis system with automatic carton and pallet handling, automatic empty-pallet and interlayer handling, product infeed with barcode recognition, extensive product and pallet conveyor technology, automatic pallet wrapping using a Lachenmeier wrapper, automatic pallet labeling by Bluhm Systeme, automatic pallet weighing by Bizerba, several stationary and mobile operator panels, central KOCH system control with remote-maintenance capability, extensive safety and protective equipment, including documentation. The system was only lightly used and has very low operating hours.

turning diameter: 140 mm turning length: 615 mm control: C200-4D spindle passage: 65 mm Main spindle: turning speeds: 5.000 U/min max. torque at 40% / 100% load: 145 / 105 kW turret-slide: 1,2 und 3 x-travel: 110 mm z-travel: 360 mm y-travel: 70 mm rapid traverse X/Y/Z: 25/12/45 m/min Opposed spindle: slide travel X-axis: 150 mm Z- Travel: 600 mm turning speeds: 5.000 U/min B - axis: B-Korrekturachse +/- 1 ° tool turret - number of stations: 3 x 12 tool taper DIN 69880: VDI 25 x 48 C-axis: 0,001 ° total power requirement: 61 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built i ...

On behalf of a customer, we are offering an HP4200 MultiJetFusion 3D printer system with a post-processing station and build units. The device comes from a medium-sized company and is in good, used condition. The maintenance contract (3DaaS) was active until 2024., - Number of print jobs: < 1000, Scope of delivery:, - 1 x HP4200 MJF 3D printer, - 1 HP Processing Station, - 2 pcs. Build Units, - various spare parts such as filters etc., Optional services performed by certified HP technicians:, - Professional disassembly and packaging. Delivery in an original HP box (packaging not included, deposit required)., - Installation and commissioning, - Instruction in operation, operation, and aftercare (in English). Duration: 3-5 days, depending on the desired scope, printing technology: HP Multi Jet Fusion Technology, Installation space in mm (x/y/z): 380 x 284 x 380 mm (15 x 11.2 x 15 inches),  ...

On behalf of the customer, we offer an HP4200 post-processing station. The device comes from a mid-sized company and is in good, used condition. Maintenance contract (3DaaS) was active until 2024., - Number of print jobs: < 1000, Scope of delivery:, - 1 pcs. HP Processing Station, Optional services, performed by certified HP technicians:, - professional removal and packaging. Delivery in original HP crate (packaging is not included in the delivery, deposit required), printing technology: HP Multi Jet Fusion Technology, Installation space in mm (x/y/z): 380 x 284 x 380 mm (15 x 11.2 x 15 inches), build speed: 4210/4200 Drucker: 4500 cm³/hr (274 in³/hr) 6 13, Layer thickness: 4210/4200 printer: 0.07 to 0.08 mm (0.0027 to 0.0031 inches), resolution xy: 1200 dpi, Machine dimensions in mm (w x d x h): 2210 x 1200 x 1448 mm (87 x 47 x 57 inches), Operating range in mm: 3700 × 3700 × 2500 m ...

Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor bel ...

INTOS ?ebrák FN 20 Fräsmaschine Universal + Zubehör Hersteller: INTOS ?ebrák Typ: FN 20 Zustand: gebraucht Baujahr: 2003 Gewicht der Maschine: 910 kg Abmessung: ? Länge mm: 1690 ? Breite mm: 1270 ? Höhe mm: 1175 Aufspannfläche des Senkrechttisches: 216 x 680 Aufspannfläche des Winkeltisches: 240 x 600 Die breite und Abstand der T-Nuten mm: 12H8 x 45 0,1 Spindeldurchmesser im Vorderlager mm: 45 Spindelkegel: ISO 40 Spindeldrehzahlen: 18 Bereich U/min: 50 ? 2000 Vorschübe : 18 Bereich mm: 8 ? 400 Eilvorschub mm/min: 1340 Bewegung des Spindelstockes: ? von Hand: 200 ? selbstständig: 190 Durch Verstellung des Halters erzielte Auslegung mm: 42 Tischlängsbewegung: ? von Hand mm: 300 ? selbstständig mm: 290 Senkrechtbewegung des Tisches: ? von Hand mm: 350 ? selbstständig mm: 340 Lieferumfang: ? INTOS ?ebrák FN 20 Fräsmaschine Universal ? Zubehör  ...

For sale is a compact walk-in cold room from GGM Gastro with a matching wall-mounted refrigeration unit. The cold room is configured as model KC2424 and offers a usable volume of 10.09 m³. The exterior dimensions are 2,435 x 2,435 x 2,110 mm, the interior dimensions 2,270 x 2,270 x 1,950 mm. The unit is equipped with 80 mm PUR insulation, insulated floor, lockable swing door, and an internal emergency opening., The cooling is provided by a wall-mounted cooling unit GGM KWC200N. In the photos, a Rivacold BEST W25 unit is visible. The unit operates with the natural refrigerant R290 and is intended for normal cooling in the range of -5 °C to +5 °C. The design up to 11.8 m³ at an ambient temperature of 32 °C matches the existing cell size of 10.09 m³., The system is suitable for cooled storage of foods, raw materials, beverages, delicatessen products, meat and sausage products, dairy p ...

Key data: 470 A, 550 , 60

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

- 5 Axis Simuteneous EIA/ISO - Milling spindel with Threading Function - Extra M-Code (1 pair for 2-M-Code) - Preparation RMP-60 - Sub spindel with C Axis any C1 + C2 Synchronisation - Lower revolver with Live tools 6000 Rpm - IKZ with 70 Bar main spindel - IKZ with 15 Bar on lower Revolver - Knoll Filtration KF-400/2300 - SMW KNCS-N-325-104 3 chuck - Robotunits C4N Belt conveyor / Part catcher with side conveyor belt - CAPTO SANDVIK Tooling package with 36 tools (ca 16 included Turn & Mill)

CONTROLS   electronic controls SIEMENS S7 PRESS DESIGN   drive system: servomechanic PRESS FORCES   total force (nominal): 630 to PRESS TABLE   table surface (left-right): 5450 mm   table surface (front-back): 910 mm SLIDE   table surface (left-right): 5500 mm   table surface (front-back): 800 mm SLIDE (MECHAN. PRESS)   stroke adjustment: yes   stroke min.: 220 mm   stroke max.: 350 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 680 mm COIL CHAIR   coil weight max.: 8 to DECOILER   sheet width max.: 410 mm   coil weight max.: 8 to   max. diameter of coil: 2000 mm TRANSFER SYSTEM   number of tool stations: 20   distance between tools, stroke X fixed: 225 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 28000 mm   space requirements - ...

turning diameter: 510 mm turning length: 1000 mm control: MAZATROL T PLUS total power requirement: 22-26 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Inauen Maschinen AG mobile traysealer, type: VC999/TS 10 N, machine number: 4106129, year of construction: 2006, 400 V, 4 kW, 6-8 bar, 50 Hz, dye: (2x) 195 mm x 130 mm, film width: 360 mm, Rietschle vacuum pump, type: VCA 40 (10), machine number: 06 2610514, 1,1 kW, 40 m3/h, total dimensions: 1100 mm x 1300 mm x 1800 mm. Including pallet with film.

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 400,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 500,- 2 pcs permanent magnet DC servo motor, Indrumat, type: MDC 10.40C / MMA-0/ S06

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 400,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 500,- 2 pcs permanent magnet DC servo motor, Indrumat, type: MDC 10.40C / MMA-0/ S06

Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data Manufacturer: KHS Model: ...

7 pcs Index VD30 mounts with capto interface, 3 pcs driven by it, mint condition!

EDM machine Agie Agiectron Integral 2 BJ 1997

turning diameter: 500 mm turning length: 910 mm control: Mazatrol Smooth G axis stroke (X,Y,Z): 450/200/960 mm : 1436 mm rapid travel x/y/z: 40000 mm/min rapid travel W: 30 m/min Main spindle:: spindle turning speed range: 5000 U/min Motor output (40%ED): 11 KW capacity at 100%: 7,5 KW spindle bore: 76 mm bar material dia.: 65 mm spindle nose: A2/6 3-jaw chuck: Kitagawa BR08 milling spindle: turning speed range: 12000 U/min power capacity: 7,5 kW tool taper: Capto C6 tool change unit: numbers of positions in the tool changer: 36 max. tool diameter: 125 mm max. tool length: 210 mm max. tool weight: 5 kg 2nd Spindle:: Subspindle Power: 11 / 7,5 kW Subspindle - speed: 5000 U/min spindle bore: 61 mm spindle nose: A2/5 total power requirement: 51,1 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,8 x 2,5 x 2,5 m - CNC Control Smooth G - Main & Subspindle - ATC for 36  ...

control: SIEMENS - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: SIEMENS - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

turning diameter:270 -300 mm turning length:710 mm total power requirement:43 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with live tools:VDI40 Live tooling VDI40 with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version Chip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:626 mm turning length:3000 mm Turning diameter:600 mm spindle bore:100 mm spindle turning speed range:2800 U/min weight of the machine ca.:18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device

Complete reconditioned Caterpillar C9 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa. com, überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 4ZF: 1660270 1660273 1687966-7967 1693788-1693791 1716598 1747515-7516 1747518-7519 1747521-7522 1765509 1769269 1771414-1771420 1794952 1794954 1794956 1794958 1870470-0471 1910127 1944160-4161 2037058 2051484 2083027 2090527-0528 2115020 2155528 2164798 2164800-2164804 2336935 2342917 2354129 2370283 2420067-1676 2421677 2429110 2538366-8367 2545748-2545753 2555205 2641329-1330 2671315-1316 2856123 2901143-2901145, 7AZ: 1693791 1716598 1870470 2083027 2115020 2342917 2354129 2370283 2545750 2545752, CLJ: 1968493 2010333 ...

Complete reconditioned Caterpillar C18 industrial engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact sales on www.hamofa. com, , BDN: 3390032 3442365 3466743 3466745 3505414 3507655 3507664 3516331 3660331 3660332 3660334 3660335 3662750 3665643 3670852 3761311 3761312 3901782 3901783 4434685 4627717 4728136 4728139, BE2: 4321964 4366389 4370377, EJG: 2410018 2543824 3264061 3264761 3605970 3605971 3678505 3678506, GJE: 3264061 3264761 3605970 3605971 3678505 3678506, JDA: 3253283 3266581, N8F: 3765374 3765376 3765377 3857727 3857728 4240056, NBB: 3149713 3149714 3311789 3311790 3645379 3645434 3645443 3645476 4228810 4343754-4343756, PRL: 3048533 3260703, R4L: 3016805 3424633 3473707 3473708 3547688 3592012 3612444 3704606, RDP: 3643723 ...

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1170 mm -Wall thickness: 17 mm -Length: 4340 mm -Weight: 476 kg/m

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1010 mm -Wall thickness: 10 mm -Length: 4770 mm -Weight: 248 kg/m

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 810 mm -Wall thickness: 25 mm -Length: 4820 mm -Weight: 486 kg/m²

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1250 mm -Wall thickness: 18 mm -Length: 920 mm -Weight: 519 kg/m

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1420 mm -Wall thickness: 12,5 mm -Length: 920 mm -Weight: 434 kg/m²

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 560 mm -Wall thickness: 16 mm -Length: 2880 mm -Number: 3x steel pipes available -Price: per piece -Weight: 214 kg/m²

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1050 mm -Wall thickness: 25 mm -Length: 2210 mm -Weight: 642 kg/m

Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Handover: in its current condition as inspected -Condition: the steel pipe is bent -Diameter: 1220 mm -Wall thickness: 18 mm -Length: 10,000 mm -Weight: 520 kg/m²

Used tube-in-tube pasteurizer, made by Bucher, model: PWAP 12000 -S. New: 2016. Capacity: 10.000 - 12.000 liters / hour.

Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice /  ...

Consisting of various types and sizes of tube and tube material. Longest length approx 7000mm Auction-ID: A1-49875-126

Indexing tube without man 40/54 tap MAN Part Number: 419.01.004

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Bridgestone, J-Lug tire with inner tube -Tire size: 7.50-15 -Quantity: 1 tire available -Dimensions: Ø 775 x 185 mm -Weight: 37 kg

Batch of 19 boxes of Thermaflex ThermaSmart PRO Coil tube insulation E-18/9. Diameter: 18mm Thickness: 9mm Length: 23m Auction-ID: A1-48529-110

With stainless steel rack. Total approx. 90 pieces. Stock. Shelf size approx. L150 x W115 x H190cm. Auction-ID: A1-49846-24

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50