tube in tube used for sale

FFG - EMBA 170, Model: 170, Year 1997, Max.Size: 1700x600 mm, Min.Size: 300x175 mm, Vacuum feeder, 4 Color Printing Unit, Motorised Slotter, Rotary Diecutting, Folder Gluer - hhs Glue System, Counter Ejector, Prefeeder, Strapping machine

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 oxygen sensor OD Accuracy: ±0.5% OD Concentration: 0.00 - 20.00 / 0 - 90 mg/L Dissolved oxygen - saturation: 0.0 - 200.0 / 0 - 600% (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature range: 0.0...+50.0 °C Temperature accuracy: ±0.1°C Power supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode/5000 in automatic mode In good condition

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Specified Features - Inline mixer MaterialStainless steel 1.4404 (316L) General With switchgear(as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO.with:IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400 ...

Inline - BGM 3600, Jahr 1989, Max.Size: 3600x1600 mm mit Skipfeed: 3600x2100 mm, Min.Size: 1200x600 mm, 2 Color Printing Unit, 2x Sloter, Rotary Diecutting, Folding gluing, Taper, doublehead- Stitcher, Strapping machine, Stacker

Qty. 1 Second-hand Sendzimir Cold Rolling Mill Mfc.: INNSE Type: ZR23 C-25 – 20-Hi Built: 1977 Stopped: 2025 Steel grades: HSLA, low and high carbon steel, etc. Strip width: 300 - 650 mm Thickness: 0.05 – 3.0 mm Max. tensile force: 15.000 kg Coil weight: 10 T AGC & PLC system: ABB

Manufacturer: INDEX Model: INDEX ABC Year of Manufacture: 1997 - With bar feeder and chip removal Electrical Specifications - Power Supply: 3-phase, 50 Hz - Rated Voltage: 400 V - Control Voltage: 24 V - Rated Current: 32 A Synchronous Spindle - Collet Clamping - Max. torque (Md max. 25%): 10 Nm - Max. speed: 4500 rpm - Max. collet diameter: 42 mm - Clamping depth at max. collet diameter: 38 mm - Spindle bore diameter: 15.5 mm - Max. ejector stroke: 36 mm - Max. clamping pressure: 65 bar Synchronous Spindle - Chuck Clamping - Max. torque (Md max. 25%): 10 Nm - Max. speed: 4000 rpm - Max. chuck diameter (external): 75 mm - Max. ejector stroke: 42 mm - Max. jaw stroke: 0.6 mm - Max. clamping pressure: 20 bar Rear Tool Carrier for Backworking Operations - Capacity: up to 5 fixed tools - Capacity driven tools: up to 3 fixed and 2 driven tools - Max. speed (driven tools): 6000 rpm  ...

This 7-axis Index G300 L YB was manufactured in 1999. It features a maximum turning diameter of 270 mm and a maximum swing diameter of 590 mm. The machine includes a robust tool system with 12 stations and a milling spindle speed of up to 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Index G300 L YB horizontal turning machine we have for sale. Contact us for further details.

This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details.

CO₂ laser cutting machine manufactured in 2016. This HARTWEG industrial Bodor CL-1610XUF features a working area of 1600 × 1000 mm and a laser power of approximately 150 W. It offers impressive engraving speeds of up to 60,000 mm/min and cutting speeds of up to 40,000 mm/min. If you are looking to get high-quality laser engraving and cutting capabilities, consider the HARTWEG industrial Bodor CL-1610XUF machine we have for sale. Contact us for further details.

The used palletizer from KHS INNOPAL Lord 1BUN1 is a specialized palletizer – a renowned manufacturer of machines for the beverage, food and packaging industry from KHS. The INNOPAL Lord 1BUN1 series model is known for its high efficiency (up to 420 layers/hour), which gives 75 thousand bottles per hour of nominal capacity, in the offered unit the capacity was set at the level of 45-50 thousand / hour. Due to the configuration of other elements of the line, the said unit is characterized by high flexibility and modular design, as it has an additional automatic head for palletizing crates and cartons, so it is ideal for palletizing crates, cartons, trays, returnable packaging or bottles. The year of production of the polarizer is 1999, installed in 2000, the polarizer in 2016 underwent modernization (replacement of guides with new ones), under the supervision of KHS service. In additio ...

bore capacity in steel (diameter): 40 mm throat: 220 mm bore stroke: 120 mm spindle taper MT: 4 spindle turning speed range: 105 - 1257 U/min no. of turning speeds: 8 Stufen table surface area: 400 x 320 mm base plate: 390 x 650 mm voltage: 400 V / 50 Hz total power requirement: 1,1 / 1,8 kW weight of the machine ca.: 0,3 t range L-W-H: 2,1 x 1,0 x 0,7 mm with quick-action drill chuck 3-16 mm, drill chuck protection, work table can be rotated, swiveled and height-adjusted, coolant device, lighting, right/left spindle rotation, mechanical depth stop, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scan 100 colony counter - Dimesion: (L x W x H) 31 x 25 x 18 cm -Able to count the colony of microorganism for following petri dish dimension size (55, 65, 90, 150 mm) Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

Lg.Nr. 26092 Technical data: - 90° cutting head pneumatically operated - Cutting thickness - normal steel up to 2 mm - Stainless steel up to 1.5 mm - Aluminium up to 3 - Blade length 130 mm - Table size W 600 x D 380 mm - Working height 940 mm - Footswitch - Compressed air requirement 6 - 8 bar - Space requirement approx. W 600 x H 1250 x D 850 mm - Weight approx. 180 kg

A relatively new CNC waterjet cutting system Intermac is available. Working dimensions X/Y: 3000mm/2000mm, operating hours: approx. 4500h. Documentation available. An on-site inspection is possible.

Reebow auto stacking machine Automatic extraction and sorting machine (auto-stacking machine inclusive of control softwareV.10） Specification: 1. Strip off 5 loves/time (clamp type machine) 2. For nitrile glove production line with maximum speed of 160pcs/minute. 3. It can be used for 2.6~5.5g nitrile glove 4. Entitle to fulfill nitrile glove length 240±10mm if interested kindly contact; F31 Ms Aqilah (0176742799) Email: naqilah_m@topglove.com.my

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: An automatic wrapping machine specially designed for bundling and packaging soap bars. Packaging material: The machine processes heat-sealable films from the roll, such as cellophane, polypropylene (PP) or PVC. Speed: up to 80 multipacks per minute; Product length: 75 mm ... 280 mm; Product width: 65 mm ... 120 mm; Product thickness: 25 mm ... 120 mm; Weight: approx. 1500 kg; Connected loads: 380-400 V/ 50 Hz; with control cabinet; Oil-tight steel frame that contains all mechanical movements Technical documentation available more photos on request Loading FREE Truck

Key data: 1875 mm, 1550 mm, 1345 mm

CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Control Siemens C 200 – 4D Turning diameter: 100 mm Turning length 280 mm 8-fold revolver with applied revolver Wkzg. 6-fold revolver with applied revolver Wkzg. Spindle speed 6000 min-1 Max. bar passage 60 mm Rear drilling unit for 5 stations Chip conveyor Knoll Coolant system

Sevenchefs DC-203 dicer dicing machine. Blade assembly included with spare parts included. This item was purchased brand new and only used for 2 months. This is in impeccable like new condition.

Fluid bed manufactured by INOJETT in 2004. Model IEV800-001-2004 Peripherals included: DFO 4-32-R baghouse Air heater Technical characteristics Model IEV800-001-2004 Year of manufacture 2004

General SKU013X039 MakeHeinkel TypeHF-300 No.1013/12 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Motor1.35 KW Inlet diameter300 mm Specified Features - Basket centrifuge Basket centrifuge:Inverting filter centrifuge: Basket sizesdia. 300mm Max. loading weight8,2 kg Hydraulic drivecheck With hydraulic unitcheck Max. basket speed3464 Rpm MaterialStainless steel 1.4571 (316Ti) General With switchgear(as is) 1,2x0,4x1,5m 250kg and 0,6x0,4x0,8m 100 kg Floorspace1,7x1,1 m Total height2,1 m Weight1000 kgPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDiscountE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalBasket centrifugesAPIMinerals & inorganicHeinkelIndustries > Food & Feed > Powdered foods ...

General SKU043R201 MakeEllerwerk TypeWFZ 630 No.90.005 Year of construction1991 LocationBarneveld Main Features MaterialHastelloy Motor22 KW Inlet diameter630 mm Specified Features - Basket centrifuge Basket centrifugeBasket on horizontal shaft Basket sizesDia. 630x230mm Wall thickness10mm Max. loading weight100 Kg With scrapercheck Hydraulic operatedcheck Liquid outletwith filtrate cyclone Motor22 kW, 380 Volt (Ex) Max. basket speed2000 rpm MaterialStainless steel 2.4602 (Hastelloy C-22) General ATEX designedcheck Extra Specifications- :Inverting bag centrifuge:Powdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDiscountE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalBasket centrifugesAPIMinerals & inorganicEllerwerkIndustri ...

Manufacturer: NeoDen Model: IN6 Year of Manufacture: Type of Machine : Reflow Oven Key Technical Specifications - Power supply: 110/220 VAC, 1-phase (household power compatible) - Rated power: 2000 W maximum - Heating zones: 6 total (3 upper / 3 lower) - Heating type: aluminum alloy heating plate with nichrome wire - Cooling zones: 1, with bottom cooling fans at offload section - Conveyor speed: 5 to 30 cm/min (2 to 12 inch/min) - Maximum PCB height: 26 mm - Soldering width: 250 mm - Process chamber length: 680 mm (26.8 inch) - Temperature range: room temperature up to 300 degrees C - Temperature control accuracy: +/- 0.2 degrees C - PCB temperature distribution deviation: +/- 1 degree C - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Machine dimensions: 1020 x 507 x 350 mm (L x W x H) - Packing size: 112 x 62 x 56 cm - Net weight: 49 kg - Gr ...

Size: Equipments: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Manufacturer: OPS-Ingersol Model: EAGLE-V5 Precision-Line Year of Manufacture: 2025 Type of Machine : Milling Machine with Multi Change Automation Condition: Used.Ready for operation, connected to power Travel Distances - X axis: 550 mm - Y axis: 400 mm - Z axis: 400 mm Rotary Table - Swivel/rotary table with torque drives Spindle - Spindle type: HF spindle HSK-E40 with DDF by Fischer - Spindle speed: 1 to 42,000 rpm - Spindle power: 15 kW - Torque S6 (60%): 6.7 Nm Tool Magazine and Control - Tool magazine capacity: 100 positions - Control: Heidenhain - Weight: 8,500 kg Extra Accessories can be negotiated into the offer. - 20x Erowa ITS 148 Palette Type G with clamping studs for automation - 13x HSK E40 shrink fit chuck d3 by Haimer - 28x HSK E40 shrink fit chuck d4 by Haimer - 14x HSK E40 shrink fit chuck d5 by Haimer Find more here - .ucymachines/ Contact us at - sales@ ...

A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible.

Manufacturer: NeoDen Model: IN8C Type of Machine : Reflow Oven - Heating zones: 8 total (4 upper / 4 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: 3.6 kW - Typical working power: approximately 1.5 kW - Machine dimensions: 1660 x 607 x 1075 mm (L x W x H) - Net weight: 241 kg - Gross weight: 308 kg Standard Accessories Included - ...

This 2-axis Index ABC 63 was manufactured in 1999. It has a rated power of 13 kW and a machine weight of approximately 2100 kg. If you are looking to get high-quality turning capabilities, consider the Index ABC 63 horizontal turning machine we have for sale. Contact us for further details.

Manufacturer: NeoDen Model: IN12C Type of Machine : Reflow Oven Technical Specifications -Heating zones: 12 total (6 upper / 6 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: approximately 4.8 kW - Typical working power: approximately 2.2 kW - Machine dimensions: 2300 x 650 x 1280 mm (L x W x H) - Net weight: 300 kg - Gross weight: ...

GR2A 7 (7 kw) - 2024 - 9 months warranty GR2A 20 (20 kw) - 2016 - 6 months warranty GR1AC 30 (30 kw) - 2022 - 9 months warranty GRAV 45 (45 kw) - 2015 - 6 months warranty GRAC 55 (55 kw) - 2010 6 months warranty GR1A 60/X (60 kw) - 2022 - 9 months warranty GR1AC 120 (120kw) - 2013 - 6 months warranty GRAC 125 (120kw) - 2012 - 6 months warranty IFGAV 200 (200kw) - 2024 - 12 months warranty GR1AV 480 (480kw) - 2013 - 6 months warranty

Permanent magnet motor, permanent magnet motor, electric motor, Perm.Magn-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Permanent magnet motor, permanent magnet motor, electric motor, Perm.Magn-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Qty. 1 Second-hand Aluminium Slitting Line Manufacturer: Stamco Inc., USA Year of Manufacturing: 1981 Strip Width: 1828 mm (72”) Trim 1981 mm (78”) Untrim Thickness: 0.2 mm to 1.27 mm (0.003” to 0.050”) Line Speed: 304 m/min - 609 m/min Thread Speed: 15 m/min Input/Output Coil Weight – 10 T Input Coil OD: 2400 mm (96”) Input Coil ID: 508 mm (20”) Capacity: 8 cuts of 1.27 mm and 10 cuts of 0.9144 at line speed 304 m/min 13 uts of 0.6 mm and 21 cuts of 0.25 mm at line speed 609 m/min

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

Length 4 m Width 1.75 m Height 3.40 m Color: Green Chain hoist El. Steel TYPE. P12 8 m / 2 m min 6 m chain

Height=1.57 m, Overall length= 0.82 m, Overall width= 0.82 m, Net weight= 143 kg,

5-axis robot: 3 axes are driven by servo motors (electric); Axis A and C - pneumatic Touch control panel Robot with adapter and protective housing

EQUIPMENT FOR GEOTECHNICAL AND ENVIRONMENTAL INVESTIGATIONS Original Gouda 20 ton static penetrometer for CPT tests, with mechanical tip and 50 operating rods mounted on Mercedes Benz Unimog Mod. U 404.0 Year 1972 Km 32.272, Mercedes-Benz 6 cyl. No. 130925 / 10 / 000070 DPSH heavy dynamic penetrometer for SCPT testing, hydraulic automatic release, vice with rod puller, 50 and 75 kg impact masses, with 15 rods Hydra Mini series portable hydraulic auger on wheels for surface environmental coring, with 250 kgm hydraulic gearbox and 1.00 m useful stroke

This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details.

Process Vessels Stainless Steel Mixer/Melting Tank Manufacturer: Dibir Group Srl Capacity approx. 120 litres Electrically heated, thermal oil Frequency-controlled agitator Temperature control

Washing system for trolleys and rack trolleys ELIONA / CERTEL, type: WR100.125.190 -in good condition- - For frames max. 1,000 x 1,250 x 1,900 mm - Boxes max. 600 x 400 x H 360 mm - Steam, hot water - Heating type: electric - El. Connection: 3x 400 V + N + PE, 50 kW Visits and test runs are possible by arrangement.

plate thickness: 4 mm plate length: 200 mm total power requirement: 3 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 1,0 x 0,8 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling a drying chamber - dryer, German manufacturer INNOTECH, type HT 4D. Year of manufacture 2007, fully functional. + 2 trolley, sieves. Make me offer !

Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.

A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement.

A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement.

A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.

Dough divider and rounder König Industrie Rex I 6 Condition: cleaned and tested Incl. dough funnel with lubrication, laterally movable with ladder Weight range: 30-100 g Max. hourly output: 18,000 pieces Siemens touch control with program memory Incl. 1 chamber drum Incl. 1 set for 4-row production, 1 set for 6-row production

Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power.