tube in tube used for sale

Drum ø 2000 mm; opening hopper approx. 3200x3000 mm; hopper equipped with 2 unbalance motors 1.5 kW; 1x underlying discharge conveyor belt 1800x8000mm; belt width 1400 mm; drum drive 5.5 kW; 1x elevator conveyor; belt width 1400 mm; length conveyor belt 10000 meters; discharge height approx. 4500 mm; Total weight approx. 18000 kg. Auction-ID: A1-50864-13

Built on a mobile metal table of 200 x 180 x 170cm. Equipped with control panel Juki IP-420 Auction-ID: A1-49565-19

Unused, stainless steel boiler, 3 motors independent, impact function, blowing function, 4 swivel castors Auction-ID: A1-40407-90

Cottingham racing trailer from 1989, fitted out for the transport and assistance of competition vehicles. The trailer has an interior space with benches, a central table, numerous storage cupboards and imitation wood flooring. It is equipped with several interior lights, electrical outlets and a ventilation system. The walls and ceiling are covered with panels, with some traces of use, scratches and visible marks. The rear part includes a space for transporting equipment or a competition vehicle. It is equipped with a non-slip metal floor, aluminium protectors and various storage compartments. A battery and electrical wiring are present. This trailer is particularly suitable for transporting racing cars, motorcycles, go-karts or equipment at sporting events. It can also be used as a support area, preparation area or as a base for event planning. General pre-owned condition, with sign ...

Condition: Unused, in the original packaging Steam cleaner Brand: Kremer Power: 2100 watts Steam pressure: 2 bar Temperature: 100 °C Tank capacity: 30 liter tank Functions: Wet & dry vacuum cleaner & steam cleaner Equipped with: Steam, suction and spray function Sterilization: Sterilization function Protection: Protected against overheating Includes: Various accessories Connection: 230 volts Auction-ID: A1-40407-114

Dräger Infinity Gamma – Patient Monitor with Docking Station Manufacturer: Dräger Model: Infinity Gamma Setup Included: Monitor, \"Pick and Go\" Docking Station, Original Dräger Power Supply, GCX Wall Arm, NIBP Cuff, SpO₂ Sensor, ECG Cable, Cables and Accessories (according to photos) Parameters: ECG, SpO₂, NIBP, Heart Rate, Integrated Thermal Recorder Condition: Good condition, functionally tested Auction-ID: A1-51275-171

Hospira Plum A+ – Volumetric Infusion Pump Manufacturer: Hospira Model: Plum A+ Cassette System, Two Inlet Lines Parenteral, Enteral and Epidural Infusions; Neonatal, Pediatric and Adult Condition : Good, Functional Tested Auction-ID: A1-51275-71

Dimensions = 122x66x155cm LxWxH; equipped with tilting system Auction-ID: A1-50864-62

unused in box; 4 engines; various accessories; equipped with 2 swivel wheels; 60 liter capacity; 3825 Auction-ID: A1-51256-515

unused in box; equipped with 2 swivel wheels; drain hose; 3 motors can be switched on separately; various attachments; stainless steel reservoir of 80 liters capacity; 3866 ; Auction-ID: A1-51256-519

Unused in the original packaging Compact and reliable inverter unit from JCB Continuous power of 1800 watts Maximum power of 2000 watts Suitable for construction, automotive and professional use Ideal for garages, workshops and mobile service Suitable for sensitive electronic equipment Reliable pull start 5.5 litre fuel tank Run time up to 8.5 hours at 50% load Clear and uncluttered LCD display European 230V socket 12V DC output USB-A and USB-C connection Suitable as a compact emergency power generator Low net weight of only 16 kg Compact and easy to transport Auction-ID: A1-40407-77

Technical data/execution Year of construction: 2018 Hour: 7157 Serial Number: W09368333J2D38005 MTU 6R1300, 390 kW at 1700 rpm Euro IV emission standard Additional hydraulic connection 30l/min and 70l/min Roller drive via gearbox 380kW VARIO Load Sensing System Fuel tank 950 litres Rear tire length 8,500 mm and width 1,200 mm, hydraulically foldable Anti magnetic part rear tire Longitudinal strap, length 4.450.mm and width 1,000mm Centralized lubrication points Electrical installation 24 volts Extra electric pump for the following functions in case of engine standstill Rear tire lift/lower/kink Comb opening/closing Optional: magnetic tape lifting/lowering Optional: folding hopper lifting/lowering Automatically revisable fan Reduction system L-C3 complete 3-axle semi-trailer Limiter type L, complete (20 pieces) Nozzle with hopper elevation Overband magnet for supporters Auction-ID: A3-461 ...

Unused in the original packaging 230 V ~ 50 Hz Power: 1200 W Suction power: 17 kPa Additional socket: 2000 W Power cable: 4 m Tank capacity: 30 L Hose length: 1.5 M Stainless Steel Tank Durable Casters Accessories included Accessory storage slots Auction-ID: A1-40407-78

Sieve surface 1600x4000 mm; 7.5 kW; plastic sieve deck; mesh size 4mm; mounted on concrete stacking blocks; is delivered without stacking blocks Auction-ID: A1-50864-12

Unused in the original packaging 3 motors a 1200w / per motor to be turned on, for wet and dry use, 3600W. This vacuum cleaner is designed for maximum flexibility. Whether it's fine dust, coarse dirt or liquids: it sucks it all up. Powerful Performance – With a whopping 3600 watts of power and operating at 220 volts, this machine delivers some serious suction power. Ideal for long-term and intensive use. Spacious capacity – Thanks to the 100 liter tank, you don't have to stop to empty as often. More work, fewer interruptions. Safe & certified – The vacuum cleaner complies with CE standards, which guarantees safety and reliability. Industrial design – Built for the toughest conditions. Solid wheels, strong housing and easy-to-clean filter system. N.W. 24 kg Sizes 58x53x105cm Auction-ID: A1-40407-73

unused in box; equipped with 2 swivel wheels; drain hose; 3 motors can be switched on separately; various attachments; stainless steel reservoir of 80 liters capacity; 3866 ; Auction-ID: A1-51256-4051

Unused in the original packaging Compact and powerful inverter unit from JCB Continuous power of 3800 watts Maximum power of 4200 watts Suitable for construction, automotive and professional use Ideal for garages, workshops and mobile service Suitable for sensitive electronic equipment Pull start, electric start and remote control Electric start with lithium-ion battery 9 litre fuel tank Run time up to 7 hours at 50% load Clear and uncluttered LCD display Two European 230V sockets 12V DC output USB-A and USB-C connection Suitable as a mobile emergency power generator Compact size and a net weight of 28 kg Auction-ID: A1-40407-63

Rated power of 2,000 W. 220 V power supply, equipped with metal tank, suction hose and wheeled frame. Auction-ID: A1-51273-38

Robust metal construction with protective housing and suction/discharge ducts. Elektim three-phase asynchronous electric motor, power 4.0 kW, power supply 220/380 V – 50 Hz. Rated speed: 2,890 rpm, IP44 protection class, Functional Auction-ID: A1-51273-20

Abbott LifeCare 5000 Plum Volumetric Infusion Pump Manufacturer: Abbott Model: LifeCare 5000 Micro Mode: 0.1 to 99 mL/hr – Macro Mode: 1 to 999 mL/hr Single Delivery, Dual Channel, and Multidose Condition: Good, Functional Tested Auction-ID: A1-51275-105

- Mercedes-Benz G 63 AMG with BRABUS 800 Rocket body kit - Registration date: 07/2015 - Mileage: approx. 84,000 km - Engine: 5,461 cc V8 petrol engine - Power: 420 kW / 571 hp - Transmission: 7G-TRONIC automatic - Drive: All-wheel drive (4x4) - Fuel: Petrol / Super 95 - Color: Gray / Black - Doors: 5 - Seats: 5 - Previous owners: 2 - Emission class: Euro 6 - Technical inspection/TÜV: until 06/2027 - 24-inch alloy wheels - BRABUS Rocket 800 Body Kit - Paintwork and body kit almost as good as new according to the provider - Leather interior with seat heating and seat ventilation - Electric seat adjustment with lumbar support - Multifunction leather steering wheel - Navigation system and on-board computer - Apple CarPlay and touchscreen - Wi-Fi/WiFi hotspot, USB, MP3 and speakerphone - Rear view camera - Front and rear parking aid - Blind Spot Assist and Hill Start A ...

Drive motor mould mill 110 kW; drive motor classifier 15 kW; supply pipe; including all air transport system including supply including magnetic separator; Jaudt dosing valve / cell wheel lock; explosion protection; GEA cairplus SX filter chamber; Equipped with landing floor 340x145; floor height 150 cm; with 3x various boxes parts explosion hatch; 1x complete overhaul kit stator blades; 1x new classifier in transport crate Auction-ID: A1-50864-2

BioMS Neonatal Incubator Natisse Élevage Incubator for the care of newborns, especially premature infants. Manufacturer: Bioms Model: Natisse Condition: To be repaired – lights up with error, not tested, sold as is Auction-ID: A1-51275-99

Built on a mobile metal table of 200 x 180 x 170cm. Equipped with control panel Juki IP-420 Auction-ID: A1-49565-20

Brand: Origin Model: Storm Ski Trainer Type: High Intensity Cardio Condition: Correct / functional condition / some signs of wear Dimensions: 63.5 x 83.8 x 137.2cm Auction-ID: A1-50612-25

Unused, frequenz 50hz/60hz, 18Kpa, 30Liter, noise 82db Auction-ID: A1-40407-103

Metal construction with cylindrical hopper, filling valve, . Equipped with a set of taps, All connection fittings and lever valve control included. Functional Auction-ID: A1-51273-36

Dräger Infinity Gamma XXL – Patient Monitor with Docking Station Manufacturer: Dräger Model: Infinity Gamma XXL Setup Included: Monitor, Pick and Go Docking Station, Recorder, Power Supply, GCX Wall Arm, NIBP Cuff, SpO₂ Sensor, ECG Cable, Cables and Accessories (according to photos) Parameters: ECG, SpO₂, NIBP, Heart Rate Status: Good condition, lights up and functional Auction-ID: A1-51275-172

General information Type: GDA2500IS Year of construction: 2026 Fuel: Petrol Weight: 22 kg Outputs 1x 230V AC 1x 12V DC (8A) USB Outputs: 5V (1.0A / 2.1A) Technical specifications Frequency: 50 Hz Continuous power (Running watts): 2000 W Maximum power: 2200 W AC Current: 8.7 A Maximum altitude: 1000 m Performance class: G1 Quality class: A Max. ambient temperature: 40°C Power factor: 1.0 Phase: Single phase Auction-ID: A1-51256-84

Pentax FI-10RBS – Bronchial Fiberscope / Intubation Endoscope Manufacturer: Pentax Model: FI-10RBS Configuration: Light cable and case included End angulation up to 160° Defects: A few black spots on the periphery of the image Condition: Okay, working condition Auction-ID: A1-51275-84

Stryker SwitchPoint Infinity 3 (SPI3) – OR Video Routing and Control System Manufacturer: Stryker Model: SwitchPoint Infinity 3 Part Number: P11130 Rev. Y Digital Video Routing, Multivisualization Video Standards: S-Video, Composite, RGBHV, 3G-SDI, HD-SDI, DVI, up to 1200p Condition: Good, Functional Tested Auction-ID: A1-51275-64

The bundle does not include the cabinet and display CNC lathe, in excellent condition. Rigid and precise machine, equipped with motorized tools and a C-axis, ideal for machining technical parts in general mechanics, industrial maintenance or serial production. Order: Fanuc Oi-TF Turning capacity: Ø 400 mm Bar Passage: Ø 102 mm Main pin: Power: 30 kW Speed: 1–3,500 RPM Turret: 24 stations, motorized tools C-axis: Yes Chip conveyor: Included Hydraulic chuck: 3 Ø320 samchully jaws Clean machine, stable geometry, silent spindle. Regular maintenance, professional use. Hydraulic chuck 3 jaws Chip conveyor Standard tool holders Technical documentation available but without a manual, it can easily be found Auction-ID: A3-46110-35869

Built on a mobile metal table of 200 x 180 x 170cm. Equipped with control panel Juki IP-420 Auction-ID: A1-49565-17

80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-51256-1035

CareFusion Infant Flow SiPAP – Neonatal Ventilator Used in Neonatal Oncology (NICU) for preterm or term infants in respiratory distress. Manufacturer: CareFusion Model: Infant Flow SiPAP Type: Non-Invasive Neonatal Respiratory Support System (nCPAP, BiPhasic) Configuration: Comes with wheeled stand and gas hoses Features: LCD touchscreen, FiO₂ 21–100%, alarms, RS-232 port, internal battery Weight: Approx. 8.8 kg (unit) Condition: Good, functional Auction-ID: A1-51275-147

Equipped with a door and a tilt-and-turn window as well as sockets. The aluminium frames are provided with Thiele safety glass. Including fence part, dimensions approx. 5300 x 1000 mm. Please note: The property has already been dismantled Auction-ID: A1-51269-446

total power requirement:413 kW Induction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mm X (electromechanical) 200 mm Maximum part diameter 600 mm Maximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30

internal diameter:140 mm total power requirement:5,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:2,8 x 2,5 m max. workpiece weight:15 kg clamping dia. max.:140 mm clamping length:250 mm max. bore diameter to be ground:0,8-90 mm min./max. hole to grind:160 mm centre height:90 mm workpiece spindle stepless:112-1000 U/min

pulling force - max.:2,5 t max. ram stroke:1000 mm max. workpiece diameter:40 mm Broaching speed:60 m/min. return speed:20 m/min. total power requirement:24 kW weight of the machine ca.:6 t dimensions of the machine ca.:1,7 x 2,4 x 4,77 m clamping plate:320 mm It is a hydraulic machine.

honing diameter:51 mm stroke:300 mm spindle speeds::600 - 3000 U/min feed range:1500 - 5000 mm/min spindle drive:1,1 kW weight of the machine ca.:0,8 t total power requirement:4 kW dimensions of the machine ca.:1,1 x 1,9 x 1,5 m

honing diameter:45-200 mm stroke:330 mm centre height:350-700 mm Motor output:1,5 kW Drill rods: Ø 60mm ? 3000mm long Ø 50mm ? 2600mm long Ø 42mm ? 1920mm long Ø 40mm ? 1920mm long Ø 26mm ? 1270mm long Ø 24 mm ? 1,000 mm long Ø 20 mm ? 2,000 mm long Typical features Feed: Infinitely variable in both directions Drive: Separate control of spindle rotation and vertical movement Centring: Manual or via dial gauge centring bridges Geometry & working range (approximate values based on the BO series) Drilling range (Ø): approx. 24 mm to 150 mm (depending on the drill rods and cutter heads used) Distance from table to centre of spindle: Variably adjustable (typically approx. 350 mm to over 700 mm for large commercial vehicle engine blocks)

internal diameter:315 mm grinding depth:315 mm swing diameter:420 mm number of spindle speeds:32 - 360 U-min wheel box:-drehzahl 100 - 8000 U/min face diameter:500 mm total power requirement:12 kW weight of the machine ca.:5900 kg dimensions of the machine ca.:3400 x 1750 x 2000 mm

automatic switch plate 1x saw unit with saw, head and saw valve 40/80 1x turning unit with turning valve 30/60 with flange 9x units 30/60 with valve normal and flanges 5x units 20/50 with valve normal and flanges 1x oil distributor WK9; 1x bar feeder 4 meters; 1x chip conveyor VR500; 1x hydraulic unit 1 Knoll oil filter Without collets and ejectors, without platform and without tool monitoring. supplied tooling may differ from the pictures. We can send you more pictures. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...

Roller sieve with sorting belt with \"Tomra\" autosort, (2018), 626 operating hours, working width 2800 mm, equipped with bottom outlet with funnel, discharge conveyor belt, cross discharge conveyor belt including metal platform. Please note! This lot is part of a combination lot. Namely lot 22. Auction-ID: A1-51255-4