tube in tube used for sale

DEBUS DES 112 Industrial Vacuum Cleaner / Vacuum Vacuum Cleaner – 2018 Specifications: - Brand: DEBUS - Type: DES 112 - Year of construction: 2018 - Factory Number: 9V043 - Product Type: Industrial Vacuum Cleaner / Vacuum Vacuum Cleaner - Supply voltage: 230 V - Frequency: 50 Hz - Motor power: 3.3 kW - Rated current: 14.5 A - Protection class: IP44 - Maximum negative pressure: 220 mbar - 3 speeds / positions - Mobile version Features: - Collection container - Flexible suction hose - Suction connection - Mobile chassis - Handle - Electrical connection - CE marking Application: - Previously used for sucking/removing oak processionary caterpillars and associated nesting material - Also suitable as an industrial vacuum/vacuum cleaner for other applications, depending on the material to be vacuumed Condition: - Working seen - 3 speeds/positions - Used condition with signs of wear - Seen wor ...

Diesel emergency generator Compal VG-R30 incl. trailer Technical data aggregate: - Manufacturer: Compal Power - Model: VG-R30 - Year of construction: 2026 - Condition: New - Power: 30 kW / 37.5 kVA - Serial number: LB2601145-004 - Engine manufacturer: Ricardo - Fuel: Diesel - Generator: Compal, 3-phase - Output voltage: 400 V / 230 V - Rated current: 54.1 A - Operating hours as reported: 1 hour - Machine weight: approx. 900 kg - Unit dimensions (L × W × H): approx. 2,200 × 900 × 1,200 mm - Soundproofed housing - Digital control panel - Automatic and manual operation - CEE sockets 230 V and 400 V - Instruction manual available Trailer – Included: - Manufacturer: Schmidt Fahrzeugbau - Model: FG 3000 HV - Year of manufacture / first registration: 2010 - Tandem axle trailer - Permissible total weight: 3,000 kg - Braked version with overrun device - Galvanize ...

Already disassembled. Is almost new. Has only been used 1x. Professional Verhulst air handling unit with heat recovery (WTW), originating from a commercial building. The installation has been used very little and is offered due to renovation/refurbishment of the building. Data: Brand: Verhulst Type: BASIC HR-WTW 10 MON Year of construction: 2013 Air flow: 0.28 m³/s Converted to approximately 1,008 m³/hour Equipped with heat recovery Professional design for utility Including existing pipe/duct parts and accessories as visible in the photos The installation has only been used to a limited extent. Location: Loenen (Gelderland). Auction-ID: A1-47449-128

Manufacturer: JD INDUSTRIAL Working parameters: Extendable type foldable container house Equipment included: Furnishing including bathroom, toilet, bedroom, living room and kitchen Transport dimensions (mm): 4000 × 2200 × 2500 Remarks: Model EH03; windows and glass doors; washbasin and toilet visible Auction-ID: A1-50671-219

Kohler J44 Generator Set – 44 kVA (New device) • Manufacturer: Kohler / SDMO Industries • Model: J44 • Version: IV • Year of construction: 2023 • Serial number: 23002931 • Design: Stationary, soundproofed diesel generator set • Operating hours: 21.2 h • Energy meter: 54 kWh • Weight: 978 kg Performance data: • Emergency power (ESP): 44 kVA / 35.2 kW • Continuous power (PRP): 40 kVA / 32 kW • Voltage: 400 / 230 V • Frequency: 50 Hz • Speed: 1,500 rpm • Phases: 3 • Power factor cos φ: 0.8 • Rated current PRP: 58 A • Rated current ESP: 64 A Equipment / Construction: • Diesel generator set with electric starter • Kohler APM303 digital genset control • Automatic, start and stop function • Digital display for operating and engine data • Soundproofed, closed steel housing • Large-scale maintenance and service do ...

Insulated office unit / porter's lodge – 3.9 × 2.2 m – electricity – panoramic glazing Movable office unit / porter's lodge, constructed from a steel frame with insulated sandwich panels. The unit has large windows and a finished interior. Specifications: Version: office unit / porter's lodge External dimensions (L × W × H): approx. 3,900 × 2,200 × 2,520 mm External size: approx. 8.6 m² Construction: Steel Frame Walls: insulated sandwich panels Color: gray/orange Roof: flat Version: movable Features: Glazed entrance door Several large windows Openable window Finished inside with light-colored wall panels White ceiling Maintenance-friendly floor finish Electrical installation Multiple 230 V wall sockets Light switch Ceiling lighting Electrical control/control unit Power cable for connection to a suitable power supply Particularities: Chargi ...

Specifications: 4 cylinder Power: 87 hp Hour counter: 1427 hours PTO: 540 and 1000 rpm Features: Comfort 2000 cab Gears on the handlebars 2 double-acting valves Crawler gear Drawbar Catch mouth Many extra parts, including: Comfort 2000 cabin complete, various interior parts, original exhaust, mudguards left and right, extra wheel set and turbo that fits on it Particularities: Hour counter no longer increases Trumpets overhauled, invoices available Brake master cylinder overhauled, invoices available Wheel bearings for adjusted Tank flushed Auction-ID: A1-47394-294

Oven 130 liters Maximum temperature: 70°C Elec: 230V 2.0 to 0.47 Kw Dimensions (mm): 700x550 H 840 Internal dimensions (mm): 560x400 H 610 Tray Dimensions (mm): 500 Maximum temperature (in C°): 70°C Auction-ID: A1-50994-97

International 644 4WD – very rare and fully restored For the true enthusiast or collector we offer this beautiful and very rare International 644 4WD (Allrad). It is a unique example that is equipped with almost all available options from that time. This tractor is equipped with: Original Stoll/front loader Fritz Meyer Cabin Synchronous speed gearbox Power steering 4x4 / Allrad four-wheel drive Heavy lifting device A few years ago, this tractor was fully and professionally restored and it is still in a beautiful condition. The following has been carried out: Completely sandblasted and professionally repainted Electrical installation completely renewed New starter motor New alternator New battery New hydraulic pump and valves New hydraulic lines tractor&front loader New convertible roof Equipped with good tires all around New solid seat This International is not only tec ...

2x Kango Type 900 electric breaker / demolition hammer Quantity: 2 pieces Brand: Kango Type: 900 Product Type: Electric Breaker / Demolition Hammer Technical data per machine: - Power: 900 W / 0.9 kW - Supply voltage: 220 V - Frequency: 25–60 Hz - Current: 4.3 A - Double insulated - 1x KEMA certification - Manufacturer: Kango Wolf Power Tools Ltd., London, England - Engine designation: M 0956 - Speed: 72 rpm Features: - 2x electric breaker - Robust metal housing - Double handles - Chisel holder - Electrical power cables - Various pointed and flat chisels - 2 metal Kango transport/storage cases - Other accessories as shown Application: suitable for heavy demolition and demolition work in concrete, stone, floors and masonry. Condition: - Used condition - Clear signs of wear and age - Cases show signs of wear and surface rust - Includes chisels and accessories as shown - Working on admiss ...

Manufacturer: Isuzu Model: D-Max Double Cab Registration date: 30.07.2012 Mileage 235000 Engine: 3.0 L Turbodiesel Intercooler Power: 100 kW (136 hp) Fuel: Diesel Transmission: Manual Drive: All-wheel drive (4WD) had TÜV until 07/2026 Permissible total weight: 3,500 kg Color: Silver Metallic Double cabin with 5 seats Hardtop on the loading area Trailer hitch available Loading area with plastic tub Scratches due to use and age as well as minor dents present Underbody with superficial rust attachments Hardtop with slight traces of corrosion Interior with usual signs of wear Robust work and utility vehicle Ideal for forestry, agriculture, construction or leisure Sale in used condition Technical function and completeness have not been checked Auction-ID: A1-51030-7

Hardwood interior door frame for flush doors, factory primed. Made from hardwood with a diameter of 56 x 90 mm. White grounded. Suitable for door widths from 630 to 930 mm and a maximum door height of 2115.5 mm. Delivery includes: 2 styles, 1 top rail and 1 stellat. Auction-ID: A1-45120-2185

Batch of various electric hand tools – approx. 22 pieces Product type: batch of professional electric hand tools Quantity: approximately 22 pieces Condition: working seen on admission Party consisting of, among others: - Bosch impact drill - Metabo impact drill - 2x DeWalt impact drill - Milwaukee impact drill - Bosch impact drill - Black & Decker Mouse sander - Black & Decker sander - Agojama angle grinder - 2x Makita angle grinder - Bosch angle grinder - Makita circular saw - Makita planer - DeWalt planer - AEG planer - Dremel 3000 multi-tool - Makita sander - Metabo heat gun - AEG grinding machine - Various other electric hand tools and accessories as shown Brands including: Makita, DeWalt, Bosch, Metabo, Milwaukee, AEG, Black & Decker, Dremel and Agojama. Features: - Various machines with storage/transport case - Electrical power cables - Various grinding, sanding, drilling and saw ...

INKJET Manufacturer: DOMINO Model: A-SERIES PLUS Type: A300+ Serial Number: W3A07679 Overall Dimensions (W x D x H): 660 x 660 x 1550 Equipment weight: 70 Kg Ink reference: IR-803BK-V2 Make-up reference : MC-803BK-V2 Lack of fan for ventilation Auction-ID: A1-51057-32

Manufacturer: Gustav Josting Maschinenfabrik Type: PFS 2100 Machine No.: 9107 Machine Type: Veneer Shear/Veneer Punch Working width: 2,100 mm Drive: electric Pneumatics: Compressed air maintenance unit with pressure gauge available Operation: electric controls Accessories: Spare punching knife / spare knife available Auction-ID: A1-50373-8009

Used VOUMARD 6A grinding machine Maximum diameter to grind: 300mm Diameter of the workpiece plate: 400 mm Maximum table stroke: 600 mm Table speed: 10000 mm/min Spindle diameter: 120 mm Spindle speed: 20000 RPM Grinding depth: 350 mm Equipped with 1 Grinding machine Dimensions and weight 2600x2000xH2000mm - weight 4500 kg + 1 pallet europe weight 250 kg Auction-ID: A1-50950-79

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length s ...

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws, stepped top jaws, top jaws -Manufacturer: Schunk, hard stepped jaws, 1 set = 3 pieces -Type: SZKA 213 Jaw width 30 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 70/90/H50 mm -Weight: 1.4 kg

Servo-hydraulic testing machine from Schenck/Instron with control unit Instron Fast Track 8800 and oven option from Instron. Of course, the furnace control unit from Instron is also included. In addition, various data carriers from Instron come with the control software: CD1: RS Labsite V2.3; CD2: Instron 8800 Firmware V07.89.00 Upgrade Disk; CD3: RS Console V7.19). A PC does not come with it for data protection reasons. Also included is the breakout box for all the plug connections and the extensive documentation in several folders. The oven was retrofitted in 2009 and is still as good as new. - Servo-hydraulic testing machine, PPE - Machine for dynamic and static tensile / compression testing of materials and components - max. static tensile force: less than 80 kN, max. dynamic force: 80% of the nominal force, max. piston travel: 100mm, frequencies: 0 to 20 Hz possible - ZD_Kegel ...

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C; ; Model: KB115 refrigerated and ventilated; Capacity: 115 liters; Temperature range: -5°C to 100°C; Interior glass door; Built-in digital temperature display; 2 shelves; Cable routing: Ø 30 mm (on the right wall); Power supply: 230 V; Frequency: 50-60 Hz; Power: 460 W; Internal dimensions: 60 x 40 x 48 cm; Overall dimensions: 83 x 70 x 101 cm; Weight: 106 kg; ; Year of manufacture: 2010; Tested at 37°C and -2°C; ; Internal reference: FA-2034; Auction-ID: A1-50994-1092

- 3 x trolleys: overall dimensions 3000 x 700 x 2150 mm each, usable dimensions approx. 2500 x 700 x 1800 mm, 6 swivel castors - Operating conditions: unchecked. - Dimensions for transport approx. 3000 x 2100 x 2150 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-137

Key data: 4300 , 1645 , 80

NEGRI BOSSI 430 T, model 4300H-2920 Year: 2019 Clamping force: 430 T Injection volume: 1810 cm³ Injection capacity: 1645 g (PS) Screw diameter: 80 mm Injection pressure: 1615 bar Mold thickness (min/max): 250 – 800 mm Opening stroke: 730 mm Distance between tie bars (H x V): 760 x 680 mm Platen dimensions: 1135 x 1060 mm Machine dimensions: 9340 x 2150 x 2315 mm Weight: 16,500 kg

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C; ; Model: KB115 refrigerated and ventilated; Capacity: 115 liters; Temperature range: -5°C to 100°C; Interior glass door; Built-in digital temperature display; 2 shelves; Cable routing: Ø 30 mm (on the right wall); Power supply: 230 V; Frequency: 50-60 Hz; Power: 460 W; Internal dimensions: 60 x 40 x 48 cm; Overall dimensions: 83 x 70 x 101 cm; Weight: 106 kg; ; Year of manufacture: 2003; Tested at 37°C and -2°C; ; Internal reference: FA-2021; Auction-ID: A1-50994-1091

ENGEL - 1100 T type ES 16050/1100 DUO Clamping force: 1100 T Year: 1999 good condition Working hours: 85 000 Screw diameter: 150 mm Column diameter: 230 mm Injection volume : 10 955 cm³ Injection pressure: 1330 bar Ejection force: 215 N Opening stroke: 1800 mm Platen dimensions (H x W): 1150 mm x 1400 mm Heating capacity: 113 kW Total weight: 77 000 kg

Key data: 4200 , 70

DEMAG 420 T type 800-1450 Commande : NC4 Année : 2001 Force de fermeture : 420 T? Diamètre vis : 70 mm? Volume injectable : 1039 cm³? Pression d'injection : 1 450 bars Entre colonnes : 810 x 710 mm? Dimensions des plateaux : 1200 x 1100 mm? Épaisseur du moule min : 380 mm Quantité d’huile: 760 L Poids : 20 200 kg? Dimensions : 7,90 x 2,40 x 2,20 m

Set consisting of a salting tank; a smooth chrome plancha and a grooved plancha to be installed Brand: Rosinox Model: PLSN 20E CHR L/PT Year: 2010 Serial number: 48599 201 Power supply: Three-phase 3P+N+T (380-400V - 50Hz) Electrical power: 7.2 kW Dimensions (W x D x H): 1200 x 900 x 295 mm Weight: 321 kg Aesthetic aspect: Very satisfactory Used equipment sold as is, not refurbished and untested. Vesto reference: V4620 Auction-ID: A1-50906-10

Year of manufacture: 2020 Load capacity: 6 kg Serial Number: 1600-109598

Serial Number: 01335 Year of manufacture: 2011 Number of axles: 6 Max Load Capacity: 3kg Weight: 27 kg

WTW inoLab Oxi 7310 Benchtop Oximeter; ; With CELLOX 325 oxygen probe; ; OD Accuracy: ±0.5%; OD Concentration: 0.00 - 20.00 / 0 - 90 mg/L; Dissolved oxygen - saturation: 0.0 - 200.0 / 0 - 600% (±0.5%); Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa; Temperature range: 0.0...+50.0 °C; Temperature accuracy: ±0.1°C; Power supply: Universal power supply, 4×1.5V AA batteries or 4×1.2V NiMH rechargeable battery; Data Acquisition - Capacity: 500 in manual mode/5000 in automatic mode; ; In good condition; ; Internal reference: FA-2164; Auction-ID: A1-50994-1179

Model: UR-6-85-5-A Serial Number: 2011203044 Production Date: 2011 Weight: 17.8 kg Maximum Load Capacity: 5kg Country of production: Denmark

MILACRON Magna T MTs 275-1540 Injection Molding Machine: - Control ENDURA Touch - Power consumption 219 A - Plate spacing 1560 mm - Column spacing 660x660 mm - Shot weight 523-1530 g - Without dosing container and tools - Incl. SAR ELECTRONIC handling and MFT-TECHNIK sorting table SAR ELECTRONIC Handling: - Year of construction 2018 - Dimensions 6000x5000x3000 mm - Full protective cab with safety door and hand control panel - 1x KUKA KR 20 R 1810 6-axis robot with GIMATEC QC 90-A gripper adapter and 1x KUKA KR 6 R900 6-axis robot with GIMATEC QC 50-A gripper adapter - Marking laser with scanner and suction - Floor conveyor system with lifting unit - Base frame and transfer station, base frame with automatic screwdriver Auction-ID: A1-50373-20

STUART SI505 Incubator Shaker for Microplates; ; Orbital agitation, amplitude 1.5 mm; Stirring speed: 250 to 1250 RPM; for 4 microplates or 2 microtube holders; Temperature Range (°C): Ambient +7°C to 60°C; Temperature Resolution (°C): 0.1°C; Timer: min/sec, hour/min, day/hour; Speed control: digital regulation in 10 rpm increments; Platform dimensions (mm): 220 x 220; Internal dimensions L x W x H (mm): 307 x 300 x 190; External dimensions L x W x H (mm): 361 x 405 x 430; Heating power (W): 200; Power supply (V / Hz / W): 230 / 50 / 300; IP rating: 31; Weight (kg): 22.5; ; In excellent working condition; ; Internal reference: FA-2407; Auction-ID: A1-50994-1027

Model: UR5 Serial numbers: 2013211724 Production dates: 2013 Curb weight: 18.4 kg Maximum payload: 5 kg Robot reach (max reach): 850 mm Country of production: Denmark

Manufacturer: Jining Lihua Heavy Industry Machinery Co., Ltd. Model: T360 Year of construction: 2025 Serial number: LH202501080204 New and unused mini track loader Operating hours: 0 h 420 cc petrol engine Motor power: 8.7 kW Net weight: 560 kg Operating weight: 700 kg Compact design for working in confined spaces Hydraulic lift arm with front bucket Robust crawler undercarriage for high traction on different surfaces Several additional hydraulic connections available CE marking available Operation via joystick control Machine is in new condition Ready to use Auction-ID: A1-50372-8018

Model: UR5 Serial numbers: 2014217194 Production dates: 2012 Curb weight: 18.4 kg Maximum payload: 5 kg Robot reach (max reach): 850 mm Country of production: Denmark

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C; Model: KB115 Refrigerated & Ventilated - NEW GENERATION; Capacity: 115 liters; Temperature range: -5°C to 100°C; Interior glass door; Built-in digital temperature display; 2 shelves; Cable routing: Ø 30 mm (on the right wall); Power supply: 230 V; Frequency: 50-60 Hz; Power: 700 W; Internal dimensions: 60 x 40 x 48 cm; Overall dimensions: 83 x 70 x 101 cm; Weight: 125 kg; Year of manufacture: 2022; Tested at 37°C and -2°C; Internal reference: FA-2033 Auction-ID: A1-50994-1014

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Model: UR5 Serial Number: 2012206594 Production date: 2012 Curb weight: 17.8 kg Maximum payload: 5 kg Robot reach (max reach): 850 mm Country of production: Denmark

OHAUS ISHD23CDG refrigerated incubator with orbital agitation; ; OHAUS Agitator Incubator; ; Reference: ISHD23CDG; Year of manufacture: 2020; ; Movement: Orbital, 25 mm; Capacity: 22.7 kg at 125 rpm and 4.53 kg at 500 rpm; Temperature range: -15°C to 65°C; Uniformity: ± 0.5°C to 37°C; Speed range: 15 RPM to 500 RPM; Tray dimensions: 457 mm x 457 mm; Dimensions: 596 mm x 815 mm x 675 mm; Drive System: Triple Eccentric Brushless DC Motor; Internal dimensions (H x W x W): 432 mm x 523 mm x 629 mm; Net weight: 131.7 kg; Power supply: 220 V; Power consumption: 800 W; Safety certification: TÜV; Speed Accuracy: Above 100 RPM ± 1%, Below 100 RPM ± 1 RPM; Speed range: 15 to 500 rpm; Timer: 1 second to 160 hours; Housing: Aluminum; Operating Conditions: 15°C to 32°C, 80% RH, non-condensing; ; Internal reference: FA-2487; Auction-ID: A1-50994-1019

Used VOUMARD 5A grinding machine Spindle diameter: 90 mm Spindle speed: 3600 RPM Inter grinding diameter: 5 - 200 mm Grinding depth: 250 mm Max. length of workpieces to be grinded: 500 mm Tip height: 180 mm Number of turns of the workpiece spindle: 6 Workpiece headstock speed: 500 - 800 - 1000 RPM Headstock inclination: 90° Table stroke: 3 - 600 mm Table speed: 0.01 - 10 m/min Machine weight: approx. 2800 KG Dimensions and weight 2650x1400xH1950mm - weight 3000kg Auction-ID: A1-50950-78

Model: UR5 Serial Number: 2013211664 Production Date: 2013 Curb weight: 18.4 kg Maximum payload: 5 kg Robot reach (max reach): 850 mm Country of production: Denmark

Servo-Hydraulic Testing Machine Machine for dynamic and static tensile / compressive testing of materials and components Max. static and dynamic swelling load: ±100 kN Max. dynamically changing load: ±80 kN, max. piston travel: 100mm, frequencies: 0 to 20 Hz possible ZD_Kegelkopf, ZD_Kegelkopf_kurz6, ZD_Kegelkopf_kurz8, 4PB_Balken Integrated hydraulic power unit Control: Instron Fast Track 8800 100kN version Instruction manual included Enclosed disks: Console 8, WaveMatrix, National Instruments NI-488.2 (GPIB driver) With defect, cannot be started. Auction-ID: A1-51071-9

Number of working hours: 985 h Model: TX90 Year of manufacture: 2011 Reach: 1000mm Controls: CS8C Load capacity: 6 kg Repeatability: ±0.03mm Robot weight: 111 kg Axles: 6

Complete used SACMI line for plastic 28mm 1881 2 pieces CSD closures

MATERIAL TYPE: Inverter BRAND: "Fuji" MODEL: FRN3.7C1S-4A Location: F7 Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

Thermo Scientific 8000 WJ CO2 Incubator/Oven; ; Water Jacket Technology (WJ); ; Model 3429; Capacity: 184L; CO² range: 0 to 20%; CO² inlet pressure: 103.4 kPa.; CO₂ sensor: CT; Temperature range: +5°C UT to +50°C. ; HEPA filter inside.; Glazed interior door.; Aluminum control panel with digital display.; 4 stainless steel shelves; 1 container of water; External dimensions HxWxD: 100x66x60cm.; Internal dimensions HxWxD: 68.1 x 54.1 x 50.8 cm.; 230V 50/60Hz.; Net Weight: 120.2 kg; ; Equipment tested at 37°C with a CO2 level of 5%; ; In excellent working and aesthetic condition; Slight rust marks on the back of the outer shell (see photos); HEPA filters will need to be replaced; The equipment will be delivered with the water jackets emptied.; It is imperative to fill them in before you can use the equipment according to the manufacturer's recommendations; ; ...

consisting of: - Fiorini PHE K260 plate heat exchanger, year of construction 2005, s/n 051005S11892 - Rhoss ICAEB chiller - 3 stainless steel buffer tanks, with Siemens geared motor and control box with touch panel, all mounted on stainless steel frame - Lewa DA9 dosing device - Stainless steel heating tank, equipped with Fati electric heater, with stainless steel control box, mounted on stainless steel frame - Includes 7 different stainless steel liquid pumps - Complete with piping, gauges, valves up to the large stainless steel tanks - Includes 3 shut-off stations - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-12

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with NC-controlled spindles ----------------------------------------- The machine was in daily operation until September 2026, at which point it was professionally dismantled and placed into storage at our facility. Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) Pos. 1: Cross-cut saw ---------------------------- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut line > NC-controlled length stop, mounted on the tenoning table, positioning of the cross-cut saw is integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting ...

Complete line for plastic closures 1810/2 piece caps/28mm/3,1gr Including: Line 1 1810 CCM001C - year 2003, 32 cavities, no tooling TVC003A - year 2003, 6 cavities Line 2 1810 CCM003C - year 2006, 32 acvities TVC003B - year 2006, 6 cavities PMV224B - year 2003, 24 cavities BTA900B - year 2003, 9 cavities

Offer here a used bag in box filler from ÖTTEL, type EUROFÜLLER. Year of construction 2019 Performance: 3 litres to 360 bags/hour 5 liters to 300 bags/hour 10 litres to 240 bags/hour Filling / dosing via IDM Control panel • Application range for almost all liquids • Robust stainless steel construction • High-quality equipment (Siemens, Festo) • Good usability • Pre-selectable program types (CIP, pre-flow, production, maintenance) • Maintenance-friendly design with good accessibility • The machine complies with the EC Machinery Directive 2006/42/EC