tube in tube used for sale

Measuring range: from 50 to 100 mm Auction-ID: A7-49089-317

clamping force: 2.700 kN injection volume: 6.000 cm³ screw diameter: -- mm platen size: 560 x 630 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 2.700 kN - Platen size: 560 x 630 mm - Max. stroke: 550 mm (see data sheet) Injection unit: - Max. injection volume: 6,000 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 28,2 kW - Installed heating capacity: 49,9 kW - Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 1,860 kg Total weight approx.: 10.600 kg - For dime ...

clamping force: 4.500 kN injection volume: 3.300 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 3,300 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N - Motor power: 35,5 kW - Installed heating capacity: 73,9 kW - Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg Total weight approx.: 16.300 kg - For dimensions, see the installation data in the appe ...

clamping force: 4.500 kN injection volume: 5.600 cm³ screw diameter: 610 - 985 mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 610 - 985 mm (see data sheet) Injection unit: - Injection unit type: ADV - Max. injection volume: 5,600 cm³ - Injection pressure: 2200 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Pump capacity: 27 kW - Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.: 21,000 kg - For dimensions, see the installation data in the appendix The data for this ad w ...

If you are looking for a reliable and quick response contact for your spare parts, at Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, Alfa Laval Spare Parts, Tetra Pak Spare Parts, GEA Westfalia Spare Parts, GEA Tuchenhagen Spare Parts, GEA Hilge Spare Parts, GEA Niro Soavi Spare Parts, GEA Aseptomag Spare Parts, Fristam Spare Parts, Pentair Südmo Spare Parts, APV Gaulin Spare Parts, APV Rannie Spare Parts, SPX Spare Parts, Stephan Spare Parts, Karl Schnell Spare Parts, Benhil Spare Parts, Corrazza Spare Parts, Trepko Spare Parts, Ilpra Spare Parts, Grundfoss Spare Parts, Lowara Spare Parts, Arsopi Spare Parts, HST Spare Parts, Buschjost Spare Parts, Samson Spare Parts, Sumitomo S ...

Technical Data:, • Working width: min. 20 mmmax. 250 mm, • Winding diameter: max. 510 mm, • Core sizes: min. 1”max. 3” (up to 6” with adapter), • Air supply: 6 bar, • Web tension: 1–21 N, Equipment:, • Base frame with two servo motors, • 2 pneumatic winding shafts, • Web tension system via dancer roller, • Splice and defective label detection, • Splicing table, • Measuring roller, • Counter, • Operation via HMI touch screen with digital handwheel, Features:, • Bi-directional winding, • Inside & outside winding, • Winding tension control: diameter-dependent or independent, • Fully reproducible winding results, • Integrated job memory (recipe management), • Counters for labels, linear meters, and diameter, Performance Model Gepard 500, Speed: 500 m/min (depending on material and winding diameter), Web width: 250 mm, Idler rollers: approx. 80 mm ...

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008 Injection Molding Machine Ferromatik Basetec 85-493-520 BJ 2009 Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006 Injection moulding machine Ferromatik K 110s-2F BJ 1999 Injection moulding machine Ferromatik K 125s/2F BJ 1995 Injection moulding machine Ferromatik K 200s-2F -493 BJ 1999 Angel Priam Bito Leo Locative Hot runner regulator Gammaflux G 24 Conveyor belts Temperature control units Accessories Walther Couplings

Drilling and dowel insertion machine Gannomat model 280/284 with good equipment from first ownership: – Drill beam with 23 spindles, pitch 32 mm – 6 dowel insertion stations for Ø 8 mm, dowel length 25-50 mm – 1 pair of side stops – Stainless steel container for 5 kg of glue – Stainless steel container for 5 liters of water for rinsing – Fully automatic electronic control via foot valve with program selector switch – 5-stage glue quantity selector switch by means of time preselection by electronic control – Closed glue system with 6 bar glue pressure – Glue/water selector switch for flushing the glue system – Glue residue indicator indicator for glue container – Suction funnel Ø 100 mm – High pressure pump adjustable for glue pressure 6-24 bar – Mirror program electrically controlled – Special control 280-S2E for cycle time reduction � ...

NEGRI BOSSI V 160 - 610 CANBIO ?Année : 2001 Force de fermeture : 160T Volume injectable : 360 cm3? Capacité d’injection : 330 gr de PS? Diamètre de vis : 45 mm? Pression d’injection : 1700 bars ?Épaisseur moule mini/max  : 170 - 550 mm ?Course d’ouverture : 460 mm? Entre colonnes H-V :  510 × 450 mm Dimensions des plateaux : 780 x 730 mm? Commande : DIMI EL 2 Interface colorateur? Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 5,72 x 1,47 x 2,15 m Poids : 6150 kg

Paternoster Stacking Schiepe with Siemens PLC control Package dimensions: max. part length approx. 3000 mm (limited by roller conveyor) max. package depth approx. 1000 mm max. package height approx. 1700 mm Device for strip layers available but without strip layers Parts feed via a roller conveyor Parts are taken from a roller conveyor, with forks to the top and front, where it is formed in a position, which is then pushed onto a pallet.

Scheffer Indoor Crane System 500 kg For sale is a high-quality, fully functional indoor crane system (single-girder overhead crane) from the premium manufacturer Scheffer Krantechnik, equipped with first-class quality components from Demag. The system has a synchronous double hoist (tandem operation) with two independently movable Demag electric trolleys. This design is ideal for lifting long, bulky or heavy goods (such as profiles, pipes or plates) absolutely horizontally and safely at two points at the same time. Technical data for the load capacity & performance: Total lifting capacity of the system: 500 kg (0.5 tons) with simultaneous use of both hoists Load capacity per hoist: 250 kg individually Manufacturer's plate specification: 2 x 2 x 0.125 t (2 hoists in 2-strand operation with a base load of 125 kg each) Crane manufacturer: Scheffer Krantechnik (Leading ...

ABUS Indoor Crane 500 kg Description: For sale is a professional, free-standing light crane system from the market leader ABUS (HB-System model series) from 2008. The system is in a very well-maintained, clean condition, comes directly from ongoing operation and is perfect for workshops, locksmiths, automotive workshops or welding workplaces to move loads of up to 500 kg precisely and effortlessly. Technical data & details: Manufacturer crane & hoist: ABUS Kransysteme GmbH Model hoist: Original ABUS ABUCompact Electric Chain Hoist (Factory No. 05 08 0598 / 02) Load capacity: Max. 500 kg (official ABUS marking available on the bridge) Type: Free-standing stud work made of solid I-profile steel girders. No ceiling or wall mounting required! Construction: High-strength screw connections with large gusset plates and additional diagonal struts for maximum st ...

CONTROLS   CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT   heating method: induction DIMENSIONS / WEIGHTS   space requirements -left/right-: 8044 mm   space requirements -front/back-: 8046 mm   total height: 4000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 624 kVA Power Data: Mains connection power: 624 kVA Mains voltage: 400 V Rated current: 900 A Mains frequency: 50 Hz Transformer: Power: 560 kVA Voltage: 400 / 580 V Current: 809 / 558 A Frequency: 50 Hz Converter: Power: 552 kVA / 450 kW Voltage: 750 V Current: 667 A Frequency: 6 – 10 kHz Starting: Power: 50 kW Voltage: 400 V Current: 90 A Frequency: 50 Hz Auxiliary Equipment: Voltage: 400 V Current: 25 A Frequency: 50 Hz Control Voltage: Voltage: 230 / 24 V Current: 5 / 40 A Frequency: 50 Hz / DC Automation KUKA Roboter

The scope of delivery includes: 01x Grating floor, used Material colour: hot-dip galvanised Total depth: approx. 482 mm (bearing bar direction) Overall width: approx. 1,270 mm (crossbar direction) Bearing bar diameter: 20|1.80 mm Support: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight / piece: approx. 6.72 kg Note: - The shelf grating can cause damage, Have scratches, dents, welds. General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Key data: 3200 , 1035 , 70

NEGRI BOSSI 320 T type V320-2000CANBIO? Année : 2000 Force de fermeture : 320 T Diamètre vis : 70 mm Rapport L/D : 20 Volume d’injection : 1150 cm3? Capacité d’injection : 1035 gr de PS? Pression d’injection : 1700 bars ?Épaisseur moule mini/max  : 250/700 mm Entre colonnes H-V :  630-570 mm Dimensions des plateaux : 970 x 940 mm? Commande : DIMI EL 2 Interface colorateur Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 7,55 x 1,80 x 2,24 m Poids : 12 300 kg

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----------------------------------------- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturers Technical Description: ----------------------------------------- Item 1: Weinig Unicontrol 11 Window System ----------------------------------------- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw -------------------------------------------------------------- With laser alignment light, motor power: 3 kW, spindle diameter: 40 mm, electronically variable spindle speed with brake: 3,000–6,000 rpm. Ma ...

Features Volume 53800 L Material No. V2A Operating pressure 2 bar Working temperature 20 C Total height 10870 mm Diameter 3260 mm

Features Volume 47100 L Max. operating overpressure 2 bar Operating temperature 20 °C Weight 4020 kg Diameter 3000 mm Total height 10330 mm Outer diameter 3210 mm With insulation and heating/cooling jacket

BORCHE BH500 injection moulding machine was built in 2016 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of plastic components used in many industrial sectors and in everyday products. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This technology enables the rapid and precise production of repeatable components with complex geometries. The BORCHE BH500 has been designed for demanding mass production and intensive use. The machine is equipped, among others, with an 80 mm diameter screw and a precision mould clamping system with a force of 500 tonnes, which ensures a stable process. All operating parameters are programmed via the intuitive KEBA control system, which enables con ...

ARBURG ALLROUNDER 720S 3200-2100 injection moulding machine was built in 2008 in Germany by ARBURG GmbH + Co KG. The machine is designed for the efficient mass production of plastic components used across a wide range of industries. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. A 60 mm diameter screw and a precision mould clamping system with a clamping force of 320 tonnes ensure the process runs smoothly, guaranteeing high repeatability and quality of the parts produced. The ARBURG ALLROUNDER 720S 3200-2100 is offered with a comprehensive range of equipment that increases the level of automation of the production process. All process parameters are programmed in the intuitive SELOGICA control system, which ensures convenient ...

Key data: 38 liter, 25 liter

Werner & Pfleiderer Mixer Model GK12 Rotor type Tangential Total chamber volume 38 L Unable volume. 25 L Complete with motor Electrical control panel Chamber dims: 40x40x40cm = 0,064m3 Rubber used: EPDM, Natural EPDM, NR BR.

NEGRI BOSSI 55 T type V55-200 CANBIO? Force de fermeture : 55 T Diamètre vis : 28 mm Rapport L/D : 20 Volume d’injection : 92 cm3? Capacité d’injection : 84 gr de PS? Pression d’injection : 2100 bars? Épaisseur moule mini/max : 120/350 mm ?Entre colonnes H-V : 315 x 280 mm Dimensions des plateaux : 455 x 430 mm? Commande : DIMI EL 2 Interface colorateur ?Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 3,72 x 1,18 x 1,80 m Poids : 2000 kg

Manufacturer: Günther, Germany Model: Automatic injector, 16-needle Condition: Fully factory refurbished machine Warranty: 1 year warranty Services included: Delivery, installation, samples, staff training, certificates

Key data: 2000 , 50

KRAUSS MAFFEI 200 T type CX 200-750 Clamping force: 200 T Year: 2011 33 000 operating hours Screw diameter: 50 Injection volume: 393 cm3 Injection pressure: 1892 bars Tie-bar spacing: 560 x 560 mm Opening stroke : 700 mm Maximal distance between platen : 1050 mm Power install : 37 KW Dimensions : 5,20 x 2 x 2 m Weight : 11 500 kg

Key data: 3200 , 694 , 60

FERROMATIK MILACRON K 320-S injection molding machine Clamping force: 320T / 3200 KN Year: 1997 Screw diameter: 60 Injection weight : 694 gr Injection volume: 710 cm3 Injection pressure: 2144 bars Tie-bar spacing: 750 x 750 mm Weight : 18 800 kg

Key data: 1250 , 174 , 43

SANDRETTO serie 9 T 430/125 Clamping force : 125 T / 1250 KN Distance between tie bar : 475 x 475 mm Platen dimensions : 600 x 600 mm Mould thickness min / max : 150 - 480 mm Opening strocke : 470 mm Screw diameter : 43 mm Injectable volume : 274 cm3 Pressure on material : 1566 bars Weight : 6200kg

Features Volume 1821 L Material No. V2A Operating temperature 90 °C Total height 2200 mm Diameter 1300 mm Description Topsoil: Cone base 2 crane eyes Threaded nozzle DN25 central according to DIN 11851 for CIP ball Socket 1/2" Lid DN500 Cylinder: Insulation 5cm difusion-tight welded Level indicator with bar and scale 1/2" Connection DN50 according to DIN 11851 rear top Connection DN80 according to DIN 11851 right Connection DN50 according to DIN 11851 left DN50 bottom connection PT 100 rear Underbody: Sloping cone base central Residual drain DN50 according to DIN 11851 Heating coil in the bottom inside Flange connection 25 3 profile feet fixed

ENGEL DUO 500 T type 4550/500 pico Force de fermeture : 500 T / 5000 KN Année : 2013 Nombre d’heures : 48 000 h Diamètre vis. : 90 mm Volume injectable : 2480 cm3 Entre colonnes : 830 x 915 mm Dimensions des plateaux : 1270 x 1260 mm Epaisseur moule min/max : 350/900 mm Ecart maximal entre plateaux : 1650 mm Dimensions : 7,80 x 2,40 x 2,36 m Poids : 14 T + 7 T

Specification Injection Molding Machine Demag Systec 210/580-840 (Servo) General data Clamping force: 210 t Year of Make: 2019 Control: NC5 / MC5 Clamping unit Size of the clamping plates: 860 x 860 mm Lights spar spacing: 580 x 580 mm Opening travel: 790 mm Ejector travel: 180 mm Injection unit Screw diameter: 60 mm Injection volume: 636 cc Injection weight in hp: 579 g Spec. Spray pressure: 1352 bar L/D Screw Ratio: 20 Facilities Pump drive power: 26.0 kW Servo motor drive Bimetal, wear-resistant screw Flexible clamping unit with multiple ejector and core movements Ejector with position control Injection with control pump (p+v-controlled, closed loop) Pressure return system (RSP), 3-part Reinforced oil cooling system (supply up to 35 °C) Location: Aachen, Germany

Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type of Injector / Cutter Height 1950 mm Width 1000 mm Length 2200 mm Electrical Supply: 400V 50Hz 3N Total power 4.5 kW Main Material Stainless Steel, Acid Resistant Number of needles 61 pcs. Number of heads Single head Working belt width 440 mm Belt feed adjustment Yes Injection pressure adjustment Yes Tape type made of acid-resistant steel

Key data: 800 kN, 100 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: ENGEL Type: VICTORY 330/80 TECH Year of Make: 2012 Clamping force: 80 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 110 ccm³ Moulded part weight 100 g/hp Control: CC200 Equipment: -Robot, manufacturer: SEPRO, type: AXESS -2 x Core Pulls -Blow-out valve -Conveyor belt -Security fence

Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany

Specification Injection Moulding Machine Demag Extra 35-80 General data Clamping force: 35 t Year of Make: 2007 Control: NC4 / MC4 Clamping unit Size of the clamping plates: 390 x 390 mm Lights spar spacing: 280 x 280 mm Ejector force: 26 kN Ejector travel: 100 mm Injection unit Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Spray volume: 42 cc Injection weight in hp: 37 g L/D Screw Ratio: 20 Machine weight: approx. 2,200 kg Equipment: hydraulic core pull, pneumatic valve Location: Aachen, Germany

Specification Injection Molding Machine Ferromatik (Milacron) Magna T Servo 110-450 General data Clamping force: 110 t Year of Make: 2017 Drive: Servo Clamping unit Lights spar spacing: 435 x 435 mm Tool installation height: min. 150 / max. 480 mm Opening travel: 350 mm Max. plate spacing: 830 mm Injection unit: 450 Screw diameter: 40 mm Location: Aachen, Germany

Specification Injection Molding Machine Ferromatik Milacron Magna T150 General data Clamping force: 150 t Year of Make: 2016 Clamping unit Clearance spar spacing: 510 x 510 mm Max. plate spacing: 950 mm Injection unit: 630 Screw diameter: 45 mm Location: Aachen, Germany

Empty bottle inspector for checking the side walls and mouth, as well as for residual liquid and metallic foreign objects. The bottle height is inspected before the bottle reaches the inspector, and non-conforming bottles are rejected., Additional title: Inspection of glass bottles prior to filling, Operating hours: 6662, Capacity filling line: 44000 bo/h capacity at the filler, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: in floor-standing housing on feet, Features: height inspection; bottle transport; housing; control panel

Fanuc - 2015 Bosch - 2016 2016FANUC LR Mate 200iD/7LA05B-1142-B30127 kgFANUC System R-30iB MateOpConIncluded3,800 hBosch APAS assistant i6, mobilePneumatic gripper, custom designFestoProtective covers and mounting frame (APAS-specific)1/N/PE 230 V AC 50 Hz24 V DC3.5 A / 10 kA3 x 2.5 mm216 A gGIP52

Inverters Part Number: ACS800-704LC-1370-7 Manufacturer: ABB The part is technically in good condition, but this is a used item that shows or may show signs of wear. Internal numbers: 397695573779 622 060 257398512065 622 059

Investor Hugo Beck TA 3315; Condition as is; unchecked; is sold as a spare parts carrier. Feeder Hugo Beck TA 3315; condition as is; only for spare parts.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Interface module: 48-pin -Circuit board: Type P7127J 536/1 -Number: 3 modules available -Price: per piece -Dimensions: 150/70/H65 mm -Weight: 0.2 kg/pc.

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

voltage: 230 V : 200N dimension of workpiece: mm index-arm vert. adjustable: xx mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 150 mm grinding depth: 200 mm stroke of the table: 425 mm bore: 80 mm spindle speed:: 17000 U / min workpiece turning speeds: 125/176/246/350 U/min max. swing dia.: 250 / 420 mm total power requirement: 2,2 / 0,5 / 0,9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,40 x 1,20 x 1,45 m Internal grinding diameter: 150 mm Max. grinding depth: 200 mm Table travel: 425 mm Bore diameter: 80 mm Grinding spindle speed: 17,000 rpm Workpiece speeds: 125 / 176 / 246 / 350 rpm Swing diameter: 250 / 420 mm Total power requirement: 2.2 / 0.5 / 0.9 kW Machine weight: approx. 2 t Space requirement (L × W × H): approx. 2.40 × 1.20 × 1.45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding depth: 500 mm internal diameter: 20... 400 mm work piece spindle speed: 40400 U/min table speeds: 0,18 m/min rapid traverse: 10 m/min total power requirement: 17 kW weight of the machine ca.: 6,5 t grinding diameter: innen / internal 20..400 mm / external 500 mm max. diameter of work piece: 500 mm max. grinding length: 315 mm cone grinding: 60 ° power drive of internal grinding motor: 7,5 kW rev’s of internal grinding spindle: 2640...16500 U/min power drive of face grinding attachment: 4 kW power drive of workpiece motor: 1,5 kW rev’s of work piece spindle: 40...400 U/min steplessly variable table traverse speeds: 0,1...8 m / min rapid movement of table: 10 m / min stroke table 630 mm max. distance between work piece spindle flange and grinding spindle: 1250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium

Inverters Model No.: ACS800-104LC-0700-7 +E205 Manufacturer: ABB The part is technically in good condition, but this is a used item that shows or may show signs of wear. Internal number: 622 056 257398513187 622 055 257398515598

TOS BDU 250A Internal and Face Grinder Machine Max. diameter of grinded hole: 250 mm Max. depth of grinding: 250 mm Max. workpiece diameter: 400 mm Max. swing: 470 mm Max. weight of workpiece: 100 kg Max. length of workpiece: 1000 mm Equipped with Face Attachment Total input: 9 kVA Machine weight : 3600 kg

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 40/50 mm Weinig Unicontrol 6 -------------------------------------------- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw -------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ------------------------------------------- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle -------------------------------------------- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood ...