tube filling used for sale

This 3-axis BLM Adige LT9 Combo Fiber 3kW was manufactured in 2012. It features a maximum raw material length of 6,500 mm and can process round tubes with a diameter of up to 225 mm. The machine is equipped with a powerful 3 kW fiber laser, ideal for cutting tubes, profiles, and sheet metal. If you are looking to get high-quality cutting capabilities, consider the BLM Adige LT9 Combo Fiber 3kW machine we have for sale. Contact us for further details.

tube diameter: . mm wall strength: . mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 95 mm Shaft diameter: 30 mm Shaft revolutions: 7 U/min roll diameter: 132 mm Drive: 0,75 kW weight: 220 kg range L-W-H: 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round material: 40 mm tube diameter: 70x2 mm square material: 80x30x3 mm L-beam: 50 x 5 mm I - beam section - flat steel: 80 x 16 mm I-beam section - upend: 50 x 15 mm roll diameter: 157 mm Shaft diameter: 50 mm bending speed: 2,95 m/min total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 80 mm roll diameter: 260 mm : 7 U/min : 170 mm : 27 kN : 160 mm : 450 mm total power requirement: 3,7 kW dimensions: 980x1430x1600 mm weight: 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 : 210 ° bending speed: 2 U/min : 1 1/4 x 3,5 mm : einphasig - 230 V drive motor: 1,1 kW : < 70 dB weight of the machine ca.: 80 kg dimensions of the machine ca.: 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 48x3,5 mm : 48x2,5 mm : 32 mm : 64x2 mm bending speed: 2 U/min : R10-R300 total power requirement: 1,5 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material - diameter: Ø 35 mm I-beam section - flat steel: 60x10 mm L-beam: 50 mm tube diameter max.: Ø 60x2 mm square material: 45x45x3 mm roll diam. toproll: 162 mm roll diam. bottom roll: 152 mm Shaft diameter: 50/40 mm turning speeds: 3,3 m/min total power requirement: 1,5 + 0,75 kW weight: 450 kg range L-W-H: 1050x950x1450 mm Domestic equipments: - hydr. Delivery of the top roller - standard roller set - side straightening rollers - Upper roll holder: 50.0 mm - Under roller diameter: 40.0 mm - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW range L-W-H: 1100x850x1350 mm weight: 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L-beam: 50x5 mm square material: 50x40x3 mm I - beam section - flat steel: 120x15 mm I-beam section - upend: 60x10 mm round material: Ø 35 mm tube diameter: Ø 70x2 mm roll diameter: 155 mm bending speed: 4,3 m/min bore: 50 mm total power requirement: 1,5 kW weight: 400 kg dimensions: 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - flat steel: 80x20 (d1200) mm I-beam section - upend: 80x25 (d2100) mm L-beam: 50x50x6 (d1000) mm bar material - diameter: 40 (d800) mm square material: 60x60x3 (d4000) mm rectangle: 80x30x3 (d6000) mm tube diameter max.: 70x2 (d1600) mm tool adaptor: 60 mm roll diameter: 177 mm bending speed: 6,4 m/min total power requirement: 4 kW machine weight ab.: 970 kg Overall size: 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW range L-W-H: 900 x 600 x 1000 mm weight: 470 kg connected load: 400/50 V/Hz Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shaft diameter: 60 mm Shaft revolutions: 6 U/min roll diameter: 215 mm pressure hydraulic cylinder: 180 kN dimensions: 1125x870x1620 mm weight: 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 495 kg range L-W-H: 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 63x4,2 mm external diameter: min. Ø 5 mm bending radius min.: 10 mm bending radius max.: 270 mm Bending Angle: max. 210 ° bending device: gegen Uhrzeigersinn total power requirement: 0,75 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 740x470x1030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 215 mm shaft diameter: 60 mm Shaft revolutions: 6 U/min : 100x2 mm : 80x15 mm pressure hydraulic cylinder: 180 kN total power requirement: 2,2 kW weight: 720 kg dimensions: 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm : 60x2,5 mm : 35 mm : 64x4 mm : R10-R300 bending speed: 2 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 76-86 mm Shaft diameter: 20 mm Shaft revolutions: 11 U/min Bending capacity round tube: 30 mm : 25x6 mm Angle iron: 20x20x4 mm Drive: 0,18 kW range L-W-H: 530x420x500 mm weight: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indexing tube without man 40/54 tap MAN Part Number: 419.01.004

I-beam section - upend: 100 x 20 (d 2100) mm tube diameter max.: 100 x 3 (d 3000) mm L-beam: 80 x 80 x 8 (d 2000) mm square material: 50 x 25 x 2 (d 600) mm bar material - diameter: 60,0 (d 1000) mm I-beam section - flat steel: 120 x 30 (d 600) max. 140 mm tool taper: 80,0 turning speeds: 4,2 U/min weight: 1600 kg dimensions: 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according  ...

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

Unbek. Type, YOC ca. 1990, Revision 2002 Specifications: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle left + right selectable - Hydr. Double-sided bending function - Hydr. Delivery ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. Voltage - Bending tools

CRIPPA CNC YEAR 2007 LOW WORKING HOURS INCLUDED TOOLINGS AND EQUIPMENT WE ORGANIZE FOR CLIENT AS WELL TRANSPORT

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock# UG6359 Little used automatic tube filling machine by Pablo (PL) model TB-250. Machine can work on filling plastic tubes (PE/PP). Dose range from 5 - 250 ml. Machine can run on tubes with diameters: 19, 25, 30, 35, 40, 50 mm. Height of tubes in range from 10 up to 210 mm. Working output depends on product and size of tube. For tubes with diameter 25-30 mm - in range from 3000 - 5000 pcs/h. Power consumption 7 kW, 3/400 V, 50/60 hz. Compressed air 6 bar. Cooling water connection dia 10 mm, outlet diameter 8 mm. Machine new 2020. Shipping dims: 1991 mm x 1441 mm x h 2300 mm/2600 mm (with pole) x weight 800 kg.

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36

Unused ultrasonic sealer for plastic tubes. Power supply (V/Hz) 230/50 Operating frequency (kHz) 20 Sealing width (mm) 80 Power (W) 1500 Size of work surface (mm) 300 x 325 Dimensions of device (mm) 1100 x 650 x 530 Weight of device (kg) 75 Horizontal ultrasonic sealling machine for tubes of thermoplastics (PP, PC, PU, PA, PBT, PES, PVC, PM, etc.) with adjustable: welding time, sonotrode descent speed, welding pressure, welding depth, number (count) of welded tubes. The heat needed for ultrasonic welding is obtained by vibration of material particles.

Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Stepped end tuber type 951, Gartemann + Hollmann, Year 1980, 4 plies, 2 colours, photo cell, Tube width 30-65 cm, Tube length 50-121 cm, Machine mechanically and electrically mounted, we also have a 4 colour tail end printer suitable for that machine

From business liquidation: Grit GX 75 H Radius Grinder Year of construction 2016 Dpbnjr 380 volts 2KW power with 31.5--40--46mm inserts mobile

: 60x3 mm : 60x3 mm : 35 mm : 64x4 mm : max. 210 ° : R10-R300 bending speed: 1,25/2,5 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube heaters Manufacturer: Ahrens & Bode Pressure-resistant up to 25 bar

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot Air Axial Fan, Axial Tubular Fan ASTO, JULIUS SÖHNLE AH03 450 0.77 m3/s up to 600°C (motor thermal, insulated with cooling air from outside) speed: 1375 rpm motor : 0.25 kW 380 / 660 V Inner diameter: Ø 450 mm New ! Dimensions: 500 x 600 x 520 mm

Alu Plug-in Tube FRÄNKISCHE ROHRWERKE ES Type 32 3000 x 32 mm VDE 0605, DIN EN 50086-1, DIN EN 50086-2-1, Classification: 4456 CE 3030512 3 packages of 30 m New !' Dimensions: 3000 x 500 x 100 mm

Steel tubes ST 37 galvanized, thick-walled, 5 mm material thickness, Diameter = 57 mm, Length = 3360 mm Unused, partly slight flash rust, slightly dirty, photos are older. Price for individual purchase, quantity discount possible from 25 pcs., approx. 150 pcs. available.

Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight

Format: 16 x 33 x 0.8 mm Model MHUD-PET 2500 Pieces / Box 3 boxes in stock

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

Magazine Tubes MHUD 13 x 33 x 0.6 mm for PP strapping 2500 Pieces / Box 14 boxes in stock

Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools

tube diameter: 4-20 mm wall strength: 2 mm bending radius min.: 10 mm bending radius max.: 75 mm bending speed: 35 mm/min pull up length of tube: 2000 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 1,1 t dimensions: ca. 3100x1000x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 12-54 mm (Kupfer / Edels. mm serial number: EBD 022 99 002 mode of operation: Schneiden/ Entgraden / Re speed: Rollen 450 U/min m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15