tube filling used for sale

Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details.

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - .ucymachines/ Contact us at - sales@ucymachines

Stock number: A202, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tube heat exchanger, Construction: Lying on legs, Amount of tubes: 127 pcs. , Product tube diameter: Ø 1, Heating surface: App. 20 m²

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026.

Stock number: A212, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Amount of tubes: 27 pcs., Product tube diameter: Ø 1, Insulated: Yes, Heating surface: 4,03 m², Inner dimensioner: L 1900 x W 300 mm., Outer dimensioner: L 2050 x W 400 mm.

Type of Machine : VORTEX MIXER W/ STDTUBE HEAD 230V , TESTED TO IEC 61010-1, 230V. 50Hz. 0.3A Quantity : 1 unit Year of construction : 3/15/2022 PLEASE CONTACT JESCICA TAN : 012-6062305 ( MALAYSIA NUMBER) Located at Factory F33

Offer 26174 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours read 972 h -with - Digital bending angle display + bending angle fine adjustment - With control SIEMENS SIMATEC Touch Panel - Mandrel bending device 4.5 m. with hydr. Withdrawal - Sawing unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels - 6 ,8 , 10 , 12 , 16 , 20 , 22 , 28 , 30 mm , - Partly possibly incomplete

Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details.

This 7-axis Mazak 3D Fabri Gear 150 was manufactured in 2005. It features an impressive X-axis travel of 8750 mm, Y-axis travel of 1270 mm, and Z-axis travel of 375 mm. The machine is equipped with a powerful 2.5 kW resonator, providing efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the Mazak 3D Fabri Gear 150 machine we have for sale. Contact us for further details.

Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspec ...

CONTROLS   CNC controls BLM VGP 3D TECHNICAL SPECIFICATION   Max. diameter of tube: 40 mm   Max. wall thickness: 2 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 4500 mm   space requirements -front/back-: 2150 mm   total height: 1800 mm   total weight approx.: 4800 kg Loadingstation AL42 max. 2300 mm, min. 500 mm, 150 kg

Tube heaters Manufacturer: Ahrens & Bode Pressure-resistant up to 25 bar

ERCOLINA MB 42 / Mandrel tube bending machine -CE - Identifier -Year of construction 2009 -Bending capacity / steel tube 42.4x3mm -Max. tube diameter aluminum / copper 54x2mm -Bending performance furniture construction tube 48x1.5mm -Solid material up to 30mm -Max. bending angle 210 degrees -Electronic control with digital display -Max. 30 x program memory -Programs with 9 x bends - Overload Protection / Yes - Operation: Double foot pedal ( bend - return) -Max. bending speed 2rpm -Incl. 1x tool -1.1 KW -Footswitch -Documentation Dimensions: LxWxH 0.5x0.6x1.2 meters / Weight 100Kg

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

2 tube end forming machines Auction-ID: A7-49229-91

: neu : 2026 : 090209 : prompt, Zwischenverkauf v : Italien : 7780 € : 150.15 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 33,7 x 3,4 GAS mm tube diameter: 35,0 x 2,5 STAHL mm tube diameter: 35,0 x 1,5 EDELST mm bending radius min.: R10 - R 190 mm bending angle max.: 0 - 180 ° tool taper: 6-kant 40 mm voltage: 230 V total power requirement: 0,9 kW weight of the machine ca.: 23,0 kg Description: - MediBender 070 digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 42.0 x 3.0 STAHL mm tube diameter: 30.0 x 2.0 EDELST mm bending angle max.: 180 ° bending radius max.: 100 mm bending speed: 2.0 U/min. Control: NC voltage: 400 V total power requirement: 0.55 kW weight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu bar material - diameter: 30.0 mm wall strength: 2.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS  ...

tube diameter: 273 mm wall strength: 15,1 mm bending radius min.: 150 mm bending radius max.: 1250 mm total power requirement: 30 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft diameter: 40 mm bending speed: 10 U/min : 2 x 3,2 bending capacity - angular iron: 50 x 50 x 6 mm total power requirement: 1,85 kW weight of the machine ca.: 280 kg dimensions of the machine ca.: 560 x 980 x 1430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm : 60x3 mm : 35 mm : 64x4 mm : max. 210 ° : R10-R300 bending speed: 1,25/2,5 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 bending speed: 2,5 U/min : 54,0 x 2 mm Sheet thickness aluminum: 54,0 x 2 mm : 42,4 x 3 mm sheet thickness for stainless steel: 42,4 x 2 mm : 30 mm : einphasig - 230 V drive motor: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 363 x 900 x 595 mm ‘ERCOLINA MEDI BENDER’ Single-phase mandrel-less bending machine up to 42 mm Features: - Control system: Soft-touch control panel in 8 different languages - Number of programs: 30, each with 9 bends - Standard accessories (including foot switch, user manual) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included Additional  ...

tube diameter: 60.3 x 4.5 mm ST tube diameter: 60.3 x 5.4 mm ALU tube diameter: 2 x 3.91 mm GAS bar material - diameter: 35.0 mm revolutions per minute: 2.0 U/min bending radius min.: 10.0 mm bending radius max.: 270 mm external diameter: min. 5.0 mm external diameter: min. 1/8 Zoll voltage: 230 V total power requirement: 1.5 kW weight: 76.0 kg range L-W-H: 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model M = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 1400 / 2800 U/min tube diameter: 40 - 140 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request - Machine video - identical machine - https://www.youtube.com/watch?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal  ...

tube diameter: 16.0 - 90.0 mm width of the strips: 100 mm band length: 1250 mm grinding band dimension: 100 x 1250 mm total power requirement: 2.2 kW weight of the machine ca.: 180 kg. range L-W-H: 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use () New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport The  ...

CONTROLS   CNC controls BLM VGP 3D TECHNICAL SPECIFICATION   Max. diameter of tube: 28 mm   Max. wall thickness: 1.5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 3400 mm   space requirements -front/back-: 1100 mm   total height: 1500 mm   total weight approx.: 1850 kg Stainless steel max. 20 mm diameter CNC control with VGP 3D software

CONTROLS   PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE   external diameter min.: 8 mm   external diameter max.: 90 mm Round tube min. 8 mm            max. 90 mm Square tube min. 8x8 mm             max. 80x80 mm Rectangular tube min. 15x10 mm                  max. 60x85 mm

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 € : 216.96 € : 5 kW : 265 kg : 10-114 mm : 2 : 3-22 m/s : (2x) 50 x 940 mm to grind and polish for round and oval tubes opening of sanding belts by footpedal machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube: 6000 mm tube diameter: 42 x 3,0 mm wall strength: 3,0 mm bending radius min.: 150 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 7500 x 1.400 x 1.300 m Round steel tube: up to Ø 42 × 3.0 mm Round stainless steel tube: up to Ø 42 × 2.0 mm Square tube: 25 × 2.5 mm Max. section modulus: 4.1 cm³ Bending angle: up to 180° + 10° overbending Bending time at 90°: 2.7 sec. (forward stroke) Longitudinal feed speed: 450 mm / 1.5 sec. Rotary positioning speed at 90°: 1.0 sec. Repeatability of bending axis: ± 0.2° Controlled length tolerance: ± 0.3 mm Controlled rotation tolerance: ± 0.2° Tube loading length / usable length for mandrel bending: 4,100 mm Max. radius range: 150 mm Bending height: 850 mm Free-standing bending head: 850 mm long Bending axis drive: electro-hydraulic Rotation and length positioning: automatic via gear ...

2x boxes; Blue tube for air and brake fluid; New; Auction-ID: A1-49242-80

PRODUCT (PROFILE, TUBE)   external diameter min.: 25 mm   external diameter max.: 76 mm   wall thickness min.: 0.7 mm   wall thickness max.: 3.25 mm LINE CHARACTERISTICS   welding process: HF inductive   sawing process: travelling   speed max.: 100 m/min ELECTRICAL SPECIFICATIONS   mains power supply: 680 kVA Technical data & highlights: System length: approx. 130 m Staff requirements: 6 employees for operation Welding process: High-frequency welding up to 400 kHz Induction welding process: Power up to 250 kW Advantages: Robust and reliable design – suitable for continuous industrial operation Precise welding quality thanks to state-of-the-art high-frequency technology Ideal for manufacturing pipes in various dimensions -Pipe welding machine: Abbey Etna -Strip processing + saw VAi Seuthe -Rolling mill Carl Wetzel -Induction welding system: Rittal SK3215.100, built in 2 ...

FEEDSTOCK TUBE   external diameter max.: 90 mm   lenght max.: 14000 mm CHARACTERISTICS DRAWING MACHINE   force: 250 kN   number of parallel trains / strands max.: 3 For Sale: High-Performance Triple Drawing Bench GKZ 250 / 3-19R – Precision, Power & Reliability Offered for sale is a Triple Drawing Bench, type GKZ 250 / 3-19R, manufactured by Bültmann Maschinenbau GmbH & Co. KG, a renowned German company known for high-quality tube drawing technology. This system stands out for its robust design, impressive pulling force, and flexible adaptability for a wide range of tube dimensions and materials. Technical Data Year of Manufacture: 1987 Manufacturer: Bültmann Maschinenbau GmbH & Co. KG Location: Hall 7 / 8 Floor Space: 6 x 35.5 m = 213 m² Installed Power: 355 kW Operating Personnel: 1 person Performance Specifications Number of Tubes per Draw: 1, 2 or 3 Input Tube Outer Di ...

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Quantity per package 100 pieces Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 74 mm² Inner diameter 16.8 mm Outer Diameter 20 mm Product Weight 0.005 kg SET OF 1 BOX OF 100 PIECES. Auction-ID: A1-49412-145

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 43 mm² Inner diameter 12.8 mm Outer Diameter 16 mm Product Weight 0.004 kg 1 LOT: 100 PIECES Auction-ID: A1-49412-135

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Quantity per package 100 pieces Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 74 mm² Inner diameter 16.8 mm Outer Diameter 20 mm Product Weight 0.005 kg SET OF 1 BOX OF 100 PIECES. Auction-ID: A1-49412-146

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Quantity per package 100 pieces Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 74 mm² Inner diameter 16.8 mm Outer Diameter 20 mm Product Weight 0.005 kg SET OF 1 BOX OF 100 PIECES. Auction-ID: A1-49412-142

Tube elbow GT 3321 - PVC - Ø20 mm - Grey - IP40 Schneider Electric IMT43320: 90° Wide Radius Elbow for IRL 3321 Tube - Diameter 20 mm - Grey Color For use with Mureva IRL 3321 rigid ducts Benefits and applications: Non-flame propagator Perfect resistance of the products in the presence of many chemical agents, acids, alkalis and mineral salts Excellent resistance to weather and weather weathering. Sold by 50 pieces Auction-ID: A1-49412-158

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 43 mm² Inner diameter 12.8 mm Outer Diameter 16 mm Product Weight 0.004 kg 1 LOT: 100 PIECES Auction-ID: A1-49412-133

Can be used for SANDEN snack vending machines Auction-ID: A1-49450-37

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 43 mm² Inner diameter 12.8 mm Outer Diameter 16 mm Product Weight 0.004 kg 1 LOT: 100 PIECES Auction-ID: A1-49412-132

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Quantity per package 100 pieces Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 74 mm² Inner diameter 16.8 mm Outer Diameter 20 mm Product Weight 0.005 kg SET OF 1 BOX OF 100 PIECES. Auction-ID: A1-49412-144

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 43 mm² Inner diameter 12.8 mm Outer Diameter 16 mm Product Weight 0.004 kg 1 LOT: 100 PIECES Auction-ID: A1-49412-134

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Quantity per package 100 pieces Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 74 mm² Inner diameter 16.8 mm Outer Diameter 20 mm Product Weight 0.005 kg SET OF 1 BOX OF 100 PIECES. Auction-ID: A1-49412-143

Product Range Mureva TUBE Product Type Sleeve Color Grey (RAL 7035) Terms of Use Indoor/outdoor Product Destination Conduit Mureva Tube Material PP (polypropylene) Crush resistance 750 N/m Nominal cross-section 43 mm² Inner diameter 12.8 mm Outer Diameter 16 mm Product Weight 0.004 kg 1 LOT: 100 PIECES Auction-ID: A1-49412-136