tube cutter used for sale

CNC TUBE CUTTING LINE. Brand: Maco. Model: K370R. Year: 2005. Description: MACO pipe cutting line with feed ramp, grade cutting, negative and positive CNC. Approximate width of about 13,000 mm x 2,000 mm deep. Measurements for shipment: 1 package of 1,300 x 7,000 x 2,100 mm and 1 package of 6,500 x 1,500 x 2,100 mm. Technical Specifications: • Cutting range: from 0° to 60°. • Includes a 6 meter bar loader and a 6 meter ramp/exit belt. • Cutting capacity: Ø 8–100 mm. • Disc diameter: 250–370 mm. • Magazine capacity: 4,000 kg / 6,000 mm. • Minimum cutting length: 5 mm. • Disc rotation speed: 50–100 rpm (variable: 10–120 rpm). • Disc motor power: 3.5 kW (5.5 kW). • Maximum jaw opening: 140 mm. Features: • The machine performs loading and unloading automatically. • Programming is carried out from the control panel located on the machine its ...

Auction-ID: A1-48478-18

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 € : 122.59 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

: neu : 2026 : 090209 : prompt, Zwischenverkauf v : Italien : 7780 € : 150.15 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 555.81 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 € : 2009.83 € : 150 mm : 1000 mm : 1900 mm : 1475 mm : 2700 kg : 170 cm³ : 150 x 7,1 mm : 6 x 7,11 mm : 150 x 9 mm : 141,3 x 6,55 mm : 141,3 x 6,55 mm : 168,3 x 9 mm : 168,3 x 9 mm : 64 x 6 mm : 88,9 x 3,65 mm : 110 mm : 150 x 45 stehend, 150 x 6 mm : 800 mm : 100 mm : 10 mm : 1 U/min : 15 kW TCPlus Control with 7 Touchscreen Programmable bending speed for each individual bend Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 € : 216.96 € : 5 kW : 265 kg : 10-114 mm : 2 : 3-22 m/s : (2x) 50 x 940 mm to grind and polish for round and oval tubes opening of sanding belts by footpedal machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 € : 209.28 € : 60 mm : 595 mm : 363 mm : 900 mm : 130 kg : 10.5 cm³ : 60 x 3 mm : 2Gas x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 4 mm : 60 x 4 mm : 64 x 4 mm : 64 x 4 mm : 60 x 4 mm : 50 x 4 mm : 35 mm : 60x30x4 stehend, 60x40x5 mm : 300 mm : 10 mm : 10 mm : 1,25 / 2,50 U/min : 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

<br><br><br>Still in operation: Yes<br>Available: immediately

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000

; ready

1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Seydelmann K 90 DC-8, 90 liters bowl cutter, all stainless steel, variable knife speed, 2 bowl speeds, variable mixing speeds forwards and reverse, knife shaft brake electrically operated, noise reduction cover, loading device, unloader, in very good condition. The machine is immediatley available and can be tested in our facility in Koblenz, Germany.

Knife for cutter LASKA type K-200 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

Rühle SR 1 dicer, performance 0,8t/h, grid set variable adjustable, 1 cutting knife. The machine is immediately available and can be tested in Koblenz, Germany.

Cardboard scissors Biagosch & Brandau Manufacturer Biagosch & Brandau, Hamburg Cutting width: 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With pull-out tray for clippings

Stephan MCHD 30-II micro cutter

Magurit frozen meat cutter

Producer: INOTEC Type: WT97-RNSV Power: 2,5 kW Weight: approx. 400 kg Length x width x height: 998 x 850 x 1740 mm Sausage cutter INOTEC type WT 97 - RNSV , directly from the customer, without table - Caliber from 17 to 46 mm - Adjustable speed of 0.25 m/s up to 0.8 m/s Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

tool adaptor: VDI 40 weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Yawa TYM 790 Age: 2015 DESCRIPTION: Max. sheet: 790 x 560 mm, Min. sheet: 310 x 210 mm, Max. die-cutting area: 750 x 520 mm, Max. hot-stamping area: 760 x 525 mm, 3 longitudinal foil shafts, 2 transversal foil shafts, 6 x separately adjustable heating zones Features: Efficient and easy to operate. Delivers accurate, adjustable impression for foil stamping, embossing and die cutting. Five pull foil feeds are fully programmable to provide maximum versatility and excellent foil economy. Air blast system helps to separate foil from stock on critical jobs. Accurate and programmable control system with servo motor and encoder. Micrometer adjustment on side guide and front gripper guide. Mechanical dwell on impression guarantees perfect foil stamping/foil embossing performance. Missed sheet detector. Honeycomb base is convenient for loading. 6 heating zones with digital control. 24 ...

Control Board A1

Treif Husky CE dual purpose cutting machine, precise dicing and cutting with one machine, automatic start-up device, cut dices, strips, slices and portions. The machine is currently in the refurbishment and you are very welcome to test the machine at our office in Koblenz, Germany.

Ruhle Dicer SR 2 Turbo, loading device for euro boxes, discharge-conveyor belt, touch PC control,different grid sets, cutting temperature: from -5°C to +80°C, capacity: max. 3000 kg/h. The machine is currently in the refurbishment and will be available soon. You are welcome to test it in Koblenz, Germany.

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-4020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1950.0 kg - Maximum load: 4000.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syst ...

Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.

Producer: Bizerba Type: S-110 Connection: 230 V Steaker and strip cutter BIZERBA type S-110 -40 round knife -Blade spacing 4 mm Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

VIRO StyroDesign XL-2 EPS cutting machine was built in 2011 in Slovenia by VIRO pakirni stroji d. o. o. The machine is used for precision cutting of materials such as EPS blocks, using hot resistance wires. The process is extremely fast and efficient thanks to the use of a large number of 2000 mm long wires. The machining parameters are programmed in the state-of-the-art SytroDesignPRO software, which, thanks to the optimisation of the cutting layouts, significantly facilitates process management and reduces material losses. All this makes the StyroDesign XL-2 styrofoam cutting machine an excellent choice for the production of, among others, insulation components and other prefabricated building components. Technical specifications of VIRO StyroDesign XL-2 foam cutting machine - software: StyroDesign PRO - cutting angle: 90° - cutting speed: up to 2.5 m/min - ability to cut at an ...

NFM L200IV 200L universal mixer Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. The ...

Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000