tube cutter used for sale

FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 90 mm Exclusions from supply (even when visible on photos): The equipment is supplied without test equipment and electronics, in particular without: - Ultrasonic system incl. digitization- test process Krautkrämer and measuring devices - Ultrasonic measuring device- Length differences >500 mm Sorting out Krautkrämer- Förster Defectomat continuous spool- Replacement mix-up test Krautkrämer

FEEDSTOCK TUBE   external diameter min.: 60 mm   external diameter max.: 180 mm   length min.: 3000 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 50 mm   external diameter max.: 168 mm   length min.: 4000 mm   lenght max.: 12500 mm CHARACTERISTICS DRAWING MACHINE   force: 2000 kN   drawing length max.: 12500 mm   number of parallel trains / strands max.: 1   speed max.: 40 m/min   etching device: yes Function: Automatic (towing carriage moving forwards and backwards, front bench horizontal)Products: Round tubes, precision tubes, cardan shaftsmax. drawing rod / pointed end diameter: 120 mmmin. drawing rod / pointed end diameter:  33 mmmax. drawing rod / pointed end length: 240 mmmin. drawing rod / pointed end length: 20 ...

FEEDSTOCK TUBE   external diameter min.: 22 mm   external diameter max.: 140 mm   wall thickness min.: 1 mm   wall thickness max.: 14 mm   length min.: 4500 mm   lenght max.: 12500 mm Exclusions from supply (even when visible on photos): The equipment is supplied without test equipment and electronics, in particular without: - LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM - Replacement demagnetization Nukem- Replacement inspection electronics

FEEDSTOCK TUBE   external diameter min.: 38 mm   external diameter max.: 130 mm   length min.: 3000 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   length min.: 4000 mm   lenght max.: 13500 mm CHARACTERISTICS DRAWING MACHINE   force: 550 kN   drawing length max.: 13500 mm   number of parallel trains / strands max.: 3   speed max.: 100 m/min   pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter:  22 mmmax. drawing rod / pointed end leng ...

CONTROLS   PLC SIEMENS S5 115 U FEEDSTOCK TUBE   external diameter min.: 18 mm   external diameter max.: 127 mm   length min.: 3000 mm   lenght max.: 12000 mm Modernized:1996 pipe length increased from 8.5 to 12 meters2000 cross chain added on the rightmin. base length of hexagonal bundles: 150 mmmax. base length of hexagonal bundles: 350 mmmax. bundle weight: 4'000 kgmax. tube weight: 30 kg/m incl. scale BUSCH EMWincl. data recording station BUSCH 875

FEEDSTOCK TUBE   external diameter min.: 25 mm   external diameter max.: 55 mm   length min.: 3500 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   length min.: 5000 mm   lenght max.: 13500 mm CHARACTERISTICS DRAWING MACHINE   force: 320 kN   drawing length max.: 13500 mm   number of parallel trains / strands max.: 3   speed max.: 100 m/min Function: Automatic (manual threading, pull chain runs forwards and backwards, front bench can be swiveled vertically) Products: Round tubes (mostly shock absorbers), semi-finished or finished products Modernized: 1999 new pulling belt and brake 2022 pulling chain partially renewed max. drawing rod / pointed end diameter: 40 mm min. drawing rod / pointed end diameter: 14 mm max. drawing rod / pointed end length: 170 mm min. drawing rod / pointed en ...

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 20 mm   external diameter max.: 30 mm   length min.: 250 mm   lenght max.: 700 mm System consists of:+ COMPINA A2.19153 handling system, year 2000+ MAE M-AH 6 automatic pipe straightening machine, year 2012+ Bühlmann (system construction), year 2000

TECHNICAL SPECIFICATION   Max. diameter of tube: 65 mm   Max. wall thickness: 2 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5400 mm   space requirements -front/back-: 1550 mm   total height: 1500 mm   total weight approx.: 6500 kg + 8-axis CNC pipe and wire bender + CNC controlled feeder with pneumatic grippers + separate servo drives for   A-axis:  rotation unit 35 mm   B-axis:  bending heand   C-axis:  feeder   D-axis:  mandrel device   L-axis:  slide rail   P-axis:  chucking device   V-axis:  counter holder   Y-axis:  bending   Z-axis:  bend ...

FEEDSTOCK TUBE   external diameter min.: 20 mm   external diameter max.: 110 mm   length min.: 400 mm   lenght max.: 1700 mm PRESS FORCES   total force (nominal): 40 to System consists of: + WICK handling system, YoM 2012 + ABB IRB 6650S-90/3.9 handling robot, YoM 2012 + MAE M-AH 6 automatic pipe straightening machine, YoM 2012

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 221 mm   sheet width min.: 58 mm   sheet thickness max.: 8 mm   sheet thickness min.: 1 mm   exterior coil diameter max.: 2100 mm   exterior coil diameter min.: 1600 mm   internal coil diameter max.: 610 mm   internal coil diameter min.: 508 mm   coil weight max.: 6000 kg PRODUCT (PROFILE, TUBE)   external diameter min.: 22 mm   external diameter max.: 65 mm   length min.: 4500 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 100 m/min   feedstock transport direction: left to right Line consists of: - Band Preparation VAI-SEUTHE BV  ...

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 40 mm   external diameter max.: 150 mm   length min.: 260 mm   lenght max.: 1500 mm ELECTRICAL SPECIFICATIONS   total power consumption: 155 kW   mains power supply: 280 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007 Exclusions from supply (even if visible on photos)- without chip breaker - without laser marking system

CONTROLS   PLC SIEMENS FEEDSTOCK TUBE   external diameter min.: 20 mm   external diameter max.: 35 mm   length min.: 70 mm   lenght max.: 250 mm The system is designed for hardening, drying and oiling cam tubes. The bunkers are loaded and unloaded manually. The system automatically removes the cam tubes from the loading bunker and places them automatically in the unloading bunker. The cycle time depends on various parameters, such as workpiece length, workpiece diameter, number of hardening zones, lengths of the hardening zones and the hardening depth. The complete system consists of: 1 x base frame with collecting tray for the quenching medium 1 x lifting beam for simultaneous infeed and outfeed of the cam tubes 1 x horizontal slide with servo geared motor for holding the HF oscillating circuit transformer for 4-fold inductor and 2x 4- ...

CONTROLS   PLC SIEMENS S5 FEEDSTOCK TUBE   external diameter min.: 20 mm   external diameter max.: 38 mm   wall thickness min.: 2 mm   wall thickness max.: 4 mm   length min.: 52 mm   lenght max.: 200 mm System consists of:+ BÜHLMANN (system construction), YoM 1997+ BACHMANN ABB robot cell, YoM 2014+ BROTHER TC-S2DN-0 CNC machining center, YoM 2012

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 59 mm   external diameter max.: 100 mm   wall thickness min.: 1.5 mm   wall thickness max.: 3 mm   length min.: 3000 mm   lenght max.: 12000 mm PRODUCT (PROFILE, TUBE)   length min.: 400 mm   lenght max.: 1500 mm System consists of:+ ASMAG pipe cutting system+ HU 32-WS-HU3-SP250 forming system+ ABB stacking stationmax. bundle weight: 5'000 kgmax. bundle diameter: 800 mmABB robot working area: 4500 x 4100 x 2500 mm

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 60 mm   external diameter max.: 80 mm   wall thickness max.: 25 mm PRODUCT (PROFILE, TUBE)   length min.: 400 mm   lenght max.: 1000 mm ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW   mains power supply: 200 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ VAI SEUTHE TM90-3.0 cut-to-length line, YoM 2002+ BÜLTMANN tube bundle loader incl. cut-off head , YoM 1990 + FELSS axial forming system, YoM 1997+ Hydromation unloading system, YoM 1997Cycle time approx. 20 sec.max. diameter reduction: 30 mm

Max.width of cutting: 530 mm Temperature of meat block: up to -20 C Control panel mounted on the machine Instaled power: 4 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 100 Lenght: 165 Height: 195 Delivery time: 30 working days after advanced payment

Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

REF-1059 CHOP CUTTER CRM NEXUS 220 Manufacturer: CRM (COSTRUZIONI-REVISIONI-MECCANICHE) Model: Nexus 220 Year: 2003 Entirely built in stainless steel Power: 4kW 220/380V, 50Hz. Three-phase Inner dimensions: - Max. piece length: 900mm - Max. piece height: 260mm - Max. piece width: 220mm Outside dimensions: Length 2,130mm, width 800mm, height 1,200mm

WOHLENBERG 115 PAPER CUTTER Manufacturer: Wohlenberg Type: 115 Year of production: 2001 Max. Paper size: 115 cm Available immediately

General SKU391T1169 LocationBarneveld Make(unknown: missing typeplate) Main Features MaterialStainless steel Volume23 Ltr. Motor2.2 KW Specified Features - Cutter Cuttercheck Bowl cuttercheck Capacitymax. ± 23 Ltr. Diameter360 mm Depth230 mm With scrapercheck Inletdia. 210 mm Outlet290x120 mm Motor2,2 kW Speedscrapers: ± 141-142,5 mm, dicers: ± 564-570 rpm, slicers: ± 846-855 rpm MaterialAluminum bronze, Stainless steel 1.4301 (304) Information Mounted on framecheck With switchcheck Floorspace1,0x1,3 m Total height1,53 m Weight560 kg Extra Specificationswith extra rotor and knifesCutters-Mills > CuttersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...

General SKU354T1001 LocationBarneveld MakeUrschel TypeGK No.2017 Year of construction1983 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Cutter Cuttercheck Continuous cuttercheck Number of knife blades8-25 With scrapercheck Inlet460x250 mm Outlet180x Motor1,5 kW With variable speed drivecheck MaterialStainless steel Information Mounted on framecheck With switchcheck Weight470 kg Floorspace1,87x1,17 m Total height1,2 m Extra SpecificationsTYPES OF CUTS: SLICES: 1.6 to 19.1 mm DICES: A slicing knife, crosscut knife spindle and circular knife spindle are used for dicing. Changing the size of the cubes is done by using the required cutting spindles and adjusting the slice thickness. :Slice thickness: 3.2 to 19.1 mm  :Crosscut knives: 7.1 to 22.2 mm  :Circular knives: 2.4 to 76 mm STRIP CUTS: To make strip cuts, only the slicing knife a ...

General SKU094Y625 LocationBarneveld MakeCondux TypeHR9/N3 No.92 Year of construction1988 Main Features MaterialStainless steel Motor13 KW Specified Features - Cutter MaterialStainless steel Cutters GrinderSlicer/chipper (1x) Rotor sizedia. 900mm Inlet480x160mm, Outlet 700x250mm Motor± 13,0 KW Information Floorspace1,3x1,2 M Total height1,8 MCuttersConduxMills > CuttersBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU010H020 LocationBarneveld MakeUrschel Laboratories Inc. Valparaiso USA TypeComitrol MG-1700 No.1512 Year of constructionunknown Main Features MaterialStainless steel Motor22 KW Specified Features - Cutter MaterialStainless steel CutterComitrol processor Knife diameterdia. 150mm With hoppercheck Inletdia. 300mm Motor22,0 KW, 380 Volt Information Mounted on framecheck Floorspace1,3x0,6 M Total height2,0 M Weight380 KGCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU010H018 LocationBarneveld MakeUrschel Laboratories Inc. Valparaiso USA TypeMG-1700 No.1173 Year of constructionunknown Main Features MaterialStainless steel Motor22 KW Specified Features - Cutter MaterialStainless steel CutterComitrol processor Knife diameterdia. 150mm Inlet150 Motor22,0 KW, 380 Volt Information Mounted on framecheck Floorspace1,3x0,6 M Total height2,0 M Weight380 KGCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU004Y068 LocationBarneveld MakeAlexanderwerk TypeGKM No.21313 Year of constructionunknown Main Features MaterialStainless steel Motor1.3 KW Specified Features - Vegetable cutter MaterialAluminium, Stainless steel Vegetable cutter/Planetary mixer (1x) With motor1,1/1,3 KW, 380 Volt With hoppercheck Information Mounted on legscheck Mounted on wheelscheck With switchcheck Extra Specifications- With Schneidaufsatz - With Zweikammeraufsatz - With Planeten-Rühr- und Schlagmaschine type PMA-20 Vegetable cuttersAlexanderwerkMills > Vegetable cuttersBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm

1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

<br><br><br>Still in operation: Yes<br>Available: immediately

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000

; ready

Seydelmann K 90 DC-8, 90 liters bowl cutter, all stainless steel, variable knife speed, 2 bowl speeds, variable mixing speeds forwards and reverse, knife shaft brake electrically operated, noise reduction cover, loading device, unloader, in very good condition. The machine is immediatley available and can be tested in our facility in Koblenz, Germany.

Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm

Producer: Wolfking Description: Microcutter Wolfking E 160 MAN -Total power 55 KW -Output 6000 kg/h - machine without pump

Type: FPS 40 Capacity 40-60 szt./min Weighting range 11-700 g Width 650 mm Haight 1758 mm Lenght 2876 mm Freqency 400V-3F-50Hz Total power 1,0 kW Air consumption ( 8 bar) 700 l/min Weight 630 kg

With step-less variable speed controls for both knife and conveyor speed, the BD75LA is a flexible and dynamic solution to cutting leafy salads, herbs, long bodied vegetables and fruits. Able to output material at thicknesses anywhere between 1 and 15mm, this machine boasts an impressive versatility. An with an output of 250 kg. per hour — the BD75LA is capable of meeting high throughput demands with exceptional reliability. Technical Details Capacity/ Hour: 250 kg. Speed: Variable Output Thickness: 1-15 mm Dimensions: 100 x 74 x 125 cm Power: 0.8 kW Key Features ? Hygienic, heavy-duty design ? Adjustable thickness of 1-15mm ? Continuous feed conveyor belt ? Stepless variable speed controls ? Easy installation ? Single phase power ? Stainless steel chassis ? Stainless steel blades

Cardboard scissors Biagosch & Brandau Manufacturer Biagosch & Brandau, Hamburg Cutting width: 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With pull-out tray for clippings

Producer: INOTEC Type: WT97-RNSV Power: 2,5 kW Weight: approx. 400 kg Length x width x height: 998 x 850 x 1740 mm Sausage cutter INOTEC type WT 97 - RNSV , directly from the customer - Caliber from 17 to 46 mm - Adjustable speed of 0.25 m/s up to 0.8 m/s Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

DATA ON THE MACHINE Machine type: Ironing saw Manufacturer: RUCOCO Model: RBS 230 Condition: used Price 575 Euro net plus VAT Location Warstein , Germany Reference M-RUC-1220 Description We offer you a used ironing saw from the manufacturer RUCOCO incl. 6 spare saw blades (also for stainless steel) Coolant plant Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!